* [PATCH v4 01/10] ASoC: phycore-ac97: Add DT support
2013-04-18 12:33 ` Markus Pargmann
@ 2013-04-18 12:33 ` Markus Pargmann
-1 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Fabio Estevam, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
Lars-Peter Clausen, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
Mark Brown, Timur Tabi, Liam Girdwood, Sascha Hauer
Add devicetree support for this audio soc fabric driver.
DT initialized drivers do not have real device ids, so
imx-pcm-fiq-audio.0 is used without '.0'.
This patch also simplifies the way audmux ports are configured. Before
there was knowledge about the used board. As the audmux driver knows the
used board, we know use the returned errorcodes to correctly set the
audmux port. So this driver does not have to know which board it is
running on.
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
Notes:
Changes in v4:
- New property phytec,audmux to check which audmux setup should be
executed. Checking for fsl,imx21-audmux and fsl,imx31-audmux.
Changes in v3:
- Add some more information in the commit message.
Changes in v2:
- Simplify the driver, by combining audmux port configurations. The
audmux driver actually knows on which platform he is running and
will return the appropriate error code if we use functions for
another platform. So we don't need to have the knowledge about it
in phycore-ac97 and can try both functions. This removes the need
of different compatibilities and renames it to phycore-ac97.
- Use a phandle for the cpu_dai link.
- Add devicetree binding documentation.
- Rename binding to phytec,phycore-ac97 and fsl,ssi to phytec,ssi
Changes in v2:
- Simplify the driver, by combining audmux port configurations. The
audmux driver actually knows on which platform he is running and
will return the appropriate error code if we use functions for
another platform. So we don't need to have the knowledge about it
in phycore-ac97 and can try both functions. This removes the need
of different compatibilities and renames it to imx27-ac97.
- Use a phandle for the cpu_dai link.
- Add devicetree binding documentation.
- Rename binding to phytec,phycore-ac97 and fsl,ssi to phytec,ssi
.../bindings/sound/phytec,phycore-ac97.txt | 14 ++
sound/soc/fsl/phycore-ac97.c | 166 ++++++++++++++++++---
2 files changed, 158 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt
diff --git a/Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt b/Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt
new file mode 100644
index 0000000..41201ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt
@@ -0,0 +1,14 @@
+Phytec phycore AC97
+
+Required properties:
+- compatible: "phytec,phycore-ac97"
+- phytec,ssi: A phandle to the ssi device that is connected to ac97.
+- phytec,audmux: A phandle to the audmux device.
+
+Example:
+
+sound {
+ compatible = "phytec,phycore-ac97";
+ phytec,ssi = <&ssi1>;
+ phytec,audmux = <&audmux>;
+};
diff --git a/sound/soc/fsl/phycore-ac97.c b/sound/soc/fsl/phycore-ac97.c
index f8da6dd..d9f3ac7 100644
--- a/sound/soc/fsl/phycore-ac97.c
+++ b/sound/soc/fsl/phycore-ac97.c
@@ -21,7 +21,10 @@
#include "imx-audmux.h"
+#define DRV_NAME "phycore-audio-fabric"
+
static struct snd_soc_card imx_phycore;
+static struct device_node *phycore_dai_cpu_node;
static struct snd_soc_ops imx_phycore_hifi_ops = {
};
@@ -32,8 +35,12 @@ static struct snd_soc_dai_link imx_phycore_dai_ac97[] = {
.stream_name = "HiFi",
.codec_dai_name = "wm9712-hifi",
.codec_name = "wm9712-codec",
+#ifdef CONFIG_MACH_IMX27_DT
+ .platform_name = "imx-fiq-pcm-audio",
+#else
.cpu_dai_name = "imx-ssi.0",
.platform_name = "imx-fiq-pcm-audio.0",
+#endif
.ops = &imx_phycore_hifi_ops,
},
};
@@ -45,35 +52,48 @@ static struct snd_soc_card imx_phycore = {
.num_links = ARRAY_SIZE(imx_phycore_dai_ac97),
};
-static struct platform_device *imx_phycore_snd_ac97_device;
+static void phycore_ac97_imx21_audmux(void)
+{
+ imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+ IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V1_PCR_TFCSEL(3) |
+ IMX_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+ IMX_AUDMUX_V1_PCR_RXDSEL(3));
+ imx_audmux_v1_configure_port(3,
+ IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V1_PCR_TFCSEL(0) |
+ IMX_AUDMUX_V1_PCR_TFSDIR |
+ IMX_AUDMUX_V1_PCR_RXDSEL(0));
+}
+
+static void phycore_ac97_imx31_audmux(void)
+{
+ imx_audmux_v2_configure_port(3,
+ IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V2_PTCR_TFSEL(0) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR,
+ IMX_AUDMUX_V2_PDCR_RXDSEL(0));
+ imx_audmux_v2_configure_port(0,
+ IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V2_PTCR_TCSEL(3) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+ IMX_AUDMUX_V2_PDCR_RXDSEL(3));
+}
+
static struct platform_device *imx_phycore_snd_device;
+#ifndef CONFIG_MACH_IMX27_DT
+
+static struct platform_device *imx_phycore_snd_ac97_device;
+
static int __init imx_phycore_init(void)
{
int ret;
if (machine_is_pca100()) {
- imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
- IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V1_PCR_TFCSEL(3) |
- IMX_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
- IMX_AUDMUX_V1_PCR_RXDSEL(3));
- imx_audmux_v1_configure_port(3,
- IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V1_PCR_TFCSEL(0) |
- IMX_AUDMUX_V1_PCR_TFSDIR |
- IMX_AUDMUX_V1_PCR_RXDSEL(0));
+ phycore_ac97_imx21_audmux();
} else if (machine_is_pcm043()) {
- imx_audmux_v2_configure_port(3,
- IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V2_PTCR_TFSEL(0) |
- IMX_AUDMUX_V2_PTCR_TFSDIR,
- IMX_AUDMUX_V2_PDCR_RXDSEL(0));
- imx_audmux_v2_configure_port(0,
- IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V2_PTCR_TCSEL(3) |
- IMX_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
- IMX_AUDMUX_V2_PDCR_RXDSEL(3));
+ phycore_ac97_imx31_audmux();
} else {
/* return happy. We might run on a totally different machine */
return 0;
@@ -120,6 +140,108 @@ static void __exit imx_phycore_exit(void)
late_initcall(imx_phycore_init);
module_exit(imx_phycore_exit);
+#else /* !CONFIG_MACH_IMX27_DT */
+
+static const struct of_device_id imx_phycore_ac97_of_dev_id[] = {
+ {
+ .compatible = "phytec,phycore-ac97",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, imx_phycore_ac97_of_dev_id);
+
+static int phycore_ac97_setup_devices(struct platform_device *pdev)
+{
+ int ret;
+
+ imx_phycore_snd_device = platform_device_alloc("wm9712-codec", -1);
+ if (!imx_phycore_snd_device)
+ return -ENOMEM;
+
+ ret = platform_device_add(imx_phycore_snd_device);
+ if (ret) {
+ dev_err(&pdev->dev, "ASoC: Platform device allocation failed\n");
+ goto fail1;
+ }
+
+ ret = snd_soc_register_card(&imx_phycore);
+ if (ret) {
+ dev_err(&pdev->dev, "ASoC: soc card registration failed\n");
+ goto fail2;
+ }
+ return 0;
+
+fail2:
+ platform_device_del(imx_phycore_snd_device);
+fail1:
+ platform_device_put(imx_phycore_snd_device);
+ return ret;
+}
+
+static int imx_phycore_ac97_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device_node *ssi_np;
+ struct device_node *audmux_np;
+
+ imx_phycore.dev = &pdev->dev;
+
+ audmux_np = of_parse_phandle(pdev->dev.of_node, "phytec,audmux", 0);
+ if (!audmux_np) {
+ dev_err(&pdev->dev, "Failed to parse phytec,audmux phandle\n");
+ return -EINVAL;
+ }
+
+ if (of_device_is_compatible(audmux_np, "fsl,imx21-audmux")) {
+ phycore_ac97_imx21_audmux();
+ } else if (of_device_is_compatible(audmux_np, "fsl,imx31-audmux")) {
+ phycore_ac97_imx31_audmux();
+ } else {
+ dev_err(&pdev->dev, "Unknown audmux, failed to setup audmux\n");
+ of_node_put(audmux_np);
+ return -EINVAL;
+ }
+ of_node_put(audmux_np);
+
+ ssi_np = of_parse_phandle(pdev->dev.of_node, "phytec,ssi", 0);
+ if (!ssi_np) {
+ dev_err(&pdev->dev, "No valid ssi phandle found\n");
+ return -EINVAL;
+ }
+
+ imx_phycore_dai_ac97[0].cpu_of_node = ssi_np;
+ phycore_dai_cpu_node = ssi_np;
+
+
+ ret = phycore_ac97_setup_devices(pdev);
+ if (ret)
+ of_node_put(phycore_dai_cpu_node);
+
+ return ret;
+}
+
+static int imx_phycore_ac97_remove(struct platform_device *pdev)
+{
+ of_node_put(phycore_dai_cpu_node);
+ platform_device_unregister(imx_phycore_snd_device);
+ return 0;
+}
+
+static struct platform_driver imx_phycore_ac97_driver = {
+ .probe = imx_phycore_ac97_probe,
+ .remove = imx_phycore_ac97_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = imx_phycore_ac97_of_dev_id,
+ },
+};
+
+module_platform_driver(imx_phycore_ac97_driver);
+
+#endif /* CONFIG_MACH_IMX27_DT */
+
MODULE_AUTHOR("Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>");
-MODULE_DESCRIPTION("PhyCORE ALSA SoC driver");
+MODULE_DESCRIPTION(DRV_NAME ": PhyCORE ALSA SoC fabric driver");
MODULE_LICENSE("GPL");
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 01/10] ASoC: phycore-ac97: Add DT support
@ 2013-04-18 12:33 ` Markus Pargmann
0 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel
Add devicetree support for this audio soc fabric driver.
DT initialized drivers do not have real device ids, so
imx-pcm-fiq-audio.0 is used without '.0'.
This patch also simplifies the way audmux ports are configured. Before
there was knowledge about the used board. As the audmux driver knows the
used board, we know use the returned errorcodes to correctly set the
audmux port. So this driver does not have to know which board it is
running on.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
Notes:
Changes in v4:
- New property phytec,audmux to check which audmux setup should be
executed. Checking for fsl,imx21-audmux and fsl,imx31-audmux.
Changes in v3:
- Add some more information in the commit message.
Changes in v2:
- Simplify the driver, by combining audmux port configurations. The
audmux driver actually knows on which platform he is running and
will return the appropriate error code if we use functions for
another platform. So we don't need to have the knowledge about it
in phycore-ac97 and can try both functions. This removes the need
of different compatibilities and renames it to phycore-ac97.
- Use a phandle for the cpu_dai link.
- Add devicetree binding documentation.
- Rename binding to phytec,phycore-ac97 and fsl,ssi to phytec,ssi
Changes in v2:
- Simplify the driver, by combining audmux port configurations. The
audmux driver actually knows on which platform he is running and
will return the appropriate error code if we use functions for
another platform. So we don't need to have the knowledge about it
in phycore-ac97 and can try both functions. This removes the need
of different compatibilities and renames it to imx27-ac97.
- Use a phandle for the cpu_dai link.
- Add devicetree binding documentation.
- Rename binding to phytec,phycore-ac97 and fsl,ssi to phytec,ssi
.../bindings/sound/phytec,phycore-ac97.txt | 14 ++
sound/soc/fsl/phycore-ac97.c | 166 ++++++++++++++++++---
2 files changed, 158 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt
diff --git a/Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt b/Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt
new file mode 100644
index 0000000..41201ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt
@@ -0,0 +1,14 @@
+Phytec phycore AC97
+
+Required properties:
+- compatible: "phytec,phycore-ac97"
+- phytec,ssi: A phandle to the ssi device that is connected to ac97.
+- phytec,audmux: A phandle to the audmux device.
