From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Ben Hutchings <bhutchings@solarflare.com>
Subject: [ 23/72] sfc: Disable VF queues during register self-test
Date: Tue, 26 Mar 2013 15:51:06 -0700 [thread overview]
Message-ID: <20130326224922.091511429@linuxfoundation.org> (raw)
In-Reply-To: <20130326224919.675227837@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <bhutchings@solarflare.com>
[ Upstream commit d4f2cecce138c34960c467d0ae38a6d4bcd6af7b ]
Currently VF queues and drivers may remain active during this test.
This could cause memory corruption or spurious test failures.
Therefore we reset the port/function before running these tests on
Siena.
On Falcon this doesn't work: we have to do some additional
initialisation before some blocks will work again. So refactor the
reset/register-test sequence into an efx_nic_type method so
efx_selftest() doesn't have to consider such quirks.
In the process, fix another minor bug: Siena does not have an
'invisible' reset and the self-test currently fails to push the PHY
configuration after resetting. Passing RESET_TYPE_ALL to
efx_reset_{down,up}() fixes this.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/sfc/falcon.c | 35 +++++++++++++++++--
drivers/net/ethernet/sfc/net_driver.h | 7 ++-
drivers/net/ethernet/sfc/nic.c | 3 -
drivers/net/ethernet/sfc/selftest.c | 62 ++++++++--------------------------
drivers/net/ethernet/sfc/siena.c | 29 +++++++++++++--
5 files changed, 76 insertions(+), 60 deletions(-)
--- a/drivers/net/ethernet/sfc/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon.c
@@ -25,9 +25,12 @@
#include "io.h"
#include "phy.h"
#include "workarounds.h"
+#include "selftest.h"
/* Hardware control for SFC4000 (aka Falcon). */
+static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method);
+
static const unsigned int
/* "Large" EEPROM device: Atmel AT25640 or similar
* 8 KB, 16-bit address, 32 B write block */
@@ -1034,10 +1037,34 @@ static const struct efx_nic_register_tes
EFX_OWORD32(0x0003FF0F, 0x00000000, 0x00000000, 0x00000000) },
};
-static int falcon_b0_test_registers(struct efx_nic *efx)
+static int
+falcon_b0_test_chip(struct efx_nic *efx, struct efx_self_tests *tests)
{
- return efx_nic_test_registers(efx, falcon_b0_register_tests,
- ARRAY_SIZE(falcon_b0_register_tests));
+ enum reset_type reset_method = RESET_TYPE_INVISIBLE;
+ int rc, rc2;
+
+ mutex_lock(&efx->mac_lock);
+ if (efx->loopback_modes) {
+ /* We need the 312 clock from the PHY to test the XMAC
+ * registers, so move into XGMII loopback if available */
+ if (efx->loopback_modes & (1 << LOOPBACK_XGMII))
+ efx->loopback_mode = LOOPBACK_XGMII;
+ else
+ efx->loopback_mode = __ffs(efx->loopback_modes);
+ }
+ __efx_reconfigure_port(efx);
+ mutex_unlock(&efx->mac_lock);
+
+ efx_reset_down(efx, reset_method);
+
+ tests->registers =
+ efx_nic_test_registers(efx, falcon_b0_register_tests,
+ ARRAY_SIZE(falcon_b0_register_tests))
+ ? -1 : 1;
+
+ rc = falcon_reset_hw(efx, reset_method);
+ rc2 = efx_reset_up(efx, reset_method, rc == 0);
+ return rc ? rc : rc2;
}
/**************************************************************************
@@ -1820,7 +1847,7 @@ const struct efx_nic_type falcon_b0_nic_
.get_wol = falcon_get_wol,
.set_wol = falcon_set_wol,
.resume_wol = efx_port_dummy_op_void,
- .test_registers = falcon_b0_test_registers,
+ .test_chip = falcon_b0_test_chip,
.test_nvram = falcon_test_nvram,
.revision = EFX_REV_FALCON_B0,
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -68,6 +68,8 @@
#define EFX_TXQ_TYPES 4
#define EFX_MAX_TX_QUEUES (EFX_TXQ_TYPES * EFX_MAX_CHANNELS)
+struct efx_self_tests;
+
/**
* struct efx_special_buffer - An Efx special buffer
* @addr: CPU base address of the buffer
@@ -901,7 +903,8 @@ static inline unsigned int efx_port_num(
* @get_wol: Get WoL configuration from driver state
* @set_wol: Push WoL configuration to the NIC
* @resume_wol: Synchronise WoL state between driver and MC (e.g. after resume)
- * @test_registers: Test read/write functionality of control registers
+ * @test_chip: Test registers. Should use efx_nic_test_registers(), and is
+ * expected to reset the NIC.
