From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Matt Wilson <msw@amazon.com>
Cc: xen-devel <xen-devel@lists.xen.org>, "Keir Fraser" <keir@xen.org>,
"Ian Campbell" <Ian.Campbell@citrix.com>,
"Roger Pau Monné" <roger.pau@citrix.com>
Subject: Re: HVM CPU enumeration, mapping to VCPU ID (Was: Re: [Xen-users] FreeBSD PVHVM call for testing)
Date: Tue, 4 Jun 2013 10:22:24 -0400 [thread overview]
Message-ID: <20130604142224.GC7110@phenom.dumpdata.com> (raw)
In-Reply-To: <20130603182258.GA17127@u109add4315675089e695.ant.amazon.com>
> > > > The new hypercall to figure this out could be used, but that wouldn't
> > > > explain why we are failing to start on the correct VCPU?
> > >
> > > I didn't follow the jump here. Can you provide an example?
> >
> > http://lists.xen.org/archives/html/xen-devel/2013-05/msg00941.html
>
> OK, got it.
>
> [ 84.619508] smpboot: Booting Node 0 Processor 1 APIC 0x8
>
> So it seems like, in this case:
>
> int __cpuinit native_cpu_up(unsigned int cpu)
> {
> int apicid = apic->cpu_present_to_apicid(cpu);
>
> apic->cpu_present_to_apicid(1) returned 8 instead of 2.
>
> All of that should have been set up correctly ahead of time by
> generic_processor_info() for all possible CPUs. Do you have the full
> boot log?
>
Loading initramf.gz.............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
.......................................................................................................................................................................................................................................................................................................................................................................................................................ready.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0upstream-00022-g49c1bf1-dirty (konrad@build-external.dumpdata.com) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #6 SMP Tue May 7 15:02:36 EDT 2013
[ 0.000000] Command line: initrd=initramf.gz console=ttyS0,115200 test=net nofb BOOT_IMAGE=vmlinuz
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] Hypervisor detected: Xen HVM
[ 0.000000] Xen version 4.3.
[ 0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
[ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
[ 0.000000] You might have to change the root device
[ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[ 0.000000] in your root= kernel command line option
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fbba0-0x000fbbaf] mapped at [ffff8800000fbba0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x77800000-0x779fffff]
[ 0.000000] init_memory_mapping: [mem 0x74000000-0x777fffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x73ffffff]
[ 0.000000] init_memory_mapping: [mem 0x77a00000-0x7f7fffff]
[ 0.000000] RAMDISK: [mem 0x77bec000-0x7f7defff]
[ 0.000000] ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
[ 0.000000] ACPI: XSDT 00000000fc0150c0 00054 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: FACP 00000000fc0149f0 000F4 (v04 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: DSDT 00000000fc0035e0 1138D (v02 Xen HVM 00000000 INTL 20090123)
[ 0.000000] ACPI: FACS 00000000fc0035a0 00040
[ 0.000000] ACPI: APIC 00000000fc014af0 00460 (v02 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: HPET 00000000fc014fd0 00038 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: WAET 00000000fc015010 00028 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: SSDT 00000000fc015040 00031 (v02 Xen HVM 00000000 INTL 20090123)
[ 0.000000] ACPI: SSDT 00000000fc015080 00031 (v02 Xen HVM 00000000 INTL 20090123)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7f7fffff]
[ 0.000000] NODE_DATA [mem 0x7f7fb000-0x7f7fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x7f7fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x1e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x22] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x24] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x26] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x40] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x42] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x44] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x46] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x48] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x4a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x4c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x4e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x50] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0x52] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x54] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x56] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x58] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x5a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x5c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x5e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0x60] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0x62] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0x64] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0x66] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0x68] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0x6a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0x6c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0x6e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0x70] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0x72] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x74] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x76] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x78] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x7a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x7c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x7e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0x80] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x41] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x42] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x43] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x44] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x45] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x46] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x47] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x48] lapic_id[0x90] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x49] lapic_id[0x92] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x4a] lapic_id[0x94] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x4b] lapic_id[0x96] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x4c] lapic_id[0x98] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x4d] lapic_id[0x9a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x4e] lapic_id[0x9c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x4f] lapic_id[0x9e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x50] lapic_id[0xa0] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x51] lapic_id[0xa2] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x52] lapic_id[0xa4] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x53] lapic_id[0xa6] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x54] lapic_id[0xa8] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x55] lapic_id[0xaa] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x56] lapic_id[0xac] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x57] lapic_id[0xae] