From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, "BjÞrn Mork" <bjorn@mork.no>,
fangxiaozhi@huawei.com
Subject: [ 08/40] USB: storage: fix Huawei mode switching regression
Date: Mon, 18 Mar 2013 14:10:46 -0700 [thread overview]
Message-ID: <20130318211016.868166650@linuxfoundation.org> (raw)
In-Reply-To: <20130318211016.254453918@linuxfoundation.org>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjørn Mork <bjorn@mork.no>
commit ab4b71644a26d1ab92b987b2fd30e17c25e89f85 upstream.
This reverts commit 200e0d99 ("USB: storage: optimize to match the
Huawei USB storage devices and support new switch command" and the
followup bugfix commit cd060956 ("USB: storage: properly handle
the endian issues of idProduct").
The commit effectively added a large number of Huawei devices to
the deprecated usb-storage mode switching logic. Many of these
devices have been in use and supported by the userspace
usb_modeswitch utility for years. Forcing the switching inside
the kernel causes a number of regressions as a result of ignoring
existing onfigurations, and also completely takes away the ability
to configure mode switching per device/system/user.
Known regressions caused by this:
- Some of the devices support multiple modes, using different
switching commands. There are existing configurations taking
advantage of this.
- There is a real use case for disabling mode switching and
instead mounting the exposed storage device. This becomes
impossible with switching logic inside the usb-storage driver.
- At least on device fail as a result of the usb-storage switching
command, becoming completely unswitchable. This is possibly a
firmware bug, but still a regression because the device work as
expected using usb_modeswitch defaults.
In-kernel mode switching was deprecated years ago with the
development of the more user friendly userspace alternatives. The
existing list of devices in usb-storage was only kept to prevent
breaking already working systems. The long term plan is to remove
the list, not to add to it. Ref:
http://permalink.gmane.org/gmane.linux.usb.general/28543
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: <fangxiaozhi@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/storage/initializers.c | 76 --------
drivers/usb/storage/initializers.h | 4
drivers/usb/storage/unusual_devs.h | 329 ++++++++++++++++++++++++++++++++++++-
3 files changed, 331 insertions(+), 78 deletions(-)
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -92,8 +92,8 @@ int usb_stor_ucr61s2b_init(struct us_dat
return 0;
}
-/* This places the HUAWEI usb dongles in multi-port mode */
-static int usb_stor_huawei_feature_init(struct us_data *us)
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
{
int result;
@@ -104,75 +104,3 @@ static int usb_stor_huawei_feature_init(
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
-
-/*
- * It will send a scsi switch command called rewind' to huawei dongle.
- * When the dongle receives this command at the first time,
- * it will reboot immediately. After rebooted, it will ignore this command.
- * So it is unnecessary to read its response.
- */
-static int usb_stor_huawei_scsi_init(struct us_data *us)
-{
- int result = 0;
- int act_len = 0;
- struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
- char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
- bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
- bcbw->Tag = 0;
- bcbw->DataTransferLength = 0;
- bcbw->Flags = bcbw->Lun = 0;
- bcbw->Length = sizeof(rewind_cmd);
- memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
- memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
-
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
- US_BULK_CB_WRAP_LEN, &act_len);
- US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
- return result;
-}
-
-/*
- * It tries to find the supported Huawei USB dongles.
- * In Huawei, they assign the following product IDs
- * for all of their mobile broadband dongles,
- * including the new dongles in the future.
- * So if the product ID is not included in this list,
- * it means it is not Huawei's mobile broadband dongles.
- */
-static int usb_stor_huawei_dongles_pid(struct us_data *us)
-{
- struct usb_interface_descriptor *idesc;
- int idProduct;
-
- idesc = &us->pusb_intf->cur_altsetting->desc;
- idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
- /* The first port is CDROM,
- * means the dongle in the single port mode,
- * and a switch command is required to be sent. */
- if (idesc && idesc->bInterfaceNumber == 0) {
- if ((idProduct == 0x1001)
- || (idProduct == 0x1003)
- || (idProduct == 0x1004)
- || (idProduct >= 0x1401 && idProduct <= 0x1500)
- || (idProduct >= 0x1505 && idProduct <= 0x1600)
- || (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
- return 1;
- }
- }
- return 0;
-}
-
-int usb_stor_huawei_init(struct us_data *us)
-{
- int result = 0;
-
- if (usb_stor_huawei_dongles_pid(us)) {
- if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
