From: Greg KH <gregkh@linuxfoundation.org>
To: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>,
Martin Peres <martin.peres@labri.fr>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: resume fails to light display on Macbook Pro Retina on 3.8-rc1
Date: Sun, 24 Feb 2013 21:52:18 -0800 [thread overview]
Message-ID: <20130225055218.GA1205@kroah.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 6037 bytes --]
Hi Ben,
My Macbook Pro Retina fails to resume properly on 3.8. I tracked this
down to commit 6c5a04249d7afeea3e0ed971e7813f84e29a1706 (drm/nvd0/disp:
move link training helpers into core as display methods)
Anything I can try to help solve this?
Note, I'm using the Intel driver as the main controller for this laptop,
well, I think I am, my xorg log is attached.
And sorry for not reporting this sooner, it took me a long time to
bisect down, there were other resume and boot issues on the bisect trail
leading to this, the full log is below.
thanks,
greg k-h
git bisect start
# good: [29594404d7fe73cd80eaa4ee8c43dcc53970c60e] Linux 3.7
git bisect good 29594404d7fe73cd80eaa4ee8c43dcc53970c60e
# bad: [19f949f52599ba7c3f67a5897ac6be14bfcb1200] Linux 3.8
git bisect bad 19f949f52599ba7c3f67a5897ac6be14bfcb1200
# good: [dadfab4873256d2145640c0ce468fcbfb48977fe] Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
git bisect good dadfab4873256d2145640c0ce468fcbfb48977fe
# bad: [992956189de58cae9f2be40585bc25105cd7c5ad] efi: Fix the build with user namespaces enabled.
git bisect bad 992956189de58cae9f2be40585bc25105cd7c5ad
# skip: [2b8318881ddbcb67c5e8d2178b42284749442222] Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux
git bisect skip 2b8318881ddbcb67c5e8d2178b42284749442222
# good: [da22f22e91f0d14d996c7258101575a5a06ddf85] ssb: add ssb_chipco_gpio_pull{up,down}
git bisect good da22f22e91f0d14d996c7258101575a5a06ddf85
# good: [bb523fc08d4a4a726c7555be7800735685888b3c] drm/i915: convert PIPE_CLK_SEL to transcoder
git bisect good bb523fc08d4a4a726c7555be7800735685888b3c
# good: [d3e4ea017a414a19ab11a10b52e80a0c8b3f1670] [media] em28xx-cards: fix a warning
git bisect good d3e4ea017a414a19ab11a10b52e80a0c8b3f1670
# good: [3fcb6eb4063ab4eef05601c266afa2af667c8e1f] video: exynos_dp: remove redundant parameters
git bisect good 3fcb6eb4063ab4eef05601c266afa2af667c8e1f
# good: [c5b005ab7091c9ef4ca9b47569a8e27e54588933] drbd: use bitmap_parse instead of __bitmap_parse
git bisect good c5b005ab7091c9ef4ca9b47569a8e27e54588933
# skip: [c13e69b2f0e1e2da41a175c7e9215659842cbef9] Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
git bisect skip c13e69b2f0e1e2da41a175c7e9215659842cbef9
# good: [c8241969b44438c9335b59d375b627214bc36483] drm/i915: pass adjusted_mode to intel_choose_pipe_bpp_dither(), again
git bisect good c8241969b44438c9335b59d375b627214bc36483
# skip: [c5258190c2ae664cdf367417a2a25e5fa4104322] Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
git bisect skip c5258190c2ae664cdf367417a2a25e5fa4104322
# good: [24ebb37e6515d999bb27f5f8de6ff30faa7479f5] HID: i2c-hid: change I2C name
git bisect good 24ebb37e6515d999bb27f5f8de6ff30faa7479f5
# good: [189e11731aa858597095fbe1e6d243bad26bd96b] x86: pvclock: add note about rdtsc barriers
git bisect good 189e11731aa858597095fbe1e6d243bad26bd96b
# skip: [75e300c8ba5864367634d946c729d8fd05c1cbc2] Merge tag 'for-v3.8' of git://git.infradead.org/users/cbou/linux-pstore
git bisect skip 75e300c8ba5864367634d946c729d8fd05c1cbc2
# good: [08ff32352d6ff7083533dc1c25618d42f92ec28e] mlx4: 64-byte CQE/EQE support
git bisect good 08ff32352d6ff7083533dc1c25618d42f92ec28e