* @test_nvram: Test validity of NVRAM contents
* @revision: Hardware architecture revision
* @mem_map_size: Memory BAR mapped size
@@ -947,7 +950,7 @@ struct efx_nic_type {
void (*get_wol)(struct efx_nic *efx, struct ethtool_wolinfo *wol);
int (*set_wol)(struct efx_nic *efx, u32 type);
void (*resume_wol)(struct efx_nic *efx);
- int (*test_registers)(struct efx_nic *efx);
+ int (*test_chip)(struct efx_nic *efx, struct efx_self_tests *tests);
int (*test_nvram)(struct efx_nic *efx);
int revision;
--- a/drivers/net/ethernet/sfc/nic.c
+++ b/drivers/net/ethernet/sfc/nic.c
@@ -126,9 +126,6 @@ int efx_nic_test_registers(struct efx_ni
unsigned address = 0, i, j;
efx_oword_t mask, imask, original, reg, buf;
- /* Falcon should be in loopback to isolate the XMAC from the PHY */
- WARN_ON(!LOOPBACK_INTERNAL(efx));
-
for (i = 0; i < n_regs; ++i) {
address = regs[i].address;
mask = imask = regs[i].mask;
--- a/drivers/net/ethernet/sfc/selftest.c
+++ b/drivers/net/ethernet/sfc/selftest.c
@@ -120,19 +120,6 @@ static int efx_test_nvram(struct efx_nic
return rc;
}
-static int efx_test_chip(struct efx_nic *efx, struct efx_self_tests *tests)
-{
- int rc = 0;
-
- /* Test register access */
- if (efx->type->test_registers) {
- rc = efx->type->test_registers(efx);
- tests->registers = rc ? -1 : 1;
- }
-
- return rc;
-}
-
/**************************************************************************
*
* Interrupt and event queue testing
@@ -699,8 +686,7 @@ int efx_selftest(struct efx_nic *efx, st
{
enum efx_loopback_mode loopback_mode = efx->loopback_mode;
int phy_mode = efx->phy_mode;
- enum reset_type reset_method = RESET_TYPE_INVISIBLE;
- int rc_test = 0, rc_reset = 0, rc;
+ int rc_test = 0, rc_reset, rc;
efx_selftest_async_cancel(efx);
@@ -737,44 +723,26 @@ int efx_selftest(struct efx_nic *efx, st
*/
efx_device_detach_sync(efx);
- mutex_lock(&efx->mac_lock);
- if (efx->loopback_modes) {
- /* We need the 312 clock from the PHY to test the XMAC
- * registers, so move into XGMII loopback if available */
- if (efx->loopback_modes & (1 << LOOPBACK_XGMII))
- efx->loopback_mode = LOOPBACK_XGMII;
- else
- efx->loopback_mode = __ffs(efx->loopback_modes);
- }
-
- __efx_reconfigure_port(efx);
- mutex_unlock(&efx->mac_lock);
-
- /* free up all consumers of SRAM (including all the queues) */
- efx_reset_down(efx, reset_method);
-
- rc = efx_test_chip(efx, tests);
- if (rc && !rc_test)
- rc_test = rc;
+ if (efx->type->test_chip) {
+ rc_reset = efx->type->test_chip(efx, tests);
+ if (rc_reset) {
+ netif_err(efx, hw, efx->net_dev,
+ "Unable to recover from chip test\n");
+ efx_schedule_reset(efx, RESET_TYPE_DISABLE);
+ return rc_reset;
+ }
- /* reset the chip to recover from the register test */
- rc_reset = efx->type->reset(efx, reset_method);
+ if ((tests->registers < 0) && !rc_test)
+ rc_test = -EIO;
+ }
/* Ensure that the phy is powered and out of loopback
* for the bist and loopback tests */
+ mutex_lock(&efx->mac_lock);
efx->phy_mode &= ~PHY_MODE_LOW_POWER;
efx->loopback_mode = LOOPBACK_NONE;
-
- rc = efx_reset_up(efx, reset_method, rc_reset == 0);
- if (rc && !rc_reset)
- rc_reset = rc;
-
- if (rc_reset) {
- netif_err(efx, drv, efx->net_dev,
