All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Kirby <sim@hostway.ca>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	stable <stable@vger.kernel.org>, Jiri Slaby <jslaby@suse.cz>
Subject: Re: [ 02/42] TTY: do not update atime/mtime on read/write
Date: Thu, 2 May 2013 09:11:46 -0700	[thread overview]
Message-ID: <20130502161146.GA7454@hostway.ca> (raw)
In-Reply-To: <CA+55aFzfxMvWVRjqV4pzz7XtpDGbxwGumGVeRT7OsF95noG4xw@mail.gmail.com>

On Tue, Apr 30, 2013 at 06:41:44PM -0700, Linus Torvalds wrote:

> On Tue, Apr 30, 2013 at 5:57 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
> >
> > Patch is whitespace-damaged and totally untested! Caveat applicator.
> 
> Ok, so it's still whitespace-damaged, but it seems to work. The
> appended has the "8 second rule" too..
> 
> Comments? Simon?

Tested -- both hunks seem to work as intended. Thanks!

Simon-

Below became b0b885657b6c8ef63a46bc9299b2a7715d19acde

>            Linus
> 
> --- snip snip ---
>  drivers/tty/pty.c    | 3 +++
>  drivers/tty/tty_io.c | 4 ++--
>  2 files changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
> index a62798fcc014..59bfaecc4e14 100644
> --- a/drivers/tty/pty.c
> +++ b/drivers/tty/pty.c
> @@ -681,6 +681,9 @@ static int ptmx_open(struct inode *inode, struct file *filp)
> 
>         nonseekable_open(inode, filp);
> 
> +       /* We refuse fsnotify events on ptmx, since it's a shared resource */
> +       filp->f_mode |= FMODE_NONOTIFY;
> +
>         retval = tty_alloc_file(filp);
>         if (retval)
>                 return retval;
> diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
> index 97ebc8c5864e..6464029e4860 100644
> --- a/drivers/tty/tty_io.c
> +++ b/drivers/tty/tty_io.c
> @@ -988,10 +988,10 @@ void start_tty(struct tty_struct *tty)
> 
>  EXPORT_SYMBOL(start_tty);
> 
> +/* We limit tty time update visibility to every 8 seconds or so. */
>  static void tty_update_time(struct timespec *time)
>  {
> -       unsigned long sec = get_seconds();
> -       sec -= sec % 60;
> +       unsigned long sec = get_seconds() & ~7;
>         if ((long)(sec - time->tv_sec) > 0)
>                 time->tv_sec = sec;
>  }