# skip: [e81d372ff9f694e13fa46e8b5aaed505c7fd2a1f] Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
git bisect skip e81d372ff9f694e13fa46e8b5aaed505c7fd2a1f
# good: [fc8d7547b1e19e1bb8f3206837ee0c7c6538e2e5] RDMA/nes: Fix for sending fpdus in order to hardware
git bisect good fc8d7547b1e19e1bb8f3206837ee0c7c6538e2e5
# good: [4247bfe20ab1cb8cf1874b811c0dc60bcd0249e8] Merge remote-tracking branch 'regulator/topic/stub' into regulator-next
git bisect good 4247bfe20ab1cb8cf1874b811c0dc60bcd0249e8
# good: [5028ea04c8a8a67fe73f18f5f34386730c9c1bf2] OMAPDSS: Remove acb and acbi fields from omap_dss_device
git bisect good 5028ea04c8a8a67fe73f18f5f34386730c9c1bf2
# good: [986836503e49ccf7e84b813715d344964ec93566] Merge branch 'drbd-8.4_ed6' into for-3.8-drivers-drbd-8.4_ed6
git bisect good 986836503e49ccf7e84b813715d344964ec93566
# bad: [9add1ac3dd256ad12e266f8403daf928be19953f] Merge branch 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux into drm-next
git bisect bad 9add1ac3dd256ad12e266f8403daf928be19953f
# good: [1f2285d462c02ef9b82ee9c553a31884c23994f0] drm/nouveau/clk: fix crystal frequency retrieval on nv25
git bisect good 1f2285d462c02ef9b82ee9c553a31884c23994f0
# bad: [bd3b49f25a3eae2d91432247b7565489120b6bcf] drm: tegra: Add maintainers entry
git bisect bad bd3b49f25a3eae2d91432247b7565489120b6bcf
# bad: [6c8e4633d351f6f794c8a5c03f19e8d5a25f9639] drm/nouveau/dp: move core link training calls to common code
git bisect bad 6c8e4633d351f6f794c8a5c03f19e8d5a25f9639
# good: [b6caea505879c4a606cf364442fd1f06f6c40e30] drm/nouveau/bios: implement BIT 'U' table (and subtable) parsing in core
git bisect good b6caea505879c4a606cf364442fd1f06f6c40e30
# skip: [ed58aee93c45d5095253d9bc370b418e3d767940] drm/nvd0/disp: handle DP transfer unit setup from second supervisor interrupt
git bisect skip ed58aee93c45d5095253d9bc370b418e3d767940
# skip: [4a230fa61884ffe6b6a806563eee82f12a60fa1e] drm/nvd0/disp: calculate U script id in supervisor interrupt
git bisect skip 4a230fa61884ffe6b6a806563eee82f12a60fa1e
# bad: [0a9e2b959f2a1673ca9315df8e0b6dec1069060e] drm/nvd0/disp: move HDA codec setup to core
git bisect bad 0a9e2b959f2a1673ca9315df8e0b6dec1069060e
# good: [cbe7270d48670889a88705478a68d000b0bc3f6e] drm/nouveau/core: expose full method calling capabilities with nv_exec
git bisect good cbe7270d48670889a88705478a68d000b0bc3f6e
# bad: [6c5a04249d7afeea3e0ed971e7813f84e29a1706] drm/nvd0/disp: move link training helpers into core as display methods
git bisect bad 6c5a04249d7afeea3e0ed971e7813f84e29a1706
# good: [fb445b3c23a4ae75190e814d952be6dce6181abe] drm/nouveau/core: allow representing method ranges in nouveau_omthds
git bisect good fb445b3c23a4ae75190e814d952be6dce6181abe
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/plain, Size: 38654 bytes --]
[ 5.617]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 5.617]
X.Org X Server 1.13.2.901 (1.13.3 RC 1)
Release Date: 2013-02-15
[ 5.617] X Protocol Version 11, Revision 0
[ 5.617] Build Operating System: Linux 3.7.5-1-ARCH x86_64
[ 5.617] Current Operating System: Linux mb 3.7.0-rc4-test+ #86 SMP PREEMPT Sun Feb 24 20:53:20 PST 2013 x86_64
[ 5.617] Kernel command line: root=/dev/sda5 ro
[ 5.617] Build Date: 18 February 2013 03:52:56PM
[ 5.617]
[ 5.617] Current version of pixman: 0.28.2
[ 5.617] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.617] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.617] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 24 21:39:10 2013
[ 5.619] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.620] (==) No Layout section. Using the first Screen section.
[ 5.620] (==) No screen section available. Using defaults.