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x58] lapic_id[0xb0] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x59] lapic_id[0xb2] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x5a] lapic_id[0xb4] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x5b] lapic_id[0xb6] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x5c] lapic_id[0xb8] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x5d] lapic_id[0xba] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x5e] lapic_id[0xbc] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x5f] lapic_id[0xbe] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x60] lapic_id[0xc0] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x61] lapic_id[0xc2] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x62] lapic_id[0xc4] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x63] lapic_id[0xc6] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x64] lapic_id[0xc8] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x65] lapic_id[0xca] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x66] lapic_id[0xcc] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x67] lapic_id[0xce] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x68] lapic_id[0xd0] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x69] lapic_id[0xd2] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x6a] lapic_id[0xd4] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x6b] lapic_id[0xd6] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x6c] lapic_id[0xd8] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x6d] lapic_id[0xda] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x6e] lapic_id[0xdc] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x6f] lapic_id[0xde] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x70] lapic_id[0xe0] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x71] lapic_id[0xe2] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x72] lapic_id[0xe4] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x73] lapic_id[0xe6] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x74] lapic_id[0xe8] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x75] lapic_id[0xea] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x76] lapic_id[0xec] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x77] lapic_id[0xee] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x78] lapic_id[0xf0] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x79] lapic_id[0xf2] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x7a] lapic_id[0xf4] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x7b] lapic_id[0xf6] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x7c] lapic_id[0xf8] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x7d] lapic_id[0xfa] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x7e] lapic_id[0xfc] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x7f] lapic_id[0xfe] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 128 CPUs, 127 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0x7f800000-0xfbffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen HVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:128 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880074200000 s87808 r8192 d22784 u131072
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514980
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: initrd=initramf.gz console=ttyS0,115200 test=net nofb BOOT_IMAGE=vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1893840k/2088960k available (6809k kernel code, 396k absent, 194724k reserved, 6266k data, 1060k init)
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=128.
[ 0.000000] NR_IRQS:33024 nr_irqs:2112 16
[ 0.000000] Xen HVM callback vector for event delivery is enabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] kmemleak: Early log buffer exceeded (799), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
[ 0.000000] tsc: Detected 3093.074 MHz processor
[ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.14 BogoMIPS (lpj=3093074)
[ 0.018004] pid_max: default: 131072 minimum: 1024
[ 0.023082] Security Framework initialized
[ 0.028004] SELinux: Initializing.
[ 0.032178] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.040332] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.049167] Mount-cache hash table entries: 256
[ 0.055547] Initializing cgroup subsys cpuacct
[ 0.060010] Initializing cgroup subsys freezer
[ 0.066115] CPU: Physical Processor ID: 0
[ 0.070004] CPU: Processor Core ID: 0
[ 0.075005] mce: CPU supports 2 MCE banks
[ 0.079027] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.079027] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.079027] tlb_flushall_shift: 5
[ 0.108691] ACPI: Core revision 20130117
[ 0.127967] ACPI: All ACPI Tables successfully acquired
[ 0.134575] Switched APIC routing to physical flat.
[ 0.143211] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.160552] smpboot: CPU0: Intel(R) Xeon(R) CPU E31225 @ 3.10GHz (fam: 06, model: 2a, stepping: 07)
[ 0.171020] installing Xen timer for CPU 0
[ 0.176285] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 0.181742] Brought up 1 CPUs
[ 0.182008] smpboot: Total of 1 processors activated (6186.14 BogoMIPS)
[ 0.183549] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.187218] kworker/u:0 (15) used greatest stack depth: 5728 bytes left
[ 0.188091] RTC time: 16:02:23, date: 05/08/13
[ 0.189197] NET: Registered protocol family 16
[ 0.190567] kworker/u:0 (26) used greatest stack depth: 5656 bytes left
[ 0.191270] ACPI: bus type PCI registered
[ 0.192223] dca service started, version 1.12.1
[ 0.193510] PCI: Using configuration type 1 for base access
[ 0.203121] bio: create slab <bio-0> at 0
[ 0.204246] ACPI: Added _OSI(Module Device)
[ 0.205070] ACPI: Added _OSI(Processor Device)
[ 0.206007] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.207021] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.230407] ACPI: Interpreter enabled
[ 0.231010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.234008] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.237030] ACPI: (supports S0 S3 S4 S5)
[ 0.238006] ACPI: Using IOAPIC for interrupt routing
[ 0.239097] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.304682] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.305233] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.306150] PCI host bridge to bus 0000:00
[ 0.307013] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.308009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.309009] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.310008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.311007] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff]
[ 0.321122] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.321122] * this clock source is slow. Consider trying other clock sources
[ 0.324801] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.334009] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.335008] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.336488] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 0.339000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.341023] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.344029] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 0.375796] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.408515] ACPI: No dock devices found.
[ 0.409127] xen/balloon: Initialising balloon driver.
[ 0.412082] xen-balloon: Initialising balloon driver.
