imx53 cspi clock problem

[s.hauer@pengutronix.de (Sascha Hauer)]

On Thu, May 23, 2013 at 10:08:59AM +0200, Jonas Andersson wrote:
> On 2013-05-22 18:47, Sascha Hauer wrote:
> >On Wed, May 22, 2013 at 08:52:45AM +0200, Jonas Andersson wrote:
> >>	compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
> >>	reg = <0x63fc0000 0x4000>;
> >>	interrupts = <38>;
> >>	clocks = <&clks 55>, <&clks 0>;
> >Unlike the eCSPI controller the CSPI controller seems to have only one
> >clock. This should probably be
> >
> >	clocks = <&clks 55>, <&clks 55>;
> >
> This works fine.
> 
> Is it the right solution to define both clocks to the same in all
> the imx*.dtsi files? imx25.dtsi defines only one clock "ipg" so
> spi_imx_probe() will probably fail.

Yes, they should all be fixed that way. Care to send a patch?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |