All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	torvalds@linux-foundation.org, akpm@linux-foundation.org,
	stable@vger.kernel.org
Subject: [ 00/75] 3.8.4-stable review
Date: Mon, 18 Mar 2013 14:06:23 -0700	[thread overview]
Message-ID: <20130318210510.203500214@linuxfoundation.org> (raw)

This is the start of the stable review cycle for the 3.8.4 release.
There are 75 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed Mar 20 21:04:55 UTC 2013.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.8.4-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.8.4-rc1

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "drm/i915: reorder setup sequence to have irqs for output setup"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "drm/i915: enable irqs earlier when resuming"

YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
    6lowpan: Fix endianness issue in is_addr_link_local().

Mathias Krause <minipli@googlemail.com>
    dcbnl: fix various netlink info leaks

Mathias Krause <minipli@googlemail.com>
    rtnl: fix info leak on RTM_GETLINK request for VF devices

Mathias Krause <minipli@googlemail.com>
    bridge: fix mdb info leaks

Hannes Frederic Sowa <hannes@stressinduktion.org>
    ipv6: stop multicast forwarding to process interface scoped addresses

Cristian Bercaru <B43982@freescale.com>
    bridging: fix rx_handlers return code

Paul Moore <pmoore@redhat.com>
    netlabel: correctly list all the static label mappings

Vlad Yasevich <vyasevic@redhat.com>
    macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode.

Vlad Yasevich <vyasevic@redhat.com>
    team: unsyc the devices addresses when port is removed

Veaceslav Falico <vfalico@redhat.com>
    bonding: fire NETDEV_RELEASE event only on 0 slaves

Zang MingJie <zealot0630@gmail.com>
    vxlan: fix oops when delete netns containing vxlan

Eric Dumazet <edumazet@google.com>
    tun: add a missing nf_reset() in tun_net_xmit()

Neal Cardwell <ncardwell@google.com>
    tcp: fix double-counted receiver RTT when leaving receiver fast path

Lorenzo Colitti <lorenzo@google.com>
    net: ipv6: Don't purge default router if accept_ra=2

Cong Wang <amwang@redhat.com>
    rds: limit the size allocated by rds_message_alloc()

Huang, Xiong <xiong@qca.qualcomm.com>
    atl1c: restore buffer state

Guillaume Nault <g.nault@alphalink.fr>
    l2tp: Restore socket refcount when sendmsg succeeds

Guenter Roeck <linux@roeck-us.net>
    net/sctp: Validate parameter size for SCTP_GET_ASSOC_STATS

Guo Chao <yan@linux.vnet.ibm.com>
    loopdev: remove an user triggerable oops

Guo Chao <yan@linux.vnet.ibm.com>
    loopdev: fix a deadlock

Guo Chao <yan@linux.vnet.ibm.com>
    block: use i_size_write() in bd_set_size()

Amir Vadai <amirv@mellanox.com>
    net/mlx4_en: Disable RFS when running in SRIOV mode

Amir Vadai <amirv@mellanox.com>
    net/mlx4_en: Initialize RFS filters lock and list in init_netdev

Johan Hovold <jhovold@gmail.com>
    atmel_lcdfb: fix 16-bpp modes on older SOCs

Sam Ravnborg <sam@ravnborg.org>
    kbuild: fix make headers_check with make 3.80

Brian Norris <computersforpeace@gmail.com>
    mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY

Eric Sandeen <sandeen@redhat.com>
    btrfs: use rcu_barrier() to wait for bdev puts at unmount

Heiko Carstens <heiko.carstens@de.ibm.com>
    s390/mm: fix flush_tlb_kernel_range()

Martin Schwidefsky <schwidefsky@de.ibm.com>
    s390: critical section cleanup vs. machine checks

David Rientjes <rientjes@google.com>
    perf,x86: fix link failure for non-Intel configs

Linus Torvalds <torvalds@linux-foundation.org>
    perf,x86: fix wrmsr_on_cpu() warning on suspend/resume

Dan Carpenter <dan.carpenter@oracle.com>
    selinux: use GFP_ATOMIC under spin_lock

Matt Porter <mporter@ti.com>
    ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830

Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
    powerpc: Rename USER_ESID_BITS* to ESID_BITS*

Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
    powerpc: Update kernel VSID range

Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
    powerpc: Make VSID_BITS* dependency explicit

Benjamin Herrenschmidt <benh@kernel.crashing.org>
    powerpc: Fix cputable entry for 970MP rev 1.0

Benjamin Herrenschmidt <benh@kernel.crashing.org>
    powerpc: Fix STAB initialization

Marcin Jurkowski <marcin1j@gmail.com>
    w1: fix oops when w1_search is called from netlink connector

Johan Hovold <jhovold@gmail.com>
    w1-gpio: remove erroneous __exit and __exit_p()

Axel Lin <axel.lin@ingics.com>
    hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes

Guenter Roeck <linux@roeck-us.net>
    hwmon: (pmbus/ltc2978) Fix temperature reporting

Johan Hovold <jhovold@gmail.com>
    ARM: w1-gpio: fix erroneous gpio requests

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix missing error handling in snd_seq_timer_open()

Stephane Eranian <eranian@google.com>
    perf,x86: fix kernel crash with PEBS/BTS after suspend/resume

Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
    ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels

Scott Ashcroft <scott.ashcroft@talk21.com>
    Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards

Jiri Slaby <jslaby@suse.cz>
    TTY: do not reset master's packet mode

Jiri Slaby <jslaby@suse.cz>
    TTY: disable debugging warning

Ley Foon Tan <lftan@altera.com>
    tty/serial: Add support for Altera serial port

Paul Bolle <pebolle@tiscali.nl>
    tty: serial: fix typo "SERIAL_S3C2412"

Paul Bolle <pebolle@tiscali.nl>
    tty: serial: fix typo "ARCH_S5P6450"

Wang YanQing <udknight@gmail.com>
    serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller

Josh Boyer <jwboyer@redhat.com>
    serial: 8250: Keep 8250.<xxxx> module options functional after driver rename

Sean Young <sean@mess.org>
    tty/8250_pnp: serial port detection regression since v3.7

Lars-Peter Clausen <lars@metafoo.de>
    ext3: Fix format string issues

Kees Cook <keescook@chromium.org>
    signal: always clear sa_restorer on execve

Dan Williams <dcbw@redhat.com>
    qcserial: bind to DM/DIAG port on Gobi 1K devices

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: dt9812: use CR_CHAN() for channel number

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: Fix oops on resume from suspend.

Alan Stern <stern@rowland.harvard.edu>
    USB: EHCI: don't check DMA values in QH overlays

Alan Stern <stern@rowland.harvard.edu>
    USB: EHCI: work around silicon bug in Intel's EHCI controllers

Bjørn Mork <bjorn@mork.no>
    USB: storage: fix Huawei mode switching regression

Steve Conklin <sconklin@canonical.com>
    usb: serial: Add Rigblaster Advantage to device table

Christian Schmiedl <christian.schmiedl@gemalto.com>
    USB: added support for Cinterion's products AH6 and PLS8

Matwey V. Kornilov <matwey@sai.msu.ru>
    usb: cp210x new Vendor/Device IDs

Felipe Balbi <balbi@ti.com>
    usb: dwc3: core: don't forget to free coherent memory

Maxin B. John <maxin.john@enea.com>
    tools: usb: ffs-test: Fix build failure

Oliver Neukum <oneukum@suse.de>
    USB: cdc-wdm: fix buffer overflow

Bjørn Mork <bjorn@mork.no>
    USB: option: add Huawei E5331

Amit Shah <amit.shah@redhat.com>
    virtio: rng: disallow multiple device registrations, fixes crashes

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    xen/pciback: Don't disable a PCI device that is already disabled.

