[PATCH 1/2] ARM: mxs: Add default AUART2 pinmux

[marex@denx.de (Marek Vasut)]

Dear Shawn Guo,

> On Fri, May 10, 2013 at 02:26:34PM +0200, Marek Vasut wrote:
> > Add pinmux for AUART2 pins where they are in mux0.
> > 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Shawn Guo <shawn.guo@linaro.org>
> > Cc: Fabio Estevam <fabio.estevam@freescale.com>
> > ---
> > 
> >  arch/arm/boot/dts/imx28.dtsi |   11 +++++++++++
> >  1 file changed, 11 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> > index 7ba4966..13799cf 100644
> > --- a/arch/arm/boot/dts/imx28.dtsi
> > +++ b/arch/arm/boot/dts/imx28.dtsi
> > @@ -308,6 +308,17 @@
> > 
> >  					fsl,pull-up = <0>;
> >  				
> >  				};
> > 
> > +				auart2_2pins_b: auart2-2pins at 1 {
> > +					reg = <1>;
> > +					fsl,pinmux-ids = <
> > +						0x3080 /* 
MX28_PAD_AUART2_RX__AUART2_RX */
> > +						0x3090 /* 
MX28_PAD_AUART2_TX__AUART2_TX */
> > +					>;
> > +					fsl,drive-strength = <0>;
> > +					fsl,voltage = <1>;
> > +					fsl,pull-up = <0>;
> > +				};
> > +
> 
> I already applied a same patch from Eric B?nard.
> 
> Shawn
> 
> http://thread.gmane.org/gmane.linux.kernel/1471518/

Ok, looks like Eric was much faster :-) Sorry, I was doing this patchset on 
3.9.1 and didn't notice his patch.

Best regards,
Marek Vasut