+
+Example:
+
+sound {
+ compatible = "phytec,phycore-ac97";
+ phytec,ssi = <&ssi1>;
+ phytec,audmux = <&audmux>;
+};
diff --git a/sound/soc/fsl/phycore-ac97.c b/sound/soc/fsl/phycore-ac97.c
index f8da6dd..d9f3ac7 100644
--- a/sound/soc/fsl/phycore-ac97.c
+++ b/sound/soc/fsl/phycore-ac97.c
@@ -21,7 +21,10 @@
#include "imx-audmux.h"
+#define DRV_NAME "phycore-audio-fabric"
+
static struct snd_soc_card imx_phycore;
+static struct device_node *phycore_dai_cpu_node;
static struct snd_soc_ops imx_phycore_hifi_ops = {
};
@@ -32,8 +35,12 @@ static struct snd_soc_dai_link imx_phycore_dai_ac97[] = {
.stream_name = "HiFi",
.codec_dai_name = "wm9712-hifi",
.codec_name = "wm9712-codec",
+#ifdef CONFIG_MACH_IMX27_DT
+ .platform_name = "imx-fiq-pcm-audio",
+#else
.cpu_dai_name = "imx-ssi.0",
.platform_name = "imx-fiq-pcm-audio.0",
+#endif
.ops = &imx_phycore_hifi_ops,
},
};
@@ -45,35 +52,48 @@ static struct snd_soc_card imx_phycore = {
.num_links = ARRAY_SIZE(imx_phycore_dai_ac97),
};
-static struct platform_device *imx_phycore_snd_ac97_device;
+static void phycore_ac97_imx21_audmux(void)
+{
+ imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+ IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V1_PCR_TFCSEL(3) |
+ IMX_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+ IMX_AUDMUX_V1_PCR_RXDSEL(3));
+ imx_audmux_v1_configure_port(3,
+ IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V1_PCR_TFCSEL(0) |
+ IMX_AUDMUX_V1_PCR_TFSDIR |
+ IMX_AUDMUX_V1_PCR_RXDSEL(0));
+}
+
+static void phycore_ac97_imx31_audmux(void)
+{
+ imx_audmux_v2_configure_port(3,
+ IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V2_PTCR_TFSEL(0) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR,
+ IMX_AUDMUX_V2_PDCR_RXDSEL(0));
+ imx_audmux_v2_configure_port(0,
+ IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V2_PTCR_TCSEL(3) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+ IMX_AUDMUX_V2_PDCR_RXDSEL(3));
+}
+
static struct platform_device *imx_phycore_snd_device;
+#ifndef CONFIG_MACH_IMX27_DT
+
+static struct platform_device *imx_phycore_snd_ac97_device;
+
static int __init imx_phycore_init(void)
{
int ret;
if (machine_is_pca100()) {
- imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
- IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V1_PCR_TFCSEL(3) |
- IMX_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
- IMX_AUDMUX_V1_PCR_RXDSEL(3));
- imx_audmux_v1_configure_port(3,
- IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V1_PCR_TFCSEL(0) |
- IMX_AUDMUX_V1_PCR_TFSDIR |
- IMX_AUDMUX_V1_PCR_RXDSEL(0));
+ phycore_ac97_imx21_audmux();
} else if (machine_is_pcm043()) {
- imx_audmux_v2_configure_port(3,
- IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V2_PTCR_TFSEL(0) |
- IMX_AUDMUX_V2_PTCR_TFSDIR,
- IMX_AUDMUX_V2_PDCR_RXDSEL(0));
- imx_audmux_v2_configure_port(0,
- IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V2_PTCR_TCSEL(3) |
- IMX_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
- IMX_AUDMUX_V2_PDCR_RXDSEL(3));
+ phycore_ac97_imx31_audmux();
} else {
/* return happy. We might run on a totally different machine */
return 0;
@@ -120,6 +140,108 @@ static void __exit imx_phycore_exit(void)
late_initcall(imx_phycore_init);
module_exit(imx_phycore_exit);
+#else /* !CONFIG_MACH_IMX27_DT */
+
+static const struct of_device_id imx_phycore_ac97_of_dev_id[] = {
+ {
+ .compatible = "phytec,phycore-ac97",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, imx_phycore_ac97_of_dev_id);
+
+static int phycore_ac97_setup_devices(struct platform_device *pdev)
+{
+ int ret;
+
+ imx_phycore_snd_device = platform_device_alloc("wm9712-codec", -1);
+ if (!imx_phycore_snd_device)
+ return -ENOMEM;
+
+ ret = platform_device_add(imx_phycore_snd_device);
+ if (ret) {
+ dev_err(&pdev->dev, "ASoC: Platform device allocation failed\n");
+ goto fail1;
+ }
+
+ ret = snd_soc_register_card(&imx_phycore);
+ if (ret) {
+ dev_err(&pdev->dev, "ASoC: soc card registration failed\n");
+ goto fail2;
+ }
+ return 0;
+
+fail2:
+ platform_device_del(imx_phycore_snd_device);
+fail1:
+ platform_device_put(imx_phycore_snd_device);
+ return ret;
+}
+
+static int imx_phycore_ac97_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device_node *ssi_np;
+ struct device_node *audmux_np;
+
+ imx_phycore.dev = &pdev->dev;
+
+ audmux_np = of_parse_phandle(pdev->dev.of_node, "phytec,audmux", 0);
+ if (!audmux_np) {
+ dev_err(&pdev->dev, "Failed to parse phytec,audmux phandle\n");
+ return -EINVAL;
+ }
+
+ if (of_device_is_compatible(audmux_np, "fsl,imx21-audmux")) {
+ phycore_ac97_imx21_audmux();
+ } else if (of_device_is_compatible(audmux_np, "fsl,imx31-audmux")) {
+ phycore_ac97_imx31_audmux();
+ } else {
+ dev_err(&pdev->dev, "Unknown audmux, failed to setup audmux\n");
+ of_node_put(audmux_np);
+ return -EINVAL;
+ }
+ of_node_put(audmux_np);
+
+ ssi_np = of_parse_phandle(pdev->dev.of_node, "phytec,ssi", 0);
+ if (!ssi_np) {
+ dev_err(&pdev->dev, "No valid ssi phandle found\n");
+ return -EINVAL;
+ }
+
+ imx_phycore_dai_ac97[0].cpu_of_node = ssi_np;
+ phycore_dai_cpu_node = ssi_np;
+
+
+ ret = phycore_ac97_setup_devices(pdev);
+ if (ret)
+ of_node_put(phycore_dai_cpu_node);
+
+ return ret;
+}
+
+static int imx_phycore_ac97_remove(struct platform_device *pdev)
+{
+ of_node_put(phycore_dai_cpu_node);
+ platform_device_unregister(imx_phycore_snd_device);
+ return 0;
+}
+
+static struct platform_driver imx_phycore_ac97_driver = {
+ .probe = imx_phycore_ac97_probe,
+ .remove = imx_phycore_ac97_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = imx_phycore_ac97_of_dev_id,
+ },
+};
+
+module_platform_driver(imx_phycore_ac97_driver);
+
+#endif /* CONFIG_MACH_IMX27_DT */
+
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-MODULE_DESCRIPTION("PhyCORE ALSA SoC driver");
+MODULE_DESCRIPTION(DRV_NAME ": PhyCORE ALSA SoC fabric driver");
MODULE_LICENSE("GPL");
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support
2013-04-18 12:33 ` Markus Pargmann
@ 2013-04-18 12:33 ` Markus Pargmann
-1 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Fabio Estevam, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
Lars-Peter Clausen, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
Mark Brown, Timur Tabi, Liam Girdwood, Sascha Hauer
This patch adds the possibility to pass a of_node as platform_data which
is used by generic-pcm-dma to request a DMA slave channel.
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
sound/soc/fsl/imx-pcm-dma.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c
index c246fb5..8945d22 100644
--- a/sound/soc/fsl/imx-pcm-dma.c
+++ b/sound/soc/fsl/imx-pcm-dma.c
@@ -62,9 +62,11 @@ static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = {
int imx_pcm_dma_init(struct platform_device *pdev)
{
+ if (pdev->dev.platform_data)
+ pdev->dev.of_node = pdev->dev.platform_data;
+
return snd_dmaengine_pcm_register(&pdev->dev, &imx_dmaengine_pcm_config,
SND_DMAENGINE_PCM_FLAG_NO_RESIDUE |
- SND_DMAENGINE_PCM_FLAG_NO_DT |
SND_DMAENGINE_PCM_FLAG_COMPAT);
}
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support
@ 2013-04-18 12:33 ` Markus Pargmann
0 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds the possibility to pass a of_node as platform_data which
is used by generic-pcm-dma to request a DMA slave channel.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
sound/soc/fsl/imx-pcm-dma.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c
index c246fb5..8945d22 100644
--- a/sound/soc/fsl/imx-pcm-dma.c
+++ b/sound/soc/fsl/imx-pcm-dma.c
@@ -62,9 +62,11 @@ static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = {
int imx_pcm_dma_init(struct platform_device *pdev)
{
+ if (pdev->dev.platform_data)
+ pdev->dev.of_node = pdev->dev.platform_data;
+
return snd_dmaengine_pcm_register(&pdev->dev, &imx_dmaengine_pcm_config,
SND_DMAENGINE_PCM_FLAG_NO_RESIDUE |
- SND_DMAENGINE_PCM_FLAG_NO_DT |
SND_DMAENGINE_PCM_FLAG_COMPAT);
}
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support
2013-04-18 12:33 ` Markus Pargmann
@ 2013-04-18 14:43 ` Lars-Peter Clausen
-1 siblings, 0 replies; 28+ messages in thread
From: Lars-Peter Clausen @ 2013-04-18 14:43 UTC (permalink / raw)
To: Markus Pargmann
Cc: Fabio Estevam, alsa-devel, devicetree-discuss, Mark Brown,
Timur Tabi, Liam Girdwood, Grant Likely, Sascha Hauer, Shawn Guo,
linux-arm-kernel
On 04/18/2013 02:33 PM, Markus Pargmann wrote:
> This patch adds the possibility to pass a of_node as platform_data which
> is used by generic-pcm-dma to request a DMA slave channel.
>
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> ---
> sound/soc/fsl/imx-pcm-dma.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c
> index c246fb5..8945d22 100644
> --- a/sound/soc/fsl/imx-pcm-dma.c
> +++ b/sound/soc/fsl/imx-pcm-dma.c
> @@ -62,9 +62,11 @@ static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = {
>
> int imx_pcm_dma_init(struct platform_device *pdev)
> {
> + if (pdev->dev.platform_data)
> + pdev->dev.of_node = pdev->dev.platform_data;
In my opinion it's better to use pdev->dev.parent->of_node here. In the ssi
driver you use platform_device_register_data, which will create a copy of
the of_node you pass in as platform data. I'm not quite sure how well this
will work. If you want to continue to use platform_data you should at least
change the code in the ssi driver to not make a copy of the of_node.
- Lars
> +
> return snd_dmaengine_pcm_register(&pdev->dev, &imx_dmaengine_pcm_config,
> SND_DMAENGINE_PCM_FLAG_NO_RESIDUE |
> - SND_DMAENGINE_PCM_FLAG_NO_DT |
> SND_DMAENGINE_PCM_FLAG_COMPAT);
> }
>
^ permalink raw reply [flat|nested] 28+ messages in thread* [alsa-devel] [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support
@ 2013-04-18 14:43 ` Lars-Peter Clausen
0 siblings, 0 replies; 28+ messages in thread
From: Lars-Peter Clausen @ 2013-04-18 14:43 UTC (permalink / raw)
To: linux-arm-kernel
On 04/18/2013 02:33 PM, Markus Pargmann wrote:
> This patch adds the possibility to pass a of_node as platform_data which
> is used by generic-pcm-dma to request a DMA slave channel.
>
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> ---
> sound/soc/fsl/imx-pcm-dma.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c
> index c246fb5..8945d22 100644
> --- a/sound/soc/fsl/imx-pcm-dma.c
> +++ b/sound/soc/fsl/imx-pcm-dma.c
> @@ -62,9 +62,11 @@ static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = {
>
> int imx_pcm_dma_init(struct platform_device *pdev)
> {
> + if (pdev->dev.platform_data)
> + pdev->dev.of_node = pdev->dev.platform_data;
In my opinion it's better to use pdev->dev.parent->of_node here. In the ssi
driver you use platform_device_register_data, which will create a copy of
the of_node you pass in as platform data. I'm not quite sure how well this
will work. If you want to continue to use platform_data you should at least
change the code in the ssi driver to not make a copy of the of_node.
- Lars
> +
> return snd_dmaengine_pcm_register(&pdev->dev, &imx_dmaengine_pcm_config,
> SND_DMAENGINE_PCM_FLAG_NO_RESIDUE |
> - SND_DMAENGINE_PCM_FLAG_NO_DT |
> SND_DMAENGINE_PCM_FLAG_COMPAT);
> }
>
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support
2013-04-18 14:43 ` [alsa-devel] " Lars-Peter Clausen
@ 2013-04-18 14:56 ` Mark Brown
-1 siblings, 0 replies; 28+ messages in thread
From: Mark Brown @ 2013-04-18 14:56 UTC (permalink / raw)
To: Lars-Peter Clausen
Cc: Fabio Estevam, alsa-devel, devicetree-discuss, Timur Tabi,
Liam Girdwood, Grant Likely, Sascha Hauer, Markus Pargmann,
Shawn Guo, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 650 bytes --]
On Thu, Apr 18, 2013 at 04:43:43PM +0200, Lars-Peter Clausen wrote:
> On 04/18/2013 02:33 PM, Markus Pargmann wrote:
> > + if (pdev->dev.platform_data)
> > + pdev->dev.of_node = pdev->dev.platform_data;
> In my opinion it's better to use pdev->dev.parent->of_node here. In the ssi
> driver you use platform_device_register_data, which will create a copy of
> the of_node you pass in as platform data. I'm not quite sure how well this
> will work. If you want to continue to use platform_data you should at least
> change the code in the ssi driver to not make a copy of the of_node.
If nothing else the above code just looks wrong and confusing.
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 28+ messages in thread
* [alsa-devel] [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support
@ 2013-04-18 14:56 ` Mark Brown
0 siblings, 0 replies; 28+ messages in thread
From: Mark Brown @ 2013-04-18 14:56 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Apr 18, 2013 at 04:43:43PM +0200, Lars-Peter Clausen wrote:
> On 04/18/2013 02:33 PM, Markus Pargmann wrote:
> > + if (pdev->dev.platform_data)
> > + pdev->dev.of_node = pdev->dev.platform_data;
> In my opinion it's better to use pdev->dev.parent->of_node here. In the ssi
> driver you use platform_device_register_data, which will create a copy of
> the of_node you pass in as platform data. I'm not quite sure how well this
> will work. If you want to continue to use platform_data you should at least
> change the code in the ssi driver to not make a copy of the of_node.
If nothing else the above code just looks wrong and confusing.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130418/2fc43ee6/attachment-0001.sig>
^ permalink raw reply [flat|nested] 28+ messages in thread
[parent not found: <5170069F.4030200-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>]
* Re: [alsa-devel] [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support
2013-04-18 14:43 ` [alsa-devel] " Lars-Peter Clausen
@ 2013-04-18 15:35 ` Markus Pargmann
-1 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 15:35 UTC (permalink / raw)
To: Lars-Peter Clausen
Cc: Fabio Estevam, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Mark Brown, Timur Tabi,
Liam Girdwood, Sascha Hauer,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Thu, Apr 18, 2013 at 04:43:43PM +0200, Lars-Peter Clausen wrote:
> On 04/18/2013 02:33 PM, Markus Pargmann wrote:
> > This patch adds the possibility to pass a of_node as platform_data which
> > is used by generic-pcm-dma to request a DMA slave channel.