[ 0.413350] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.414015] vgaarb: loaded
[ 0.415007] vgaarb: bridge control possible 0000:00:02.0
[ 0.416216] ACPI: bus type USB registered
[ 0.417132] usbcore: registered new interface driver usbfs
[ 0.418087] usbcore: registered new interface driver hub
[ 0.419109] usbcore: registered new device driver usb
[ 0.420197] pps_core: LinuxPPS API ver. 1 registered
[ 0.421013] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.422067] PTP clock support registered
[ 0.423147] PCI: Using ACPI for IRQ routing
[ 0.425142] NetLabel: Initializing
[ 0.426016] NetLabel: domain hash size = 128
[ 0.427006] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.428041] NetLabel: unlabeled traffic allowed by default
[ 0.429261] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.430032] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.432343] hpet0: 3 comparators, 64-bit 62.500000 MHz counter
[ 0.434050] Switching to clocksource xen
[ 0.445570] pnp: PnP ACPI init
[ 0.449585] ACPI: bus type PNP registered
[ 0.454852] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.463906] system 00:02: [io 0x08a0-0x08a3] has been reserved
[ 0.471170] system 00:02: [io 0x0cc0-0x0ccf] has been reserved
[ 0.478425] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.486674] system 00:0b: [io 0x10c0-0x1141] has been reserved
[ 0.494022] system 00:0b: [io 0xb044-0xb047] has been reserved
[ 0.529363] pnp: PnP ACPI: found 12 devices
[ 0.534578] ACPI: bus type PNP unregistered
[ 0.548620] NET: Registered protocol family 2
[ 0.554102] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.562833] TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
[ 0.571383] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.579085] TCP: reno registered
[ 0.583084] UDP hash table entries: 1024 (order: 5, 163840 bytes)
[ 0.590605] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
[ 0.599144] NET: Registered protocol family 1
[ 0.604570] RPC: Registered named UNIX socket transport module.
[ 0.611845] RPC: Registered udp transport module.
[ 0.617442] RPC: Registered tcp transport module.
[ 0.623361] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.631110] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.638355] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.645352] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.653163] Unpacking initramfs...
[ 2.665438] Freeing initrd memory: 126924k freed
[ 2.685115] Machine check injector initialized
[ 2.691259] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
[ 2.698107] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.708013] Scanning for low memory corruption every 60 seconds
[ 2.715204] audit: initializing netlink socket (disabled)
[ 2.721340] type=2000 audit(1368028946.427:1): initialized
[ 2.746153] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.754076] VFS: Disk quotas dquot_6.5.2
[ 2.758740] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.766586] NFS: Registering the id_resolver key type
[ 2.772412] Key type id_resolver registered
[ 2.777297] Key type id_legacy registered
[ 2.782015] NTFS driver 2.1.30 [Flags: R/W].
[ 2.787057] msgmni has been set to 3946
[ 2.792475] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 2.801055] io scheduler noop registered
[ 2.805620] io scheduler deadline registered
[ 2.810571] io scheduler cfq registered (default)
[ 2.816243] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.823155] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xf0000000
[ 2.833820] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.842362] ACPI: Power Button [PWRF]
[ 2.846802] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 2.855305] ACPI: Sleep Button [SLPF]
[ 2.896600] GHES: HEST is not enabled!
[ 2.901377] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 2.908901] Grant tables using version 1 layout.
[ 2.914474] Grant table initialized
[ 2.944409] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.983474] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.991905] Non-volatile memory driver v1.3
[ 2.996920] Linux agpgart interface v0.103
[ 3.002120] [drm] Initialized drm 1.1.0 20060810
[ 3.009382] loop: module loaded
[ 3.013471] libphy: Fixed MDIO Bus: probed
[ 3.018145] tun: Universal TUN/TAP device driver, 1.6
[ 3.023930] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.031109] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k
[ 3.041764] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 3.049129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.056864] ehci-pci: EHCI PCI platform driver
[ 3.062223] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.069486] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.077003] usbcore: registered new interface driver usblp
[ 3.083477] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.095464] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.101303] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.107627] mousedev: PS/2 mouse device common for all mice
[ 3.115733] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 3.133702] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.140779] rtc_cmos 00:04: alarms up to one day, 114 bytes nvram, hpet irqs
[ 3.149263] cpuidle: using governor ladder
[ 3.154239] cpuidle: using governor menu
[ 3.159122] EFI Variables Facility v0.08 2004-May-17
[ 3.165190] zram: Created 1 device(s) ...
[ 3.170185] Netfilter messages via NETLINK v0.30.
[ 3.176241] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.183848] ctnetlink v0.93: registering with nfnetlink.
