[PATCHv2 08/10] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface

[andrew@lunn.ch (Andrew Lunn)]

On Thu, Apr 11, 2013 at 12:20:34AM +0200, Thomas Petazzoni wrote:
> Now that the PCIe mvebu driver is usable on Kirkwood, use it instead
> of the legacy PCIe code, since it allows to describe the PCIe
> interfaces in the Device Tree.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
>  arch/arm/boot/dts/kirkwood-ts219.dtsi |    7 +++++++
>  arch/arm/mach-kirkwood/board-ts219.c  |   10 ----------
>  2 files changed, 7 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
> index 64ea27c..341e1d8 100644
> --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
> +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
> @@ -74,5 +74,12 @@
>  			status = "okay";
>  			nr-ports = <2>;
>  		};
> +		pcie-controller {
> +			status = "okay";
> +
> +			pcie at 1,0 {
> +				status = "okay";
> +			};
> +		};
>  	};
>  };

Hi Thomas

There is some DT weirdness going on here. With that you have above,
the .dtb file has both status="disabled" when i convert it back to dts
format.

In order to get it to work, i had to move this fragment into the
kirkwood-ts219-628[12].dtsi files.

Can some dtc guru comment if this is supposed to work with the
arrangement of includes we have?

    Thanks
	Andrew