> >
> > Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> > ---
> > sound/soc/fsl/imx-pcm-dma.c | 4 +++-
> > 1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c
> > index c246fb5..8945d22 100644
> > --- a/sound/soc/fsl/imx-pcm-dma.c
> > +++ b/sound/soc/fsl/imx-pcm-dma.c
> > @@ -62,9 +62,11 @@ static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = {
> >
> > int imx_pcm_dma_init(struct platform_device *pdev)
> > {
> > + if (pdev->dev.platform_data)
> > + pdev->dev.of_node = pdev->dev.platform_data;
>
> In my opinion it's better to use pdev->dev.parent->of_node here. In the ssi
> driver you use platform_device_register_data, which will create a copy of
> the of_node you pass in as platform data. I'm not quite sure how well this
> will work. If you want to continue to use platform_data you should at least
> change the code in the ssi driver to not make a copy of the of_node.
Thanks, I did not think about using the parent, that is much easier. I
changed it for the next version.
Regards,
Markus
>
> - Lars
>
> > +
> > return snd_dmaengine_pcm_register(&pdev->dev, &imx_dmaengine_pcm_config,
> > SND_DMAENGINE_PCM_FLAG_NO_RESIDUE |
> > - SND_DMAENGINE_PCM_FLAG_NO_DT |
> > SND_DMAENGINE_PCM_FLAG_COMPAT);
> > }
> >
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 28+ messages in thread* [alsa-devel] [PATCH v4 02/10] ASoC: imx-pcm-dma: DT support
@ 2013-04-18 15:35 ` Markus Pargmann
0 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 15:35 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Apr 18, 2013 at 04:43:43PM +0200, Lars-Peter Clausen wrote:
> On 04/18/2013 02:33 PM, Markus Pargmann wrote:
> > This patch adds the possibility to pass a of_node as platform_data which
> > is used by generic-pcm-dma to request a DMA slave channel.
> >
> > Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> > ---
> > sound/soc/fsl/imx-pcm-dma.c | 4 +++-
> > 1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c
> > index c246fb5..8945d22 100644
> > --- a/sound/soc/fsl/imx-pcm-dma.c
> > +++ b/sound/soc/fsl/imx-pcm-dma.c
> > @@ -62,9 +62,11 @@ static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = {
> >
> > int imx_pcm_dma_init(struct platform_device *pdev)
> > {
> > + if (pdev->dev.platform_data)
> > + pdev->dev.of_node = pdev->dev.platform_data;
>
> In my opinion it's better to use pdev->dev.parent->of_node here. In the ssi
> driver you use platform_device_register_data, which will create a copy of
> the of_node you pass in as platform data. I'm not quite sure how well this
> will work. If you want to continue to use platform_data you should at least
> change the code in the ssi driver to not make a copy of the of_node.
Thanks, I did not think about using the parent, that is much easier. I
changed it for the next version.
Regards,
Markus
>
> - Lars
>
> > +
> > return snd_dmaengine_pcm_register(&pdev->dev, &imx_dmaengine_pcm_config,
> > SND_DMAENGINE_PCM_FLAG_NO_RESIDUE |
> > - SND_DMAENGINE_PCM_FLAG_NO_DT |
> > SND_DMAENGINE_PCM_FLAG_COMPAT);
> > }
> >
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v4 03/10] ASoC: imx-pcm-fiq: Introduce pcm-fiq-params
2013-04-18 12:33 ` Markus Pargmann
@ 2013-04-18 12:33 ` Markus Pargmann
-1 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Fabio Estevam, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
Lars-Peter Clausen, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
Mark Brown, Timur Tabi, Liam Girdwood, Sascha Hauer
Cleaner parameter passing for imx-pcm-fiq. Create a seperated fiq-params
struct to pass all arguments.
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
Notes:
Changes in v3:
- Using snd_dmaengine_dai_dma_data for dma_params after rebasing onto
dmaengine cleanups.
sound/soc/fsl/imx-pcm-fiq.c | 16 +++++++++-------
sound/soc/fsl/imx-pcm.h | 9 +++++++++
sound/soc/fsl/imx-ssi.c | 7 ++++++-
sound/soc/fsl/imx-ssi.h | 1 +
4 files changed, 25 insertions(+), 8 deletions(-)
diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c
index 670b96b..c3fdb2f 100644
--- a/sound/soc/fsl/imx-pcm-fiq.c
+++ b/sound/soc/fsl/imx-pcm-fiq.c
@@ -22,6 +22,7 @@
#include <linux/slab.h>
#include <sound/core.h>
+#include <sound/dmaengine_pcm.h>
#include <sound/initval.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -32,6 +33,7 @@
#include <linux/platform_data/asoc-imx-ssi.h>
#include "imx-ssi.h"
+#include "imx-pcm.h"
struct imx_pcm_runtime_data {
unsigned int period;
@@ -283,7 +285,7 @@ static struct snd_soc_platform_driver imx_soc_platform_fiq = {
int imx_pcm_fiq_init(struct platform_device *pdev)
{
- struct imx_ssi *ssi = platform_get_drvdata(pdev);
+ struct imx_pcm_fiq_params *params = platform_get_drvdata(pdev);
int ret;
ret = claim_fiq(&fh);
@@ -292,15 +294,15 @@ int imx_pcm_fiq_init(struct platform_device *pdev)
return ret;
}
- mxc_set_irq_fiq(ssi->irq, 1);
- ssi_irq = ssi->irq;
+ mxc_set_irq_fiq(params->irq, 1);
+ ssi_irq = params->irq;
- imx_pcm_fiq = ssi->irq;
+ imx_pcm_fiq = params->irq;
- imx_ssi_fiq_base = (unsigned long)ssi->base;
+ imx_ssi_fiq_base = (unsigned long)params->base;
- ssi->dma_params_tx.maxburst = 4;
- ssi->dma_params_rx.maxburst = 6;
+ params->dma_params_tx->maxburst = 4;
+ params->dma_params_rx->maxburst = 6;
ret = snd_soc_register_platform(&pdev->dev, &imx_soc_platform_fiq);
if (ret)
diff --git a/sound/soc/fsl/imx-pcm.h b/sound/soc/fsl/imx-pcm.h
index b7fa0d7..f592f23 100644
--- a/sound/soc/fsl/imx-pcm.h
+++ b/sound/soc/fsl/imx-pcm.h
@@ -32,6 +32,15 @@ imx_pcm_dma_params_init_data(struct imx_dma_data *dma_data,
dma_data->peripheral_type = IMX_DMATYPE_SSI;
}
+struct imx_pcm_fiq_params {
+ int irq;
+ void __iomem *base;
+
+ /* Pointer to original ssi driver to setup tx rx sizes */
+ struct snd_dmaengine_dai_dma_data *dma_params_rx;
+ struct snd_dmaengine_dai_dma_data *dma_params_tx;
+};
+
int snd_imx_pcm_mmap(struct snd_pcm_substream *substream,
struct vm_area_struct *vma);
int imx_pcm_new(struct snd_soc_pcm_runtime *rtd);
diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c
index 902fab0..f80f4c7 100644
--- a/sound/soc/fsl/imx-ssi.c
+++ b/sound/soc/fsl/imx-ssi.c
@@ -601,7 +601,12 @@ static int imx_ssi_probe(struct platform_device *pdev)
goto failed_pdev_fiq_alloc;
}
- platform_set_drvdata(ssi->soc_platform_pdev_fiq, ssi);
+ ssi->fiq_params.irq = ssi->irq;
+ ssi->fiq_params.base = ssi->base;
+ ssi->fiq_params.dma_params_rx = &ssi->dma_params_rx;
+ ssi->fiq_params.dma_params_tx = &ssi->dma_params_tx;
+
+ platform_set_drvdata(ssi->soc_platform_pdev_fiq, &ssi->fiq_params);
ret = platform_device_add(ssi->soc_platform_pdev_fiq);
if (ret) {
dev_err(&pdev->dev, "failed to add platform device\n");
diff --git a/sound/soc/fsl/imx-ssi.h b/sound/soc/fsl/imx-ssi.h
index bb6b3db..20ce7ca 100644
--- a/sound/soc/fsl/imx-ssi.h
+++ b/sound/soc/fsl/imx-ssi.h
@@ -209,6 +209,7 @@ struct imx_ssi {
struct snd_dmaengine_dai_dma_data dma_params_tx;
struct imx_dma_data filter_data_tx;
struct imx_dma_data filter_data_rx;
+ struct imx_pcm_fiq_params fiq_params;
int enabled;
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 03/10] ASoC: imx-pcm-fiq: Introduce pcm-fiq-params
@ 2013-04-18 12:33 ` Markus Pargmann
0 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel
Cleaner parameter passing for imx-pcm-fiq. Create a seperated fiq-params
struct to pass all arguments.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
Notes:
Changes in v3:
- Using snd_dmaengine_dai_dma_data for dma_params after rebasing onto
dmaengine cleanups.
sound/soc/fsl/imx-pcm-fiq.c | 16 +++++++++-------
sound/soc/fsl/imx-pcm.h | 9 +++++++++
sound/soc/fsl/imx-ssi.c | 7 ++++++-
sound/soc/fsl/imx-ssi.h | 1 +
4 files changed, 25 insertions(+), 8 deletions(-)
diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c
index 670b96b..c3fdb2f 100644
--- a/sound/soc/fsl/imx-pcm-fiq.c
+++ b/sound/soc/fsl/imx-pcm-fiq.c
@@ -22,6 +22,7 @@
#include <linux/slab.h>
#include <sound/core.h>
+#include <sound/dmaengine_pcm.h>
#include <sound/initval.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -32,6 +33,7 @@
#include <linux/platform_data/asoc-imx-ssi.h>
#include "imx-ssi.h"
+#include "imx-pcm.h"
struct imx_pcm_runtime_data {
unsigned int period;
@@ -283,7 +285,7 @@ static struct snd_soc_platform_driver imx_soc_platform_fiq = {
int imx_pcm_fiq_init(struct platform_device *pdev)
{
- struct imx_ssi *ssi = platform_get_drvdata(pdev);
+ struct imx_pcm_fiq_params *params = platform_get_drvdata(pdev);
int ret;
ret = claim_fiq(&fh);
@@ -292,15 +294,15 @@ int imx_pcm_fiq_init(struct platform_device *pdev)
return ret;
}
- mxc_set_irq_fiq(ssi->irq, 1);
- ssi_irq = ssi->irq;
+ mxc_set_irq_fiq(params->irq, 1);
+ ssi_irq = params->irq;
- imx_pcm_fiq = ssi->irq;
+ imx_pcm_fiq = params->irq;
- imx_ssi_fiq_base = (unsigned long)ssi->base;
+ imx_ssi_fiq_base = (unsigned long)params->base;
- ssi->dma_params_tx.maxburst = 4;
- ssi->dma_params_rx.maxburst = 6;
+ params->dma_params_tx->maxburst = 4;
+ params->dma_params_rx->maxburst = 6;
ret = snd_soc_register_platform(&pdev->dev, &imx_soc_platform_fiq);
if (ret)
diff --git a/sound/soc/fsl/imx-pcm.h b/sound/soc/fsl/imx-pcm.h
index b7fa0d7..f592f23 100644
--- a/sound/soc/fsl/imx-pcm.h
+++ b/sound/soc/fsl/imx-pcm.h
@@ -32,6 +32,15 @@ imx_pcm_dma_params_init_data(struct imx_dma_data *dma_data,
dma_data->peripheral_type = IMX_DMATYPE_SSI;
}
+struct imx_pcm_fiq_params {
+ int irq;
+ void __iomem *base;
+
+ /* Pointer to original ssi driver to setup tx rx sizes */
+ struct snd_dmaengine_dai_dma_data *dma_params_rx;
+ struct snd_dmaengine_dai_dma_data *dma_params_tx;
+};
+
int snd_imx_pcm_mmap(struct snd_pcm_substream *substream,
struct vm_area_struct *vma);
int imx_pcm_new(struct snd_soc_pcm_runtime *rtd);
diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c
index 902fab0..f80f4c7 100644
--- a/sound/soc/fsl/imx-ssi.c
+++ b/sound/soc/fsl/imx-ssi.c
@@ -601,7 +601,12 @@ static int imx_ssi_probe(struct platform_device *pdev)
goto failed_pdev_fiq_alloc;
}
- platform_set_drvdata(ssi->soc_platform_pdev_fiq, ssi);
+ ssi->fiq_params.irq = ssi->irq;
+ ssi->fiq_params.base = ssi->base;
+ ssi->fiq_params.dma_params_rx = &ssi->dma_params_rx;
+ ssi->fiq_params.dma_params_tx = &ssi->dma_params_tx;
+
+ platform_set_drvdata(ssi->soc_platform_pdev_fiq, &ssi->fiq_params);
ret = platform_device_add(ssi->soc_platform_pdev_fiq);
if (ret) {
dev_err(&pdev->dev, "failed to add platform device\n");
diff --git a/sound/soc/fsl/imx-ssi.h b/sound/soc/fsl/imx-ssi.h
index bb6b3db..20ce7ca 100644
--- a/sound/soc/fsl/imx-ssi.h
+++ b/sound/soc/fsl/imx-ssi.h
@@ -209,6 +209,7 @@ struct imx_ssi {
struct snd_dmaengine_dai_dma_data dma_params_tx;
struct imx_dma_data filter_data_tx;
struct imx_dma_data filter_data_rx;
+ struct imx_pcm_fiq_params fiq_params;
int enabled;
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 04/10] ASoC: fsl-ssi: Add support for imx-pcm-fiq
2013-04-18 12:33 ` Markus Pargmann
@ 2013-04-18 12:33 ` Markus Pargmann
-1 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Fabio Estevam, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
Lars-Peter Clausen, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
Mark Brown, Timur Tabi, Liam Girdwood, Sascha Hauer
Add support for non-dma pcm for imx platforms with imx-pcm-fiq support.