[ 3.190689] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.197472] TCP: cubic registered
[ 3.201780] Initializing XFRM netlink socket
[ 3.207111] NET: Registered protocol family 10
[ 3.213416] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.220348] sit: IPv6 over IPv4 tunneling driver
[ 3.226247] NET: Registered protocol family 17
[ 3.231481] Key type dns_resolver registered
[ 3.236849] registered taskstats version 1
[ 3.242382] XENBUS: Device with no driver: device/vbd/5632
[ 3.248633] XENBUS: Device with no driver: device/vkbd/0
[ 3.254808] XENBUS: Device with no driver: device/vif/0
[ 3.261081] Magic number: 13:252:34
[ 3.267863] Freeing unused kernel memory: 1060k freed
[ 3.273942] Write protecting the kernel read-only data: 12288k
[ 3.283168] Freeing unused kernel memory: 1372k freed
[ 3.291587] Freeing unused kernel memory: 1492k freed
init started: BusyBox v1.14.3 (2013-05-05 20:35:32 EDT)
[ 3.306168] consoletype (1092) used greatest stack depth: 5192 bytes left
Mounting directories [ OK ]
[ 3.419189] mv (1106) used greatest stack depth: 5024 bytes left
mount: mount point /proc/bus/usb does not exist
[ 3.445186] modprobe (1121) used greatest stack depth: 4496 bytes left
mount: mount point /sys/kernel/config does not exist
[ 3.467269] input: Xen Virtual Keyboard as /devices/virtual/input/input3
[ 3.475315] input: Xen Virtual Pointer as /devices/virtual/input/input4
FATAL: Error inserting xen_fbfront (/lib/modules/3.9.0upstream-00022-g49c1bf1-dirty/kernel/drivers/video/xen-fbfront.ko): No such device
[ 3.601797] Initialising Xen virtual ethernet driver.
[ 3.710082] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632
[ 3.717646] tsc: Refined TSC clocksource calibration: 3092.973 MHz
[ 3.721460] vbd vbd-5632: failed to write error node for device/vbd/5632 (19 xenbus_dev_probe on device/vbd/5632)
[ 3.750127] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 3.761383] udevd (1159): /proc/1159/oom_adj is deprecated, please use /proc/1159/oom_score_adj instead.
[ 3.833519] SCSI subsystem initialized
[ 3.840470] ACPI: bus type ATA registered
[ 3.847543] libata version 3.00 loaded.
[ 3.853983] ata_piix 0000:00:01.1: version 2.13
[ 3.859870] ata_piix 0000:00:01.1: setting latency timer to 64
[ 3.878641] scsi0 : ata_piix
[ 3.885457] scsi1 : ata_piix
[ 3.889541] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc200 irq 14
[ 3.898192] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc208 irq 15
udevd-work[1391]: error opening ATTR{/sys/devices/system/cpu/cpu0/online} for writing: No such file or directory
[ 4.050772] ip (1723) used greatest stack depth: 3440 bytes left
[ 4.061922] ata2.01: NODEV after polling detection
[ 4.069697] ata2.00: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
[ 4.078630] ata2.00: configured for MWDMA2
[ 4.086794] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
[ 4.156734] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 4.163052] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.197236] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.220390] sr 1:0:0:0: Attached scsi generic sg0 type 5
Waiting for devices [ OK ]
Waiting for init.pre_custom [ OK ]
Waiting for fb [ OK ]
Waiting for network [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0... done.
[ OK ]
Waiting for init.custom [ OK ]
Starting SSHd ...
SSH started [2414]
Waiting for SSHd [ OK ]
WARNING: ssh currently running [2414] ignoring start request
FATAL: Module dump_dma not found.
ERROR: Module dump_dma does not exist in /proc/modules
[ 7.609564] Loading iSCSI transport class v2.0-870.
[ 7.618305] iscsi: registered transport (tcp)
hostname: Name or service not known
iscsistart: transport class version 2.0-870. iscsid version 2.0-872
Could not get list of targets from firmware.
May 8 16:02:31 (none) syslogd 1.5.0: restart.
Running in HVM context on Xen v4.3.
You might have to do kill -1 1 if you see 'can't open /dev/hvc0'
[1:0:0:0] cd/dvd QEMU QEMU DVD-ROM 0.10 /dev/sr0
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)
00:02.0 VGA compatible controller: Cirrus Logic GD 5446
00:03.0 Class ff80: XenSource, Inc. Xen Platform Device (rev 01)
CPU0
0: 176 IO-APIC-edge timer
1: 9 xen-pirq-ioapic-edge i8042
4: 235 xen-pirq-ioapic-edge serial
8: 4 xen-pirq-ioapic-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 125 xen-pirq-ioapic-edge i8042
14: 0 IO-APIC-edge ata_piix
15: 96 IO-APIC-edge ata_piix
64: 3675 xen-percpu-virq timer0
65: 0 xen-percpu-ipi resched0
66: 0 xen-percpu-ipi callfunc0
67: 0 xen-percpu-virq debug0
68: 0 xen-percpu-ipi callfuncsingle0
69: 300 xen-dyn-event xenbus
71: 0 xen-dyn-event vkbd
72: 19 xen-dyn-event eth0
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RTR: 0 APIC ICR read retries
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 0
MIS: 0
00000000-00000fff : reserved
00001000-0009dfff : System RAM
0009e000-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000c8bff : Video ROM
000c9000-000c99ff : Adapter ROM
000e0000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-7f7fffff : System RAM
01000000-016a6728 : Kernel code
016a6729-01cc52bf : Kernel data
01dd7000-026f5fff : Kernel bss
7f800000-7fffffff : RAM buffer
f0000000-fbffffff : PCI Bus 0000:00
f0000000-f1ffffff : 0000:00:02.0
f0000000-f1ffffff : cirrusfb
f2000000-f2ffffff : 0000:00:03.0
f2000000-f2ffffff : xen-platform-pci
f3000000-f3000fff : 0000:00:02.0
f3000000-f3000fff : cirrusfb
fc000000-ffffffff : reserved
fec00000-fec003ff : IOAPIC 0
fed00000-fed003ff : HPET 0
fee00000-fee00fff : Local APIC
MemTotal: 2024688 kB
MemFree: 1510268 kB
Buffers: 0 kB
Cached: 458324 kB
SwapCached: 0 kB
Active: 14096 kB
Inactive: 443996 kB
Active(anon): 7944 kB
Inactive(anon): 86980 kB
Active(file): 6152 kB
Inactive(file): 357016 kB
Unevictable: 4952 kB
Mlocked: 4952 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 4736 kB
Mapped: 5024 kB
Shmem: 91572 kB
Slab: 38928 kB
SReclaimable: 20052 kB
SUnreclaim: 18876 kB
KernelStack: 1448 kB
PageTables: 660 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 1012344 kB
Committed_AS: 100504 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 9184 kB
VmallocChunk: 34359728763 kB
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 49152 kB
DirectMap2M: 2039808 kB
Waiting for init.late [ OK ]
PING build.dumpdata.com (192.168.102.1) 56(84) bytes of data.
--- build.dumpdata.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 1ms
rtt min/avg/max/mdev = 0.303/0.303/0.303/0.000 ms
[ 8.135473] mount.nfs (2505) used greatest stack depth: 2768 bytes left
NFS done
libxl: error: libxl.c:87:libxl_ctx_alloc: Is xenstore daemon running?
failed to stat /var/run/xenstored.pid: No such file or directory
cannot init xl context
[ 8.164452] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 8.175591] device-mapper: multipath: version 1.5.1 loaded
No matching physical volumes found
No volume groups found
8 May 16:02:34 ntpdate[2524]: step time server 17.171.4.14 offset -0.507791 sec
Wed May 8 16:02:35 UTC 2013
Starting net testcase..
May 8 16:02:35 (none) init: starting pid 2541, tty '/dev/tty0': '/bin/sh'
BusyBox v1.14.3 (2013-05-05 20:35:32 EDT) built-in shell (ash)
Enter 'help' for a list of built-in commands.
May 8 16:02:35 (none) init: starting pid 2542, tty '/dev/tty1': '/bin/sh'
May 8 16:02:35 (none) init: starting pid 2543, tty '/dev/ttyS0': '/bin/sh'
May 8 16:02:35 (none) init: starting pid 2544, tty '/dev/hvc0': '/bin/sh'
Running Iperf Server as a daemon
Starting netserver at port 12865
The Iperf daemon process ID : 2545
Starting netserver at hostname 0.0.0.0 port 12865 and family AF_UNSPEC
# May 8 16:02:36 (none) init: process '/bin/sh' (pid 2544) exited. Scheduling for restart.
May 8 16:02:36 (none) init: starting pid 2547, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:37 (none) init: process '/bin/sh' (pid 2547) exited. Scheduling for restart.
May 8 16:02:37 (none) init: starting pid 2548, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:38 (none) init: process '/bin/sh' (pid 2548) exited. Scheduling for restart.
May 8 16:02:38 (none) init: starting pid 2549, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:39 (none) init: process '/bin/sh' (pid 2549) exited. Scheduling for restart.
May 8 16:02:39 (none) init: starting pid 2550, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:40 (none) init: process '/bin/sh' (pid 2550) exited. Scheduling for restart.
May 8 16:02:40 (none) init: starting pid 2551, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:41 (none) init: process '/bin/sh' (pid 2551) exited. Scheduling for restart.
May 8 16:02:41 (none) init: starting pid 2552, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:42 (none) init: process '/bin/sh' (pid 2552) exited. Scheduling for restart.
