From: Denys Dmytriyenko <denys@ti.com>
To: zhoujt@ti.com
Cc: meta-arago@arago-project.org
Subject: Re: [PATCH] added syslog-ng from meta-openembedded
Date: Tue, 14 May 2013 13:52:05 -0400 [thread overview]
Message-ID: <20130514175205.GE31835@denix.org> (raw)
In-Reply-To: <1367511802-855-1-git-send-email-zhoujt@ti.com>
On Thu, May 02, 2013 at 12:23:22PM -0400, zhoujt@ti.com wrote:
> From: Jingting Zhou <a0221004@ares-ubuntu>
Jingting,
Will you be re-sending these patches? This one only needs 2 little
corrections, otherwise is good on its own:
1. Please fix your From line, as well as don't forget Signed-by line, which is
automatically added with git-commit -s or even with git-format-patch -s
2. Commit message is almost right, but should rather be like this:
[PATCH] syslog-ng: added from meta-openembedded
--
Denys
>
> ---
> .../recipes-bsp/syslog-ng/files/initscript | 45 ++++++
> .../recipes-bsp/syslog-ng/files/syslog-ng.conf | 155 ++++++++++++++++++++
> .../recipes-bsp/syslog-ng/syslog-ng.inc | 90 ++++++++++++
> .../recipes-bsp/syslog-ng/syslog-ng_3.2.5.bb | 10 ++
> 4 files changed, 300 insertions(+)
> create mode 100755 meta-arago-extras/recipes-bsp/syslog-ng/files/initscript
> create mode 100755 meta-arago-extras/recipes-bsp/syslog-ng/files/syslog-ng.conf
> create mode 100755 meta-arago-extras/recipes-bsp/syslog-ng/syslog-ng.inc
> create mode 100755 meta-arago-extras/recipes-bsp/syslog-ng/syslog-ng_3.2.5.bb
>
> diff --git a/meta-arago-extras/recipes-bsp/syslog-ng/files/initscript b/meta-arago-extras/recipes-bsp/syslog-ng/files/initscript
> new file mode 100755
> index 0000000..b95e8ad
> --- /dev/null
> +++ b/meta-arago-extras/recipes-bsp/syslog-ng/files/initscript
> @@ -0,0 +1,45 @@
> +#! /bin/sh
> +#
> +# This is an init script for openembedded
> +# Copy it to /etc/init.d/syslog-ng and type
> +# > update-rc.d syslog-ng defaults 5
> +#
> +
> +
> +syslog_ng=/usr/sbin/syslog-ng
> +test -x "$syslog_ng" || exit 0
> +
> +case "$1" in
> + start)
> + echo -n "Starting syslog-ng:"
> + start-stop-daemon --start --quiet --exec $syslog_ng
> + echo "."
> + ;;
> + stop)
> + echo -n "Stopping syslog-ng:"
> + start-stop-daemon --stop --quiet --pidfile /var/run/syslog-ng.pid
> + echo "."
> + ;;
> + reload|force-reload)
> + start-stop-daemon --stop --quiet --signal 1 --exec $syslog_ng
> + ;;
> + restart)
> + echo "Stopping syslog-ng:"
> + start-stop-daemon --stop --quiet --pidfile /var/run/syslog-ng.pid
> + echo -n "Waiting for syslog-ng to die off"
> + for i in 1 2 3 ;
> + do
> + sleep 1
> + echo -n "."
> + done
> + echo ""
> + echo -n "Starting syslog-ng:"
> + start-stop-daemon --start --quiet --exec $syslog_ng
> + echo "."
> + ;;
> + *)
> + echo "Usage: /etc/init.d/syslog-ng {start|stop|reload|restart|force-reload}"
> + exit 1
> +esac
> +
> +exit 0
> diff --git a/meta-arago-extras/recipes-bsp/syslog-ng/files/syslog-ng.conf b/meta-arago-extras/recipes-bsp/syslog-ng/files/syslog-ng.conf
> new file mode 100755
> index 0000000..e760dfb
> --- /dev/null
> +++ b/meta-arago-extras/recipes-bsp/syslog-ng/files/syslog-ng.conf
> @@ -0,0 +1,155 @@
> +@version: 3.2
> +#
> +# Syslog-ng configuration file, compatible with default Debian syslogd
> +# installation. Originally written by anonymous (I can't find his name)
> +# Revised, and rewrited by me (SZALAY Attila <sasa@debian.org>)
> +
> +# First, set some global options.