- "Unable to recover from chip test\n");
- efx_schedule_reset(efx, RESET_TYPE_DISABLE);
- return rc_reset;
- }
+ __efx_reconfigure_port(efx);
+ mutex_unlock(&efx->mac_lock);
rc = efx_test_phy(efx, tests, flags);
if (rc && !rc_test)
--- a/drivers/net/ethernet/sfc/siena.c
+++ b/drivers/net/ethernet/sfc/siena.c
@@ -25,10 +25,12 @@
#include "workarounds.h"
#include "mcdi.h"
#include "mcdi_pcol.h"
+#include "selftest.h"
/* Hardware control for SFC9000 family including SFL9021 (aka Siena). */
static void siena_init_wol(struct efx_nic *efx);
+static int siena_reset_hw(struct efx_nic *efx, enum reset_type method);
static void siena_push_irq_moderation(struct efx_channel *channel)
@@ -166,10 +168,29 @@ static const struct efx_nic_register_tes
EFX_OWORD32(0xFFFFFFFF, 0xFFFFFFFF, 0x00000007, 0x00000000) },
};
-static int siena_test_registers(struct efx_nic *efx)
+static int siena_test_chip(struct efx_nic *efx, struct efx_self_tests *tests)
{
- return efx_nic_test_registers(efx, siena_register_tests,
- ARRAY_SIZE(siena_register_tests));
+ enum reset_type reset_method = reset_method;
+ int rc, rc2;
+
+ efx_reset_down(efx, reset_method);
+
+ /* Reset the chip immediately so that it is completely
+ * quiescent regardless of what any VF driver does.
+ */
+ rc = siena_reset_hw(efx, reset_method);
+ if (rc)
+ goto out;
+
+ tests->registers =
+ efx_nic_test_registers(efx, siena_register_tests,
+ ARRAY_SIZE(siena_register_tests))
+ ? -1 : 1;
+
+ rc = siena_reset_hw(efx, reset_method);
+out:
+ rc2 = efx_reset_up(efx, reset_method, rc == 0);
+ return rc ? rc : rc2;
}
/**************************************************************************
@@ -662,7 +683,7 @@ const struct efx_nic_type siena_a0_nic_t
.get_wol = siena_get_wol,
.set_wol = siena_set_wol,
.resume_wol = siena_init_wol,
- .test_registers = siena_test_registers,
+ .test_chip = siena_test_chip,
.test_nvram = efx_mcdi_nvram_test_all,
.revision = EFX_REV_SIENA_A0,
next prev parent reply other threads:[~2013-03-26 23:24 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 22:50 [ 00/72] 3.4.38-stable review Greg Kroah-Hartman
2013-03-26 22:50 ` [ 01/72] Revert "USB: EHCI: dont check DMA values in QH overlays" Greg Kroah-Hartman
2013-03-26 22:50 ` [ 02/72] sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option Greg Kroah-Hartman
2013-03-26 22:50 ` [ 03/72] net/ipv4: Ensure that location of timestamp option is stored Greg Kroah-Hartman
2013-03-26 22:50 ` [ 04/72] netconsole: dont call __netpoll_cleanup() while atomic Greg Kroah-Hartman
2013-03-26 22:50 ` [ 05/72] bonding: dont call update_speed_duplex() under spinlocks Greg Kroah-Hartman
2013-03-26 22:50 ` [ 06/72] tg3: 5715 does not link up when autoneg off Greg Kroah-Hartman
2013-03-26 22:50 ` [ 07/72] sctp: Use correct sideffect command in duplicate cookie handling Greg Kroah-Hartman
2013-03-26 22:50 ` [ 08/72] sctp: dont break the loop while meeting the active_path so as to find the matched transport Greg Kroah-Hartman
2013-03-26 22:50 ` [ 09/72] ipv4: fix definition of FIB_TABLE_HASHSZ Greg Kroah-Hartman
2013-03-26 22:50 ` [ 10/72] tcp: fix skb_availroom() Greg Kroah-Hartman
2013-03-26 22:50 ` [ 11/72] rtnetlink: Mask the rta_type when range checking Greg Kroah-Hartman