May 8 16:02:42 (none) init: starting pid 2553, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:43 (none) init: process '/bin/sh' (pid 2553) exited. Scheduling for restart.
May 8 16:02:43 (none) init: starting pid 2554, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:44 (none) init: process '/bin/sh' (pid 2554) exited. Scheduling for restart.
May 8 16:02:44 (none) init: starting pid 2555, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:45 (none) init: process '/bin/sh' (pid 2555) exited. Scheduling for restart.
May 8 16:02:45 (none) init: starting pid 2556, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:46 (none) init: process '/bin/sh' (pid 2556) exited. Scheduling for restart.
May 8 16:02:46 (none) init: starting pid 2557, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:47 (none) init: process '/bin/sh' (pid 2557) exited. Scheduling for restart.
May 8 16:02:47 (none) init: starting pid 2558, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:48 (none) init: process '/bin/sh' (pid 2558) exited. Scheduling for restart.
May 8 16:02:48 (none) init: starting pid 2559, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:49 (none) init: process '/bin/sh' (pid 2559) exited. Scheduling for restart.
May 8 16:02:49 (none) init: starting pid 2560, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:50 (none) init: process '/bin/sh' (pid 2560) exited. Scheduling for restart.
May 8 16:02:50 (none) init: starting pid 2561, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:51 (none) init: process '/bin/sh' (pid 2561) exited. Scheduling for restart.
May 8 16:02:51 (none) init: starting pid 2562, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:52 (none) init: process '/bin/sh' (pid 2562) exited. Scheduling for restart.
May 8 16:02:52 (none) init: starting pid 2563, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:53 (none) init: process '/bin/sh' (pid 2563) exited. Scheduling for restart.
May 8 16:02:53 (none) init: starting pid 2564, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:54 (none) init: process '/bin/sh' (pid 2564) exited. Scheduling for restart.
May 8 16:02:54 (none) init: starting pid 2565, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:55 (none) init: process '/bin/sh' (pid 2565) exited. Scheduling for restart.
May 8 16:02:55 (none) init: starting pid 2566, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:56 (none) init: process '/bin/sh' (pid 2566) exited. Scheduling for restart.
May 8 16:02:56 (none) init: starting pid 2567, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:57 (none) init: process '/bin/sh' (pid 2567) exited. Scheduling for restart.
May 8 16:02:57 (none) init: starting pid 2568, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:58 (none) init: process '/bin/sh' (pid 2568) exited. Scheduling for restart.
May 8 16:02:58 (none) init: starting pid 2569, tty '/dev/hvc0': '/bin/sh'
May 8 16:02:59 (none) init: process '/bin/sh' (pid 2569) exited. Scheduling for restart.
May 8 16:02:59 (none) init: starting pid 2570, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:00 (none) init: process '/bin/sh' (pid 2570) exited. Scheduling for restart.
May 8 16:03:00 (none) init: starting pid 2571, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:01 (none) init: process '/bin/sh' (pid 2571) exited. Scheduling for restart.
May 8 16:03:01 (none) init: starting pid 2572, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:02 (none) init: process '/bin/sh' (pid 2572) exited. Scheduling for restart.
May 8 16:03:02 (none) init: starting pid 2573, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:03 (none) init: process '/bin/sh' (pid 2573) exited. Scheduling for restart.
May 8 16:03:03 (none) init: starting pid 2574, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:04 (none) init: process '/bin/sh' (pid 2574) exited. Scheduling for restart.
May 8 16:03:04 (none) init: starting pid 2575, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:05 (none) init: process '/bin/sh' (pid 2575) exited. Scheduling for restart.
May 8 16:03:05 (none) init: starting pid 2576, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:06 (none) init: process '/bin/sh' (pid 2576) exited. Scheduling for restart.
May 8 16:03:06 (none) init: starting pid 2577, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:07 (none) init: process '/bin/sh' (pid 2577) exited. Scheduling for restart.
May 8 16:03:07 (none) init: starting pid 2578, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:08 (none) init: process '/bin/sh' (pid 2578) exited. Scheduling for restart.
May 8 16:03:08 (none) init: starting pid 2579, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:09 (none) init: process '/bin/sh' (pid 2579) exited. Scheduling for restart.
May 8 16:03:09 (none) init: starting pid 2580, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:10 (none) init: process '/bin/sh' (pid 2580) exited. Scheduling for restart.
May 8 16:03:10 (none) init: starting pid 2581, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:11 (none) init: process '/bin/sh' (pid 2581) exited. Scheduling for restart.
May 8 16:03:11 (none) init: starting pid 2582, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:12 (none) init: process '/bin/sh' (pid 2582) exited. Scheduling for restart.