> +options { long_hostnames(off); flush_lines(0); use_dns(no); use_fqdn(no);
> + owner("root"); group("adm"); perm(0640); stats_freq(0);
> + bad_hostname("^gconfd$");
> +};
> +
> +########################
> +# Sources
> +########################
> +# This is the default behavior of sysklogd package
> +# Logs may come from unix stream, but not from another machine.
> +#
> +source s_src { unix-dgram("/dev/log"); internal();
> + file("/proc/kmsg" program_override("kernel"));
> +};
> +
> +# If you wish to get logs from remote machine you should uncomment
> +# this and comment the above source line.
> +#
> +#source s_net { tcp(ip(127.0.0.1) port(1000) authentication(required) encrypt(allow)); };
> +
> +########################
> +# Destinations
> +########################
> +# First some standard logfile
> +#
> +destination d_auth { file("/var/log/auth.log"); };
> +destination d_cron { file("/var/log/cron.log"); };
> +destination d_daemon { file("/var/log/daemon.log"); };
> +destination d_kern { file("/var/log/kern.log"); };
> +destination d_lpr { file("/var/log/lpr.log"); };
> +destination d_mail { file("/var/log/mail.log"); };
> +destination d_syslog { file("/var/log/syslog"); };
> +destination d_user { file("/var/log/user.log"); };
> +destination d_uucp { file("/var/log/uucp.log"); };
> +
> +# This files are the log come from the mail subsystem.
> +#
> +destination d_mailinfo { file("/var/log/mail/mail.info"); };
> +destination d_mailwarn { file("/var/log/mail/mail.warn"); };
> +destination d_mailerr { file("/var/log/mail/mail.err"); };
> +
> +# Logging for INN news system
> +#
> +destination d_newscrit { file("/var/log/news/news.crit"); };
> +destination d_newserr { file("/var/log/news/news.err"); };
> +destination d_newsnotice { file("/var/log/news/news.notice"); };
> +
> +# Some `catch-all' logfiles.
> +#
> +destination d_debug { file("/var/log/debug"); };
> +destination d_error { file("/var/log/error"); };
> +destination d_messages { file("/var/log/messages"); };
> +
> +# The root's console.
> +#
> +destination d_console { usertty("root"); };
> +
> +# Virtual console.
> +#
> +destination d_console_all { file("/dev/tty10"); };
> +
> +# The named pipe /dev/xconsole is for the nsole' utility. To use it,
> +# you must invoke nsole' with the -file' option:
> +#
> +# $ xconsole -file /dev/xconsole [...]
> +#
> +destination d_xconsole { pipe("/dev/xconsole"); };
> +
> +# Send the messages to an other host
> +#
> +#destination d_net { tcp("127.0.0.1" port(1000) authentication(on) encrypt(on) log_fifo_size(1000)); };
> +
> +# Debian only
> +destination d_ppp { file("/var/log/ppp.log"); };
> +
> +########################
> +# Filters
> +########################
> +# Here's come the filter options. With this rules, we can set which
> +# message go where.
