From: Denys Dmytriyenko <denys@ti.com>
To: "Cooper Jr., Franklin" <fcooper@ti.com>
Cc: "meta-arago@arago-project.org" <meta-arago@arago-project.org>,
"Zarmi, Ilan" <ilanz@ti.com>, "Sasover, Inon" <inon@ti.com>
Subject: Re: [PATCH v3 1/9] wlconf: configuration utility for wilink8 wireless driver
Date: Tue, 30 Apr 2013 09:50:27 -0400 [thread overview]
Message-ID: <20130430135027.GD30148@edge> (raw)
In-Reply-To: <E6295660-AB91-4931-8F91-7ECACB239F85@ti.com>
Correct.
http://arago-project.org/git/?p=meta-arago.git;a=commit;h=556c5accab0fdadb74b8302aa1893eab9e7097a8
--
Denys
On Tue, Apr 30, 2013 at 08:20:24AM -0400, Cooper Jr., Franklin wrote:
> Your patch set was committed April 24th.
>
> On Apr 30, 2013, at 1:14 AM, "Reizer, Eyal" <eyalr@ti.com> wrote:
>
> > Hi Denys,
> >
> > Ping again on this set of wilink8 recipes.
> >
> > Best Regards,
> > Eyal Reizer
> >
> >> -----Original Message-----
> >> From: Reizer, Eyal
> >> Sent: Wednesday, April 24, 2013 10:06 AM
> >> To: Dmytriyenko, Denys
> >> Cc: meta-arago@arago-project.org
> >> Subject: RE: [meta-arago] [PATCH v3 1/9] wlconf: configuration utility
> >> for wilink8 wireless driver
> >>
> >> Denys,
> >>
> >> Thanks for the update.
> >> Please let me know in case you need my help.
> >>
> >> Best Regards,
> >> Eyal
> >>
> >>> -----Original Message-----
> >>> From: Dmytriyenko, Denys
> >>> Sent: Tuesday, April 23, 2013 10:35 PM
> >>> To: Reizer, Eyal
> >>> Cc: meta-arago@arago-project.org
> >>> Subject: Re: [meta-arago] [PATCH v3 1/9] wlconf: configuration
> >> utility
> >>> for wilink8 wireless driver
> >>>
> >>> Eyal,
> >>>
> >>> Not yet - it failed to apply wpa-supplicant patch when I tried
> >>> yesterday. I may need to massage the patches, once I have time...
> >>>
> >>> --
> >>> Denys
> >>>
> >>>
> >>> On Tue, Apr 23, 2013 at 08:58:33AM +0000, Reizer, Eyal wrote:
> >>>> Ping on this set of wilink8 related patches.
> >>>>
> >>>> Regards,
> >>>> Eyal
> >>>>
> >>>>> -----Original Message-----
> >>>>> From: Reizer, Eyal
> >>>>> Sent: Sunday, April 21, 2013 9:09 AM
> >>>>> To: meta-arago@arago-project.org
> >>>>> Cc: Reizer, Eyal
> >>>>> Subject: [PATCH v3 1/9] wlconf: configuration utility for wilink8
> >>>>> wireless driver
> >>>>>
> >>>>> Add a recipe for building and installing the wlconf configuration
> >>>>> utility for TI Wilink8 family of chips.
