From: Denys Dmytriyenko <denys@ti.com>
To: "Reizer, Eyal" <eyalr@ti.com>,
"meta-arago@arago-project.org" <meta-arago@arago-project.org>
Subject: Re: [PATCHv3 2/9] wl18xx-firmware: install Wilink8 wlan firmware files
Date: Wed, 10 Apr 2013 17:32:26 -0400 [thread overview]
Message-ID: <20130410213226.GC3078@edge> (raw)
In-Reply-To: <20130405231433.GG31233@denix.org>
On Fri, Apr 05, 2013 at 07:14:33PM -0400, Denys Dmytriyenko wrote:
> On Sun, Mar 31, 2013 at 04:13:26PM -0400, Denys Dmytriyenko wrote:
> > On Wed, Mar 27, 2013 at 07:53:24AM +0000, Reizer, Eyal wrote:
> > > Hi,
> > >
> > >
> > > > -----Original Message-----
> > > > From: Dmytriyenko, Denys
> > > > Sent: Tuesday, March 26, 2013 8:45 PM
> > > > To: Reizer, Eyal
> > > > Cc: meta-arago@arago-project.org
> > > > Subject: Re: [meta-arago] [PATCHv3 2/9] wl18xx-firmware: install
> > > > Wilink8 wlan firmware files
> > > >
> > > > On Wed, Mar 20, 2013 at 11:30:09AM +0200, Eyal Reizer wrote:
> > > > > Add a recipe for installing the Wilink8 wlan firmware files into the
> > > > > target file system.
> > > > >
> > > > > This package replace the wilink6 package which is provided by the
> > > > > wl12xx-firmware recipe. Selection between the two is done using a
> > > > > "WILINK_VERSION" switch added to arago.conf
> > > >
> > > > I have 2 questions:
> > > >
> > > > 1. I seem to be missing the first patch in this series - 1/9 never made
> > >
> > > I do see patch 1/9 in the following link:
> > > http://arago-project.org/pipermail/meta-arago/2013-March/001004.html
> >
> > Ah, I see it was part of v1 submission, but not the following v2 or v3 sets...
>
> Eyal,
>
> Ping on this one. There was a v1 of the 1/9 patch, but not v2 or v3. Are you
> saying you want the v1 to be pushed? Do you want to address Franklin's
> comment here:
> http://arago-project.org/pipermail/meta-arago/2013-March/001013.html
Eyal,
Ping again - any updates?
--
Denys
> > > > it 2. Is this set depending on Franklin's big set of 17 patches?
> > >
> > > >
> > > > > Changes in v2:
> > > > > * Use an actual release name in the recipe name instead of _git
> > > > > * Add RPROVIDES, RREPLACES, RCONFLICTS as this recipe completely
> > > > > replace the wilink6 one.
> > > > >
> > > > > Changes in v3:
> > > > > * Add _${PN} to all runtime variables
> > > > >
> > > > > Signed-off-by: Eyal Reizer <eyalr@ti.com>
> > > > > ---
> > > > > .../wl18xx-firmware/wl18xx-firmware/Makefile | 7 +++++
> > > > > .../wl18xx-firmware/wl18xx-firmware_r8.a6.01.bb | 30
> > > > ++++++++++++++++++++
> > > > > 2 files changed, 37 insertions(+)
> > > > > create mode 100644
> > > > > meta-arago-extras/recipes-bsp/wl18xx-firmware/wl18xx-
> > > > firmware/Makefile
> > > > > create mode 100644
> > > > > meta-arago-extras/recipes-bsp/wl18xx-firmware/wl18xx-
> > > > firmware_r8.a6.01
> > > > > .bb
> > > > >
> > > > > diff --git
> > > > > a/meta-arago-extras/recipes-bsp/wl18xx-firmware/wl18xx-
> > > > firmware/Makefi
> > > > > le
> > > > > b/meta-arago-extras/recipes-bsp/wl18xx-firmware/wl18xx-
> > > > firmware/Makefi
> > > > > le
> > > > > new file mode 100644
> > > > > index 0000000..0bb7ab8
> > > > > --- /dev/null
> > > > > +++ b/meta-arago-extras/recipes-bsp/wl18xx-firmware/wl18xx-
> > > > firmware/Ma
> > > > > +++ kefile
> > > > > @@ -0,0 +1,7 @@
> > > > > +# Installs the the ti-connectiviy wlan firmware files into the root
> > > > > +file system
> > > > > +
> > > > > +install:
> > > > > + install -d $(DEST_DIR)/lib/firmware/ti-connectivity
> > > > > + cp -RpP * $(DEST_DIR)/lib/firmware/ti-connectivity/
> > > > > + rm -f $(DEST_DIR)/lib/firmware/ti-connectivity/Makefile
> > > > > +
> > > > > diff --git
> > > > > a/meta-arago-extras/recipes-bsp/wl18xx-firmware/wl18xx-
> > > > firmware_r8.a6.