Instead of imx-pcm-audio, in this case imx-pcm-fiq-audio device is added
and the SIER flags are set differently.
We need imx-pcm-fiq for some boards that use an incompatible codec.
imx-pcm-fiq handles those codecs differently and allows to operate with
them. DMA is not possible because some data sent by the codecs, e.g.
wm9712, is not in the datastream. Also some data is mixed up in the
fifos, so that we need to sort them out manually.
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
Notes:
Changes in v4:
- Add a comment about the reason why we add a imx-pcm-fiq device.
- Change commit message to include information about the usage of imx-pcm-fiq
Changes in v3:
- Rename bool "dma" to "use_dma"
sound/soc/fsl/fsl_ssi.c | 94 +++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 80 insertions(+), 14 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 0f0bed6..5165d41 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -8,6 +8,26 @@
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
+ *
+ *
+ * Some notes why imx-pcm-fiq is used instead of DMA on some boards:
+ *
+ * The i.MX SSI core has some nasty limitations in AC97 mode. While most
+ * sane processor vendors have a FIFO per AC97 slot, the i.MX has only
+ * one FIFO which combines all valid receive slots. We cannot even select
+ * which slots we want to receive. The WM9712 with which this driver
+ * was developed with always sends GPIO status data in slot 12 which
+ * we receive in our (PCM-) data stream. The only chance we have is to
+ * manually skip this data in the FIQ handler. With sampling rates different
+ * from 48000Hz not every frame has valid receive data, so the ratio
+ * between pcm data and GPIO status data changes. Our FIQ handler is not
+ * able to handle this, hence this driver only works with 48000Hz sampling
+ * rate.
+ * Reading and writing AC97 registers is another challenge. The core
+ * provides us status bits when the read register is updated with *another*
+ * value. When we read the same register two times (and the register still
+ * contains the same value) these status bits are not set. We work
+ * around this by not polling these bits but only wait a fixed delay.
*/
#include <linux/init.h>
@@ -121,12 +141,14 @@ struct fsl_ssi_private {
bool new_binding;
bool ssi_on_imx;
+ bool use_dma;
struct clk *clk;
struct platform_device *imx_pcm_pdev;
struct snd_dmaengine_dai_dma_data dma_params_tx;
struct snd_dmaengine_dai_dma_data dma_params_rx;
struct imx_dma_data filter_data_tx;
struct imx_dma_data filter_data_rx;
+ struct imx_pcm_fiq_params fiq_params;
struct {
unsigned int rfrc;
@@ -356,7 +378,12 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
*/
/* Enable the interrupts and DMA requests */
- write_ssi(SIER_FLAGS, &ssi->sier);
+ if (ssi_private->use_dma)
+ write_ssi(SIER_FLAGS, &ssi->sier);
+ else
+ write_ssi(CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TFE0_EN |
+ CCSR_SSI_SIER_RIE |
+ CCSR_SSI_SIER_RFF0_EN, &ssi->sier);
/*
* Set the watermark for transmit FIFI 0 and receive FIFO 0. We
@@ -550,7 +577,7 @@ static int fsl_ssi_dai_probe(struct snd_soc_dai *dai)
{
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(dai);
- if (ssi_private->ssi_on_imx) {
+ if (ssi_private->ssi_on_imx && ssi_private->use_dma) {
dai->playback_dma_data = &ssi_private->dma_params_tx;
dai->capture_dma_data = &ssi_private->dma_params_rx;
}
@@ -695,6 +722,8 @@ static int fsl_ssi_probe(struct platform_device *pdev)
sizeof(fsl_ssi_dai_template));
ssi_private->cpu_dai_drv.name = ssi_private->name;
+ ssi_private->use_dma = !of_property_read_bool(np, "fsl,imx-fiq");
+
/* Get the addresses and IRQ */
ret = of_address_to_resource(np, 0, &res);
if (ret) {
@@ -716,12 +745,15 @@ static int fsl_ssi_probe(struct platform_device *pdev)
goto error_iomap;
}
- /* The 'name' should not have any slashes in it. */
- ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0, ssi_private->name,
- ssi_private);
- if (ret < 0) {
- dev_err(&pdev->dev, "could not claim irq %u\n", ssi_private->irq);
- goto error_irqmap;
+ if (ssi_private->use_dma) {
+ /* The 'name' should not have any slashes in it. */
+ ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0,
+ ssi_private->name, ssi_private);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not claim irq %u\n",
+ ssi_private->irq);
+ goto error_irqmap;
+ }
}
/* Are the RX and the TX clocks locked? */
@@ -770,7 +802,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
*/
ret = of_property_read_u32_array(pdev->dev.of_node,
"fsl,ssi-dma-events", dma_events, 2);
- if (ret) {
+ if (ret && !ssi_private->use_dma) {
dev_err(&pdev->dev, "could not get dma events\n");
goto error_clk;
}
@@ -809,12 +841,46 @@ static int fsl_ssi_probe(struct platform_device *pdev)
}
if (ssi_private->ssi_on_imx) {
- ssi_private->imx_pcm_pdev =
- platform_device_register_simple("imx-pcm-audio",
+ if (!ssi_private->use_dma) {
+
+ /*
+ * Some boards use an incompatible codec. To get it
+ * working, we are using imx-fiq-pcm-audio, that
+ * can handle those codecs. DMA is not possible in this
+ * situation.
+ */
+
+ ssi_private->imx_pcm_pdev = platform_device_alloc(
+ "imx-fiq-pcm-audio",
+ pdev->id);
+ if (!ssi_private->imx_pcm_pdev) {
+ ret = -ENOMEM;
+ goto error_dev;
+ }
+
+ ssi_private->fiq_params.irq = ssi_private->irq;
+ ssi_private->fiq_params.base = ssi_private->ssi;
+ ssi_private->fiq_params.dma_params_rx =
+ &ssi_private->dma_params_rx;
+ ssi_private->fiq_params.dma_params_tx =
+ &ssi_private->dma_params_tx;
+
+ platform_set_drvdata(ssi_private->imx_pcm_pdev,
+ &ssi_private->fiq_params);
+ ret = platform_device_add(ssi_private->imx_pcm_pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add imx-fiq-pcm-audio device\n");
+ platform_device_put(ssi_private->imx_pcm_pdev);
+ goto error_dev;
+ }
+ } else {
+ ssi_private->imx_pcm_pdev =
+ platform_device_register_simple("imx-pcm-audio",
-1, NULL, 0);
- if (IS_ERR(ssi_private->imx_pcm_pdev)) {
- ret = PTR_ERR(ssi_private->imx_pcm_pdev);
- goto error_dev;
+ if (IS_ERR(ssi_private->imx_pcm_pdev)) {
+ ret = PTR_ERR(ssi_private->imx_pcm_pdev);
+ goto error_dev;
+ }
}
}
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 04/10] ASoC: fsl-ssi: Add support for imx-pcm-fiq
@ 2013-04-18 12:33 ` Markus Pargmann
0 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel
Add support for non-dma pcm for imx platforms with imx-pcm-fiq support.
Instead of imx-pcm-audio, in this case imx-pcm-fiq-audio device is added
and the SIER flags are set differently.
We need imx-pcm-fiq for some boards that use an incompatible codec.
imx-pcm-fiq handles those codecs differently and allows to operate with
them. DMA is not possible because some data sent by the codecs, e.g.
wm9712, is not in the datastream. Also some data is mixed up in the
fifos, so that we need to sort them out manually.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
Notes:
Changes in v4:
- Add a comment about the reason why we add a imx-pcm-fiq device.
- Change commit message to include information about the usage of imx-pcm-fiq
Changes in v3:
- Rename bool "dma" to "use_dma"
sound/soc/fsl/fsl_ssi.c | 94 +++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 80 insertions(+), 14 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 0f0bed6..5165d41 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -8,6 +8,26 @@
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
+ *
+ *
+ * Some notes why imx-pcm-fiq is used instead of DMA on some boards:
+ *
+ * The i.MX SSI core has some nasty limitations in AC97 mode. While most
+ * sane processor vendors have a FIFO per AC97 slot, the i.MX has only
+ * one FIFO which combines all valid receive slots. We cannot even select
+ * which slots we want to receive. The WM9712 with which this driver
+ * was developed with always sends GPIO status data in slot 12 which
+ * we receive in our (PCM-) data stream. The only chance we have is to
+ * manually skip this data in the FIQ handler. With sampling rates different
+ * from 48000Hz not every frame has valid receive data, so the ratio
+ * between pcm data and GPIO status data changes. Our FIQ handler is not
+ * able to handle this, hence this driver only works with 48000Hz sampling
+ * rate.
+ * Reading and writing AC97 registers is another challenge. The core
+ * provides us status bits when the read register is updated with *another*
+ * value. When we read the same register two times (and the register still
+ * contains the same value) these status bits are not set. We work
+ * around this by not polling these bits but only wait a fixed delay.
*/
#include <linux/init.h>
@@ -121,12 +141,14 @@ struct fsl_ssi_private {
bool new_binding;
bool ssi_on_imx;
+ bool use_dma;
struct clk *clk;
struct platform_device *imx_pcm_pdev;
struct snd_dmaengine_dai_dma_data dma_params_tx;
struct snd_dmaengine_dai_dma_data dma_params_rx;
struct imx_dma_data filter_data_tx;
struct imx_dma_data filter_data_rx;
+ struct imx_pcm_fiq_params fiq_params;
struct {
unsigned int rfrc;
@@ -356,7 +378,12 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
*/
/* Enable the interrupts and DMA requests */
- write_ssi(SIER_FLAGS, &ssi->sier);
+ if (ssi_private->use_dma)
+ write_ssi(SIER_FLAGS, &ssi->sier);
+ else
+ write_ssi(CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TFE0_EN |
+ CCSR_SSI_SIER_RIE |
+ CCSR_SSI_SIER_RFF0_EN, &ssi->sier);
/*
* Set the watermark for transmit FIFI 0 and receive FIFO 0. We
@@ -550,7 +577,7 @@ static int fsl_ssi_dai_probe(struct snd_soc_dai *dai)
{
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(dai);
- if (ssi_private->ssi_on_imx) {
+ if (ssi_private->ssi_on_imx && ssi_private->use_dma) {
dai->playback_dma_data = &ssi_private->dma_params_tx;
dai->capture_dma_data = &ssi_private->dma_params_rx;
}
@@ -695,6 +722,8 @@ static int fsl_ssi_probe(struct platform_device *pdev)
sizeof(fsl_ssi_dai_template));
ssi_private->cpu_dai_drv.name = ssi_private->name;
+ ssi_private->use_dma = !of_property_read_bool(np, "fsl,imx-fiq");
+
/* Get the addresses and IRQ */
ret = of_address_to_resource(np, 0, &res);
if (ret) {
@@ -716,12 +745,15 @@ static int fsl_ssi_probe(struct platform_device *pdev)
goto error_iomap;
}
- /* The 'name' should not have any slashes in it. */
- ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0, ssi_private->name,
- ssi_private);
- if (ret < 0) {
- dev_err(&pdev->dev, "could not claim irq %u\n", ssi_private->irq);
- goto error_irqmap;
+ if (ssi_private->use_dma) {
+ /* The 'name' should not have any slashes in it. */
+ ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0,
+ ssi_private->name, ssi_private);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not claim irq %u\n",
+ ssi_private->irq);
+ goto error_irqmap;
+ }
}
/* Are the RX and the TX clocks locked? */
@@ -770,7 +802,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
*/
ret = of_property_read_u32_array(pdev->dev.of_node,
"fsl,ssi-dma-events", dma_events, 2);
- if (ret) {
+ if (ret && !ssi_private->use_dma) {
dev_err(&pdev->dev, "could not get dma events\n");
goto error_clk;
}
@@ -809,12 +841,46 @@ static int fsl_ssi_probe(struct platform_device *pdev)
}
if (ssi_private->ssi_on_imx) {
- ssi_private->imx_pcm_pdev =
- platform_device_register_simple("imx-pcm-audio",
+ if (!ssi_private->use_dma) {
+
+ /*
+ * Some boards use an incompatible codec. To get it
+ * working, we are using imx-fiq-pcm-audio, that
+ * can handle those codecs. DMA is not possible in this
+ * situation.