> +
> +filter f_dbg { level(debug); };
> +filter f_info { level(info); };
> +filter f_notice { level(notice); };
> +filter f_warn { level(warn); };
> +filter f_err { level(err); };
> +filter f_crit { level(crit .. emerg); };
> +
> +filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };
> +filter f_error { level(err .. emerg) ; };
> +filter f_messages { level(info,notice,warn) and
> + not facility(auth,authpriv,cron,daemon,mail,news); };
> +
> +filter f_auth { facility(auth, authpriv) and not filter(f_debug); };
> +filter f_cron { facility(cron) and not filter(f_debug); };
> +filter f_daemon { facility(daemon) and not filter(f_debug); };
> +filter f_kern { facility(kern) and not filter(f_debug); };
> +filter f_lpr { facility(lpr) and not filter(f_debug); };
> +filter f_local { facility(local0, local1, local3, local4, local5,
> + local6, local7) and not filter(f_debug); };
> +filter f_mail { facility(mail) and not filter(f_debug); };
> +filter f_news { facility(news) and not filter(f_debug); };
> +filter f_syslog3 { not facility(auth, authpriv, mail) and not filter(f_debug); };
> +filter f_user { facility(user) and not filter(f_debug); };
> +filter f_uucp { facility(uucp) and not filter(f_debug); };
> +
> +filter f_cnews { level(notice, err, crit) and facility(news); };
> +filter f_cother { level(debug, info, notice, warn) or facility(daemon, mail); };
> +
> +filter f_ppp { facility(local2) and not filter(f_debug); };
> +filter f_console { level(warn .. emerg); };
> +
> +########################
> +# Log paths
> +########################
> +log { source(s_src); filter(f_auth); destination(d_auth); };
> +log { source(s_src); filter(f_cron); destination(d_cron); };
> +log { source(s_src); filter(f_daemon); destination(d_daemon); };
> +log { source(s_src); filter(f_kern); destination(d_kern); };
> +log { source(s_src); filter(f_lpr); destination(d_lpr); };
> +log { source(s_src); filter(f_syslog3); destination(d_syslog); };
> +log { source(s_src); filter(f_user); destination(d_user); };
> +log { source(s_src); filter(f_uucp); destination(d_uucp); };
> +
> +log { source(s_src); filter(f_mail); destination(d_mail); };
> +#log { source(s_src); filter(f_mail); filter(f_info); destination(d_mailinfo); };
> +#log { source(s_src); filter(f_mail); filter(f_warn); destination(d_mailwarn); };
> +#log { source(s_src); filter(f_mail); filter(f_err); destination(d_mailerr); };
> +
> +log { source(s_src); filter(f_news); filter(f_crit); destination(d_newscrit); };
> +log { source(s_src); filter(f_news); filter(f_err); destination(d_newserr); };
> +log { source(s_src); filter(f_news); filter(f_notice); destination(d_newsnotice); };
> +#log { source(s_src); filter(f_cnews); destination(d_console_all); };
> +#log { source(s_src); filter(f_cother); destination(d_console_all); };
> +
> +#log { source(s_src); filter(f_ppp); destination(d_ppp); };
> +
> +log { source(s_src); filter(f_debug); destination(d_debug); };
> +log { source(s_src); filter(f_error); destination(d_error); };
> +log { source(s_src); filter(f_messages); destination(d_messages); };
> +
> +log { source(s_src); filter(f_console); destination(d_console_all);
> + destination(d_xconsole); };
> +log { source(s_src); filter(f_crit); destination(d_console); };
> +
> +# All messages send to a remote site
> +#
> +#log { source(s_src); destination(d_net); };
> diff --git a/meta-arago-extras/recipes-bsp/syslog-ng/syslog-ng.inc b/meta-arago-extras/recipes-bsp/syslog-ng/syslog-ng.inc
> new file mode 100755
> index 0000000..584e4a4
> --- /dev/null
> +++ b/meta-arago-extras/recipes-bsp/syslog-ng/syslog-ng.inc
> @@ -0,0 +1,90 @@
> +DESCRIPTION = "Alternative system logger daemon"
> +DEPENDS = "libol flex eventlog glib-2.0"
> +LICENSE = "GPL LGPL"
> +LIC_FILES_CHKSUM = "file://COPYING;md5=7ec1bcc46f28b11f4722e20d9b7dd4d5"
> +
> +# syslog initscript is handled explicitly because order of
