From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from arroyo.ext.ti.com (arroyo.ext.ti.com [192.94.94.40]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id 9A8CEE014C1 for ; Thu, 28 Mar 2013 15:11:09 -0700 (PDT) Received: from dlelxv30.itg.ti.com ([172.17.2.17]) by arroyo.ext.ti.com (8.13.7/8.13.7) with ESMTP id r2SMB44j019105; Thu, 28 Mar 2013 17:11:05 -0500 Received: from DFLE73.ent.ti.com (dfle73.ent.ti.com [128.247.5.110]) by dlelxv30.itg.ti.com (8.13.8/8.13.8) with ESMTP id r2SMB41O016999; Thu, 28 Mar 2013 17:11:04 -0500 Received: from dlelxv22.itg.ti.com (172.17.1.197) by DFLE73.ent.ti.com (128.247.5.110) with Microsoft SMTP Server id 14.2.342.3; Thu, 28 Mar 2013 17:11:04 -0500 Received: from localhost ([158.218.102.158]) by dlelxv22.itg.ti.com (8.13.8/8.13.8) with ESMTP id r2SMB4HW011776; Thu, 28 Mar 2013 17:11:04 -0500 Date: Thu, 28 Mar 2013 18:11:04 -0400 From: Denys Dmytriyenko To: "Maupin, Chase" Message-ID: <20130328221103.GH23022@edge> References: <20130328115247.029b68ae@duckworth> <7D46E86EC0A8354091174257B2FED101594ACEFA@DLEE11.ent.ti.com> <20130328122753.2b957cca@duckworth> <7D46E86EC0A8354091174257B2FED101594AD1C3@DLEE11.ent.ti.com> <20130328173448.1e541526@duckworth> <7D46E86EC0A8354091174257B2FED101594ADCAC@DLEE11.ent.ti.com> <20130328175012.7f9533b3@duckworth> <7D46E86EC0A8354091174257B2FED101594ADDAE@DLEE11.ent.ti.com> MIME-Version: 1.0 In-Reply-To: <7D46E86EC0A8354091174257B2FED101594ADDAE@DLEE11.ent.ti.com> User-Agent: Mutt/1.5.20 (2009-06-14) Cc: "meta-ti@yoctoproject.org" Subject: Re: OMAP5: Booting build output X-BeenThere: meta-ti@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Usage and development list for the meta-ti layer List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 28 Mar 2013 22:11:09 -0000 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline On Thu, Mar 28, 2013 at 09:56:12PM +0000, Maupin, Chase wrote: > > > -----Original Message----- > > From: Ian Wisbon [mailto:ian.wisbon@timesys.com] > > Sent: Thursday, March 28, 2013 4:50 PM > > To: Maupin, Chase > > Cc: meta-ti@yoctoproject.org > > Subject: Re: [meta-ti] OMAP5: Booting build output > > > > Chase, > > > > I've got a 4-port USB serial adapter connected to my host, so, it > > enumerates as ttyUSB5 on my host. > > > > I'm connecting to the micro-USB port labeled DEBUG USB, and the > > LED > > indicating debug power is lit, screen /dev/ttyUSB5 115200 > > In the dmesg output you should see two ttyUSB devices enumerated when the > FTDI is detected. The first is the serial console. I'm not sure about your > setup but if you have a 4 port serial adapter I would expect those are > ttyUSB0 - ttyUSB3. This would make the FTDI ttyUSB4. > > The first thing we need is that you can see the serial console. In some > ways I wish this was like the beaglebone where you would see CCCCC when no > SD card is loaded to know your serial connection was working :( > > > Applying power, LEDs D1 and D2 light blue, but otherwise, nothing > > lights; I don't see a link come up either on the eth port. > > Ethernet won't work until later kernels. I haven't tried the one Denys just > updated to yet but ethernet is supposed to work there. But with that we are hearing reports the DSS is broken... :( -- Denys > > On Thu, 28 Mar 2013 17:42:26 -0400 > > "Maupin, Chase" wrote: > > > > > > -----Original Message----- > > > > From: Ian Wisbon [mailto:ian.wisbon@timesys.com] > > > > Sent: Thursday, March 28, 2013 4:35 PM > > > > To: Maupin, Chase > > > > Cc: meta-ti@yoctoproject.org > > > > Subject: Re: [meta-ti] OMAP5: Booting build output > > > > > > > > Chase, > > > > > > > > Thanks - I have mine set to the same: > > > > > > > > off-on-off-on > > > > > > > > and still no luck booting. I also tried the reverse just in > > case > > > > I was > > > > backwards/upside-down; despite the same SD card booting an > > OMAP4 > > > > Panda, > > > > and replacing with OMAP5 MLO and u-boot.img, I see nothing on > > the > > > > console whatsoever. Not even a junk character implying an > > > > incorrect > > > > baudrate, etc. The USBBOOT functionality seems to work, so I > > > > don't > > > > believe the board to be non-functional. > > > > > > Are you connected to ttyUSB0 or ttyUSB1? For my board the > > serial is > > > ttyUSB0. > > > > > > > > > > > I'll sit tight for a while and see what else is committed. > > Thanks > > > > for > > > > your assistance! > > > > > > > > > > > > > > > > > > > > Does the SYSBOOT switch dictate whether the SD is used > > for > > > > > > booting? If > > > > > > so, what is the correct setting? I've previously > > attempted to > > > > > > boot > > > > > > using an SD card formatted as necessary for the OMAP4 > > Panda, > > > > but > > > > > > have > > > > > > been unsuccessful - I assumed a similar FAT format would > > be > > > > > > required > > > > > > for MLO/u-boot.img > > > > > > > > > > My sysboot switch is off on off on and I'm booting from SD. > > > > > > > > > > You can use the same SD format at omap4. Just replace the > > > > kerel and > > > > > bootloader, add the boot.scr and dtb file. > > > > Thanks, > > > > > > -- > > --- > > Ian Wisbon > > Support Manager > > Timesys Corporation > _______________________________________________ > meta-ti mailing list > meta-ti@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-ti