+ */
+
+ ssi_private->imx_pcm_pdev = platform_device_alloc(
+ "imx-fiq-pcm-audio",
+ pdev->id);
+ if (!ssi_private->imx_pcm_pdev) {
+ ret = -ENOMEM;
+ goto error_dev;
+ }
+
+ ssi_private->fiq_params.irq = ssi_private->irq;
+ ssi_private->fiq_params.base = ssi_private->ssi;
+ ssi_private->fiq_params.dma_params_rx =
+ &ssi_private->dma_params_rx;
+ ssi_private->fiq_params.dma_params_tx =
+ &ssi_private->dma_params_tx;
+
+ platform_set_drvdata(ssi_private->imx_pcm_pdev,
+ &ssi_private->fiq_params);
+ ret = platform_device_add(ssi_private->imx_pcm_pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add imx-fiq-pcm-audio device\n");
+ platform_device_put(ssi_private->imx_pcm_pdev);
+ goto error_dev;
+ }
+ } else {
+ ssi_private->imx_pcm_pdev =
+ platform_device_register_simple("imx-pcm-audio",
-1, NULL, 0);
- if (IS_ERR(ssi_private->imx_pcm_pdev)) {
- ret = PTR_ERR(ssi_private->imx_pcm_pdev);
- goto error_dev;
+ if (IS_ERR(ssi_private->imx_pcm_pdev)) {
+ ret = PTR_ERR(ssi_private->imx_pcm_pdev);
+ goto error_dev;
+ }
}
}
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 06/10] ARM: imx: Export ac97 reset functions
2013-04-18 12:33 ` Markus Pargmann
@ 2013-04-18 12:33 ` Markus Pargmann
-1 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Fabio Estevam, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
Lars-Peter Clausen, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
Mark Brown, Timur Tabi, Liam Girdwood, Sascha Hauer
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/mach-imx/mach-pca100.c | 7 +++++--
arch/arm/mach-imx/mach-pcm043.c | 7 +++++--
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index b8b15bb..68badf8 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -22,6 +22,7 @@
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/irq.h>
@@ -208,7 +209,7 @@ static const struct spi_imx_master pca100_spi0_data __initconst = {
.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
};
-static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
gpio_set_value(GPIO_PORTC + 20, 1);
@@ -217,8 +218,9 @@ static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
mxc_gpio_mode(PC20_PF_SSI1_FS);
msleep(2);
}
+EXPORT_SYMBOL(pca100_ac97_warm_reset);
-static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
gpio_set_value(GPIO_PORTC + 20, 0);
@@ -232,6 +234,7 @@ static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
mxc_gpio_mode(PC22_PF_SSI1_TXD);
msleep(2);
}
+EXPORT_SYMBOL(pca100_ac97_cold_reset);
static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
.ac97_reset = pca100_ac97_cold_reset,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 8ed533f..4f318ca 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -27,6 +27,7 @@
#include <linux/i2c/at24.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
+#include <linux/export.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -217,7 +218,7 @@ static iomux_v3_cfg_t pcm043_pads[] = {
#define SD1_GPIO_WP IMX_GPIO_NR(2, 23)
#define SD1_GPIO_CD IMX_GPIO_NR(2, 24)
-static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
+void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
{
iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
@@ -239,8 +240,9 @@ static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
gpio_free(AC97_GPIO_TXFS);
mxc_iomux_v3_setup_pad(txfs);
}
+EXPORT_SYMBOL(pcm043_ac97_warm_reset);
-static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
+void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
{
iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
@@ -286,6 +288,7 @@ err1:
printk("%s failed with %d\n", __func__, ret);
mdelay(1);
}
+EXPORT_SYMBOL(pcm043_ac97_cold_reset);
static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
.ac97_reset = pcm043_ac97_cold_reset,
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 06/10] ARM: imx: Export ac97 reset functions
@ 2013-04-18 12:33 ` Markus Pargmann
0 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
arch/arm/mach-imx/mach-pca100.c | 7 +++++--
arch/arm/mach-imx/mach-pcm043.c | 7 +++++--
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index b8b15bb..68badf8 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -22,6 +22,7 @@
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/irq.h>
@@ -208,7 +209,7 @@ static const struct spi_imx_master pca100_spi0_data __initconst = {
.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
};
-static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
gpio_set_value(GPIO_PORTC + 20, 1);
@@ -217,8 +218,9 @@ static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
mxc_gpio_mode(PC20_PF_SSI1_FS);
msleep(2);
}
+EXPORT_SYMBOL(pca100_ac97_warm_reset);
-static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
gpio_set_value(GPIO_PORTC + 20, 0);
@@ -232,6 +234,7 @@ static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
mxc_gpio_mode(PC22_PF_SSI1_TXD);
msleep(2);
}
+EXPORT_SYMBOL(pca100_ac97_cold_reset);
static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
.ac97_reset = pca100_ac97_cold_reset,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 8ed533f..4f318ca 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -27,6 +27,7 @@
#include <linux/i2c/at24.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
+#include <linux/export.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -217,7 +218,7 @@ static iomux_v3_cfg_t pcm043_pads[] = {
#define SD1_GPIO_WP IMX_GPIO_NR(2, 23)
#define SD1_GPIO_CD IMX_GPIO_NR(2, 24)
-static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
+void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
{
iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
@@ -239,8 +240,9 @@ static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
gpio_free(AC97_GPIO_TXFS);
mxc_iomux_v3_setup_pad(txfs);
}
+EXPORT_SYMBOL(pcm043_ac97_warm_reset);
-static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
+void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
{
iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
@@ -286,6 +288,7 @@ err1:
printk("%s failed with %d\n", __func__, ret);
mdelay(1);
}
+EXPORT_SYMBOL(pcm043_ac97_cold_reset);
static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
.ac97_reset = pcm043_ac97_cold_reset,
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 07/10] ASoC: fsl-ssi: imx ac97 support
2013-04-18 12:33 ` Markus Pargmann
@ 2013-04-18 12:33 ` Markus Pargmann
-1 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Fabio Estevam, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
Lars-Peter Clausen, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
Mark Brown, Timur Tabi, Liam Girdwood, Sascha Hauer
This patch copies some parts from imx-ssi to support AC97 on
imx27-pca100 and imx27-pcm043. This is a implementation of the
ac97-slave mode.
For ac97, the registers have to be setup earlier than for other ssi
modes because there is some communication with the external device
before actual streaming. So this patch introduces a fsl_ssi_setup
function to setup the registers at different times.
This patch was tested with imx27-pca100.
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
Notes:
Changes in v3:
- Cleanup ac97 code by adding a fsl_ssi_setup function for initial register
setup. For ac97 the registers have to be setup earlier than in normal
mode.
sound/soc/fsl/fsl_ssi.c | 412 +++++++++++++++++++++++++++++++++++++++---------
1 file changed, 340 insertions(+), 72 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index d2afda1..5cb7533 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -141,6 +141,7 @@ struct fsl_ssi_private {
bool new_binding;
bool ssi_on_imx;
+ bool imx_ac97;
bool use_dma;
struct clk *clk;
struct platform_device *imx_pcm_pdev;
@@ -150,6 +151,9 @@ struct fsl_ssi_private {
struct imx_dma_data filter_data_rx;
struct imx_pcm_fiq_params fiq_params;
+ void (*ac97_reset) (struct snd_ac97 *ac97);
+ void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+
struct {
unsigned int rfrc;
unsigned int tfrc;
@@ -321,6 +325,124 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
return ret;
}
+static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private)
+{
+ struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+ u8 i2s_mode;
+ u8 wm;
+ int synchronous = ssi_private->cpu_dai_drv.symmetric_rates;
+
+ if (ssi_private->imx_ac97)
+ i2s_mode = CCSR_SSI_SCR_I2S_MODE_NORMAL | CCSR_SSI_SCR_NET;
+ else
+ i2s_mode = CCSR_SSI_SCR_I2S_MODE_SLAVE;
+
+ /*
+ * Section 16.5 of the MPC8610 reference manual says that the SSI needs
+ * to be disabled before updating the registers we set here.
+ */
+ write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
+
+ /*
+ * Program the SSI into I2S Slave Non-Network Synchronous mode. Also
+ * enable the transmit and receive FIFO.
+ *
+ * FIXME: Little-endian samples require a different shift dir
+ */
+ write_ssi_mask(&ssi->scr,
+ CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN,
+ CCSR_SSI_SCR_TFR_CLK_DIS |
+ i2s_mode |
+ (synchronous ? CCSR_SSI_SCR_SYN : 0));
+
+ write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
+ CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS |
+ CCSR_SSI_STCR_TSCKP, &ssi->stcr);
+
+ write_ssi(CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 |
+ CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS |
+ CCSR_SSI_SRCR_RSCKP, &ssi->srcr);
+ /*
+ * The DC and PM bits are only used if the SSI is the clock master.
+ */
+
+ /*
+ * Set the watermark for transmit FIFI 0 and receive FIFO 0. We don't
+ * use FIFO 1. We program the transmit water to signal a DMA transfer
+ * if there are only two (or fewer) elements left in the FIFO. Two
+ * elements equals one frame (left channel, right channel). This value,
+ * however, depends on the depth of the transmit buffer.
+ *
+ * We set the watermark on the same level as the DMA burstsize. For
+ * fiq it is probably better to use the biggest possible watermark
+ * size.
+ */
+ if (ssi_private->use_dma)
+ wm = ssi_private->fifo_depth - 2;
+ else
+ wm = ssi_private->fifo_depth;
+
+ write_ssi(CCSR_SSI_SFCSR_TFWM0(wm) | CCSR_SSI_SFCSR_RFWM0(wm) |
+ CCSR_SSI_SFCSR_TFWM1(wm) | CCSR_SSI_SFCSR_RFWM1(wm),
+ &ssi->sfcsr);
+
+ /*
+ * For non-ac97 setups, we keep the SSI disabled because if we enable
+ * it, then the DMA controller will start. It's not supposed to start
+ * until the SCR.TE (or SCR.RE) bit is set, but it does anyway. The DMA
+ * controller will transfer one "BWC" of data (i.e. the amount of data
+ * that the MR.BWC bits are set to). The reason this is bad is because
+ * at this point, the PCM driver has not finished initializing the DMA
+ * controller.
+ */
+
+
+ /*
+ * For ac97 interrupts are enabled with the startup of the substream
+ * because it is also running without an active substream. Normally SSI
+ * is only enabled when there is a substream.
+ */
+ if (!ssi_private->imx_ac97) {
+ /* Enable the interrupts and DMA requests */
+ if (ssi_private->use_dma)
+ write_ssi(SIER_FLAGS, &ssi->sier);
+ else
+ write_ssi(CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TFE0_EN |
+ CCSR_SSI_SIER_RIE |
+ CCSR_SSI_SIER_RFF0_EN, &ssi->sier);
+ } else {
+ /*
+ * Setup the clock control register
+ */
+ write_ssi(CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13),
+ &ssi->stccr);
+ write_ssi(CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13),
+ &ssi->srccr);
+
+ /*
+ * Enable AC97 mode and startup the SSI
+ */
+ write_ssi(CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV,
+ &ssi->sacnt);
+ write_ssi(0xff, &ssi->saccdis);
+ write_ssi(0x300, &ssi->saccen);
+
+ /*
+ * Enable SSI
+ */
+ write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_SSIEN);
+ write_ssi(CCSR_SSI_SOR_WAIT(3), &ssi->sor);
+
+ /*
+ * Enable Transmit and Receive
+ */
+ write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE);
+ }
+
+ return 0;
+}
+
+
/**
* fsl_ssi_startup: create a new substream
*
@@ -342,75 +464,14 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
* and initialize the SSI registers.
*/
if (!ssi_private->first_stream) {
- struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
-
ssi_private->first_stream = substream;
/*
- * Section 16.5 of the MPC8610 reference manual says that the
- * SSI needs to be disabled before updating the registers we set
- * here.
- */
- write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
-
- /*
- * Program the SSI into I2S Slave Non-Network Synchronous mode.
- * Also enable the transmit and receive FIFO.
- *
- * FIXME: Little-endian samples require a different shift dir
- */
- write_ssi_mask(&ssi->scr,
- CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN,
- CCSR_SSI_SCR_TFR_CLK_DIS | CCSR_SSI_SCR_I2S_MODE_SLAVE
- | (synchronous ? CCSR_SSI_SCR_SYN : 0));
-
- write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
- CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS |
- CCSR_SSI_STCR_TSCKP, &ssi->stcr);
-
- write_ssi(CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 |
- CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS |
- CCSR_SSI_SRCR_RSCKP, &ssi->srcr);
-
- /*
- * The DC and PM bits are only used if the SSI is the clock
- * master.
- */
-
- /* Enable the interrupts and DMA requests */
- if (ssi_private->use_dma)
- write_ssi(SIER_FLAGS, &ssi->sier);
- else
- write_ssi(CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TFE0_EN |
- CCSR_SSI_SIER_RIE |
- CCSR_SSI_SIER_RFF0_EN, &ssi->sier);
-
- /*
- * Set the watermark for transmit FIFI 0 and receive FIFO 0. We
- * don't use FIFO 1. We program the transmit water to signal a
- * DMA transfer if there are only two (or fewer) elements left
- * in the FIFO. Two elements equals one frame (left channel,
- * right channel). This value, however, depends on the depth of
- * the transmit buffer.
- *
- * We program the receive FIFO to notify us if at least two
- * elements (one frame) have been written to the FIFO. We could
- * make this value larger (and maybe we should), but this way
- * data will be written to memory as soon as it's available.
- */
- write_ssi(CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) |
- CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2),
- &ssi->sfcsr);
-
- /*
- * We keep the SSI disabled because if we enable it, then the
- * DMA controller will start. It's not supposed to start until
- * the SCR.TE (or SCR.RE) bit is set, but it does anyway. The
- * DMA controller will transfer one "BWC" of data (i.e. the
- * amount of data that the MR.BWC bits are set to). The reason
- * this is bad is because at this point, the PCM driver has not
- * finished initializing the DMA controller.
+ * fsl_ssi_setup was already called by ac97_init earlier if
+ * the driver is in ac97 mode.
*/
+ if (!ssi_private->imx_ac97)
+ fsl_ssi_setup(ssi_private);
} else {
if (synchronous) {
struct snd_pcm_runtime *first_runtime =
@@ -565,8 +626,9 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
/*
* If this is the last active substream, disable the SSI.
+ * If AC97 is active, we don't want to disable SSI.
*/
- if (!ssi_private->first_stream) {
+ if (!ssi_private->first_stream && !ssi_private->imx_ac97) {
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
@@ -615,6 +677,176 @@ static const struct snd_soc_component_driver fsl_ssi_component = {
.name = "fsl-ssi",
};
+/**
+ * fsl_ssi_ac97_trigger: start and stop the AC97 receive/transmit.
+ *
+ * This function is called by ALSA to start, stop, pause, and resume the
+ * transfer of data.
