Re: recommended method of netbooting kernel/dtb in u-boot?

["Ira W. Snyder" <iws@ovro.caltech.edu>]

On Thu, Apr 11, 2013 at 12:39:00PM -0600, Chris Friesen wrote:
> On 04/11/2013 12:12 PM, Kumar Gala wrote:
> >
> > On Apr 11, 2013, at 10:44 AM, Chris Friesen wrote:
> >
> >>
> >> Hi all,
> >>
> >> We've got a powerpc system that uses u-boot.  In our environment on
> >> bootup u-boot does a DHCP to get networking info, then uses TFTP to
> >> get the kernel, which then does DHCP again and NFS-mounts the
> >> initial root filesystem.
> >>
> >> What's the standard practice for this sort of thing when using
> >> device tree blobs?  Do most people use multi-file images or do they
> >> TFTP scripts to load and execute separate kernel/dtb files?
> >
> > We've normally just done multiple tftp fetches and one grabs dtb and
> > one grabs kernel.
> 
> Do you hardcode the path to the file in the firmware?  Or do you upload 
> a script that knows the path to the file?
> 
> In our case the path to the boot file(s) depends on which slot the card 
> being booted has been inserted in.  The DHCP server knows what the path 
> is, so it can set dhcpd.conf appropriately, but we need to get that 
> information to the firmware on the card being booted.
> 

Hello Chris,

I use a hardware setup which sounds similar to yours. The DHCP server
controls which file is sent to each card.

I use the FIT image format to combine a kernel, dtb, and initrd in one
package. Then the U-Boot command "dhcp $address" sets up the network and
tftp's the filename sent by the DHCP server. You don't need to invoke
the U-Boot command "tftp" if you only have one image. "dhcp" is enough.

I used the U-Boot doc/uImage.FIT/*.its examples to get started, and
wrote my own custom .its file for my board. I don't use anything other
than the vmlinux.bin.gz provided by the kernel build.

Hope it helps,
Ira