[ 5.620] (**) |-->Screen "Default Screen Section" (0)
[ 5.620] (**) | |-->Monitor "<default monitor>"
[ 5.620] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.620] (==) Automatically adding devices
[ 5.620] (==) Automatically enabling devices
[ 5.620] (==) Automatically adding GPU devices
[ 5.623] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 5.623] Entry deleted from font path.
[ 5.624] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 5.624] Entry deleted from font path.
[ 5.624] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 5.624] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 5.624] Entry deleted from font path.
[ 5.624] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 5.624] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 5.624] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.624] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.624] (II) Loader magic: 0x7fcc20
[ 5.624] (II) Module ABI versions:
[ 5.624] X.Org ANSI C Emulation: 0.4
[ 5.624] X.Org Video Driver: 13.1
[ 5.624] X.Org XInput driver : 18.0
[ 5.624] X.Org Server Extension : 7.0
[ 5.625] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.205] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.212] (--) PCI: (0:0:2:0) 8086:0166:106b:00f7 rev 9, Mem @ 0xc1400000/4194304, 0xb0000000/268435456, I/O @ 0x00003000/64
[ 7.212] (--) PCI:*(0:1:0:0) 10de:0fd5:106b:00f2 rev 161, Mem @ 0xc0000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 7.213] Initializing built-in extension Generic Event Extension
[ 7.213] Initializing built-in extension SHAPE
[ 7.213] Initializing built-in extension MIT-SHM
[ 7.213] Initializing built-in extension XInputExtension
[ 7.213] Initializing built-in extension XTEST
[ 7.213] Initializing built-in extension BIG-REQUESTS
[ 7.213] Initializing built-in extension SYNC
[ 7.213] Initializing built-in extension XKEYBOARD
[ 7.213] Initializing built-in extension XC-MISC
[ 7.213] Initializing built-in extension SECURITY
[ 7.213] Initializing built-in extension XINERAMA
[ 7.213] Initializing built-in extension XFIXES
[ 7.213] Initializing built-in extension RENDER
[ 7.213] Initializing built-in extension RANDR
[ 7.213] Initializing built-in extension COMPOSITE
[ 7.213] Initializing built-in extension DAMAGE
[ 7.213] Initializing built-in extension MIT-SCREEN-SAVER
[ 7.213] Initializing built-in extension DOUBLE-BUFFER
[ 7.213] Initializing built-in extension RECORD
[ 7.213] Initializing built-in extension DPMS
[ 7.213] Initializing built-in extension X-Resource
[ 7.213] Initializing built-in extension XVideo
[ 7.213] Initializing built-in extension XVideo-MotionCompensation
[ 7.213] Initializing built-in extension XFree86-VidModeExtension
[ 7.213] Initializing built-in extension XFree86-DGA
[ 7.213] Initializing built-in extension XFree86-DRI
[ 7.213] Initializing built-in extension DRI2
[ 7.213] (II) LoadModule: "glx"
[ 7.217] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.219] (II) Module glx: vendor="X.Org Foundation"
[ 7.219] compiled for 1.13.2.901, module version = 1.0.0
[ 7.219] ABI class: X.Org Server Extension, version 7.0
[ 7.219] (==) AIGLX enabled
[ 7.219] Loading extension GLX
[ 7.219] (==) Matched nouveau as autoconfigured driver 0
[ 7.219] (==) Matched nvidia as autoconfigured driver 1
[ 7.219] (==) Matched nv as autoconfigured driver 2
[ 7.219] (==) Matched intel as autoconfigured driver 3
[ 7.219] (==) Matched nouveau as autoconfigured driver 4
[ 7.219] (==) Matched nvidia as autoconfigured driver 5
[ 7.219] (==) Matched nv as autoconfigured driver 6
[ 7.219] (==) Matched vesa as autoconfigured driver 7
[ 7.219] (==) Matched modesetting as autoconfigured driver 8
[ 7.219] (==) Matched fbdev as autoconfigured driver 9
[ 7.219] (==) Assigned the driver to the xf86ConfigLayout
[ 7.219] (II) LoadModule: "nouveau"
[ 7.220] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 7.223] (II) Module nouveau: vendor="X.Org Foundation"
[ 7.223] compiled for 1.13.1, module version = 1.0.6
[ 7.223] Module class: X.Org Video Driver
[ 7.223] ABI class: X.Org Video Driver, version 13.1