+ */
+static int fsl_ssi_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+ struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ write_ssi_mask(&ssi->sier, 0, CCSR_SSI_SIER_TIE |
+ CCSR_SSI_SIER_TFE0_EN);
+ else
+ write_ssi_mask(&ssi->sier, 0, CCSR_SSI_SIER_RIE |
+ CCSR_SSI_SIER_RFF0_EN);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ write_ssi_mask(&ssi->sier, CCSR_SSI_SIER_TIE |
+ CCSR_SSI_SIER_TFE0_EN, 0);
+ else
+ write_ssi_mask(&ssi->sier, CCSR_SSI_SIER_RIE |
+ CCSR_SSI_SIER_RFF0_EN, 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ write_ssi(CCSR_SSI_SOR_TX_CLR, &ssi->sor);
+ else
+ write_ssi(CCSR_SSI_SOR_RX_CLR, &ssi->sor);
+
+ return 0;
+}
+
+static const struct snd_soc_dai_ops fsl_ssi_ac97_dai_ops = {
+ .startup = fsl_ssi_startup,
+ .shutdown = fsl_ssi_shutdown,
+ .trigger = fsl_ssi_ac97_trigger,
+};
+
+static struct snd_soc_dai_driver fsl_ssi_ac97_dai = {
+ .ac97_control = 1,
+ .playback = {
+ .stream_name = "AC97 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .capture = {
+ .stream_name = "AC97 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &fsl_ssi_ac97_dai_ops,
+};
+
+
+static struct fsl_ssi_private *fsl_ac97_data;
+
+static void fsl_ssi_ac97_init(void)
+{
+ fsl_ssi_setup(fsl_ac97_data);
+}
+
+static void fsl_ssi_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+ unsigned short val)
+{
+ struct ccsr_ssi *ssi = fsl_ac97_data->ssi;
+ unsigned int lreg;
+ unsigned int lval;
+
+ if (reg > 0x7f)
+ return;
+
+
+ lreg = reg << 12;
+ write_ssi(lreg, &ssi->sacadd);
+
+ lval = val << 4;
+ write_ssi(lval , &ssi->sacdat);
+
+ write_ssi_mask(&ssi->sacnt, CCSR_SSI_SACNT_RDWR_MASK,
+ CCSR_SSI_SACNT_WR);
+ udelay(100);
+}
+
+static unsigned short fsl_ssi_ac97_read(struct snd_ac97 *ac97,
+ unsigned short reg)
+{
+ struct ccsr_ssi *ssi = fsl_ac97_data->ssi;
+
+ unsigned short val = -1;
+ unsigned int lreg;
+
+ lreg = (reg & 0x7f) << 12 ;
+ write_ssi(lreg, &ssi->sacadd);
+ write_ssi_mask(&ssi->sacnt, CCSR_SSI_SACNT_RDWR_MASK,
+ CCSR_SSI_SACNT_RD);
+
+ udelay(100);
+
+ val = (read_ssi(&ssi->sacdat) >> 4) & 0xffff;
+
+ return val;
+}
+
+static void fsl_ssi_ac97_reset(struct snd_ac97 *ac97)
+{
+ struct fsl_ssi_private *ssi_private = fsl_ac97_data;
+
+ if (ssi_private->ac97_reset)
+ ssi_private->ac97_reset(ac97);
+ /* First read sometimes fails, do a dummy read */
+ fsl_ssi_ac97_read(ac97, 0);
+}
+
+static void fsl_ssi_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ struct fsl_ssi_private *ssi_private = fsl_ac97_data;
+
+ if (ssi_private->ac97_warm_reset)
+ ssi_private->ac97_warm_reset(ac97);
+
+ /* First read sometimes fails, do a dummy read */
+ fsl_ssi_ac97_read(ac97, 0);
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+ .read = fsl_ssi_ac97_read,
+ .write = fsl_ssi_ac97_write,
+ .reset = fsl_ssi_ac97_reset,
+ .warm_reset = fsl_ssi_ac97_warm_reset
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+/*
+ * Pointer to AC97 reset functions for specific boards
+ */
+#if IS_ENABLED(CONFIG_MACH_PCA100)
+extern void pca100_ac97_cold_reset(struct snd_ac97 *ac97);
+extern void pca100_ac97_warm_reset(struct snd_ac97 *ac97);
+#else
+void pca100_ac97_cold_reset(struct snd_ac97 *ac97) { }
+void pca100_ac97_warm_reset(struct snd_ac97 *ac97) { }
+#endif
+
+#if IS_ENABLED(CONFIG_MACH_PCM043)
+extern void pcm043_ac97_cold_reset(struct snd_ac97 *ac97);
+extern void pcm043_ac97_warm_reset(struct snd_ac97 *ac97);
+#else
+void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) { }
+void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) { }
+#endif
+
+
/* Show the statistics of a flag only if its interrupt is enabled. The
* compiler will optimze this code to a no-op if the interrupt is not
* enabled.
@@ -691,6 +923,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
struct resource res;
char name[64];
bool shared;
+ bool ac97 = false;
/* SSIs that are not connected on the board should have a
* status = "disabled"
@@ -701,7 +934,13 @@ static int fsl_ssi_probe(struct platform_device *pdev)
/* We only support the SSI in "I2S Slave" mode */
sprop = of_get_property(np, "fsl,mode", NULL);
- if (!sprop || strcmp(sprop, "i2s-slave")) {
+ if (!sprop) {
+ dev_err(&pdev->dev, "fsl,mode property is necessary\n");
+ return -EINVAL;
+ }
+ if (!strcmp(sprop, "ac97-slave")) {
+ ac97 = true;
+ } else if (strcmp(sprop, "i2s-slave")) {
dev_notice(&pdev->dev, "mode %s is unsupported\n", sprop);
return -ENODEV;
}
@@ -717,13 +956,39 @@ static int fsl_ssi_probe(struct platform_device *pdev)
strcpy(ssi_private->name, p);
- /* Initialize this copy of the CPU DAI driver structure */
- memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_dai_template,
- sizeof(fsl_ssi_dai_template));
- ssi_private->cpu_dai_drv.name = ssi_private->name;
-
ssi_private->use_dma = !of_property_read_bool(np, "fsl,imx-fiq");
+ if (ac97) {
+ sprop = of_get_property(of_find_node_by_path("/"), "compatible",
+ NULL);
+ p = strrchr(sprop, ',');
+ if (p)
+ sprop = p + 1;
+
+ if (!strcmp(sprop, "imx27-pca100")) {
+ ssi_private->ac97_reset = pca100_ac97_cold_reset;
+ ssi_private->ac97_warm_reset = pca100_ac97_warm_reset;
+ } else if (!strcmp(sprop, "imx27-pcm043")) {
+ ssi_private->ac97_reset = pcm043_ac97_cold_reset;
+ ssi_private->ac97_warm_reset = pcm043_ac97_warm_reset;
+ } else {
+ dev_err(&pdev->dev, "Failed to enable ssi AC97 mode, unknown board.\n");
+ ret = -EINVAL;
+ goto error_kmalloc;
+ }
+
+ memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_ac97_dai,
+ sizeof(fsl_ssi_ac97_dai));
+
+ fsl_ac97_data = ssi_private;
+ ssi_private->imx_ac97 = true;
+ } else {
+ /* Initialize this copy of the CPU DAI driver structure */
+ memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_dai_template,
+ sizeof(fsl_ssi_dai_template));
+ }
+ ssi_private->cpu_dai_drv.name = ssi_private->name;
+
/* Get the addresses and IRQ */
ret = of_address_to_resource(np, 0, &res);
if (ret) {
@@ -922,6 +1187,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
}
done:
+ if (ssi_private->imx_ac97)
+ fsl_ssi_ac97_init();
+
return 0;
error_dai:
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 07/10] ASoC: fsl-ssi: imx ac97 support
@ 2013-04-18 12:33 ` Markus Pargmann
0 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel
This patch copies some parts from imx-ssi to support AC97 on
imx27-pca100 and imx27-pcm043. This is a implementation of the
ac97-slave mode.
For ac97, the registers have to be setup earlier than for other ssi
modes because there is some communication with the external device
before actual streaming. So this patch introduces a fsl_ssi_setup
function to setup the registers at different times.
This patch was tested with imx27-pca100.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
Notes:
Changes in v3:
- Cleanup ac97 code by adding a fsl_ssi_setup function for initial register
setup. For ac97 the registers have to be setup earlier than in normal
mode.
sound/soc/fsl/fsl_ssi.c | 412 +++++++++++++++++++++++++++++++++++++++---------
1 file changed, 340 insertions(+), 72 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index d2afda1..5cb7533 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -141,6 +141,7 @@ struct fsl_ssi_private {
bool new_binding;
bool ssi_on_imx;
+ bool imx_ac97;
bool use_dma;
struct clk *clk;
struct platform_device *imx_pcm_pdev;
@@ -150,6 +151,9 @@ struct fsl_ssi_private {
struct imx_dma_data filter_data_rx;
struct imx_pcm_fiq_params fiq_params;
+ void (*ac97_reset) (struct snd_ac97 *ac97);
+ void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+
struct {
unsigned int rfrc;
unsigned int tfrc;
@@ -321,6 +325,124 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
return ret;
}
+static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private)
+{
+ struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+ u8 i2s_mode;
+ u8 wm;
+ int synchronous = ssi_private->cpu_dai_drv.symmetric_rates;
+
+ if (ssi_private->imx_ac97)
+ i2s_mode = CCSR_SSI_SCR_I2S_MODE_NORMAL | CCSR_SSI_SCR_NET;
+ else
+ i2s_mode = CCSR_SSI_SCR_I2S_MODE_SLAVE;
+
+ /*
+ * Section 16.5 of the MPC8610 reference manual says that the SSI needs
+ * to be disabled before updating the registers we set here.
+ */
+ write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
+
+ /*
+ * Program the SSI into I2S Slave Non-Network Synchronous mode. Also
+ * enable the transmit and receive FIFO.
+ *
+ * FIXME: Little-endian samples require a different shift dir
+ */
+ write_ssi_mask(&ssi->scr,
+ CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN,
+ CCSR_SSI_SCR_TFR_CLK_DIS |
+ i2s_mode |
+ (synchronous ? CCSR_SSI_SCR_SYN : 0));
+
+ write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
+ CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS |
+ CCSR_SSI_STCR_TSCKP, &ssi->stcr);
+
+ write_ssi(CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 |
+ CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS |
+ CCSR_SSI_SRCR_RSCKP, &ssi->srcr);
+ /*
+ * The DC and PM bits are only used if the SSI is the clock master.
+ */
+
+ /*
+ * Set the watermark for transmit FIFI 0 and receive FIFO 0. We don't
+ * use FIFO 1. We program the transmit water to signal a DMA transfer
+ * if there are only two (or fewer) elements left in the FIFO. Two
+ * elements equals one frame (left channel, right channel). This value,
+ * however, depends on the depth of the transmit buffer.
+ *
+ * We set the watermark on the same level as the DMA burstsize. For
+ * fiq it is probably better to use the biggest possible watermark
+ * size.
+ */
+ if (ssi_private->use_dma)
+ wm = ssi_private->fifo_depth - 2;
+ else
+ wm = ssi_private->fifo_depth;
+
+ write_ssi(CCSR_SSI_SFCSR_TFWM0(wm) | CCSR_SSI_SFCSR_RFWM0(wm) |
+ CCSR_SSI_SFCSR_TFWM1(wm) | CCSR_SSI_SFCSR_RFWM1(wm),
+ &ssi->sfcsr);
+
+ /*
+ * For non-ac97 setups, we keep the SSI disabled because if we enable
+ * it, then the DMA controller will start. It's not supposed to start
+ * until the SCR.TE (or SCR.RE) bit is set, but it does anyway. The DMA
+ * controller will transfer one "BWC" of data (i.e. the amount of data
+ * that the MR.BWC bits are set to). The reason this is bad is because
+ * at this point, the PCM driver has not finished initializing the DMA
+ * controller.
+ */
+
+
+ /*
+ * For ac97 interrupts are enabled with the startup of the substream
+ * because it is also running without an active substream. Normally SSI
+ * is only enabled when there is a substream.
+ */
+ if (!ssi_private->imx_ac97) {
+ /* Enable the interrupts and DMA requests */
+ if (ssi_private->use_dma)
+ write_ssi(SIER_FLAGS, &ssi->sier);
+ else
+ write_ssi(CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TFE0_EN |
+ CCSR_SSI_SIER_RIE |
+ CCSR_SSI_SIER_RFF0_EN, &ssi->sier);
+ } else {
+ /*
+ * Setup the clock control register
+ */
+ write_ssi(CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13),
+ &ssi->stccr);
+ write_ssi(CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13),
+ &ssi->srccr);
+
+ /*
+ * Enable AC97 mode and startup the SSI
+ */
+ write_ssi(CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV,
+ &ssi->sacnt);
+ write_ssi(0xff, &ssi->saccdis);
+ write_ssi(0x300, &ssi->saccen);
+
+ /*
+ * Enable SSI
+ */
+ write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_SSIEN);
+ write_ssi(CCSR_SSI_SOR_WAIT(3), &ssi->sor);
+
+ /*
+ * Enable Transmit and Receive
+ */
+ write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE);
+ }
+
+ return 0;
+}
+
+
/**
* fsl_ssi_startup: create a new substream
*
@@ -342,75 +464,14 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
* and initialize the SSI registers.
*/
if (!ssi_private->first_stream) {
- struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
-
ssi_private->first_stream = substream;
/*
- * Section 16.5 of the MPC8610 reference manual says that the
- * SSI needs to be disabled before updating the registers we set
- * here.
- */
- write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
-
- /*
- * Program the SSI into I2S Slave Non-Network Synchronous mode.
- * Also enable the transmit and receive FIFO.
- *
- * FIXME: Little-endian samples require a different shift dir
- */
- write_ssi_mask(&ssi->scr,
- CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN,
- CCSR_SSI_SCR_TFR_CLK_DIS | CCSR_SSI_SCR_I2S_MODE_SLAVE
- | (synchronous ? CCSR_SSI_SCR_SYN : 0));
-
- write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
- CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS |
- CCSR_SSI_STCR_TSCKP, &ssi->stcr);
-
- write_ssi(CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 |
- CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS |
- CCSR_SSI_SRCR_RSCKP, &ssi->srcr);
-
- /*
- * The DC and PM bits are only used if the SSI is the clock
- * master.
