From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 13/13] sh-pfc: r8a73a4: Remove unused GPIO bias data
Date: Tue, 26 Mar 2013 13:51:53 +0000 [thread overview]
Message-ID: <20130326135153.31366.71152.sendpatchset@w520> (raw)
From: Magnus Damm <damm@opensource.se>
Remove unused pull-up/down data from the r8a73a4 PFC code.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
drivers/pinctrl/sh-pfc/pfc-r8a73a4.c | 176 ++--------------------------------
1 file changed, 15 insertions(+), 161 deletions(-)
--- 0017/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
+++ work/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c 2013-03-26 21:56:08.000000000 +0900
@@ -115,16 +115,6 @@ enum {
PORT_ALL(IN),
PINMUX_INPUT_END,
- /* PORT0_IN_PU -> PORT329_IN_PU */
- PINMUX_INPUT_PULLUP_BEGIN,
- PORT_ALL(IN_PU),
- PINMUX_INPUT_PULLUP_END,
-
- /* PORT0_IN_PD -> PORT329_IN_PD */
- PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_ALL(IN_PD),
- PINMUX_INPUT_PULLDOWN_END,
-
/* PORT0_OUT -> PORT329_OUT */
PINMUX_OUTPUT_BEGIN,
PORT_ALL(OUT),
@@ -438,156 +428,12 @@ enum {
PINMUX_MARK_END,
};
+#define _PORT_DATA(pfx, sfx) PORT_DATA_IO(pfx)
+#define PINMUX_DATA_ALL() CPU_ALL_PORT(_PORT_DATA, , unused)
+
static const pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
-
- PORT_DATA_IO_PU_PD(0), PORT_DATA_IO_PU_PD(1),
- PORT_DATA_IO_PU_PD(2), PORT_DATA_IO_PU_PD(3),
- PORT_DATA_IO_PU_PD(4), PORT_DATA_IO_PU_PD(5),
- PORT_DATA_IO_PU_PD(6), PORT_DATA_IO_PU_PD(7),
- PORT_DATA_IO_PU_PD(8), PORT_DATA_IO_PU_PD(9),
-
- PORT_DATA_IO_PU_PD(10), PORT_DATA_IO_PU_PD(11),
- PORT_DATA_IO_PU_PD(12), PORT_DATA_IO_PU_PD(13),
- PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
- PORT_DATA_IO_PU_PD(16), PORT_DATA_IO_PU_PD(17),
- PORT_DATA_IO_PU_PD(18), PORT_DATA_IO_PU_PD(19),
-
- PORT_DATA_IO_PU_PD(20), PORT_DATA_IO_PU_PD(21),
- PORT_DATA_IO_PU_PD(22), PORT_DATA_IO_PU_PD(23),
- PORT_DATA_IO_PU_PD(24), PORT_DATA_IO_PU_PD(25),
- PORT_DATA_IO_PU_PD(26), PORT_DATA_IO_PU_PD(27),
- PORT_DATA_IO_PU_PD(28), PORT_DATA_IO_PU_PD(29),
-
- PORT_DATA_IO_PU_PD(30), PORT_DATA_IO_PU_PD(32),
- PORT_DATA_IO_PU_PD(33), PORT_DATA_IO_PU_PD(34),
- PORT_DATA_IO_PU_PD(35), PORT_DATA_IO_PU_PD(36),
- PORT_DATA_IO_PU_PD(37), PORT_DATA_IO_PU_PD(38),
- PORT_DATA_IO_PU_PD(39), PORT_DATA_IO_PU_PD(40),
-
- PORT_DATA_IO_PU_PD(64), PORT_DATA_IO_PU_PD(65),
- PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67),
- PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69),
-
- PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71),
- PORT_DATA_IO_PU_PD(72), PORT_DATA_IO_PU_PD(73),
- PORT_DATA_O(74), PORT_DATA_IO_PU_PD(75),
- PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77),
- PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79),
-
- PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81),
- PORT_DATA_IO_PU_PD(82), PORT_DATA_IO_PU_PD(83),
- PORT_DATA_IO_PU_PD(84), PORT_DATA_IO_PU_PD(85),
-
- PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97),