Dan Williams <dcbw@redhat.com>
    qcaux: add Franklin U600


-------------

Diffstat:

 .../devicetree/bindings/tty/serial/of-serial.txt   |   3 +
 Makefile                                           |   4 +-
 arch/arm/mach-at91/board-foxg20.c                  |   1 +
 arch/arm/mach-at91/board-stamp9g20.c               |   1 +
 arch/arm/mach-davinci/dma.c                        |   3 +
 arch/arm/mach-ixp4xx/vulcan-setup.c                |   1 +
 arch/arm/mach-kirkwood/board-dt.c                  |  24 +-
 arch/arm/mach-pxa/raumfeld.c                       |   1 +
 arch/powerpc/include/asm/mmu-hash64.h              | 128 ++++----
 arch/powerpc/kernel/cputable.c                     |   2 +-
 arch/powerpc/kernel/exceptions-64s.S               |  34 ++-
 arch/powerpc/kvm/book3s_64_mmu_host.c              |   4 +-
 arch/powerpc/mm/hash_utils_64.c                    |  22 +-
 arch/powerpc/mm/mmu_context_hash64.c               |  11 +-
 arch/powerpc/mm/pgtable_64.c                       |   2 +-
 arch/powerpc/mm/slb_low.S                          |  50 ++--
 arch/powerpc/mm/tlb_hash64.c                       |   2 +-
 arch/s390/include/asm/tlbflush.h                   |   2 -
 arch/s390/kernel/entry.S                           |   3 +-
 arch/s390/kernel/entry64.S                         |   5 +-
 arch/x86/kernel/cpu/perf_event_intel_ds.c          |  10 +
 arch/x86/power/cpu.c                               |   2 +
 drivers/block/loop.c                               |  24 +-
 drivers/char/hw_random/virtio-rng.c                |  13 +-
 drivers/gpu/drm/i915/i915_dma.c                    |  23 +-
 drivers/gpu/drm/i915/i915_drv.c                    |  13 +-
 drivers/gpu/drm/i915/i915_drv.h                    |   1 -
 drivers/gpu/drm/i915/i915_irq.c                    |   4 -
 drivers/hwmon/lineage-pem.c                        |   2 +
 drivers/hwmon/pmbus/ltc2978.c                      |  14 +-
 drivers/mtd/nand/nand_base.c                       |  16 +
 drivers/mtd/nand/nand_ids.c                        |  80 ++---
 drivers/net/bonding/bond_main.c                    |   5 +-
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c    |   2 +-
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c     |  16 +-
 drivers/net/macvlan.c                              |   1 +
 drivers/net/team/team.c                            |   2 +
 drivers/net/tun.c                                  |   2 +
 drivers/net/vxlan.c                                |   9 +
 drivers/staging/comedi/drivers/dt9812.c            |  16 +-
 drivers/staging/vt6656/main_usb.c                  |   4 -
 drivers/tty/pty.c                                  |   1 -
 drivers/tty/serial/8250/8250.c                     |  52 +++-
 drivers/tty/serial/8250/8250_pci.c                 |  21 +-
 drivers/tty/serial/8250/8250_pnp.c                 |  12 +-
 drivers/tty/serial/Kconfig                         |   4 +-
 drivers/tty/serial/of_serial.c                     |   6 +
 drivers/tty/tty_buffer.c                           |   2 +-
 drivers/usb/class/cdc-wdm.c                        |  23 +-
 drivers/usb/dwc3/core.c                            |   1 +
 drivers/usb/host/ehci-hcd.c                        |   6 +-
 drivers/usb/host/ehci-q.c                          |  36 ++-
 drivers/usb/serial/cp210x.c                        |  20 ++
 drivers/usb/serial/option.c                        |   5 +
 drivers/usb/serial/qcaux.c                         |   1 +
 drivers/usb/serial/qcserial.c                      |   7 +-
 drivers/usb/storage/initializers.c                 |  76 +----
 drivers/usb/storage/initializers.h                 |   4 +-
 drivers/usb/storage/unusual_devs.h                 | 329 ++++++++++++++++++++-
 drivers/video/atmel_lcdfb.c                        |  22 +-
 drivers/w1/masters/w1-gpio.c                       |   4 +-
 drivers/w1/w1.c                                    |   3 +-
 drivers/xen/xen-pciback/pciback_ops.c              |   3 +-
 fs/block_dev.c                                     |   4 +-
 fs/btrfs/volumes.c                                 |   6 +
 fs/ext3/super.c                                    |   4 +-
 include/linux/mtd/nand.h                           |   7 +
 include/linux/perf_event.h                         |   6 +
 include/uapi/linux/serial_core.h                   |   5 +-
 include/video/atmel_lcdc.h                         |   1 +
 kernel/signal.c                                    |   3 +
 net/bridge/br_mdb.c                                |   4 +
 net/core/dev.c                                     |   1 +
 net/core/rtnetlink.c                               |   1 +
 net/dcb/dcbnl.c                                    |   8 +
 net/ieee802154/6lowpan.h                           |   2 +-
 net/ipv4/tcp_input.c                               |   6 +-
 net/ipv6/ip6_input.c                               |   3 +-
 net/ipv6/route.c                                   |   3 +-
 net/l2tp/l2tp_ppp.c                                |   1 +
 net/netlabel/netlabel_unlabeled.c                  |  27 +-
 net/rds/message.c                                  |   3 +
 net/sctp/socket.c                                  |   6 +-
 scripts/Makefile.headersinst                       |  11 +-
 security/selinux/xfrm.c                            |   2 +-
 sound/core/seq/seq_timer.c                         |   8 +-
 tools/usb/ffs-test.c                               |   2 +-
 87 files changed, 920 insertions(+), 404 deletions(-)