[ 7.223] (II) LoadModule: "nvidia"
[ 7.223] (WW) Warning, couldn't open module nvidia
[ 7.223] (II) UnloadModule: "nvidia"
[ 7.223] (II) Unloading nvidia
[ 7.223] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 7.223] (II) LoadModule: "nv"
[ 7.223] (WW) Warning, couldn't open module nv
[ 7.223] (II) UnloadModule: "nv"
[ 7.223] (II) Unloading nv
[ 7.223] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7.223] (II) LoadModule: "intel"
[ 7.224] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.228] (II) Module intel: vendor="X.Org Foundation"
[ 7.228] compiled for 1.13.2.901, module version = 2.21.3
[ 7.228] Module class: X.Org Video Driver
[ 7.228] ABI class: X.Org Video Driver, version 13.1
[ 7.228] (II) LoadModule: "vesa"
[ 7.228] (WW) Warning, couldn't open module vesa
[ 7.228] (II) UnloadModule: "vesa"
[ 7.228] (II) Unloading vesa
[ 7.228] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 7.228] (II) LoadModule: "modesetting"
[ 7.228] (WW) Warning, couldn't open module modesetting
[ 7.228] (II) UnloadModule: "modesetting"
[ 7.228] (II) Unloading modesetting
[ 7.228] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 7.228] (II) LoadModule: "fbdev"
[ 7.229] (WW) Warning, couldn't open module fbdev
[ 7.229] (II) UnloadModule: "fbdev"
[ 7.229] (II) Unloading fbdev
[ 7.229] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.229] (II) NOUVEAU driver
[ 7.229] (II) NOUVEAU driver for NVIDIA chipset families :
[ 7.229] RIVA TNT (NV04)
[ 7.229] RIVA TNT2 (NV05)
[ 7.229] GeForce 256 (NV10)
[ 7.229] GeForce 2 (NV11, NV15)
[ 7.229] GeForce 4MX (NV17, NV18)
[ 7.229] GeForce 3 (NV20)
[ 7.229] GeForce 4Ti (NV25, NV28)
[ 7.229] GeForce FX (NV3x)
[ 7.229] GeForce 6 (NV4x)
[ 7.229] GeForce 7 (G7x)
[ 7.229] GeForce 8 (G8x)
[ 7.229] GeForce GTX 200 (NVA0)
[ 7.229] GeForce GTX 400 (NVC0)
[ 7.230] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 7.230] (++) using VT number 1
[ 7.231] (II) [drm] nouveau interface version: 1.1.0
[ 7.231] (II) Loading sub module "dri"
[ 7.231] (II) LoadModule: "dri"
[ 7.231] (II) Module "dri" already built-in
[ 7.231] (II) NOUVEAU(0): Loaded DRI module
[ 7.231] (--) NOUVEAU(0): Chipset: "NVIDIA NVe7"
[ 7.231] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.231] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 7.231] (==) NOUVEAU(0): RGB weight 888
[ 7.231] (==) NOUVEAU(0): Default visual is TrueColor
[ 7.231] (==) NOUVEAU(0): Using HW cursor
[ 7.231] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 7.231] (==) NOUVEAU(0): Page flipping enabled
[ 7.231] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 7.238] (II) NOUVEAU(0): Output eDP-2 has no monitor section
[ 7.242] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 7.246] (II) NOUVEAU(0): Output DP-2 has no monitor section
[ 7.249] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 7.253] (II) NOUVEAU(0): EDID for output eDP-2
[ 7.253] (II) NOUVEAU(0): Manufacturer: APP Model: a00f Serial#: 0
[ 7.253] (II) NOUVEAU(0): Year: 2011 Week: 16
[ 7.253] (II) NOUVEAU(0): EDID Version: 1.4
[ 7.253] (II) NOUVEAU(0): Digital Display Input
[ 7.253] (II) NOUVEAU(0): 8 bits per channel
[ 7.253] (II) NOUVEAU(0): Digital interface is DisplayPort
[ 7.253] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 7.253] (II) NOUVEAU(0): Gamma: 2.20
[ 7.253] (II) NOUVEAU(0): No DPMS capabilities specified
[ 7.253] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4
[ 7.253] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 7.253] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[ 7.253] (II) NOUVEAU(0): redX: 0.653 redY: 0.334 greenX: 0.300 greenY: 0.620
[ 7.253] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312 whiteY: 0.329
[ 7.253] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 7.253] (II) NOUVEAU(0): Supported detailed timing:
[ 7.253] (II) NOUVEAU(0): clock: 337.8 MHz Image Size: 331 x 207 mm
[ 7.253] (II) NOUVEAU(0): h_active: 2880 h_sync: 2928 h_sync_end 2960 h_blank_end 3040 h_border: 0
[ 7.253] (II) NOUVEAU(0): v_active: 1800 v_sync: 1803 v_sync_end 1809 v_blanking: 1852 v_border: 0