May 8 16:03:12 (none) init: starting pid 2583, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:13 (none) init: process '/bin/sh' (pid 2583) exited. Scheduling for restart.
May 8 16:03:13 (none) init: starting pid 2584, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:14 (none) init: process '/bin/sh' (pid 2584) exited. Scheduling for restart.
May 8 16:03:14 (none) init: starting pid 2585, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:15 (none) init: process '/bin/sh' (pid 2585) exited. Scheduling for restart.
May 8 16:03:15 (none) init: starting pid 2586, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:16 (none) init: process '/bin/sh' (pid 2586) exited. Scheduling for restart.
May 8 16:03:16 (none) init: starting pid 2587, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:17 (none) init: process '/bin/sh' (pid 2587) exited. Scheduling for restart.
May 8 16:03:17 (none) init: starting pid 2588, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:18 (none) init: process '/bin/sh' (pid 2588) exited. Scheduling for restart.
May 8 16:03:18 (none) init: starting pid 2589, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:19 (none) init: process '/bin/sh' (pid 2589) exited. Scheduling for restart.
May 8 16:03:19 (none) init: starting pid 2590, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:20 (none) init: process '/bin/sh' (pid 2590) exited. Scheduling for restart.
May 8 16:03:20 (none) init: starting pid 2591, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:21 (none) init: process '/bin/sh' (pid 2591) exited. Scheduling for restart.
May 8 16:03:21 (none) init: starting pid 2592, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:22 (none) init: process '/bin/sh' (pid 2592) exited. Scheduling for restart.
May 8 16:03:22 (none) init: starting pid 2593, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:23 (none) init: process '/bin/sh' (pid 2593) exited. Scheduling for restart.
May 8 16:03:23 (none) init: starting pid 2594, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:24 (none) init: process '/bin/sh' (pid 2594) exited. Scheduling for restart.
May 8 16:03:24 (none) init: starting pid 2595, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:25 (none) init: process '/bin/sh' (pid 2595) exited. Scheduling for restart.
May 8 16:03:25 (none) init: starting pid 2596, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:26 (none) init: process '/bin/sh' (pid 2596) exited. Scheduling for restart.
May 8 16:03:26 (none) init: starting pid 2597, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:27 (none) init: process '/bin/sh' (pid 2597) exited. Scheduling for restart.
May 8 16:03:27 (none) init: starting pid 2598, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:28 (none) init: process '/bin/sh' (pid 2598) exited. Scheduling for restart.
May 8 16:03:28 (none) init: starting pid 2599, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:29 (none) init: process '/bin/sh' (pid 2599) exited. Scheduling for restart.
May 8 16:03:29 (none) init: starting pid 2600, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:30 (none) init: process '/bin/sh' (pid 2600) exited. Scheduling for restart.
May 8 16:03:30 (none) init: starting pid 2601, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:31 (none) init: process '/bin/sh' (pid 2601) exited. Scheduling for restart.
May 8 16:03:31 (none) init: starting pid 2602, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:32 (none) init: process '/bin/sh' (pid 2602) exited. Scheduling for restart.
May 8 16:03:32 (none) init: starting pid 2603, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:33 (none) init: process '/bin/sh' (pid 2603) exited. Scheduling for restart.
May 8 16:03:33 (none) init: starting pid 2604, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:34 (none) init: process '/bin/sh' (pid 2604) exited. Scheduling for restart.
May 8 16:03:34 (none) init: starting pid 2605, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:35 (none) init: process '/bin/sh' (pid 2605) exited. Scheduling for restart.
May 8 16:03:35 (none) init: starting pid 2606, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:36 (none) init: process '/bin/sh' (pid 2606) exited. Scheduling for restart.
May 8 16:03:36 (none) init: starting pid 2607, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:37 (none) init: process '/bin/sh' (pid 2607) exited. Scheduling for restart.
May 8 16:03:37 (none) init: starting pid 2608, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:38 (none) init: process '/bin/sh' (pid 2608) exited. Scheduling for restart.
May 8 16:03:38 (none) init: starting pid 2609, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:39 (none) init: process '/bin/sh' (pid 2609) exited. Scheduling for restart.
May 8 16:03:39 (none) init: starting pid 2610, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:40 (none) init: process '/bin/sh' (pid 2610) exited. Scheduling for restart.
May 8 16:03:40 (none) init: starting pid 2611, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:41 (none) init: process '/bin/sh' (pid 2611) exited. Scheduling for restart.
May 8 16:03:41 (none) init: starting pid 2612, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:42 (none) init: process '/bin/sh' (pid 2612) exited. Scheduling for restart.
May 8 16:03:42 (none) init: starting pid 2613, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:43 (none) init: process '/bin/sh' (pid 2613) exited. Scheduling for restart.