- */
-
- /* Enable the interrupts and DMA requests */
- if (ssi_private->use_dma)
- write_ssi(SIER_FLAGS, &ssi->sier);
- else
- write_ssi(CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TFE0_EN |
- CCSR_SSI_SIER_RIE |
- CCSR_SSI_SIER_RFF0_EN, &ssi->sier);
-
- /*
- * Set the watermark for transmit FIFI 0 and receive FIFO 0. We
- * don't use FIFO 1. We program the transmit water to signal a
- * DMA transfer if there are only two (or fewer) elements left
- * in the FIFO. Two elements equals one frame (left channel,
- * right channel). This value, however, depends on the depth of
- * the transmit buffer.
- *
- * We program the receive FIFO to notify us if at least two
- * elements (one frame) have been written to the FIFO. We could
- * make this value larger (and maybe we should), but this way
- * data will be written to memory as soon as it's available.
- */
- write_ssi(CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) |
- CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2),
- &ssi->sfcsr);
-
- /*
- * We keep the SSI disabled because if we enable it, then the
- * DMA controller will start. It's not supposed to start until
- * the SCR.TE (or SCR.RE) bit is set, but it does anyway. The
- * DMA controller will transfer one "BWC" of data (i.e. the
- * amount of data that the MR.BWC bits are set to). The reason
- * this is bad is because at this point, the PCM driver has not
- * finished initializing the DMA controller.
+ * fsl_ssi_setup was already called by ac97_init earlier if
+ * the driver is in ac97 mode.
*/
+ if (!ssi_private->imx_ac97)
+ fsl_ssi_setup(ssi_private);
} else {
if (synchronous) {
struct snd_pcm_runtime *first_runtime =
@@ -565,8 +626,9 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
/*
* If this is the last active substream, disable the SSI.
+ * If AC97 is active, we don't want to disable SSI.
*/
- if (!ssi_private->first_stream) {
+ if (!ssi_private->first_stream && !ssi_private->imx_ac97) {
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
@@ -615,6 +677,176 @@ static const struct snd_soc_component_driver fsl_ssi_component = {
.name = "fsl-ssi",
};
+/**
+ * fsl_ssi_ac97_trigger: start and stop the AC97 receive/transmit.
+ *
+ * This function is called by ALSA to start, stop, pause, and resume the
+ * transfer of data.
+ */
+static int fsl_ssi_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+ struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ write_ssi_mask(&ssi->sier, 0, CCSR_SSI_SIER_TIE |
+ CCSR_SSI_SIER_TFE0_EN);
+ else
+ write_ssi_mask(&ssi->sier, 0, CCSR_SSI_SIER_RIE |
+ CCSR_SSI_SIER_RFF0_EN);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ write_ssi_mask(&ssi->sier, CCSR_SSI_SIER_TIE |
+ CCSR_SSI_SIER_TFE0_EN, 0);
+ else
+ write_ssi_mask(&ssi->sier, CCSR_SSI_SIER_RIE |
+ CCSR_SSI_SIER_RFF0_EN, 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ write_ssi(CCSR_SSI_SOR_TX_CLR, &ssi->sor);
+ else
+ write_ssi(CCSR_SSI_SOR_RX_CLR, &ssi->sor);
+
+ return 0;
+}
+
+static const struct snd_soc_dai_ops fsl_ssi_ac97_dai_ops = {
+ .startup = fsl_ssi_startup,
+ .shutdown = fsl_ssi_shutdown,
+ .trigger = fsl_ssi_ac97_trigger,
+};
+
+static struct snd_soc_dai_driver fsl_ssi_ac97_dai = {
+ .ac97_control = 1,
+ .playback = {
+ .stream_name = "AC97 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .capture = {
+ .stream_name = "AC97 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &fsl_ssi_ac97_dai_ops,
+};
+
+
+static struct fsl_ssi_private *fsl_ac97_data;
+
+static void fsl_ssi_ac97_init(void)
+{
+ fsl_ssi_setup(fsl_ac97_data);
+}
+
+static void fsl_ssi_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+ unsigned short val)
+{
+ struct ccsr_ssi *ssi = fsl_ac97_data->ssi;
+ unsigned int lreg;
+ unsigned int lval;
+
+ if (reg > 0x7f)
+ return;
+
+
+ lreg = reg << 12;
+ write_ssi(lreg, &ssi->sacadd);
+
+ lval = val << 4;
+ write_ssi(lval , &ssi->sacdat);
+
+ write_ssi_mask(&ssi->sacnt, CCSR_SSI_SACNT_RDWR_MASK,
+ CCSR_SSI_SACNT_WR);
+ udelay(100);
+}
+
+static unsigned short fsl_ssi_ac97_read(struct snd_ac97 *ac97,
+ unsigned short reg)
+{
+ struct ccsr_ssi *ssi = fsl_ac97_data->ssi;
+
+ unsigned short val = -1;
+ unsigned int lreg;
+
+ lreg = (reg & 0x7f) << 12 ;
+ write_ssi(lreg, &ssi->sacadd);
+ write_ssi_mask(&ssi->sacnt, CCSR_SSI_SACNT_RDWR_MASK,
+ CCSR_SSI_SACNT_RD);
+
+ udelay(100);
+
+ val = (read_ssi(&ssi->sacdat) >> 4) & 0xffff;
+
+ return val;
+}
+
+static void fsl_ssi_ac97_reset(struct snd_ac97 *ac97)
+{
+ struct fsl_ssi_private *ssi_private = fsl_ac97_data;
+
+ if (ssi_private->ac97_reset)
+ ssi_private->ac97_reset(ac97);
+ /* First read sometimes fails, do a dummy read */
+ fsl_ssi_ac97_read(ac97, 0);
+}
+
+static void fsl_ssi_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ struct fsl_ssi_private *ssi_private = fsl_ac97_data;
+
+ if (ssi_private->ac97_warm_reset)
+ ssi_private->ac97_warm_reset(ac97);
+
+ /* First read sometimes fails, do a dummy read */
+ fsl_ssi_ac97_read(ac97, 0);
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+ .read = fsl_ssi_ac97_read,
+ .write = fsl_ssi_ac97_write,
+ .reset = fsl_ssi_ac97_reset,
+ .warm_reset = fsl_ssi_ac97_warm_reset
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+/*
+ * Pointer to AC97 reset functions for specific boards
+ */
+#if IS_ENABLED(CONFIG_MACH_PCA100)
+extern void pca100_ac97_cold_reset(struct snd_ac97 *ac97);
+extern void pca100_ac97_warm_reset(struct snd_ac97 *ac97);
+#else
+void pca100_ac97_cold_reset(struct snd_ac97 *ac97) { }
+void pca100_ac97_warm_reset(struct snd_ac97 *ac97) { }
+#endif
+
+#if IS_ENABLED(CONFIG_MACH_PCM043)
+extern void pcm043_ac97_cold_reset(struct snd_ac97 *ac97);
+extern void pcm043_ac97_warm_reset(struct snd_ac97 *ac97);
+#else
+void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) { }
+void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) { }
+#endif
+
+
/* Show the statistics of a flag only if its interrupt is enabled. The
* compiler will optimze this code to a no-op if the interrupt is not
* enabled.
@@ -691,6 +923,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
struct resource res;
char name[64];
bool shared;
+ bool ac97 = false;
/* SSIs that are not connected on the board should have a
* status = "disabled"
@@ -701,7 +934,13 @@ static int fsl_ssi_probe(struct platform_device *pdev)
/* We only support the SSI in "I2S Slave" mode */
sprop = of_get_property(np, "fsl,mode", NULL);
- if (!sprop || strcmp(sprop, "i2s-slave")) {
+ if (!sprop) {
+ dev_err(&pdev->dev, "fsl,mode property is necessary\n");
+ return -EINVAL;
+ }
+ if (!strcmp(sprop, "ac97-slave")) {
+ ac97 = true;
+ } else if (strcmp(sprop, "i2s-slave")) {
dev_notice(&pdev->dev, "mode %s is unsupported\n", sprop);
return -ENODEV;
}
@@ -717,13 +956,39 @@ static int fsl_ssi_probe(struct platform_device *pdev)
strcpy(ssi_private->name, p);
- /* Initialize this copy of the CPU DAI driver structure */
- memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_dai_template,
- sizeof(fsl_ssi_dai_template));
- ssi_private->cpu_dai_drv.name = ssi_private->name;
-
ssi_private->use_dma = !of_property_read_bool(np, "fsl,imx-fiq");
+ if (ac97) {
+ sprop = of_get_property(of_find_node_by_path("/"), "compatible",
+ NULL);
+ p = strrchr(sprop, ',');
+ if (p)
+ sprop = p + 1;
+
+ if (!strcmp(sprop, "imx27-pca100")) {
+ ssi_private->ac97_reset = pca100_ac97_cold_reset;
+ ssi_private->ac97_warm_reset = pca100_ac97_warm_reset;
+ } else if (!strcmp(sprop, "imx27-pcm043")) {
+ ssi_private->ac97_reset = pcm043_ac97_cold_reset;
+ ssi_private->ac97_warm_reset = pcm043_ac97_warm_reset;
+ } else {
+ dev_err(&pdev->dev, "Failed to enable ssi AC97 mode, unknown board.\n");
+ ret = -EINVAL;
+ goto error_kmalloc;
+ }
+
+ memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_ac97_dai,
+ sizeof(fsl_ssi_ac97_dai));
+
+ fsl_ac97_data = ssi_private;
+ ssi_private->imx_ac97 = true;
+ } else {
+ /* Initialize this copy of the CPU DAI driver structure */
+ memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_dai_template,
+ sizeof(fsl_ssi_dai_template));
+ }
+ ssi_private->cpu_dai_drv.name = ssi_private->name;
+
/* Get the addresses and IRQ */
ret = of_address_to_resource(np, 0, &res);
if (ret) {
@@ -922,6 +1187,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
}
done:
+ if (ssi_private->imx_ac97)
+ fsl_ssi_ac97_init();
+
return 0;
error_dai:
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 08/10] ASoC: fsl: Kconfig: Use fsl-ssi for phycore-ac97
2013-04-18 12:33 ` Markus Pargmann
@ 2013-04-18 12:33 ` Markus Pargmann
-1 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Fabio Estevam, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
Lars-Peter Clausen, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
Mark Brown, Timur Tabi, Liam Girdwood, Sascha Hauer
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
sound/soc/fsl/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 3843a18..28af843 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -153,7 +153,7 @@ config SND_SOC_PHYCORE_AC97
select SND_SOC_WM9712
select SND_SOC_IMX_PCM_FIQ
select SND_SOC_IMX_AUDMUX
- select SND_SOC_IMX_SSI
+ select SND_SOC_FSL_SSI
help
Say Y if you want to add support for SoC audio on Phytec phyCORE
and phyCARD boards in AC97 mode
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 08/10] ASoC: fsl: Kconfig: Use fsl-ssi for phycore-ac97
@ 2013-04-18 12:33 ` Markus Pargmann
0 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
sound/soc/fsl/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 3843a18..28af843 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -153,7 +153,7 @@ config SND_SOC_PHYCORE_AC97
select SND_SOC_WM9712
select SND_SOC_IMX_PCM_FIQ
select SND_SOC_IMX_AUDMUX
- select SND_SOC_IMX_SSI
+ select SND_SOC_FSL_SSI
help
Say Y if you want to add support for SoC audio on Phytec phyCORE
and phyCARD boards in AC97 mode
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 09/10] ASoC: fsl: Move fsl-ssi binding doc to sound/
2013-04-18 12:33 ` Markus Pargmann
@ 2013-04-18 12:33 ` Markus Pargmann
-1 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Fabio Estevam, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
Lars-Peter Clausen, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
Mark Brown, Timur Tabi, Liam Girdwood, Sascha Hauer
fsl-ssi was located in powerpc/fsl/ssi.txt. This is no powerpc specific
device, so it should be moved to sound/ as it connects to differen audio
codecs.
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
.../devicetree/bindings/powerpc/fsl/ssi.txt | 73 ----------------------
.../devicetree/bindings/sound/fsl,ssi.txt | 73 ++++++++++++++++++++++
2 files changed, 73 insertions(+), 73 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/powerpc/fsl/ssi.txt
create mode 100644 Documentation/devicetree/bindings/sound/fsl,ssi.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt b/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt
deleted file mode 100644
index 5ff76c9..0000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Freescale Synchronous Serial Interface
-
-The SSI is a serial device that communicates with audio codecs. It can
-be programmed in AC97, I2S, left-justified, or right-justified modes.
-
-Required properties:
-- compatible: Compatible list, contains "fsl,ssi".
-- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
-- reg: Offset and length of the register set for the device.
-- interrupts: <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and
- level information for the interrupt. This should be
- encoded based on the information in section 2)
- depending on the type of interrupt controller you
- have.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this device.
-- fsl,mode: The operating mode for the SSI interface.
- "i2s-slave" - I2S mode, SSI is clock slave
- "i2s-master" - I2S mode, SSI is clock master
- "lj-slave" - left-justified mode, SSI is clock slave
- "lj-master" - l.j. mode, SSI is clock master
- "rj-slave" - right-justified mode, SSI is clock slave
- "rj-master" - r.j., SSI is clock master
- "ac97-slave" - AC97 mode, SSI is clock slave
- "ac97-master" - AC97 mode, SSI is clock master
-- fsl,playback-dma: Phandle to a node for the DMA channel to use for
- playback of audio. This is typically dictated by SOC
- design. See the notes below.
-- fsl,capture-dma: Phandle to a node for the DMA channel to use for
- capture (recording) of audio. This is typically dictated
- by SOC design. See the notes below.
-- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
- This number is the maximum allowed value for SFCSR[TFWM0].
-- fsl,ssi-asynchronous:
- If specified, the SSI is to be programmed in asynchronous
- mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
- all be connected to valid signals. In synchronous mode,
- SRCK and SRFS are ignored. Asynchronous mode allows
- playback and capture to use different sample sizes and
- sample rates. Some drivers may require that SRCK and STCK
- be connected together, and SRFS and STFS be connected
- together. This would still allow different sample sizes,
- but not different sample rates.
