From: Marek Vasut <marex@denx.de>
To: Hector Palacios <hector.palacios@digi.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Fabio Estevam <festevam@gmail.com>,
shawn.guo@linaro.org
Subject: Re: BUG: soft lockup when recording audio on MX28EVK with ASoC sgtl5000
Date: Mon, 25 Mar 2013 13:10:54 +0100 [thread overview]
Message-ID: <201303251310.55122.marex@denx.de> (raw)
In-Reply-To: <51502C87.8050902@digi.com>
Dear Hector Palacios,
CCing Shawn, this might also explain the touchscreen issue.
> Hello,
>
> I just tried recording audio on Freescale's MX28EVK that uses ASoC sgtl5000
> (kernel v3.8) with:
>
> arecord -M -f cd sound.wav --duration 10
>
> and got a scheduler message:
>
> [ 789.041847] [sched_delayed] sched: RT throttling activated
>
> The system then becomes nearly unresponsive and after some seconds the
> kernel complains of a soft lockup.
>
> [ 904.211821] BUG: soft lockup - CPU#0 stuck for 22s! [mdev:279]
> [ 904.217693] Modules linked in:
> [ 904.220776] irq event stamp: 1576636
> [ 904.224363] hardirqs last enabled at (1576635): [<c000ee28>]
> __irq_svc+0x48/0x54 [ 904.231903] hardirqs last disabled at (1576636):
> [<c000ee14>] __irq_svc+0x34/0x54 [ 904.239422] softirqs last enabled at
> (1575782): [<c0026138>] __do_softirq+0x13c/0x220 [ 904.247388] softirqs
> last disabled at (1575771): [<c002630c>] irq_exit+0x8c/0x94 [ 904.254821]
> [ 904.256328] Pid: 279, comm: mdev
> [ 904.260967] CPU: 0 Not tainted (3.8.0-00041-gbdf34c0-dirty #49)
> [ 904.267272] PC is at cpu_arm926_switch_mm+0x8/0x20
> [ 904.272089] LR is at flush_old_exec+0x340/0x5c0
> [ 904.276644] pc : [<c001a5c8>] lr : [<c00da6a0>] psr: 00000013
> [ 904.276644] sp : c6f73e60 ip : 00000000 fp : c0634c10
> [ 904.288138] r10: c779dd20 r9 : c77ac654 r8 : c779d5a0
> [ 904.293378] r7 : c6f0ac00 r6 : c77ac400 r5 : c6f72000 r4 : c779dd20
> [ 904.299918] r3 : 60000013 r2 : 00000000 r1 : c779d5a0 r0 : 46f7c000
> [ 904.306461] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment
> user [ 904.313613] Control: 0005317f Table: 46f78000 DAC: 00000015
> [ 904.319427] [<c001510c>] (unwind_backtrace+0x0/0xf4) from [<c006c4a8>]
> (watchdog_timer_fn+0x124/0x160)
> [ 904.328795] [<c006c4a8>] (watchdog_timer_fn+0x124/0x160) from
> [<c0042784>] (__run_hrtimer+0x7c/0x1e8)
> [ 904.338061] [<c0042784>] (__run_hrtimer+0x7c/0x1e8) from [<c0042c9c>]
> (hrtimer_interrupt+0x110/0x310)
> [ 904.347329] [<c0042c9c>] (hrtimer_interrupt+0x110/0x310) from
> [<c001ab80>] (mxs_timer_interrupt+0x1c/0x2
> 8)
> [ 904.357033] [<c001ab80>] (mxs_timer_interrupt+0x1c/0x28) from
> [<c006cb38>] (handle_irq_event_percpu+0x5c
> /0x26c)
> [ 904.367169] [<c006cb38>] (handle_irq_event_percpu+0x5c/0x26c) from
> [<c006cd84>] (handle_irq_event+0x3c/0
> x5c)
> [ 904.377039] [<c006cd84>] (handle_irq_event+0x3c/0x5c) from [<c006f3b0>]
> (handle_level_irq+0x8c/0x118)
> [ 904.386300] [<c006f3b0>] (handle_level_irq+0x8c/0x118) from [<c006cacc>]
> (generic_handle_irq+0x28/0x30)
> [ 904.395741] [<c006cacc>] (generic_handle_irq+0x28/0x30) from
> [<c001009c>] (handle_IRQ+0x30/0x84)
> [ 904.404568] [<c001009c>] (handle_IRQ+0x30/0x84) from [<c00086ec>]
> (icoll_handle_irq+0x30/0x44)
> [ 904.413220] [<c00086ec>] (icoll_handle_irq+0x30/0x44) from [<c000ee24>]
> (__irq_svc+0x44/0x54)
> [ 904.421761] Exception stack(0xc6f73e18 to 0xc6f73e60)
> [ 904.426834] 3e00:
> 46f7c000 c779d5a0
> [ 904.435043] 3e20: 00000000 60000013 c779dd20 c6f72000 c77ac400 c6f0ac00
> c779d5a0 c77ac654
> [ 904.443250] 3e40: c779dd20 c0634c10 00000000 c6f73e60 c00da6a0 c001a5c8
> 00000013 ffffffff
> [ 904.451472] [<c000ee24>] (__irq_svc+0x44/0x54) from [<c001a5c8>]
> (cpu_arm926_switch_mm+0x8/0x20)
> [ 904.460298] [<c001a5c8>] (cpu_arm926_switch_mm+0x8/0x20) from
> [<c6e740c0>] (0xc6e740c0) [ 936.211821] BUG: soft lockup - CPU#0 stuck
> for 21s! [arecord:264] [ 936.217952] Modules linked in:
