All of lore.kernel.org
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org, linux-edac@vger.kernel.org
Subject: Re: [PATCH V4] edac: Handle EDAC ECC errors for Family 16h
Date: Wed, 17 Apr 2013 23:20:22 +0200	[thread overview]
Message-ID: <20130417212022.GA9181@pd.tnic> (raw)
In-Reply-To: <1366228633-3159-1-git-send-email-Aravind.Gopalakrishnan@amd.com>

[ trim CC-list ]

On Wed, Apr 17, 2013 at 02:57:13PM -0500, Aravind Gopalakrishnan wrote:
> Add code to handle ECC decoding for fam16h. Support exists for
> previous families already, so code has been reused werever applicable
> and some code has been added to handle fam16h specific operations.
> 
> The patch was tested on Fam16h with ECC turned on
> using the mce_amd_inj facility and works fine.
> 
> update: corrections to code from previous versions involve few cosmetic
> changes, reusing f10_read_dct_pci_cfg and basing off tip/master
> 
> Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>

Ok,

looks almost good, just a couple of cleanups. I also replaced the
lenghty comments with a reference to the BKDG. Please test the below
version and let me know,

Thanks.

--
From: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Date: Wed, 17 Apr 2013 14:57:13 -0500
Subject: [PATCH] amd64_edac: Add Family 16h support

Add code to handle DRAM ECC errors decoding for Fam16h.

Tested on Fam16h with ECC turned on using the mce_amd_inj facility and
works fine.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Boris: cleanups and clarifications ]
Signed-off-by: Borislav Petkov <bp@suse.de>
---
 arch/x86/kernel/amd_nb.c  |  3 ++-
 drivers/edac/amd64_edac.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/edac/amd64_edac.h |  4 ++-
 include/linux/pci_ids.h   |  2 ++
 4 files changed, 71 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 3684129be947..3048ded1b598 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -20,12 +20,14 @@ const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
 	{}
 };
 EXPORT_SYMBOL(amd_nb_misc_ids);
 
 static const struct pci_device_id amd_nb_link_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
 	{}
 };
 
@@ -81,7 +83,6 @@ int amd_cache_northbridges(void)
 			next_northbridge(link, amd_nb_link_ids);
         }
 
-	/* some CPU families (e.g. family 0x11) do not support GART */
 	if (boot_cpu_data.x86 == 0xf || boot_cpu_data.x86 == 0x10 ||
 	    boot_cpu_data.x86 == 0x15)
 		amd_northbridges.flags |= AMD_NB_GART;
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index e1d13c463c90..8b6a0343c220 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -98,6 +98,7 @@ int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
  *
  * F15h: we select which DCT we access using F1x10C[DctCfgSel]
  *
+ * F16h: has only 1 DCT
  */
 static int k8_read_dct_pci_cfg(struct amd64_pvt *pvt, int addr, u32 *val,
 			       const char *func)
@@ -340,6 +341,27 @@ static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct,
 		base_bits	= GENMASK(21, 31) | GENMASK(9, 15);
 		mask_bits	= GENMASK(21, 29) | GENMASK(9, 15);
 		addr_shift	= 4;
+
+	/*
+	* F16h needs two addr_shift values: 8 for high and 6 for low
+	* (cf. F16h BKDG).
+	*/
+	} else if (boot_cpu_data.x86 == 0x16) {
+		csbase          = pvt->csels[dct].csbases[csrow];
+		csmask          = pvt->csels[dct].csmasks[csrow >> 1];
+
+		*base  = (csbase & GENMASK(5,  15)) << 6;
+		*base |= (csbase & GENMASK(19, 30)) << 8;
+
+		*mask = ~0ULL;
+		/* poke holes for the csmask */
+		*mask &= ~((GENMASK(5, 15)  << 6) |
+			   (GENMASK(19, 30) << 8));
+
+		*mask |= (csmask & GENMASK(5, 15))  << 6;
+		*mask |= (csmask & GENMASK(19, 30)) << 8;
+
+		return;
 	} else {
 		csbase		= pvt->csels[dct].csbases[csrow];
 		csmask		= pvt->csels[dct].csmasks[csrow >> 1];
@@ -1150,6 +1172,21 @@ static int f15_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
 	return ddr3_cs_size(cs_mode, false);
 }
 
+/*
+ * F16h has only limited cs_modes
+ */
+static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+				unsigned cs_mode)
+{
+	WARN_ON(cs_mode > 12);
+
+	if (cs_mode == 6 || cs_mode == 8 ||
+	    cs_mode == 9 || cs_mode == 12)
+		return -1;
+	else
+		return ddr3_cs_size(cs_mode, false);
+}
+
 static void read_dram_ctl_register(struct amd64_pvt *pvt)
 {
 
@@ -1587,6 +1624,17 @@ static struct amd64_family_type amd64_family_types[] = {
 			.read_dct_pci_cfg	= f15_read_dct_pci_cfg,
 		}
 	},
+	[F16_CPUS] = {
+		.ctl_name = "F16h",
+		.f1_id = PCI_DEVICE_ID_AMD_16H_NB_F1,
+		.f3_id = PCI_DEVICE_ID_AMD_16H_NB_F3,
+		.ops = {
+			.early_channel_count	= f1x_early_channel_count,
+			.map_sysaddr_to_csrow	= f1x_map_sysaddr_to_csrow,
+			.dbam_to_cs		= f16_dbam_to_chip_select,
+			.read_dct_pci_cfg	= f10_read_dct_pci_cfg,
+		}
+	},
 };
 
 /*
@@ -1939,7 +1987,9 @@ static void read_mc_regs(struct amd64_pvt *pvt)
 
 	if (c->x86 >= 0x10) {
 		amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp);
-		amd64_read_dct_pci_cfg(pvt, DBAM1, &pvt->dbam1);
+		if (c->x86 != 0x16)
+			/* F16h has only DCT0 */
+			amd64_read_dct_pci_cfg(pvt, DBAM1, &pvt->dbam1);
 
 		/* F10h, revD and later can do x8 ECC too */
 		if ((c->x86 > 0x10 || c->x86_model > 7) && tmp & BIT(25))
@@ -2356,6 +2406,11 @@ static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt)
 		pvt->ops		= &amd64_family_types[F15_CPUS].ops;
 		break;
 
+	case 0x16:
+		fam_type		= &amd64_family_types[F16_CPUS];
+		pvt->ops		= &amd64_family_types[F16_CPUS].ops;
+		break;
+
 	default:
 		amd64_err("Unsupported family!\n");
 		return NULL;
@@ -2581,6 +2636,14 @@ static DEFINE_PCI_DEVICE_TABLE(amd64_pci_table) = {
 		.class		= 0,
 		.class_mask	= 0,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_AMD,
+		.device		= PCI_DEVICE_ID_AMD_16H_NB_F2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.class		= 0,
+		.class_mask	= 0,
+	},
 
 	{0, }
 };
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 35637d83f235..2c6f113bae2b 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -172,7 +172,8 @@
  */
 #define PCI_DEVICE_ID_AMD_15H_NB_F1	0x1601
 #define PCI_DEVICE_ID_AMD_15H_NB_F2	0x1602
-
+#define PCI_DEVICE_ID_AMD_16H_NB_F1	0x1531
+#define PCI_DEVICE_ID_AMD_16H_NB_F2	0x1532
 
 /*
  * Function 1 - Address Map
@@ -296,6 +297,7 @@ enum amd_families {
 	K8_CPUS = 0,
 	F10_CPUS,
 	F15_CPUS,
+	F16_CPUS,
 	NUM_FAMILIES,
 };
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index f11c1c2609d5..9b3b85822302 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -524,6 +524,8 @@
 #define PCI_DEVICE_ID_AMD_15H_NB_F3	0x1603
 #define PCI_DEVICE_ID_AMD_15H_NB_F4	0x1604
 #define PCI_DEVICE_ID_AMD_15H_NB_F5	0x1605
+#define PCI_DEVICE_ID_AMD_16H_NB_F3	0x1533
+#define PCI_DEVICE_ID_AMD_16H_NB_F4	0x1534
 #define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
 #define PCI_DEVICE_ID_AMD_LANCE		0x2000
 #define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
-- 
1.8.2.135.g7b592fa

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--

  reply	other threads:[~2013-04-17 21:20 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-17 19:57 [PATCH V4] edac: Handle EDAC ECC errors for Family 16h Aravind Gopalakrishnan
2013-04-17 21:20 ` Borislav Petkov [this message]
2013-04-18  0:44   ` Aravind
2013-04-18  9:08     ` Borislav Petkov
2013-04-19  7:26       ` Ingo Molnar
2013-04-19 10:09         ` [PATCH] amd64_edac: Add Family 16h support Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130417212022.GA9181@pd.tnic \
    --to=bp@alien8.de \
    --cc=Aravind.Gopalakrishnan@amd.com \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.