[PATCH 1/2] arm: at91: dt: at91sam9x5: correct NAND pins comments

[plagnioj@jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)]

On 15:12 Mon 11 Mar     , Richard Genoud wrote:
> Comments on NAND pins where inverted.
> 
> Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Best Regards,
J.
> ---
> based on 3.9-rc2
> 
>  arch/arm/boot/dts/at91sam9x5.dtsi |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index aa98e64..9b5d048 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -238,8 +238,8 @@
>  				nand {
>  					pinctrl_nand: nand-0 {
>  						atmel,pins =
> -							<3 4 0x0 0x1	/* PD5 gpio RDY pin pull_up */
> -							 3 5 0x0 0x1>;	/* PD4 gpio enable pin pull_up */
> +							<3 4 0x0 0x1	/* PD4 gpio Chip Enable pin pull_up */
> +							 3 5 0x0 0x1>;	/* PD5 gpio RDY/BUSY pin pull_up */
>  					};
>  				};
>  
> -- 
> 1.7.2.5
>