             reply	other threads:[~2013-03-18 21:06 UTC|newest]

Thread overview: 106+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-18 21:06 Greg Kroah-Hartman [this message]
2013-03-18 21:06 ` [ 01/75] qcaux: add Franklin U600 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 02/75] xen/pciback: Dont disable a PCI device that is already disabled Greg Kroah-Hartman
2013-03-18 21:06 ` [ 03/75] virtio: rng: disallow multiple device registrations, fixes crashes Greg Kroah-Hartman
2013-03-18 21:06 ` [ 04/75] USB: option: add Huawei E5331 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 05/75] USB: cdc-wdm: fix buffer overflow Greg Kroah-Hartman
2013-03-18 21:06 ` [ 06/75] tools: usb: ffs-test: Fix build failure Greg Kroah-Hartman
2013-03-18 21:06 ` [ 07/75] usb: dwc3: core: dont forget to free coherent memory Greg Kroah-Hartman
2013-03-18 21:06 ` [ 08/75] usb: cp210x new Vendor/Device IDs Greg Kroah-Hartman
2013-03-18 21:06 ` [ 09/75] USB: added support for Cinterions products AH6 and PLS8 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 10/75] usb: serial: Add Rigblaster Advantage to device table Greg Kroah-Hartman
2013-03-18 21:06 ` [ 11/75] USB: storage: fix Huawei mode switching regression Greg Kroah-Hartman
2013-03-18 21:06 ` [ 12/75] USB: EHCI: work around silicon bug in Intels EHCI controllers Greg Kroah-Hartman
2013-03-19 16:34   ` Sven Joachim
2013-03-19 18:17     ` Alan Stern
2013-03-19 18:43       ` Sven Joachim
2013-03-19 20:10         ` Alan Stern
2013-03-19 20:28           ` Sven Joachim
2013-03-19 21:00             ` Alan Stern
2013-03-19 21:44               ` Sven Joachim
2013-03-20 20:08                 ` Greg Kroah-Hartman
2013-03-20 20:14                   ` Sven Joachim
2013-03-20 20:28                     ` Greg Kroah-Hartman
2013-03-20 20:41                       ` Alan Stern
2013-03-20 22:28                         ` Greg Kroah-Hartman
2013-03-21 14:35                           ` Alan Stern
2013-03-19 18:03   ` Stephen Warren
2013-03-18 21:06 ` [ 13/75] USB: EHCI: dont check DMA values in QH overlays Greg Kroah-Hartman
2013-03-18 21:06 ` [ 14/75] staging: vt6656: Fix oops on resume from suspend Greg Kroah-Hartman
2013-03-18 21:06 ` [ 15/75] staging: comedi: dt9812: use CR_CHAN() for channel number Greg Kroah-Hartman
2013-03-18 21:06 ` [ 16/75] qcserial: bind to DM/DIAG port on Gobi 1K devices Greg Kroah-Hartman
2013-03-18 21:06 ` [ 17/75] signal: always clear sa_restorer on execve Greg Kroah-Hartman
2013-03-18 21:06 ` [ 18/75] ext3: Fix format string issues Greg Kroah-Hartman
2013-03-18 21:06 ` [ 19/75] tty/8250_pnp: serial port detection regression since v3.7 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 20/75] serial: 8250: Keep 8250.<xxxx> module options functional after driver rename Greg Kroah-Hartman
2013-03-18 21:06 ` [ 21/75] serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller Greg Kroah-Hartman
2013-03-18 21:06 ` [ 22/75] tty: serial: fix typo "ARCH_S5P6450" Greg Kroah-Hartman
