From: Gleb Natapov <gleb@redhat.com>
To: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Ulrich Obergfell <uobergfe@redhat.com>
Subject: Re: KVM: x86: fix maintenance of guest/host xcr0 state
Date: Wed, 17 Apr 2013 16:16:23 +0300 [thread overview]
Message-ID: <20130417131623.GE1682@redhat.com> (raw)
In-Reply-To: <20130416023013.GA3943@amt.cnet>
On Mon, Apr 15, 2013 at 11:30:13PM -0300, Marcelo Tosatti wrote:
>
> ** Untested **.
>
> Emulation of xcr0 writes zero guest_xcr0_loaded variable so that
> subsequent VM-entry reloads CPU's xcr0 with guests xcr0 value.
>
> However, this is incorrect because guest_xcr0_loaded variable is
> read to decide whether to reload hosts xcr0.
>
> In case the vcpu thread is scheduled out after the guest_xcr0_loaded = 0
> assignment, and scheduler decides to preload FPU:
>
> switch_to
> {
> __switch_to
> __math_state_restore
> restore_fpu_checking
> fpu_restore_checking
> if (use_xsave())
> fpu_xrstor_checking
> xrstor64 with CPU's xcr0 == guests xcr0
>
> Fix by properly restoring hosts xcr0 during emulation of xcr0 writes.
>
> Analyzed-by: Ulrich Obergfell <uobergfe@redhat.com>
> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 999d124..222926a 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -555,6 +555,25 @@ void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw)
> }
> EXPORT_SYMBOL_GPL(kvm_lmsw);
>
> +static void kvm_load_guest_xcr0(struct kvm_vcpu *vcpu)
> +{
> + if (kvm_read_cr4_bits(vcpu, X86_CR4_OSXSAVE) &&
> + !vcpu->guest_xcr0_loaded) {
> + /* kvm_set_xcr() also depends on this */
> + xsetbv(XCR_XFEATURE_ENABLED_MASK, vcpu->arch.xcr0);
> + vcpu->guest_xcr0_loaded = 1;
> + }
> +}
> +
> +static void kvm_put_guest_xcr0(struct kvm_vcpu *vcpu)
> +{
> + if (vcpu->guest_xcr0_loaded) {
> + if (vcpu->arch.xcr0 != host_xcr0)
> + xsetbv(XCR_XFEATURE_ENABLED_MASK, host_xcr0);
> + vcpu->guest_xcr0_loaded = 0;
> + }
> +}
> +
> int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
> {
> u64 xcr0;
> @@ -571,8 +590,8 @@ int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
> return 1;
> if (xcr0 & ~host_xcr0)
> return 1;
> + kvm_put_guest_xcr0(vcpu);
> vcpu->arch.xcr0 = xcr0;
> - vcpu->guest_xcr0_loaded = 0;
> return 0;
> }
>
> @@ -5600,25 +5619,6 @@ static void inject_pending_event(struct kvm_vcpu *vcpu)
> }
> }
>
> -static void kvm_load_guest_xcr0(struct kvm_vcpu *vcpu)
> -{
> - if (kvm_read_cr4_bits(vcpu, X86_CR4_OSXSAVE) &&
> - !vcpu->guest_xcr0_loaded) {
> - /* kvm_set_xcr() also depends on this */
> - xsetbv(XCR_XFEATURE_ENABLED_MASK, vcpu->arch.xcr0);
> - vcpu->guest_xcr0_loaded = 1;
> - }
> -}
> -
> -static void kvm_put_guest_xcr0(struct kvm_vcpu *vcpu)
> -{
> - if (vcpu->guest_xcr0_loaded) {
> - if (vcpu->arch.xcr0 != host_xcr0)
> - xsetbv(XCR_XFEATURE_ENABLED_MASK, host_xcr0);
> - vcpu->guest_xcr0_loaded = 0;
> - }
> -}
> -
> static void process_nmi(struct kvm_vcpu *vcpu)
> {
> unsigned limit = 2;
--
Gleb.
next prev parent reply other threads:[~2013-04-17 13:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-16 2:30 KVM: x86: fix maintenance of guest/host xcr0 state Marcelo Tosatti
2013-04-16 7:22 ` Paolo Bonzini
2013-04-17 13:16 ` Gleb Natapov [this message]
2013-05-08 10:16 ` Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130417131623.GE1682@redhat.com \
--to=gleb@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=uobergfe@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.