[ 7.253] (II) NOUVEAU(0): Monitor name: Color LCD
[ 7.253] (II) NOUVEAU(0): EDID (in hex):
[ 7.253] (II) NOUVEAU(0): 00ffffffffffff0006100fa000000000
[ 7.253] (II) NOUVEAU(0): 10150104a5211578026fb1a7554c9e25
[ 7.253] (II) NOUVEAU(0): 0c505400000001010101010101010101
[ 7.253] (II) NOUVEAU(0): 010101010101ef8340a0b00834703020
[ 7.253] (II) NOUVEAU(0): 36004bcf1000001a000000fc00436f6c
[ 7.253] (II) NOUVEAU(0): 6f72204c43440a202020000000100000
[ 7.253] (II) NOUVEAU(0): 00000000000000000000000000000010
[ 7.253] (II) NOUVEAU(0): 000000000000000000000000000000e7
[ 7.253] (II) NOUVEAU(0): Printing probed modes for output eDP-2
[ 7.253] (II) NOUVEAU(0): Modeline "2880x1800"x60.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 7.253] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 7.253] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 7.257] (II) NOUVEAU(0): EDID for output DP-1
[ 7.261] (II) NOUVEAU(0): EDID for output DP-2
[ 7.264] (II) NOUVEAU(0): EDID for output HDMI-1
[ 7.264] (II) NOUVEAU(0): Output eDP-2 connected
[ 7.264] (II) NOUVEAU(0): Output DP-1 disconnected
[ 7.264] (II) NOUVEAU(0): Output DP-2 disconnected
[ 7.264] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 7.264] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 7.264] (II) NOUVEAU(0): Output eDP-2 using initial mode 2880x1800
[ 7.264] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.264] (--) NOUVEAU(0): Virtual size is 2880x1800 (pitch 0)
[ 7.264] (**) NOUVEAU(0): Driver mode "2880x1800": 337.8 MHz (scaled from 0.0 MHz), 111.1 kHz, 60.0 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "2880x1800"x60.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 7.264] (**) NOUVEAU(0): Driver mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 59.9 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "1600x1200": 161.0 MHz (scaled from 0.0 MHz), 74.5 kHz, 59.9 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "1280x1024": 109.0 MHz (scaled from 0.0 MHz), 63.7 kHz, 59.9 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "1280x960": 101.2 MHz (scaled from 0.0 MHz), 59.7 kHz, 59.9 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 7.264] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 7.264] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 7.264] (==) NOUVEAU(0): DPI set to (96, 96)
[ 7.264] (II) Loading sub module "fb"
[ 7.264] (II) LoadModule: "fb"
[ 7.264] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.266] (II) Module fb: vendor="X.Org Foundation"
[ 7.266] compiled for 1.13.2.901, module version = 1.0.0
[ 7.266] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.266] (II) Loading sub module "exa"
[ 7.266] (II) LoadModule: "exa"
[ 7.266] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 7.267] (II) Module exa: vendor="X.Org Foundation"
[ 7.267] compiled for 1.13.2.901, module version = 2.6.0
[ 7.267] ABI class: X.Org Video Driver, version 13.1
[ 7.267] (II) Loading sub module "shadowfb"
[ 7.267] (II) LoadModule: "shadowfb"
[ 7.267] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 7.267] (II) Module shadowfb: vendor="X.Org Foundation"
[ 7.268] compiled for 1.13.2.901, module version = 1.0.0
[ 7.268] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.268] (==) intel(G0): Depth 24, (--) framebuffer bpp 32
[ 7.268] (==) intel(G0): RGB weight 888
[ 7.268] (==) intel(G0): Default visual is TrueColor
[ 7.268] (--) intel(G0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 7.268] (**) intel(G0): Relaxed fencing enabled
[ 7.268] (**) intel(G0): Wait on SwapBuffers? enabled
[ 7.268] (**) intel(G0): Triple buffering? enabled
[ 7.268] (**) intel(G0): Framebuffer tiled
[ 7.268] (**) intel(G0): Pixmaps tiled
[ 7.268] (**) intel(G0): 3D buffers tiled
[ 7.268] (**) intel(G0): SwapBuffers wait enabled
[ 7.268] (==) intel(G0): video overlay key set to 0x101fe
[ 7.293] (II) intel(G0): Output VGA1 has no monitor section
[ 7.320] (II) intel(G0): EDID for output VGA1
[ 7.320] (II) intel(G0): Output VGA1 disconnected
[ 7.320] (WW) intel(G0): No outputs definitely connected, trying again...