- PORT_DATA_IO_PU_PD(98), PORT_DATA_IO_PU_PD(99),
-
- PORT_DATA_IO_PU_PD(100), PORT_DATA_IO_PU_PD(101),
- PORT_DATA_IO_PU_PD(102), PORT_DATA_IO_PU_PD(103),
- PORT_DATA_IO_PU_PD(104), PORT_DATA_IO_PU_PD(105),
- PORT_DATA_IO_PU_PD(106), PORT_DATA_IO_PU_PD(107),
- PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109),
-
- PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111),
- PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113),
- PORT_DATA_IO_PU_PD(114), PORT_DATA_IO_PU_PD(115),
- PORT_DATA_IO_PU_PD(116), PORT_DATA_IO_PU_PD(117),
- PORT_DATA_IO_PU_PD(118), PORT_DATA_IO_PU_PD(119),
-
- PORT_DATA_IO_PU_PD(120), PORT_DATA_IO_PU_PD(121),
- PORT_DATA_IO_PU_PD(122), PORT_DATA_IO_PU_PD(123),
- PORT_DATA_IO_PU_PD(124), PORT_DATA_IO_PU_PD(125),
- PORT_DATA_IO_PU_PD(126),
- PORT_DATA_IO_PU_PD(128), PORT_DATA_IO_PU_PD(129),
-
- PORT_DATA_IO_PU_PD(130), PORT_DATA_IO_PU_PD(131),
- PORT_DATA_IO_PU_PD(132), PORT_DATA_IO_PU_PD(133),
- PORT_DATA_IO_PU_PD(134),
-
- PORT_DATA_IO_PU_PD(160), PORT_DATA_IO_PU_PD(161),
- PORT_DATA_IO_PU_PD(162), PORT_DATA_IO_PU_PD(163),
- PORT_DATA_IO_PU_PD(164), PORT_DATA_IO_PU_PD(165),
- PORT_DATA_IO_PU_PD(166), PORT_DATA_IO_PU_PD(167),
- PORT_DATA_IO_PU_PD(168), PORT_DATA_IO_PU_PD(169),
-
- PORT_DATA_IO_PU_PD(170), PORT_DATA_IO_PU_PD(171),
- PORT_DATA_IO_PU_PD(172), PORT_DATA_IO_PU_PD(173),
- PORT_DATA_IO_PU_PD(174), PORT_DATA_IO_PU_PD(175),
- PORT_DATA_IO_PU_PD(176), PORT_DATA_IO_PU_PD(177),
- PORT_DATA_IO_PU_PD(178),
-
- PORT_DATA_IO_PU_PD(192), PORT_DATA_IO_PU_PD(193),
- PORT_DATA_IO_PU_PD(194), PORT_DATA_IO_PU_PD(195),
- PORT_DATA_IO_PU_PD(196), PORT_DATA_IO_PU_PD(197),
- PORT_DATA_IO_PU_PD(198), PORT_DATA_IO_PU_PD(199),
-
- PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201),
- PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203),
- PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205),
- PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PU_PD(207),
- PORT_DATA_IO_PU_PD(208), PORT_DATA_IO_PU_PD(209),
-
- PORT_DATA_IO_PU_PD(210), PORT_DATA_IO_PU_PD(211),
- PORT_DATA_IO_PU_PD(212), PORT_DATA_IO_PU_PD(213),
- PORT_DATA_IO_PU_PD(214), PORT_DATA_IO_PU_PD(215),
- PORT_DATA_IO_PU_PD(216), PORT_DATA_IO_PU_PD(217),
- PORT_DATA_IO_PU_PD(218), PORT_DATA_IO_PU_PD(219),
-
- PORT_DATA_IO_PU_PD(220), PORT_DATA_IO_PU_PD(221),
- PORT_DATA_IO_PU_PD(222), PORT_DATA_IO_PU_PD(224),
- PORT_DATA_IO_PU_PD(225), PORT_DATA_IO_PU_PD(226),
- PORT_DATA_IO_PU_PD(227), PORT_DATA_IO_PU_PD(228),
- PORT_DATA_IO_PU_PD(229),
-
- PORT_DATA_IO_PU_PD(230), PORT_DATA_IO_PU_PD(231),
- PORT_DATA_IO_PU_PD(232), PORT_DATA_IO_PU_PD(233),
- PORT_DATA_IO_PU_PD(234), PORT_DATA_IO_PU_PD(235),
- PORT_DATA_IO_PU_PD(236), PORT_DATA_IO_PU_PD(237),
- PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239),
-
- PORT_DATA_IO_PU_PD(240), PORT_DATA_IO_PU_PD(241),
- PORT_DATA_IO_PU_PD(242), PORT_DATA_IO_PU_PD(243),
- PORT_DATA_IO_PU_PD(244), PORT_DATA_IO_PU_PD(245),
