From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from exchange07.timesys.com (exchange07.timesys.com [209.114.137.116]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id 15B70E014BD for ; Thu, 28 Mar 2013 14:50:12 -0700 (PDT) Received: from duckworth (192.168.3.31) by exchange07.timesys.com (192.168.1.221) with Microsoft SMTP Server id 8.1.436.0; Thu, 28 Mar 2013 17:50:11 -0400 Date: Thu, 28 Mar 2013 17:50:12 -0400 From: Ian Wisbon To: "Maupin, Chase" Message-ID: <20130328175012.7f9533b3@duckworth> In-Reply-To: <7D46E86EC0A8354091174257B2FED101594ADCAC@DLEE11.ent.ti.com> References: <20130328115247.029b68ae@duckworth> <7D46E86EC0A8354091174257B2FED101594ACEFA@DLEE11.ent.ti.com> <20130328122753.2b957cca@duckworth> <7D46E86EC0A8354091174257B2FED101594AD1C3@DLEE11.ent.ti.com> <20130328173448.1e541526@duckworth> <7D46E86EC0A8354091174257B2FED101594ADCAC@DLEE11.ent.ti.com> Organization: Timesys Coporation X-Mailer: Claws Mail 3.8.0 (GTK+ 2.24.10; x86_64-pc-linux-gnu) MIME-Version: 1.0 Cc: "meta-ti@yoctoproject.org" Subject: Re: OMAP5: Booting build output X-BeenThere: meta-ti@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Usage and development list for the meta-ti layer List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 28 Mar 2013 21:50:12 -0000 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Chase, I've got a 4-port USB serial adapter connected to my host, so, it enumerates as ttyUSB5 on my host. I'm connecting to the micro-USB port labeled DEBUG USB, and the LED indicating debug power is lit, screen /dev/ttyUSB5 115200 Applying power, LEDs D1 and D2 light blue, but otherwise, nothing lights; I don't see a link come up either on the eth port. On Thu, 28 Mar 2013 17:42:26 -0400 "Maupin, Chase" wrote: > > -----Original Message----- > > From: Ian Wisbon [mailto:ian.wisbon@timesys.com] > > Sent: Thursday, March 28, 2013 4:35 PM > > To: Maupin, Chase > > Cc: meta-ti@yoctoproject.org > > Subject: Re: [meta-ti] OMAP5: Booting build output > > > > Chase, > > > > Thanks - I have mine set to the same: > > > > off-on-off-on > > > > and still no luck booting. I also tried the reverse just in case > > I was > > backwards/upside-down; despite the same SD card booting an OMAP4 > > Panda, > > and replacing with OMAP5 MLO and u-boot.img, I see nothing on the > > console whatsoever. Not even a junk character implying an > > incorrect > > baudrate, etc. The USBBOOT functionality seems to work, so I > > don't > > believe the board to be non-functional. > > Are you connected to ttyUSB0 or ttyUSB1? For my board the serial is > ttyUSB0. > > > > > I'll sit tight for a while and see what else is committed. Thanks > > for > > your assistance! > > > > > > > > > > > > Does the SYSBOOT switch dictate whether the SD is used for > > > > booting? If > > > > so, what is the correct setting? I've previously attempted to > > > > boot > > > > using an SD card formatted as necessary for the OMAP4 Panda, > > but > > > > have > > > > been unsuccessful - I assumed a similar FAT format would be > > > > required > > > > for MLO/u-boot.img > > > > > > My sysboot switch is off on off on and I'm booting from SD. > > > > > > You can use the same SD format at omap4. Just replace the > > kerel and > > > bootloader, add the boot.scr and dtb file. Thanks, -- --- Ian Wisbon Support Manager Timesys Corporation