[ 7.320] (II) intel(G0): Output VGA1 disconnected
[ 7.320] (WW) intel(G0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 7.320] (II) intel(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.320] (II) intel(G0): Kernel page flipping support detected, enabling
[ 7.320] (==) intel(G0): DPI set to (96, 96)
[ 7.320] (II) Loading sub module "fb"
[ 7.320] (II) LoadModule: "fb"
[ 7.320] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.320] (II) Module fb: vendor="X.Org Foundation"
[ 7.320] compiled for 1.13.2.901, module version = 1.0.0
[ 7.320] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.320] (II) Loading sub module "dri2"
[ 7.320] (II) LoadModule: "dri2"
[ 7.320] (II) Module "dri2" already built-in
[ 7.320] (--) Depth 24 pixmap format is 32 bpp
[ 7.320] (II) intel(G0): [DRI2] Setup complete
[ 7.320] (II) intel(G0): [DRI2] DRI driver: i965
[ 7.320] (II) intel(G0): Allocated new frame buffer 2880x1800 stride 11776, tiled
[ 7.321] (II) UXA(256): Driver registered support for the following operations:
[ 7.321] (II) solid
[ 7.321] (II) copy
[ 7.321] (II) composite (RENDER acceleration)
[ 7.321] (II) put_image
[ 7.321] (II) get_image
[ 7.321] (==) intel(G0): Backing store disabled
[ 7.321] (==) intel(G0): Silken mouse enabled
[ 7.321] (II) intel(G0): Initializing HW Cursor
[ 7.321] (II) intel(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.322] (==) intel(G0): DPMS enabled
[ 7.322] (==) intel(G0): Intel XvMC decoder enabled
[ 7.322] (II) intel(G0): Set up textured video
[ 7.322] (II) intel(G0): [XvMC] xvmc_vld driver initialized.
[ 7.322] (II) intel(G0): direct rendering: DRI2 Enabled
[ 7.322] (==) intel(G0): hotplug detection: "enabled"
[ 7.323] (EE) NOUVEAU(0): Error creating GPU channel: -22
[ 7.323] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 7.323] (==) NOUVEAU(0): Backing store disabled
[ 7.323] (==) NOUVEAU(0): Silken mouse enabled
[ 7.323] (==) NOUVEAU(0): DPMS enabled
[ 7.323] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.323] (--) RandR disabled
[ 7.327] (II) AIGLX: Screen 0 is not DRI2 capable
[ 7.327] (II) AIGLX: Screen 0 is not DRI capable
[ 7.382] (II) AIGLX: Loaded and initialized swrast
[ 7.382] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 7.397] (II) NOUVEAU(0): NVEnterVT is called.
[ 7.400] (II) NOUVEAU(0): Setting screen physical size to 762 x 476
[ 7.400] resize called 2880 1800
[ 7.467] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 7.467] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.467] (II) LoadModule: "evdev"
[ 7.467] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.468] (II) Module evdev: vendor="X.Org Foundation"
[ 7.468] compiled for 1.13.0, module version = 2.7.3
[ 7.468] Module class: X.Org XInput Driver
[ 7.468] ABI class: X.Org XInput driver, version 18.0
[ 7.468] (II) Using input driver 'evdev' for 'Power Button'
[ 7.468] (**) Power Button: always reports core events
[ 7.469] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 7.469] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.469] (--) evdev: Power Button: Found keys
[ 7.469] (II) evdev: Power Button: Configuring as keyboard
[ 7.469] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 7.469] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7.469] (**) Option "xkb_rules" "evdev"
[ 7.469] (**) Option "xkb_model" "evdev"
[ 7.469] (**) Option "xkb_layout" "us"
[ 7.492] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 7.492] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.492] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.492] (**) Video Bus: always reports core events
[ 7.492] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 7.492] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.492] (--) evdev: Video Bus: Found keys
[ 7.492] (II) evdev: Video Bus: Configuring as keyboard
[ 7.492] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14/event14"
[ 7.492] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.492] (**) Option "xkb_rules" "evdev"
[ 7.492] (**) Option "xkb_model" "evdev"
[ 7.492] (**) Option "xkb_layout" "us"
[ 7.493] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 7.493] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.493] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.493] (**) Video Bus: always reports core events
[ 7.493] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 7.493] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.493] (--) evdev: Video Bus: Found keys
[ 7.493] (II) evdev: Video Bus: Configuring as keyboard
[ 7.493] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input13/event13"
[ 7.493] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 7.493] (**) Option "xkb_rules" "evdev"
[ 7.493] (**) Option "xkb_model" "evdev"
[ 7.493] (**) Option "xkb_layout" "us"
[ 7.494] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7.494] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.494] (II) Using input driver 'evdev' for 'Power Button'
[ 7.494] (**) Power Button: always reports core events
[ 7.494] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 7.494] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.494] (--) evdev: Power Button: Found keys
[ 7.494] (II) evdev: Power Button: Configuring as keyboard
[ 7.494] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 7.494] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 7.494] (**) Option "xkb_rules" "evdev"
[ 7.494] (**) Option "xkb_model" "evdev"
[ 7.494] (**) Option "xkb_layout" "us"
[ 7.495] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 7.495] (II) No input driver specified, ignoring this device.