> > > > > 01.bb
> > > > > b/meta-arago-extras/recipes-bsp/wl18xx-firmware/wl18xx-
> > > > firmware_r8.a6.
> > > > > 01.bb
> > > > > new file mode 100644
> > > > > index 0000000..fd463cc
> > > > > --- /dev/null
> > > > > +++ b/meta-arago-extras/recipes-bsp/wl18xx-firmware/wl18xx-
> > > > firmware_r8
> > > > > +++ .a6.01.bb
> > > > > @@ -0,0 +1,30 @@
> > > > > +DESCRIPTION = "Firmware files for use with TI wl18xx"
> > > > > +LICENSE = "TI-TSPA"
> > > > > +LIC_FILES_CHKSUM =
> > > > "file://LICENCE;md5=b28122fd6678e89fd3a8d4bc80922969"
> > > > > +
> > > > > +PACKAGE_ARCH = "all"
> > > > > +
> > > > > +PR = "r1+gitr${SRCREV}"
> > > > > +
> > > > > +PROVIDES += "wl12xx-firmware"
> > > > > +RPROVIDES_${PN} += "wl12xx-firmware"
> > > > > +RREPLACES_${PN} += "wl12xx-firmware"
> > > > > +RCONFLICTS_${PN} += "wl12xx-firmware"
> > > > > +
> > > > > +SRCREV = "ol_r8.a6.01"
> > > > > +SRC_URI = "git://github.com/TI-OpenLink/wl18xx_fw.git;protocol=git \
> > > > > + file://Makefile \
> > > > > + "
> > > > > +
> > > > > +S = "${WORKDIR}/git"
> > > > > +
> > > > > +do_compile() {
> > > > > + :
> > > > > +}
> > > > > +
> > > > > +do_install() {
> > > > > + cp ${WORKDIR}/Makefile ${S}
> > > > > + oe_runmake 'DEST_DIR=${D}' install }
> > > > > +
> > > > > +FILES_${PN} = "/lib/firmware/ti-connectivity/*"
> > > > > --
> > > > > 1.7.9.5
> > > > >
> > > > > _______________________________________________
> > > > > meta-arago mailing list
> > > > > meta-arago@arago-project.org
> > > > > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
> > > > >
> > > _______________________________________________
> > > meta-arago mailing list
> > > meta-arago@arago-project.org
> > > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
> > >
> > _______________________________________________
> > meta-arago mailing list
> > meta-arago@arago-project.org
> > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
> >
> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
prev parent reply other threads:[~2013-04-10 21:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-20 9:30 [PATCHv3 2/9] wl18xx-firmware: install Wilink8 wlan firmware files Eyal Reizer
2013-03-20 9:30 ` [PATCHv3 3/9] hostap-daemon-wl18xx: hostap-daemon for ti wilink8 release Eyal Reizer
2013-03-20 9:30 ` [PATCHv3 4/9] wpa-supplicant-wl18xx: build ti 2.0-devel version for wilink8 Eyal Reizer
2013-03-20 13:52 ` Maupin, Chase
2013-03-20 13:56 ` Reizer, Eyal
2013-03-20 9:30 ` [PATCHv3 5/9] ti-wifi-utils-wl18xx: build the calibrator tool for wilin8 Eyal Reizer
2013-03-20 9:30 ` [PATCHv3 6/9] ti-compat-wireless-wl18xx: build Wilink8 drivers from TI-OpenLink Eyal Reizer
2013-03-26 18:45 ` [PATCHv3 2/9] wl18xx-firmware: install Wilink8 wlan firmware files Denys Dmytriyenko
2013-03-26 20:26 ` Reizer, Eyal
2013-03-27 7:53 ` Reizer, Eyal
2013-03-31 20:13 ` Denys Dmytriyenko
2013-04-05 23:14 ` Denys Dmytriyenko
2013-04-10 21:32 ` Denys Dmytriyenko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130410213226.GC3078@edge \
--to=denys@ti.com \
--cc=eyalr@ti.com \
--cc=meta-arago@arago-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.