2013-03-18 21:06 ` [ 23/75] tty: serial: fix typo "SERIAL_S3C2412" Greg Kroah-Hartman
2013-03-18 21:06 ` [ 24/75] tty/serial: Add support for Altera serial port Greg Kroah-Hartman
2013-03-18 21:06 ` [ 25/75] TTY: disable debugging warning Greg Kroah-Hartman
2013-03-18 21:06 ` [ 26/75] TTY: do not reset masters packet mode Greg Kroah-Hartman
2013-03-18 21:06 ` [ 27/75] Fix 4 port and add support for 8 port Unknown PCI serial port cards Greg Kroah-Hartman
2013-03-18 21:06 ` [ 28/75] ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels Greg Kroah-Hartman
2013-03-18 21:06 ` [ 29/75] perf,x86: fix kernel crash with PEBS/BTS after suspend/resume Greg Kroah-Hartman
2013-03-18 21:11   ` Stephane Eranian
2013-03-18 21:20     ` Greg Kroah-Hartman
2013-03-18 21:35       ` Stephane Eranian
2013-03-18 23:00         ` Greg Kroah-Hartman
2013-03-18 21:06 ` [ 30/75] ALSA: seq: Fix missing error handling in snd_seq_timer_open() Greg Kroah-Hartman
2013-03-18 21:06 ` [ 31/75] ARM: w1-gpio: fix erroneous gpio requests Greg Kroah-Hartman
2013-03-18 21:06 ` [ 32/75] hwmon: (pmbus/ltc2978) Fix temperature reporting Greg Kroah-Hartman
2013-03-18 21:06 ` [ 33/75] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes Greg Kroah-Hartman
2013-03-18 21:06 ` [ 34/75] w1-gpio: remove erroneous __exit and __exit_p() Greg Kroah-Hartman
2013-03-18 21:06 ` [ 35/75] w1: fix oops when w1_search is called from netlink connector Greg Kroah-Hartman
2013-03-18 21:06 ` [ 36/75] powerpc: Fix STAB initialization Greg Kroah-Hartman
2013-03-18 21:07 ` [ 37/75] powerpc: Fix cputable entry for 970MP rev 1.0 Greg Kroah-Hartman
2013-03-18 21:07 ` [ 38/75] powerpc: Make VSID_BITS* dependency explicit Greg Kroah-Hartman
2013-03-18 21:07 ` [ 39/75] powerpc: Update kernel VSID range Greg Kroah-Hartman
2013-03-18 21:07 ` [ 40/75] powerpc: Rename USER_ESID_BITS* to ESID_BITS* Greg Kroah-Hartman
2013-03-18 21:07 ` [ 41/75] ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830 Greg Kroah-Hartman
2013-03-19 16:25   ` Luis Henriques
     [not found]   ` <f20a6d0dd7604c0fa6ed95604a8dfb35@DLEE70.ent.ti.com>
2013-03-19 17:27     ` Matt Porter
2013-03-19 18:25       ` Luis Henriques
2013-03-18 21:07 ` [ 42/75] selinux: use GFP_ATOMIC under spin_lock Greg Kroah-Hartman
2013-03-18 21:07 ` [ 43/75] perf,x86: fix wrmsr_on_cpu() warning on suspend/resume Greg Kroah-Hartman
2013-03-18 21:07 ` [ 44/75] perf,x86: fix link failure for non-Intel configs Greg Kroah-Hartman
2013-03-18 21:07 ` [ 45/75] s390: critical section cleanup vs. machine checks Greg Kroah-Hartman
2013-03-18 21:07 ` [ 46/75] s390/mm: fix flush_tlb_kernel_range() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 47/75] btrfs: use rcu_barrier() to wait for bdev puts at unmount Greg Kroah-Hartman
2013-03-18 21:07 ` [ 48/75] mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY Greg Kroah-Hartman
2013-03-18 21:07 ` [ 49/75] kbuild: fix make headers_check with make 3.80 Greg Kroah-Hartman
2013-03-18 21:07 ` [ 50/75] atmel_lcdfb: fix 16-bpp modes on older SOCs Greg Kroah-Hartman