[ 7.495] (II) This device may have been added with another device file.
[ 7.495] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 7.495] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7.495] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7.495] (**) Sleep Button: always reports core events
[ 7.495] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 7.495] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7.495] (--) evdev: Sleep Button: Found keys
[ 7.495] (II) evdev: Sleep Button: Configuring as keyboard
[ 7.495] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 7.495] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 7.495] (**) Option "xkb_rules" "evdev"
[ 7.495] (**) Option "xkb_model" "evdev"
[ 7.495] (**) Option "xkb_layout" "us"
[ 7.496] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.496] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[ 7.496] (II) No input driver specified, ignoring this device.
[ 7.496] (II) This device may have been added with another device file.
[ 7.496] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[ 7.496] (II) No input driver specified, ignoring this device.
[ 7.496] (II) This device may have been added with another device file.
[ 7.497] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[ 7.497] (II) No input driver specified, ignoring this device.
[ 7.497] (II) This device may have been added with another device file.
[ 7.497] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.497] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 7.497] (II) No input driver specified, ignoring this device.
[ 7.497] (II) This device may have been added with another device file.
[ 7.497] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event6)
[ 7.497] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[ 7.497] (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[ 7.497] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[ 7.497] (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event6"
[ 7.497] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x262
[ 7.497] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
[ 7.497] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
[ 7.497] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/input/input6/event6"
[ 7.497] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 11)
[ 7.497] (**) Option "xkb_rules" "evdev"
[ 7.497] (**) Option "xkb_model" "evdev"
[ 7.497] (**) Option "xkb_layout" "us"
[ 7.497] (II) config/udev: Adding input device bcm5974 (/dev/input/event7)
[ 7.497] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[ 7.497] (**) bcm5974: Applying InputClass "touchpad catchall"
[ 7.497] (**) bcm5974: Applying InputClass "Default clickpad buttons"
[ 7.497] (**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
[ 7.497] (II) LoadModule: "synaptics"
[ 7.497] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7.498] (II) Module synaptics: vendor="X.Org Foundation"
[ 7.498] compiled for 1.13.2, module version = 1.6.3
[ 7.498] Module class: X.Org XInput Driver
[ 7.498] ABI class: X.Org XInput driver, version 18.0
[ 7.498] (II) Using input driver 'synaptics' for 'bcm5974'
[ 7.498] (**) bcm5974: always reports core events
[ 7.498] (**) Option "Device" "/dev/input/event7"
[ 7.524] (II) synaptics: bcm5974: found clickpad property
[ 7.524] (--) synaptics: bcm5974: x-axis range -4750 - 5280
[ 7.524] (--) synaptics: bcm5974: y-axis range -150 - 6730
[ 7.524] (--) synaptics: bcm5974: pressure range 0 - 256
[ 7.524] (--) synaptics: bcm5974: finger width range 0 - 16
[ 7.524] (--) synaptics: bcm5974: buttons: left double triple
[ 7.524] (--) synaptics: bcm5974: Vendor 0x5ac Product 0x262
[ 7.524] (**) Option "TapButton1" "1"
[ 7.524] (**) Option "TapButton2" "2"
[ 7.524] (**) Option "TapButton3" "3"
[ 7.524] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[ 7.524] (--) synaptics: bcm5974: touchpad found
[ 7.524] (**) bcm5974: always reports core events
[ 7.540] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.2/input/input7/event7"
[ 7.540] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 12)
[ 7.540] (**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
[ 7.540] (**) synaptics: bcm5974: MaxSpeed is now 1.75
[ 7.540] (**) synaptics: bcm5974: AccelFactor is now 0.016
[ 7.540] (**) bcm5974: (accel) keeping acceleration scheme 1
[ 7.540] (**) bcm5974: (accel) acceleration profile 1
[ 7.540] (**) bcm5974: (accel) acceleration factor: 2.000
[ 7.540] (**) bcm5974: (accel) acceleration threshold: 4
[ 7.542] (--) synaptics: bcm5974: touchpad found
[ 7.542] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
[ 7.542] (**) bcm5974: Ignoring device from InputClass "touchpad ignore duplicates"
[ 7.543] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 7.543] (II) No input driver specified, ignoring this device.
