From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: [PATCH] ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards Date: Fri, 10 May 2013 19:35:58 -0700 Message-ID: <20130511023557.GB28602@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-02-ewr.mailhop.org ([204.13.248.72]:17773 "EHLO mho-02-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753956Ab3EKCgB (ORCPT ); Fri, 10 May 2013 22:36:01 -0400 Content-Disposition: inline Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-usb , Kishon Vijay Abraham I Commit ad871c10 (ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards) added support for MUSB on omap3 for device tree, but added the interrupts the wrong way probably as they were copied from the omap4.dtsi file. On omap3 we have TI specific interrupt controller, not GIC. Fix this by specifying the interrupt following the TI INTC binding. Without this fix MUSB won't work as it is trying to use irq0 instead of irq92. Signed-off-by: Tony Lindgren --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -516,7 +516,7 @@ usb_otg_hs: usb_otg_hs@480ab000 { compatible = "ti,omap3-musb"; reg = <0x480ab000 0x1000>; - interrupts = <0 92 0x4>, <0 93 0x4>; + interrupts = <92>, <93>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; multipoint = <1>; From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Fri, 10 May 2013 19:35:58 -0700 Subject: [PATCH] ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards Message-ID: <20130511023557.GB28602@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Commit ad871c10 (ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards) added support for MUSB on omap3 for device tree, but added the interrupts the wrong way probably as they were copied from the omap4.dtsi file. On omap3 we have TI specific interrupt controller, not GIC. Fix this by specifying the interrupt following the TI INTC binding. Without this fix MUSB won't work as it is trying to use irq0 instead of irq92. Signed-off-by: Tony Lindgren --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -516,7 +516,7 @@ usb_otg_hs: usb_otg_hs at 480ab000 { compatible = "ti,omap3-musb"; reg = <0x480ab000 0x1000>; - interrupts = <0 92 0x4>, <0 93 0x4>; + interrupts = <92>, <93>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; multipoint = <1>;