  parent reply	other threads:[~2013-05-02 16:11 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-29 19:01 [ 00/42] 3.8.11-stable review Greg Kroah-Hartman
2013-04-29 19:01 ` [ 01/42] aio: fix possible invalid memory access when DEBUG is enabled Greg Kroah-Hartman
2013-04-29 19:01 ` [ 02/42] TTY: do not update atime/mtime on read/write Greg Kroah-Hartman
2013-04-30  0:14   ` Simon Kirby
2013-04-30  0:21     ` Greg Kroah-Hartman
2013-04-30  0:36       ` Simon Kirby
2013-04-30  1:37         ` Greg Kroah-Hartman
2013-04-30 23:50           ` Simon Kirby
2013-05-01  0:57           ` Linus Torvalds
2013-05-01  1:41             ` Linus Torvalds
2013-05-01  5:23               ` Jiri Slaby
2013-05-01 13:05               ` Wolfram Gloger
2013-05-02 16:11               ` Simon Kirby [this message]
2013-04-29 19:01 ` [ 03/42] TTY: fix atime/mtime regression Greg Kroah-Hartman
2013-04-30 12:02   ` Wolfram Gloger
2013-04-29 19:01 ` [ 04/42] sparc64: Fix race in TLB batch processing Greg Kroah-Hartman
2013-04-29 19:01 ` [ 05/42] atm: update msg_namelen in vcc_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 06/42] ax25: fix info leak via msg_name in ax25_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 07/42] Bluetooth: fix possible info leak in bt_sock_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 08/42] Bluetooth: RFCOMM - Fix missing msg_namelen update in rfcomm_sock_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 09/42] Bluetooth: SCO - Fix missing msg_namelen update in sco_sock_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 10/42] caif: Fix missing msg_namelen update in caif_seqpkt_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 11/42] irda: Fix missing msg_namelen update in irda_recvmsg_dgram() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 12/42] iucv: Fix missing msg_namelen update in iucv_sock_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 13/42] l2tp: fix info leak in l2tp_ip6_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 14/42] llc: Fix missing msg_namelen update in llc_ui_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 15/42] netrom: fix info leak via msg_name in nr_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 16/42] NFC: llcp: fix info leaks via msg_name in llcp_sock_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 17/42] rose: fix info leak via msg_name in rose_recvmsg() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 18/42] tipc: fix info leaks via msg_name in recv_msg/recv_stream Greg Kroah-Hartman
2013-04-29 19:02 ` [ 19/42] cbq: incorrect processing of high limits Greg Kroah-Hartman
2013-04-29 19:02 ` [ 20/42] net IPv6 : Fix broken IPv6 routing table after loopback down-up Greg Kroah-Hartman
2013-04-29 19:02 ` [ 21/42] net: count hw_addr syncs so that unsync works properly Greg Kroah-Hartman
2013-04-29 19:02 ` [ 22/42] atl1e: limit gso segment size to prevent generation of wrong ip length fields Greg Kroah-Hartman
2013-04-29 19:02 ` [ 23/42] bonding: fix bonding_masters race condition in bond unloading Greg Kroah-Hartman
2013-04-29 19:02 ` [ 24/42] bonding: IFF_BONDING is not stripped on enslave failure Greg Kroah-Hartman
2013-04-29 19:02 ` [ 25/42] bonding: fix l23 and l34 load balancing in forwarding path Greg Kroah-Hartman
2013-04-29 19:02 ` [ 26/42] af_unix: If we dont care about credentials coallesce all messages Greg Kroah-Hartman
2013-04-29 19:02 ` [ 27/42] netfilter: dont reset nf_trace in nf_reset() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 28/42] ipv6/tcp: Stop processing ICMPv6 redirect messages Greg Kroah-Hartman
2013-04-29 19:02 ` [ 29/42] rtnetlink: Call nlmsg_parse() with correct header length Greg Kroah-Hartman
2013-04-29 19:02 ` [ 30/42] tcp: incoming connections might use wrong route under synflood Greg Kroah-Hartman
2013-04-29 19:02 ` [ 31/42] tcp: Reallocate headroom if it would overflow csum_start Greg Kroah-Hartman
2013-04-29 19:02 ` [ 32/42] net: mvmdio: add select PHYLIB Greg Kroah-Hartman
2013-04-29 19:02 ` [ 33/42] esp4: fix error return code in esp_output() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 34/42] net: mvneta: fix improper tx queue usage in mvneta_tx() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 35/42] net: cdc_mbim: remove bogus sizeof() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 36/42] tcp: call tcp_replace_ts_recent() from tcp_ack() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 37/42] net: rate-limit warn-bad-offload splats Greg Kroah-Hartman
2013-04-29 19:02 ` [ 38/42] net: fix incorrect credentials passing Greg Kroah-Hartman
2013-04-29 19:02 ` [ 39/42] net: drop dst before queueing fragments Greg Kroah-Hartman
2013-04-29 19:02 ` [ 40/42] tracing: Fix selftest function recursion accounting Greg Kroah-Hartman
2013-04-29 19:02 ` [ 41/42] ARM: 7699/1: sched_clock: Add more notrace to prevent recursion Greg Kroah-Hartman
2013-04-29 19:02 ` [ 42/42] ARM: 7692/1: iop3xx: move IOP3XX_PERIPHERAL_VIRT_BASE Greg Kroah-Hartman
2013-04-30  1:54 ` [ 00/42] 3.8.11-stable review Shuah Khan
2013-04-30  1:54   ` Shuah Khan
2013-04-30  2:02   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130502161146.GA7454@hostway.ca \
    --to=sim@hostway.ca \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.cz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.