[RFC 3/4] ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443

All of lore.kernel.org
 help / color / mirror / Atom feed

From: "Heiko Stübner" <heiko@sntech.de>
To: Dan Williams <djbw@fb.com>
Cc: Vinod Koul <vinod.koul@intel.com>,
	linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	kgene.kim@samsung.com, linux-arm-kernel@lists.infradead.org
Subject: [RFC 3/4] ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443
Date: Sat, 11 May 2013 13:32:08 +0200	[thread overview]
Message-ID: <201305111332.08484.heiko@sntech.de> (raw)
In-Reply-To: <201305111330.05046.heiko@sntech.de>

This includes defining the mapping for the request sources.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/common.c |  103 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-s3c24xx/common.h |    3 +
 2 files changed, 106 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index c157103..9f64037 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -30,6 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/platform_data/dma-s3c24xx.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
@@ -302,3 +303,105 @@ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
 }
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+    defined(CONFIG_CPUS_3C2440) || defined(CONFIG_CPUS_3C2442)
+static struct resource s3c2410_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_DMA3),
+};
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static int s3c2412_dma_reqsel[S3C24XX_DMACH_MAX] = {
+	[S3C24XX_DMACH_XD0] = 17,
+	[S3C24XX_DMACH_XD1] = 18,
+	[S3C24XX_DMACH_SDI] = 10,
+	[S3C24XX_DMACH_SPI0_RX] = 1,
+	[S3C24XX_DMACH_SPI0_TX] = 0,
+	[S3C24XX_DMACH_SPI1_RX] = 3,
+	[S3C24XX_DMACH_SPI1_TX] = 2,
+	[S3C24XX_DMACH_UART0] = 19,
+	[S3C24XX_DMACH_UART1] = 21,
+	[S3C24XX_DMACH_UART2] = 23,
+	[S3C24XX_DMACH_UART0_SRC2] = 20,
+	[S3C24XX_DMACH_UART1_SRC2] = 22,
+	[S3C24XX_DMACH_UART2_SRC2] = 24,
+	[S3C24XX_DMACH_TIMER] = 9,
+	[S3C24XX_DMACH_I2S_RX] = 5,
+	[S3C24XX_DMACH_I2S_TX] = 4,
+	[S3C24XX_DMACH_USB_EP1] = 13,
+	[S3C24XX_DMACH_USB_EP2] = 14,
+	[S3C24XX_DMACH_USB_EP3] = 15,
+	[S3C24XX_DMACH_USB_EP4] = 16,
+};
+
+static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
+	.num_phy_channels = 4,
+	.reqsel_map = s3c2412_dma_reqsel,
+};
+
+struct platform_device s3c2412_device_dma = {
+	.name		= "s3c2412-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2412_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416)
+static struct resource s3c2443_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
+	[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
+	[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
+};
+
+static int s3c2443_dma_reqsel[S3C24XX_DMACH_MAX] = {
+	[S3C24XX_DMACH_XD0] = 17,
+	[S3C24XX_DMACH_XD1] = 18,
+	[S3C24XX_DMACH_SDI] = 10,
+	[S3C24XX_DMACH_SPI0_RX] = 1,
+	[S3C24XX_DMACH_SPI0_TX] = 0,
+	[S3C24XX_DMACH_SPI1_RX] = 3,
+	[S3C24XX_DMACH_SPI1_TX] = 2,
+	[S3C24XX_DMACH_UART0] = 19,
+	[S3C24XX_DMACH_UART1] = 21,
+	[S3C24XX_DMACH_UART2] = 23,
+	[S3C24XX_DMACH_UART3] = 25,
+	[S3C24XX_DMACH_UART0_SRC2] = 20,
+	[S3C24XX_DMACH_UART1_SRC2] = 22,
+	[S3C24XX_DMACH_UART2_SRC2] = 24,
+	[S3C24XX_DMACH_UART3_SRC2] = 26,
+	[S3C24XX_DMACH_TIMER] = 9,
+	[S3C24XX_DMACH_I2S_RX] = 5,
+	[S3C24XX_DMACH_I2S_TX] = 4,
+	[S3C24XX_DMACH_PCM_IN] = 28,
+	[S3C24XX_DMACH_PCM_OUT] = 27,
+	[S3C24XX_DMACH_MIC_IN] = 29,
+};
+
+static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
+	.num_phy_channels = 6,
+	.reqsel_map = s3c2443_dma_reqsel,
+};
+
+struct platform_device s3c2443_device_dma = {
+	.name		= "s3c2443-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2443_dma_resource),
+	.resource	= s3c2443_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2443_dma_platdata,
+	},
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 307c371..7e134d9 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -107,4 +107,7 @@ extern void s3c2443_init_irq(void);
 
 extern struct syscore_ops s3c24xx_irq_syscore_ops;
 
+extern struct platform_device s3c2412_device_dma;
+extern struct platform_device s3c2443_device_dma;
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
-- 
1.7.2.3

next prev parent reply	other threads:[~2013-05-11 11:32 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-11 11:30 [RFC 0/4] ARM: S3C24XX: add dmaengine based dma-driver Heiko Stübner
2013-05-11 11:30 ` Heiko Stübner
2013-05-11 11:30 ` [RFC 1/4] ARM: S3C24XX: number the dma clocks Heiko Stübner
2013-05-11 11:31 ` [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs Heiko Stübner
2013-05-14 12:47   ` Linus Walleij
2013-05-14 12:47     ` Linus Walleij
2013-05-14 13:51     ` Heiko Stübner
2013-05-14 13:51       ` Heiko Stübner
2013-05-15 18:38       ` Linus Walleij
2013-05-15 18:38         ` Linus Walleij
2013-05-14 14:21     ` Tomasz Figa
2013-05-14 14:21       ` Tomasz Figa
2013-05-15 18:53   ` Linus Walleij
2013-05-15 18:53     ` Linus Walleij
2013-05-15 20:31     ` Heiko Stübner
2013-05-15 20:31       ` Heiko Stübner
2013-05-15 21:20       ` Sylwester Nawrocki
2013-05-15 21:20         ` Sylwester Nawrocki
2013-05-15 21:48         ` Heiko Stübner
2013-05-15 21:48           ` Heiko Stübner
2013-05-15 22:02           ` Tomasz Figa
2013-05-15 22:02             ` Tomasz Figa
2013-05-15 22:45             ` Heiko Stübner
2013-05-15 22:45               ` Heiko Stübner
2013-05-15 23:26               ` Tomasz Figa
2013-05-15 23:26                 ` Tomasz Figa
2013-05-17 12:20       ` Linus Walleij
2013-05-17 12:20         ` Linus Walleij
2013-05-11 11:32 ` Heiko Stübner [this message]
2013-05-11 11:32 ` [RFC 4/4] ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device Heiko Stübner

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:c157103 dfblob:9f64037 dfblob:307c371 dfblob:7e134d9 )
 OR (
bs:"[RFC 3/4] ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201305111332.08484.heiko@sntech.de \
    --to=heiko@sntech.de \
    --cc=djbw@fb.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.