2013-03-26 22:50 ` [ 12/72] vhost/net: fix heads usage of ubuf_info Greg Kroah-Hartman
2013-03-26 22:50 ` [ 13/72] bnx2x: fix occasional statistics off-by-4GB error Greg Kroah-Hartman
2013-03-26 22:50 ` [ 14/72] inet: limit length of fragment queue hash table bucket lists Greg Kroah-Hartman
2013-03-26 22:50 ` [ 15/72] sfc: Do not attempt to flush queues if DMA is disabled Greg Kroah-Hartman
2013-03-26 22:50 ` [ 16/72] sfc: Convert firmware subtypes to native byte order in efx_mcdi_get_board_cfg() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 17/72] sfc: Add parentheses around use of bitfield macro arguments Greg Kroah-Hartman
2013-03-26 22:51 ` [ 18/72] sfc: Fix MCDI structure field lookup Greg Kroah-Hartman
2013-03-26 22:51 ` [ 19/72] sfc: Really disable flow control while flushing Greg Kroah-Hartman
2013-03-26 22:51 ` [ 20/72] sfc: Work-around flush timeout when flushes have completed Greg Kroah-Hartman
2013-03-26 22:51 ` [ 21/72] sfc: lock TX queues when calling netif_device_detach() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 22/72] sfc: Fix timekeeping in efx_mcdi_poll() Greg Kroah-Hartman
2013-03-26 22:51 ` Greg Kroah-Hartman [this message]
2013-03-26 22:51 ` [ 24/72] sfc: Avoid generating over-length MC_CMD_FLUSH_RX_QUEUES request Greg Kroah-Hartman
2013-03-26 22:51 ` [ 25/72] sfc: Correctly initialise reset_method in siena_test_chip() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 26/72] sfc: Properly sync RX DMA buffer when it is not the last in the page Greg Kroah-Hartman
2013-03-26 22:51 ` [ 27/72] sfc: Fix efx_rx_buf_offset() in the presence of swiotlb Greg Kroah-Hartman
2013-03-26 22:51 ` [ 28/72] sfc: Detach net device when stopping queues for reconfiguration Greg Kroah-Hartman
2013-03-26 22:51 ` [ 29/72] sfc: Disable soft interrupt handling during efx_device_detach_sync() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 30/72] sfc: Only use TX push if a single descriptor is to be written Greg Kroah-Hartman
2013-03-26 22:51 ` [ 31/72] ALSA: hda/cirrus - Fix the digital beep registration Greg Kroah-Hartman
2013-03-26 22:51 ` [ 32/72] ALSA: hda - Fix typo in checking IEC958 emphasis bit Greg Kroah-Hartman
2013-03-26 22:51 ` [ 33/72] ALSA: snd-usb: mixer: propagate errors up the call chain Greg Kroah-Hartman
2013-03-26 22:51 ` [ 34/72] ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 35/72] drm/i915: restrict kernel address leak in debugfs Greg Kroah-Hartman
2013-03-26 22:51 ` [ 36/72] tracing: Fix race in snapshot swapping Greg Kroah-Hartman
2013-03-26 22:51 ` [ 37/72] tracing: Fix free of probe entry by calling call_rcu_sched() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 38/72] rtlwifi: rtl8192cu: Fix schedule while atomic bug splat Greg Kroah-Hartman
2013-03-26 22:51 ` [ 39/72] rtlwifi: rtl8192cu: Fix problem that prevents reassociation Greg Kroah-Hartman
2013-03-26 22:51 ` [ 40/72] mwifiex: fix potential out-of-boundary access to ibss rate table Greg Kroah-Hartman
2013-03-26 22:51 ` [ 41/72] drm/i915: bounds check execbuffer relocation count Greg Kroah-Hartman
2013-03-26 22:51 ` [ 42/72] KMS: fix EDID detailed timing vsync parsing Greg Kroah-Hartman