> +# update-rc.d and update-alternatives is important
> +RDEPENDS_${PN} += " ${@base_conditional("ONLINE_PACKAGE_MANAGEMENT", "none", "", "update-rc.d", d)}"
> +
> +INC_PR = "r9"
> +
> +inherit autotools
> +
> +SRC_URI = "http://www.balabit.com/downloads/files/syslog-ng/sources/${PV}/source/${PN}_${PV}.tar.gz"
> +
> +noipv6 = "${@base_contains('DISTRO_FEATURES', 'ipv6', '', '--disable-ipv6', d)}"
> +
> +EXTRA_OECONF = " \
> + --with-libnet=${STAGING_BINDIR_CROSS} \
> + --enable-dynamic-linking \
> + ${noipv6} \
> + --enable-ssl \
> + --disable-sub-streams \
> + --disable-pacct \
> + --disable-linux-caps \
> + --disable-pcre \
> + --disable-sql \
> +"
> +
> +do_configure_prepend() {
> + eval "${@base_contains('DISTRO_FEATURES', 'largefile', '', 'sed -i -e "s/-D_LARGEFILE_SOURCE//" -e "s/-D_FILE_OFFSET_BITS=64//" ${S}/configure.in', d)}"
> +}
> +
> +# rename modules.conf because it breaks update-modules
> +# see http://lists.linuxtogo.org/pipermail/openembedded-devel/2011-October/035537.html
> +do_install_append() {
> + mv ${D}/${sysconfdir}/modules.conf ${D}/${sysconfdir}/scl-modules.conf
> + sed -i "s#@include 'modules.conf'#@include 'scl-modules.conf'#g" ${D}/${sysconfdir}/scl.conf
> + install -d ${D}/${sysconfdir}/${PN}
> + install ${WORKDIR}/syslog-ng.conf ${D}${sysconfdir}/${PN}.conf
> + install -d ${D}/${sysconfdir}/init.d
> + install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/syslog.${PN}
> +}
> +
> +FILES_${PN} = "${bindir}/* ${sbindir}/* ${libexecdir}/* ${libdir}/lib*${SOLIBS} \
> + ${sysconfdir} ${sharedstatedir} ${localstatedir} \
> + ${base_bindir}/* ${base_sbindir}/* \
> + ${base_libdir}/*${SOLIBS} \
> + ${datadir}/${BPN} ${libdir}/${BPN}/*${SOLIBS} \
> + ${datadir}/include/scl/ ${datadir}/xsd"
> +FILES_${PN}-dev += "${libdir}/${BPN}/lib*.la ${libdir}/${BPN}/*${SOLIBSDEV}"
> +CONFFILES_${PN} = "${sysconfdir}/${PN}.conf ${sysconfdir}/scl.conf ${sysconfdir}/scl-modules.conf"
> +
> +pkg_postinst_${PN} () {
> + /etc/init.d/syslog stop
> + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 200
> +
> + if test "x$D" != "x"; then
> + OPT="-r $D"
> + else
> + OPT="-s"
> + fi
> + # remove all rc.d-links potentially created from alternative
> + # syslog packages before creating new ones
> + update-rc.d $OPT -f syslog remove
> + update-rc.d $OPT syslog start 20 2 3 4 5 . stop 90 0 1 6 .
> +}
> +
> +pkg_prerm_${PN} () {
> + if test "x$D" = "x"; then
> + if test "$1" = "upgrade" -o "$1" = "remove"; then
> + /etc/init.d/syslog stop
> + fi
> + fi
> +
> + update-alternatives --remove syslog-init syslog.${PN}
> +}
> +
> +pkg_postrm_${PN} () {
> + if test "x$D" != "x"; then
> + OPT="-r $D"
> + else
> + OPT=""
> + fi
> + if test "$1" = "remove" -o "$1" = "purge"; then
> + if ! test -e "/etc/init.d/syslog"; then
> + update-rc.d $OPT syslog remove
> + fi
> + fi
> +}
> diff --git a/meta-arago-extras/recipes-bsp/syslog-ng/syslog-ng_3.2.5.bb b/meta-arago-extras/recipes-bsp/syslog-ng/syslog-ng_3.2.5.bb
> new file mode 100755
> index 0000000..62faa83
> --- /dev/null
> +++ b/meta-arago-extras/recipes-bsp/syslog-ng/syslog-ng_3.2.5.bb
> @@ -0,0 +1,10 @@
> +require syslog-ng.inc
> +PR = "${INC_PR}.1"
> +
> +SRC_URI += " \
> + file://syslog-ng.conf \
> + file://initscript \
> +"
> +
> +SRC_URI[md5sum] = "60737452ce898f9dc7170dfdc9bfd732"
> +SRC_URI[sha256sum] = "ffc9f3a0ebea836c1c737b1ff49efe731d885af1d8aacf9eca79d9144eeefa89"
> --
> 1.7.9.5
>
> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
>
prev parent reply other threads:[~2013-05-14 17:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-02 16:23 [PATCH] added syslog-ng from meta-openembedded zhoujt
2013-05-14 17:52 ` Denys Dmytriyenko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130514175205.GE31835@denix.org \
--to=denys@ti.com \
--cc=meta-arago@arago-project.org \
--cc=zhoujt@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.