> >>>>>
> >>>>> Signed-off-by: Eyal Reizer <eyalr@ti.com>
> >>>>> ---
> >>>>> Changes in v2:
> >>>>> * Rename to use an actual release name instead of _git
> >>>>> * Line indentation fixes
> >>>>> Changes in v3:
> >>>>> * Drop the PV assignment
> >>>>>
> >>>>> .../recipes-connectivity/wlconf/wlconf_r8.a6.01.bb | 36
> >>>>> ++++++++++++++++++++
> >>>>> 1 file changed, 36 insertions(+)
> >>>>> create mode 100644 meta-arago-extras/recipes-
> >>>>> connectivity/wlconf/wlconf_r8.a6.01.bb
> >>>>>
> >>>>> diff --git a/meta-arago-extras/recipes-
> >>>>> connectivity/wlconf/wlconf_r8.a6.01.bb
> >>>>> b/meta-arago-extras/recipes-
> >>>>> connectivity/wlconf/wlconf_r8.a6.01.bb
> >>>>> new file mode 100644
> >>>>> index 0000000..ade2e84
> >>>>> --- /dev/null
> >>>>> +++ b/meta-arago-extras/recipes-
> >>> connectivity/wlconf/wlconf_r8.a6.01.bb
> >>>>> @@ -0,0 +1,36 @@
> >>>>> +DESCRIPTION = "Configuration utility for TI wireless drivers"
> >>>>> +LICENSE = "GPLv2"
> >>>>> +LIC_FILES_CHKSUM =
> >> "file://README;beginline=1;endline=21;md5=adc05a1903d3f107f85c90328e3a
> >>> 9
> >>>>> 438"
> >>>>> +
> >>>>> +PR ="r1"
> >>>>> +PR_append = "+gitr${SRCREV}"
> >>>>> +
> >>>>> +SRCREV = "ol_r8.a6.01"
> >>>>> +SRC_URI = "git://github.com/TI-OpenLink/18xx-ti-utils.git"
> >>>>> +
> >>>>> +S = "${WORKDIR}/git/wlconf"
> >>>>> +
> >>>>> +EXTRA_OEMAKE = "CC=${TARGET_PREFIX}gcc"
> >>>>> +
> >>>>> +do_install() {
> >>>>> + install -d ${D}${bindir}
> >>>>> + install -d ${D}${bindir}/wlconf/
> >>>>> + install -d ${D}${bindir}/wlconf/official_inis
> >>>>> +
> >>>>> + install -m 0755 wlconf ${D}${bindir}/wlconf/
> >>>>> + install -m 0755 dictionary.txt ${D}${bindir}/wlconf/
> >>>>> + install -m 0755 struct.bin ${D}${bindir}/wlconf/
> >>>>> + install -m 0755 wl18xx-conf-default.bin
> >> ${D}${bindir}/wlconf/
> >>>>> + install -m 0755 README ${D}${bindir}/wlconf/
> >>>>> + install -m 0755 example.conf ${D}${bindir}/wlconf/
> >>>>> + install -m 0755 example.ini ${D}${bindir}/wlconf/
> >>>>> + install -m 0755 ${S}/official_inis/*
> >>>>> + ${D}${bindir}/wlconf/official_inis/
> >>>>> +}
> >>>>> +
> >>>>> +FILES_${PN} += " \
> >>>>> + ${bindir}/wlconf \
> >>>>> + ${bindir}/wlconf/official_inis \ "
> >>>>> +
> >>>>> +FILES_${PN}-dbg += "${bindir}/wlconf/.debug"
> >>>>> --
> >>>>> 1.7.9.5
> >>>>
> >>>> _______________________________________________
> >>>> meta-arago mailing list
> >>>> meta-arago@arago-project.org
> >>>> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
> > _______________________________________________
> > meta-arago mailing list
> > meta-arago@arago-project.org
> > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
next prev parent reply other threads:[~2013-04-30 13:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-21 6:08 [PATCH v3 1/9] wlconf: configuration utility for wilink8 wireless driver Eyal Reizer
2013-04-23 8:58 ` Reizer, Eyal
2013-04-23 19:35 ` Denys Dmytriyenko
2013-04-24 7:05 ` Reizer, Eyal
2013-04-30 6:14 ` Reizer, Eyal
2013-04-30 12:20 ` Cooper Jr., Franklin
2013-04-30 13:50 ` Denys Dmytriyenko [this message]
2013-04-30 14:02 ` Reizer, Eyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130430135027.GD30148@edge \
--to=denys@ti.com \
--cc=fcooper@ti.com \
--cc=ilanz@ti.com \
--cc=inon@ti.com \
--cc=meta-arago@arago-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.