> [ 936.221038] irq event stamp: 6749868
> [ 936.224624] hardirqs last enabled at (6749867): [<c000ee28>]
> __irq_svc+0x48/0x54 [ 936.232163] hardirqs last disabled at (6749868):
> [<c000ee14>] __irq_svc+0x34/0x54 [ 936.239681] softirqs last enabled at
> (6749012): [<c0026138>] __do_softirq+0x13c/0x220 [ 936.247644] softirqs
> last disabled at (6748999): [<c002630c>] irq_exit+0x8c/0x94 [ 936.255077]
> [ 936.256586] Pid: 264, comm: arecord
> [ 936.261223] CPU: 0 Not tainted (3.8.0-00041-gbdf34c0-dirty #49)
> [ 936.267528] PC is at cpu_arm926_switch_mm+0x8/0x20
> [ 936.272352] LR is at T.1273+0xf4/0x150
> [ 936.276125] pc : [<c001a5c8>] lr : [<c004c9d4>] psr: 00000013
> [ 936.276125] sp : c6ed1d98 ip : 00000000 fp : c6ed1dc4
> [ 936.287618] r10: c0455e0c r9 : c6ec91e0 r8 : 00000001
> [ 936.292857] r7 : c7430000 r6 : 00000000 r5 : c062e870 r4 : c6ed0000
> [ 936.299398] r3 : c6ec91e0 r2 : 20000013 r1 : c6ec91e0 r0 : 46ec4000
> [ 936.305942] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment
> user [ 936.313092] Control: 0005317f Table: 4776c000 DAC: 00000015
> [ 936.318906] [<c001510c>] (unwind_backtrace+0x0/0xf4) from [<c006c4a8>]
> (watchdog_timer_fn+0x124/0x160)
> [ 936.328273] [<c006c4a8>] (watchdog_timer_fn+0x124/0x160) from
> [<c0042784>] (__run_hrtimer+0x7c/0x1e8)
> [ 936.337539] [<c0042784>] (__run_hrtimer+0x7c/0x1e8) from [<c0042c9c>]
> (hrtimer_interrupt+0x110/0x310)
> [ 936.346806] [<c0042c9c>] (hrtimer_interrupt+0x110/0x310) from
> [<c001ab80>] (mxs_timer_interrupt+0x1c/0x2
> 8)
> [ 936.356509] [<c001ab80>] (mxs_timer_interrupt+0x1c/0x28) from
> [<c006cb38>] (handle_irq_event_percpu+0x5c
> /0x26c)
> [ 936.366647] [<c006cb38>] (handle_irq_event_percpu+0x5c/0x26c) from
> [<c006cd84>] (handle_irq_event+0x3c/0
> x5c)
> [ 936.376519] [<c006cd84>] (handle_irq_event+0x3c/0x5c) from [<c006f3b0>]
> (handle_level_irq+0x8c/0x118)
> [ 936.385781] [<c006f3b0>] (handle_level_irq+0x8c/0x118) from [<c006cacc>]
> (generic_handle_irq+0x28/0x30)
> [ 936.395222] [<c006cacc>] (generic_handle_irq+0x28/0x30) from
> [<c001009c>] (handle_IRQ+0x30/0x84)
> [ 936.404050] [<c001009c>] (handle_IRQ+0x30/0x84) from [<c00086ec>]
> (icoll_handle_irq+0x30/0x44)
> [ 936.412701] [<c00086ec>] (icoll_handle_irq+0x30/0x44) from [<c000ee24>]
> (__irq_svc+0x44/0x54)
> [ 936.421243] Exception stack(0xc6ed1d50 to 0xc6ed1d98)
> [ 936.426320] 1d40: 46ec4000 c6ec91e0
> 20000013 c6ec91e0
> [ 936.434527] 1d60: c6ed0000 c062e870 00000000 c7430000 00000001 c6ec91e0
> c0455e0c c6ed1dc4
> [ 936.442727] 1d80: 00000000 c6ed1d98 c004c9d4 c001a5c8 00000013 ffffffff
> [ 936.449389] [<c000ee24>] (__irq_svc+0x44/0x54) from [<c001a5c8>]
> (cpu_arm926_switch_mm+0x8/0x20)
> [ 936.458217] [<c001a5c8>] (cpu_arm926_switch_mm+0x8/0x20) from
> [<c6e303c0>] (0xc6e303c0)
>
> The system does not completely die but it is extremely slow and almost
> unusable, I checked that the mxs-saif interrupt (184) counter suddenly
> increased very quickly (from 288 to 45427 in one second, 94471 the next
> second, and so on). I was wondering if this happens in other platforms
> using this codec or if it is an MXS issue only.
>
> Best regards,
Best regards,
Marek Vasut
next prev parent reply other threads:[~2013-03-25 12:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-25 10:52 BUG: soft lockup when recording audio on MX28EVK with ASoC sgtl5000 Hector Palacios
2013-03-25 12:10 ` Marek Vasut [this message]
2013-03-25 15:25 ` Shawn Guo
2013-03-25 16:53 ` Hector Palacios
2013-03-25 19:31 ` Fabio Estevam
2013-03-25 19:31 ` Fabio Estevam
2013-03-25 23:15 ` Fabio Estevam
2013-03-26 11:43 ` Hector Palacios
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201303251310.55122.marex@denx.de \
--to=marex@denx.de \
--cc=festevam@gmail.com \
--cc=hector.palacios@digi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.