-
-Optional properties:
-- codec-handle: Phandle to a 'codec' node that defines an audio
- codec connected to this SSI. This node is typically
- a child of an I2C or other control node.
-
-Child 'codec' node required properties:
-- compatible: Compatible list, contains the name of the codec
-
-Child 'codec' node optional properties:
-- clock-frequency: The frequency of the input clock, which typically comes
- from an on-board dedicated oscillator.
-
-Notes on fsl,playback-dma and fsl,capture-dma:
-
-On SOCs that have an SSI, specific DMA channels are hard-wired for playback
-and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for
-playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for
-playback and DMA channel 3 for capture. The developer can choose which
-DMA controller to use, but the channels themselves are hard-wired. The
-purpose of these two properties is to represent this hardware design.
-
-The device tree nodes for the DMA channels that are referenced by
-"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
-"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g.
-"fsl,mpc8610-dma-channel") can remain. If these nodes are left as
-"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
-drivers (fsldma) will attempt to use them, and it will conflict with the
-sound drivers.
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
new file mode 100644
index 0000000..5ff76c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -0,0 +1,73 @@
+Freescale Synchronous Serial Interface
+
+The SSI is a serial device that communicates with audio codecs. It can
+be programmed in AC97, I2S, left-justified, or right-justified modes.
+
+Required properties:
+- compatible: Compatible list, contains "fsl,ssi".
+- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
+- reg: Offset and length of the register set for the device.
+- interrupts: <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and
+ level information for the interrupt. This should be
+ encoded based on the information in section 2)
+ depending on the type of interrupt controller you
+ have.
+- interrupt-parent: The phandle for the interrupt controller that
+ services interrupts for this device.
+- fsl,mode: The operating mode for the SSI interface.
+ "i2s-slave" - I2S mode, SSI is clock slave
+ "i2s-master" - I2S mode, SSI is clock master
+ "lj-slave" - left-justified mode, SSI is clock slave
+ "lj-master" - l.j. mode, SSI is clock master
+ "rj-slave" - right-justified mode, SSI is clock slave
+ "rj-master" - r.j., SSI is clock master
+ "ac97-slave" - AC97 mode, SSI is clock slave
+ "ac97-master" - AC97 mode, SSI is clock master
+- fsl,playback-dma: Phandle to a node for the DMA channel to use for
+ playback of audio. This is typically dictated by SOC
+ design. See the notes below.
+- fsl,capture-dma: Phandle to a node for the DMA channel to use for
+ capture (recording) of audio. This is typically dictated
+ by SOC design. See the notes below.
+- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
+ This number is the maximum allowed value for SFCSR[TFWM0].
+- fsl,ssi-asynchronous:
+ If specified, the SSI is to be programmed in asynchronous
+ mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
+ all be connected to valid signals. In synchronous mode,
+ SRCK and SRFS are ignored. Asynchronous mode allows
+ playback and capture to use different sample sizes and
+ sample rates. Some drivers may require that SRCK and STCK
+ be connected together, and SRFS and STFS be connected
+ together. This would still allow different sample sizes,
+ but not different sample rates.
+
+Optional properties:
+- codec-handle: Phandle to a 'codec' node that defines an audio
+ codec connected to this SSI. This node is typically
+ a child of an I2C or other control node.
+
+Child 'codec' node required properties:
+- compatible: Compatible list, contains the name of the codec
+
+Child 'codec' node optional properties:
+- clock-frequency: The frequency of the input clock, which typically comes
+ from an on-board dedicated oscillator.
+
+Notes on fsl,playback-dma and fsl,capture-dma:
+
+On SOCs that have an SSI, specific DMA channels are hard-wired for playback
+and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for
+playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for
+playback and DMA channel 3 for capture. The developer can choose which
+DMA controller to use, but the channels themselves are hard-wired. The
+purpose of these two properties is to represent this hardware design.
+
+The device tree nodes for the DMA channels that are referenced by
+"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
+"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g.
+"fsl,mpc8610-dma-channel") can remain. If these nodes are left as
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
+drivers (fsldma) will attempt to use them, and it will conflict with the
+sound drivers.
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 09/10] ASoC: fsl: Move fsl-ssi binding doc to sound/
@ 2013-04-18 12:33 ` Markus Pargmann
0 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel
fsl-ssi was located in powerpc/fsl/ssi.txt. This is no powerpc specific
device, so it should be moved to sound/ as it connects to differen audio
codecs.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
.../devicetree/bindings/powerpc/fsl/ssi.txt | 73 ----------------------
.../devicetree/bindings/sound/fsl,ssi.txt | 73 ++++++++++++++++++++++
2 files changed, 73 insertions(+), 73 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/powerpc/fsl/ssi.txt
create mode 100644 Documentation/devicetree/bindings/sound/fsl,ssi.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt b/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt
deleted file mode 100644
index 5ff76c9..0000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Freescale Synchronous Serial Interface
-
-The SSI is a serial device that communicates with audio codecs. It can
-be programmed in AC97, I2S, left-justified, or right-justified modes.
-
-Required properties:
-- compatible: Compatible list, contains "fsl,ssi".
-- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
-- reg: Offset and length of the register set for the device.
-- interrupts: <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and
- level information for the interrupt. This should be
- encoded based on the information in section 2)
- depending on the type of interrupt controller you
- have.
-- interrupt-parent: The phandle for the interrupt controller that
- services interrupts for this device.
-- fsl,mode: The operating mode for the SSI interface.
- "i2s-slave" - I2S mode, SSI is clock slave
- "i2s-master" - I2S mode, SSI is clock master
- "lj-slave" - left-justified mode, SSI is clock slave
- "lj-master" - l.j. mode, SSI is clock master
- "rj-slave" - right-justified mode, SSI is clock slave
- "rj-master" - r.j., SSI is clock master
- "ac97-slave" - AC97 mode, SSI is clock slave
- "ac97-master" - AC97 mode, SSI is clock master
-- fsl,playback-dma: Phandle to a node for the DMA channel to use for
- playback of audio. This is typically dictated by SOC
- design. See the notes below.
-- fsl,capture-dma: Phandle to a node for the DMA channel to use for
- capture (recording) of audio. This is typically dictated
- by SOC design. See the notes below.
-- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
- This number is the maximum allowed value for SFCSR[TFWM0].
-- fsl,ssi-asynchronous:
- If specified, the SSI is to be programmed in asynchronous
- mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
- all be connected to valid signals. In synchronous mode,
- SRCK and SRFS are ignored. Asynchronous mode allows
- playback and capture to use different sample sizes and
- sample rates. Some drivers may require that SRCK and STCK
- be connected together, and SRFS and STFS be connected
- together. This would still allow different sample sizes,
- but not different sample rates.
-
-Optional properties:
-- codec-handle: Phandle to a 'codec' node that defines an audio
- codec connected to this SSI. This node is typically
- a child of an I2C or other control node.
-
-Child 'codec' node required properties:
-- compatible: Compatible list, contains the name of the codec
-
-Child 'codec' node optional properties:
-- clock-frequency: The frequency of the input clock, which typically comes
- from an on-board dedicated oscillator.
-
-Notes on fsl,playback-dma and fsl,capture-dma:
-
-On SOCs that have an SSI, specific DMA channels are hard-wired for playback
-and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for
-playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for
-playback and DMA channel 3 for capture. The developer can choose which
-DMA controller to use, but the channels themselves are hard-wired. The
-purpose of these two properties is to represent this hardware design.
-
-The device tree nodes for the DMA channels that are referenced by
-"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
-"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g.
-"fsl,mpc8610-dma-channel") can remain. If these nodes are left as
-"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
-drivers (fsldma) will attempt to use them, and it will conflict with the
-sound drivers.
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
new file mode 100644
index 0000000..5ff76c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -0,0 +1,73 @@
+Freescale Synchronous Serial Interface
+
+The SSI is a serial device that communicates with audio codecs. It can
+be programmed in AC97, I2S, left-justified, or right-justified modes.
+
+Required properties:
+- compatible: Compatible list, contains "fsl,ssi".
+- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
+- reg: Offset and length of the register set for the device.
+- interrupts: <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and
+ level information for the interrupt. This should be
+ encoded based on the information in section 2)
+ depending on the type of interrupt controller you
+ have.
+- interrupt-parent: The phandle for the interrupt controller that
+ services interrupts for this device.
+- fsl,mode: The operating mode for the SSI interface.
+ "i2s-slave" - I2S mode, SSI is clock slave
+ "i2s-master" - I2S mode, SSI is clock master
+ "lj-slave" - left-justified mode, SSI is clock slave
+ "lj-master" - l.j. mode, SSI is clock master
+ "rj-slave" - right-justified mode, SSI is clock slave
+ "rj-master" - r.j., SSI is clock master
+ "ac97-slave" - AC97 mode, SSI is clock slave
+ "ac97-master" - AC97 mode, SSI is clock master
+- fsl,playback-dma: Phandle to a node for the DMA channel to use for
+ playback of audio. This is typically dictated by SOC
+ design. See the notes below.
+- fsl,capture-dma: Phandle to a node for the DMA channel to use for
+ capture (recording) of audio. This is typically dictated
+ by SOC design. See the notes below.
+- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
+ This number is the maximum allowed value for SFCSR[TFWM0].
+- fsl,ssi-asynchronous:
+ If specified, the SSI is to be programmed in asynchronous
+ mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
+ all be connected to valid signals. In synchronous mode,
+ SRCK and SRFS are ignored. Asynchronous mode allows
+ playback and capture to use different sample sizes and
+ sample rates. Some drivers may require that SRCK and STCK
+ be connected together, and SRFS and STFS be connected
+ together. This would still allow different sample sizes,
+ but not different sample rates.
+
+Optional properties:
+- codec-handle: Phandle to a 'codec' node that defines an audio
+ codec connected to this SSI. This node is typically
+ a child of an I2C or other control node.
+
+Child 'codec' node required properties:
+- compatible: Compatible list, contains the name of the codec
+
+Child 'codec' node optional properties:
+- clock-frequency: The frequency of the input clock, which typically comes
+ from an on-board dedicated oscillator.
+
+Notes on fsl,playback-dma and fsl,capture-dma:
+
+On SOCs that have an SSI, specific DMA channels are hard-wired for playback
+and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for
+playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for
+playback and DMA channel 3 for capture. The developer can choose which
+DMA controller to use, but the channels themselves are hard-wired. The
+purpose of these two properties is to represent this hardware design.
+
+The device tree nodes for the DMA channels that are referenced by
+"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
+"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g.
+"fsl,mpc8610-dma-channel") can remain. If these nodes are left as
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
+drivers (fsldma) will attempt to use them, and it will conflict with the
+sound drivers.
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v4 10/10] ASoC: fsl: Update fsl-ssi binding doc
2013-04-18 12:33 ` Markus Pargmann
@ 2013-04-18 12:33 ` Markus Pargmann
-1 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Fabio Estevam, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
Lars-Peter Clausen, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
Mark Brown, Timur Tabi, Liam Girdwood, Sascha Hauer
Update the fsl-ssi bindings. DMA is no required property anymore and
uses the generic DMA bindings. imx-fiq is a new alternative to DMA
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
Notes:
Changes in v4:
- Add a comment about hardware bugs for imx-pcm-fiq
Changes in v3:
- In previous versions, I removed fsl,playback-dma and capture-dma. But they
are still in use by fsl_dma.c, so I added them again.
Documentation/devicetree/bindings/sound/fsl,ssi.txt | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
index 5ff76c9..0375ee0 100644
--- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -43,10 +43,20 @@ Required properties:
together. This would still allow different sample sizes,
but not different sample rates.
+Note that either dmas, dma-names or fsl,imx-fiq are required.
+
Optional properties:
- codec-handle: Phandle to a 'codec' node that defines an audio
codec connected to this SSI. This node is typically
a child of an I2C or other control node.
+- dmas: Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names: Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
+ is not defined.
+- fsl,imx-fiq: Bool property. Use imx-pcm-fiq instead of imx-pcm-dma.
+ Only necessary for some boards with incompatible
+ codec. imx-pcm-fiq will manually filter some data from
+ the codec. It is a workaround for a hardware bug.
Child 'codec' node required properties:
- compatible: Compatible list, contains the name of the codec
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v4 10/10] ASoC: fsl: Update fsl-ssi binding doc
@ 2013-04-18 12:33 ` Markus Pargmann
0 siblings, 0 replies; 28+ messages in thread
From: Markus Pargmann @ 2013-04-18 12:33 UTC (permalink / raw)
To: linux-arm-kernel
Update the fsl-ssi bindings. DMA is no required property anymore and
uses the generic DMA bindings. imx-fiq is a new alternative to DMA
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
Notes:
Changes in v4:
- Add a comment about hardware bugs for imx-pcm-fiq
Changes in v3:
- In previous versions, I removed fsl,playback-dma and capture-dma. But they
are still in use by fsl_dma.c, so I added them again.
Documentation/devicetree/bindings/sound/fsl,ssi.txt | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
index 5ff76c9..0375ee0 100644
--- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -43,10 +43,20 @@ Required properties:
together. This would still allow different sample sizes,
but not different sample rates.
+Note that either dmas, dma-names or fsl,imx-fiq are required.
+
Optional properties:
- codec-handle: Phandle to a 'codec' node that defines an audio
codec connected to this SSI. This node is typically
a child of an I2C or other control node.
+- dmas: Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names: Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
+ is not defined.
+- fsl,imx-fiq: Bool property. Use imx-pcm-fiq instead of imx-pcm-dma.
+ Only necessary for some boards with incompatible
+ codec. imx-pcm-fiq will manually filter some data from
+ the codec. It is a workaround for a hardware bug.
Child 'codec' node required properties:
- compatible: Compatible list, contains the name of the codec
--
1.8.1.5
^ permalink raw reply related [flat|nested] 28+ messages in thread