2013-03-26 22:51 ` [ 43/72] KMS: fix EDID detailed timing frame rate Greg Kroah-Hartman
2013-03-26 22:51 ` [ 44/72] mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting Greg Kroah-Hartman
2013-03-26 22:51 ` [ 45/72] target/iscsi: Fix mutual CHAP auth on big-endian arches Greg Kroah-Hartman
2013-03-26 22:51 ` [ 46/72] drm/radeon: add Richland pci ids Greg Kroah-Hartman
2013-03-26 22:51 ` [ 47/72] drm/radeon: add support for Richland APUs Greg Kroah-Hartman
2013-03-26 22:51 ` [ 48/72] drm/radeon/benchmark: make sure bo blit copy exists before using it Greg Kroah-Hartman
2013-03-26 22:51 ` [ 49/72] cifs: ignore everything in SPNEGO blob after mechTypes Greg Kroah-Hartman
2013-03-26 22:51 ` [ 50/72] jbd2: fix use after free in jbd2_journal_dirty_metadata() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 51/72] ext4: fix the wrong number of the allocated blocks in ext4_split_extent() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 52/72] usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 player Greg Kroah-Hartman
2013-03-26 22:51 ` [ 53/72] ext4: fix data=journal fast mount/umount hang Greg Kroah-Hartman
2013-03-26 22:51 ` [ 54/72] IPoIB: Fix send lockup due to missed TX completion Greg Kroah-Hartman
2013-03-26 22:51 ` [ 55/72] clockevents: Dont allow dummy broadcast timers Greg Kroah-Hartman
2013-03-26 22:51 ` [ 56/72] x86-64: Fix the failure case in copy_user_handle_tail() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 57/72] USB: xhci - fix bit definitions for IMAN register Greg Kroah-Hartman
2013-03-26 22:51 ` [ 58/72] USB: xhci: correctly enable interrupts Greg Kroah-Hartman
2013-03-26 22:51 ` [ 59/72] USB: cdc-acm: fix device unregistration Greg Kroah-Hartman
2013-03-26 22:51 ` [ 60/72] USB: serial: fix interface refcounting Greg Kroah-Hartman
2013-03-26 22:51 ` [ 61/72] nohz: Make tick_nohz_irq_exit() irq safe Greg Kroah-Hartman
2013-03-26 22:51 ` [ 62/72] udf: Fix bitmap overflow on large filesystems with small block size Greg Kroah-Hartman
2013-03-26 22:51 ` [ 63/72] USB: garmin_gps: fix memory leak on disconnect Greg Kroah-Hartman
2013-03-26 22:51 ` [ 64/72] USB: io_ti: fix get_icount for two port adapters Greg Kroah-Hartman
2013-03-26 22:51 ` [ 65/72] key: Fix resource leak Greg Kroah-Hartman
2013-03-26 22:51 ` [ 66/72] isofs: avoid info leak on export Greg Kroah-Hartman
2013-03-26 22:51 ` [ 67/72] udf: " Greg Kroah-Hartman
2013-03-26 22:51 ` [ 68/72] tools: hv: Netlink source address validation allows DoS Greg Kroah-Hartman
2013-03-26 22:51 ` [ 69/72] i915: initialize CADL in opregion Greg Kroah-Hartman
2013-03-26 22:51 ` [ 70/72] exec: use -ELOOP for max recursion depth Greg Kroah-Hartman
2013-03-26 22:51 ` [ 71/72] rt2x00: error in configurations with mesh support disabled Greg Kroah-Hartman
2013-03-26 22:51 ` [ 72/72] asus-laptop: Do not call HWRS on init Greg Kroah-Hartman
2013-03-27 18:33 ` [ 00/72] 3.4.38-stable review Shuah Khan
2013-03-27 18:33 ` Shuah Khan
2013-03-28 14:17 ` Satoru Takeuchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130326224922.091511429@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=bhutchings@solarflare.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.