- PORT_DATA_IO_PU_PD(246), PORT_DATA_IO_PU_PD(247),
- PORT_DATA_IO_PU_PD(248), PORT_DATA_IO_PU_PD(249),
-
- PORT_DATA_IO_PU_PD(250),
- PORT_DATA_IO_PU_PD(256), PORT_DATA_IO_PU_PD(257),
- PORT_DATA_IO_PU_PD(258), PORT_DATA_IO_PU_PD(259),
-
- PORT_DATA_IO_PU_PD(260), PORT_DATA_IO_PU_PD(261),
- PORT_DATA_IO_PU_PD(262), PORT_DATA_IO_PU_PD(263),
- PORT_DATA_IO_PU_PD(264), PORT_DATA_IO_PU_PD(265),
- PORT_DATA_IO_PU_PD(266), PORT_DATA_IO_PU_PD(267),
- PORT_DATA_IO_PU_PD(268), PORT_DATA_IO_PU_PD(269),
-
- PORT_DATA_IO_PU_PD(270), PORT_DATA_IO_PU_PD(271),
- PORT_DATA_IO_PU_PD(272), PORT_DATA_IO_PU_PD(273),
- PORT_DATA_IO_PU_PD(274), PORT_DATA_IO_PU_PD(275),
- PORT_DATA_IO_PU_PD(276), PORT_DATA_IO_PU_PD(277),
- PORT_DATA_IO_PU_PD(278), PORT_DATA_IO_PU_PD(279),
-
- PORT_DATA_IO_PU_PD(280), PORT_DATA_IO_PU_PD(281),
- PORT_DATA_IO_PU_PD(282), PORT_DATA_IO_PU_PD(283),
- PORT_DATA_O(288), PORT_DATA_IO_PU_PD(289),
-
- PORT_DATA_IO_PU_PD(290), PORT_DATA_IO_PU_PD(291),
- PORT_DATA_IO_PU_PD(292), PORT_DATA_IO_PU_PD(293),
- PORT_DATA_IO_PU_PD(294), PORT_DATA_IO_PU_PD(295),
- PORT_DATA_IO_PU_PD(296), PORT_DATA_IO_PU_PD(297),
- PORT_DATA_IO_PU_PD(298), PORT_DATA_IO_PU_PD(299),
-
- PORT_DATA_IO_PU_PD(300), PORT_DATA_IO_PU_PD(301),
- PORT_DATA_IO_PU_PD(302), PORT_DATA_IO_PU_PD(303),
- PORT_DATA_IO_PU_PD(304), PORT_DATA_IO_PU_PD(305),
- PORT_DATA_IO_PU_PD(306), PORT_DATA_IO_PU_PD(307),
- PORT_DATA_IO_PU_PD(308),
-
- PORT_DATA_IO_PU_PD(320), PORT_DATA_IO_PU_PD(321),
- PORT_DATA_IO_PU_PD(322), PORT_DATA_IO_PU_PD(323),
- PORT_DATA_IO_PU_PD(324), PORT_DATA_IO_PU_PD(325),
- PORT_DATA_IO_PU_PD(326), PORT_DATA_IO_PU_PD(327),
- PORT_DATA_IO_PU_PD(328), PORT_DATA_IO_PU_PD(329),
+ PINMUX_DATA_ALL(),
/* Port0 */
PINMUX_DATA(LCDD0_MARK, PORT0_FN1),
@@ -2043,8 +1889,18 @@ static const struct sh_pfc_function pinm
SH_PFC_FUNCTION(irqc),
};
-static const struct pinmux_cfg_reg pinmux_config_regs[] = {
+#undef PORTCR
+#define PORTCR(nr, reg) \
+ { \
+ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
+ _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT), \
+ PORT##nr##_FN0, PORT##nr##_FN1, \
+ PORT##nr##_FN2, PORT##nr##_FN3, \
+ PORT##nr##_FN4, PORT##nr##_FN5, \
+ PORT##nr##_FN6, PORT##nr##_FN7 } \
+ }
+static const struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000),
PORTCR(1, 0xe6050001),
PORTCR(2, 0xe6050002),
@@ -2707,8 +2563,6 @@ const struct sh_pfc_soc_info r8a73a4_pin
.ops = &r8a73a4_pinmux_ops,
.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
- .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
- .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
next reply other threads:[~2013-03-26 13:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 13:51 Magnus Damm [this message]
2013-03-26 16:12 ` [PATCH 13/13] sh-pfc: r8a73a4: Remove unused GPIO bias data Laurent Pinchart
2013-03-27 14:57 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130326135153.31366.71152.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.