- result = usb_stor_huawei_scsi_init(us);
- else
- result = usb_stor_huawei_feature_init(us);
- }
- return result;
-}
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -46,5 +46,5 @@ int usb_stor_euscsi_init(struct us_data
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
-/* This places the HUAWEI usb dongles in multi-port mode */
-int usb_stor_huawei_init(struct us_data *us);
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1515,10 +1515,335 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x
/* Reported by fangxiaozhi <huananhu@huawei.com>
* This brings the HUAWEI data card devices into multi-port mode
*/
-UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
+UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
next prev parent reply other threads:[~2013-03-18 21:22 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-18 21:10 [ 00/40] 3.0.70-stable review Greg Kroah-Hartman
2013-03-18 21:10 ` [ 01/40] qcaux: add Franklin U600 Greg Kroah-Hartman
2013-03-18 21:10 ` [ 02/40] virtio: rng: disallow multiple device registrations, fixes crashes Greg Kroah-Hartman
2013-03-18 21:10 ` [ 03/40] USB: option: add Huawei E5331 Greg Kroah-Hartman
2013-03-18 21:10 ` [ 04/40] USB: cdc-wdm: fix buffer overflow Greg Kroah-Hartman
2013-03-18 21:10 ` [ 05/40] usb: cp210x new Vendor/Device IDs Greg Kroah-Hartman
2013-03-18 21:10 ` [ 06/40] USB: added support for Cinterions products AH6 and PLS8 Greg Kroah-Hartman
2013-03-18 21:10 ` [ 07/40] usb: serial: Add Rigblaster Advantage to device table Greg Kroah-Hartman
2013-03-18 21:10 ` Greg Kroah-Hartman [this message]
2013-03-18 21:10 ` [ 09/40] USB: EHCI: dont check DMA values in QH overlays Greg Kroah-Hartman
2013-03-18 21:10 ` [ 10/40] staging: vt6656: Fix oops on resume from suspend Greg Kroah-Hartman
2013-03-18 21:10 ` [ 11/40] signal: always clear sa_restorer on execve Greg Kroah-Hartman
2013-03-18 21:10 ` [ 12/40] ext3: Fix format string issues Greg Kroah-Hartman
2013-03-18 21:10 ` [ 13/40] tty: serial: fix typo "ARCH_S5P6450" Greg Kroah-Hartman
2013-03-18 21:10 ` [ 14/40] TTY: do not reset masters packet mode Greg Kroah-Hartman
2013-03-18 21:10 ` [ 15/40] md: protect against crash upon fsync on ro array Greg Kroah-Hartman
2013-03-18 21:10 ` [ 16/40] Revert duplicated perf commit Greg Kroah-Hartman
2013-03-21 3:31 ` Ben Hutchings
2013-03-18 21:10 ` [ 17/40] ALSA: seq: Fix missing error handling in snd_seq_timer_open() Greg Kroah-Hartman
2013-03-18 21:10 ` [ 18/40] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes Greg Kroah-Hartman
2013-03-18 21:10 ` [ 19/40] w1: fix oops when w1_search is called from netlink connector Greg Kroah-Hartman
2013-03-18 21:10 ` [ 20/40] powerpc: Fix cputable entry for 970MP rev 1.0 Greg Kroah-Hartman
2013-03-18 21:10 ` [ 21/40] selinux: use GFP_ATOMIC under spin_lock Greg Kroah-Hartman
2013-03-18 21:11 ` [ 22/40] perf,x86: fix kernel crash with PEBS/BTS after suspend/resume Greg Kroah-Hartman
2013-03-18 21:11 ` [ 23/40] perf,x86: fix wrmsr_on_cpu() warning on suspend/resume Greg Kroah-Hartman
2013-03-18 21:11 ` [ 24/40] perf,x86: fix link failure for non-Intel configs Greg Kroah-Hartman
2013-03-18 21:11 ` [ 25/40] s390/mm: fix flush_tlb_kernel_range() Greg Kroah-Hartman
2013-03-18 21:11 ` [ 26/40] btrfs: use rcu_barrier() to wait for bdev puts at unmount Greg Kroah-Hartman
2013-03-18 21:11 ` [ 27/40] drm/i915: EBUSY status handling added to i915_gem_fault() Greg Kroah-Hartman
2013-03-18 21:11 ` [ 28/40] hwmon: (sht15) Fix memory leak if regulator_enable() fails Greg Kroah-Hartman
2013-03-18 21:11 ` [ 29/40] block: use i_size_write() in bd_set_size() Greg Kroah-Hartman
2013-03-18 21:11 ` [ 30/40] loopdev: fix a deadlock Greg Kroah-Hartman
2013-03-18 21:11 ` [ 31/40] l2tp: Restore socket refcount when sendmsg succeeds Greg Kroah-Hartman
2013-03-18 21:11 ` [ 32/40] rds: limit the size allocated by rds_message_alloc() Greg Kroah-Hartman
2013-03-18 21:11 ` [ 33/40] net: ipv6: Dont purge default router if accept_ra=2 Greg Kroah-Hartman
2013-03-18 21:11 ` [ 34/40] tcp: fix double-counted receiver RTT when leaving receiver fast path Greg Kroah-Hartman
2013-03-18 21:11 ` [ 35/40] tun: add a missing nf_reset() in tun_net_xmit() Greg Kroah-Hartman
2013-03-18 21:11 ` [ 36/40] netlabel: correctly list all the static label mappings Greg Kroah-Hartman
2013-03-18 21:11 ` [ 37/40] bridging: fix rx_handlers return code Greg Kroah-Hartman
2013-03-18 21:11 ` [ 38/40] ipv6: stop multicast forwarding to process interface scoped addresses Greg Kroah-Hartman
2013-03-18 21:11 ` [ 39/40] rtnl: fix info leak on RTM_GETLINK request for VF devices Greg Kroah-Hartman
2013-03-18 21:11 ` [ 40/40] dcbnl: fix various netlink info leaks Greg Kroah-Hartman
2013-03-19 0:47 ` [ 00/40] 3.0.70-stable review Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130318211016.868166650@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=bjorn@mork.no \
--cc=fangxiaozhi@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.