2013-03-18 21:07 ` [ 51/75] net/mlx4_en: Initialize RFS filters lock and list in init_netdev Greg Kroah-Hartman
2013-03-18 21:07 ` [ 52/75] net/mlx4_en: Disable RFS when running in SRIOV mode Greg Kroah-Hartman
2013-03-18 21:07 ` [ 53/75] block: use i_size_write() in bd_set_size() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 54/75] loopdev: fix a deadlock Greg Kroah-Hartman
2013-03-18 21:07 ` [ 55/75] loopdev: remove an user triggerable oops Greg Kroah-Hartman
2013-03-18 21:07 ` [ 56/75] net/sctp: Validate parameter size for SCTP_GET_ASSOC_STATS Greg Kroah-Hartman
2013-03-18 21:07 ` [ 57/75] l2tp: Restore socket refcount when sendmsg succeeds Greg Kroah-Hartman
2013-03-18 21:07 ` [ 58/75] atl1c: restore buffer state Greg Kroah-Hartman
2013-03-18 21:07 ` [ 59/75] rds: limit the size allocated by rds_message_alloc() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 60/75] net: ipv6: Dont purge default router if accept_ra=2 Greg Kroah-Hartman
2013-03-18 21:07 ` [ 61/75] tcp: fix double-counted receiver RTT when leaving receiver fast path Greg Kroah-Hartman
2013-03-18 21:07 ` [ 62/75] tun: add a missing nf_reset() in tun_net_xmit() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 63/75] vxlan: fix oops when delete netns containing vxlan Greg Kroah-Hartman
2013-03-18 21:07 ` [ 64/75] bonding: fire NETDEV_RELEASE event only on 0 slaves Greg Kroah-Hartman
2013-03-18 21:07 ` [ 65/75] team: unsyc the devices addresses when port is removed Greg Kroah-Hartman
2013-03-18 21:07 ` [ 66/75] macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode Greg Kroah-Hartman
2013-03-18 21:07 ` [ 67/75] netlabel: correctly list all the static label mappings Greg Kroah-Hartman
2013-03-18 21:07 ` [ 68/75] bridging: fix rx_handlers return code Greg Kroah-Hartman
2013-03-18 21:07 ` [ 69/75] ipv6: stop multicast forwarding to process interface scoped addresses Greg Kroah-Hartman
2013-03-18 21:07 ` [ 70/75] bridge: fix mdb info leaks Greg Kroah-Hartman
2013-03-18 21:07 ` [ 71/75] rtnl: fix info leak on RTM_GETLINK request for VF devices Greg Kroah-Hartman
2013-03-18 21:07 ` [ 72/75] dcbnl: fix various netlink info leaks Greg Kroah-Hartman
2013-03-18 21:07 ` [ 73/75] 6lowpan: Fix endianness issue in is_addr_link_local() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 74/75] Revert "drm/i915: enable irqs earlier when resuming" Greg Kroah-Hartman
2013-03-27 15:45   ` Ilya Tumaykin
2013-03-27 16:52     ` Daniel Vetter
2013-03-18 21:07 ` [ 75/75] Revert "drm/i915: reorder setup sequence to have irqs for output setup" Greg Kroah-Hartman
2013-03-19  0:51 ` [ 00/75] 3.8.4-stable review Shuah Khan
2013-03-19  0:57   ` Greg Kroah-Hartman
2013-03-19  1:09     ` Shuah Khan
2013-03-19  2:00       ` Greg Kroah-Hartman
2013-03-19  4:00         ` Shuah Khan
2013-03-19  4:07           ` Greg Kroah-Hartman
2013-03-19 15:51             ` Shuah Khan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130318210510.203500214@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.