[ 7.543] (II) This device may have been added with another device file.
[ 7.548] (II) config/udev: Adding input device (unnamed) (/dev/input/event12)
[ 7.549] (**) (unnamed): Applying InputClass "evdev pointer catchall"
[ 7.549] (II) Using input driver 'evdev' for '(unnamed)'
[ 7.549] (**) (unnamed): always reports core events
[ 7.549] (**) evdev: (unnamed): Device: "/dev/input/event12"
[ 7.549] (EE) evdev: (unnamed): Unable to open evdev device "/dev/input/event12".
[ 7.549] (EE) PreInit returned 2 for "(unnamed)"
[ 7.549] (II) UnloadModule: "evdev"
[ 7.549] (II) config/udev: Adding input device (unnamed) (/dev/input/mouse1)
[ 7.549] (II) No input driver specified, ignoring this device.
[ 7.549] (II) This device may have been added with another device file.
[ 7.549] (II) config/udev: Adding input device (unnamed) (/dev/input/event8)
[ 7.549] (**) (unnamed): Applying InputClass "evdev keyboard catchall"
[ 7.549] (II) Using input driver 'evdev' for '(unnamed)'
[ 7.549] (**) (unnamed): always reports core events
[ 7.549] (**) evdev: (unnamed): Device: "/dev/input/event8"
[ 7.550] (EE) evdev: (unnamed): Unable to open evdev device "/dev/input/event8".
[ 7.550] (EE) PreInit returned 2 for "(unnamed)"
[ 7.550] (II) UnloadModule: "evdev"
[ 7.550] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 15597408
[ 7.550] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 7.551] failed to find screen to remove
[ 7.551] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.551] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1/card1-eDP-2 0
[ 7.551] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1/card1-DP-1 0
[ 7.551] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1/card1-DP-2 0
[ 7.551] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1/card1-HDMI-A-1 0
[ 7.556] (II) NOUVEAU(0): EDID vendor "APP", prod id 40975
[ 7.556] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 7.556] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 8.119] (II) NOUVEAU(0): EDID vendor "APP", prod id 40975
[ 8.119] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 8.119] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 20.417] (II) NOUVEAU(0): EDID vendor "APP", prod id 40975
[ 20.417] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 20.417] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 20.707] (II) NOUVEAU(0): EDID vendor "APP", prod id 40975
[ 20.707] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 20.707] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 20.866] (II) NOUVEAU(0): EDID vendor "APP", prod id 40975
[ 20.866] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 20.866] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 38.697] (II) NOUVEAU(0): EDID vendor "APP", prod id 40975
[ 38.697] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 38.697] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 38.716] resize called 2880 1800
[ 39.006] (II) NOUVEAU(0): EDID vendor "APP", prod id 40975
[ 39.006] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 39.006] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 39.253] (II) NOUVEAU(0): EDID vendor "APP", prod id 40975
[ 39.253] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 39.253] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 39.913] (II) NOUVEAU(0): NVLeaveVT is called.
[ 46.883] (II) NOUVEAU(0): NVEnterVT is called.
[ 47.081] (II) NOUVEAU(0): EDID vendor "APP", prod id 40975
[ 47.081] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 47.081] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 47.150] (--) synaptics: bcm5974: touchpad found
[ 48.928] (II) NOUVEAU(0): EDID vendor "APP", prod id 40975
[ 48.928] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 48.928] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 48.950] resize called 2880 1800
next reply other threads:[~2013-02-25 5:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-25 5:52 Greg KH [this message]
2013-02-25 6:06 ` resume fails to light display on Macbook Pro Retina on 3.8-rc1 Dave Airlie
2013-02-25 6:21 ` Dave Airlie
2013-02-25 22:32 ` Greg KH
2013-02-26 3:45 ` Greg KH
2013-02-26 17:35 ` Greg KH
2013-02-26 18:11 ` James Courtier-Dutton
2013-02-26 18:22 ` Greg KH
2013-02-27 23:27 ` James Courtier-Dutton
2013-02-28 0:02 ` Greg KH
2013-02-28 0:31 ` James Courtier-Dutton
2013-02-27 4:02 ` Greg KH
2013-02-27 9:25 ` Ben Skeggs
2013-02-27 17:09 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130225055218.GA1205@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=airlied@linux.ie \
--cc=bskeggs@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.peres@labri.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.