May 8 16:03:43 (none) init: starting pid 2614, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:44 (none) init: process '/bin/sh' (pid 2614) exited. Scheduling for restart.
May 8 16:03:44 (none) init: starting pid 2615, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:45 (none) init: process '/bin/sh' (pid 2615) exited. Scheduling for restart.
May 8 16:03:45 (none) init: starting pid 2616, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:46 (none) init: process '/bin/sh' (pid 2616) exited. Scheduling for restart.
May 8 16:03:46 (none) init: starting pid 2617, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:47 (none) init: process '/bin/sh' (pid 2617) exited. Scheduling for restart.
May 8 16:03:47 (none) init: starting pid 2618, tty '/dev/hvc0': '/bin/sh'
May 8 16:03:48 (none) udevd-work[2153]: error opening ATTR{/sys/devices/system/cpu/cpu1/online} for writing: No such file or directory
[ 84.585905] CPU 1 got hotplugged
[ 84.590192] installing Xen timer for CPU 1
[ 84.596371] SMP alternatives: lockdep: fixing up alternatives
[ 84.603560] SMP alternatives: switching to SMP code
[ 84.619508] smpboot: Booting Node 0 Processor 1 APIC 0x8
[ 84.639766] ------------[ cut here ]------------
[ 84.639766] WARNING: at /home/konrad/ssd/konrad/linux/arch/x86/xen/time.c:336 xen_vcpuop_set_mode+0xc2/0xd0()
[ 84.639766] Hardware name: HVM domU
[ 84.639766] VCPUOP_stop_singleshot_timer on CPU1 ret: -22
[ 84.639766] Modules linked in: dm_multipath dm_mod iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c sg sr_mod cdrom ata_generic crc32c_intel ata_piix libata scsi_mod xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs xen_privcmd
[ 84.639766] Pid: 0, comm: swapper/1 Not tainted 3.9.0upstream-00022-g49c1bf1-dirty #6
[ 84.639766] Call Trace:
[ 84.639766] [<ffffffff8109261a>] warn_slowpath_common+0x7a/0xc0
[ 84.639766] [<ffffffff81092701>] warn_slowpath_fmt+0x41/0x50
[ 84.639766] [<ffffffff810e8ae4>] ? tick_notify+0x114/0x420
[ 84.639766] [<ffffffff81044fe2>] xen_vcpuop_set_mode+0xc2/0xd0
[ 84.639766] [<ffffffff810e8385>] clockevents_set_mode+0x25/0x70
[ 84.639766] [<ffffffff810e83e6>] clockevents_shutdown+0x16/0x30
[ 84.639766] [<ffffffff810e84b7>] clockevents_exchange_device+0xb7/0x110
[ 84.639766] [<ffffffff810e8ae4>] ? tick_notify+0x114/0x420
[ 84.639766] [<ffffffff810e8b99>] tick_notify+0x1c9/0x420
[ 84.639766] [<ffffffff810e8221>] ? clockevents_register_device+0x31/0x170
[ 84.639766] [<ffffffff8169dddd>] notifier_call_chain+0x4d/0x70
[ 84.639766] [<ffffffff810be851>] raw_notifier_call_chain+0x11/0x20
[ 84.639766] [<ffffffff810e82d0>] clockevents_register_device+0xe0/0x170
[ 84.639766] [<ffffffff8104507c>] xen_setup_cpu_clockevents+0x2c/0x50
[ 84.639766] [<ffffffff810450b6>] xen_hvm_setup_cpu_clockevents+0x16/0x20
[ 84.639766] [<ffffffff8168d4af>] start_secondary+0x1ea/0x1f9
[ 84.639766] ---[ end trace f218984223a7067d ]---
[ 84.639766] ------------[ cut here ]------------
[ 84.639766] WARNING: at /home/konrad/ssd/konrad/linux/arch/x86/xen/time.c:338 xen_vcpuop_set_mode+0x9f/0xd0()
[ 84.639766] Hardware name: HVM domU
[ 84.639766] VCPUOP_stop_periodic_timer on CPU1 ret: -22
[ 84.639766] Modules linked in: dm_multipath dm_mod iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c sg sr_mod cdrom ata_generic crc32c_intel ata_piix libata scsi_mod xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs xen_privcmd
[ 84.639766] Pid: 0, comm: swapper/1 Tainted: G W 3.9.0upstream-00022-g49c1bf1-dirty #6
[ 84.639766] Call Trace:
[ 84.639766] [<ffffffff8109261a>] warn_slowpath_common+0x7a/0xc0
[ 84.639766] [<ffffffff81092701>] warn_slowpath_fmt+0x41/0x50
[ 84.639766] [<ffffffff810e8ae4>] ? tick_notify+0x114/0x420
[ 84.639766] [<ffffffff81044fbf>] xen_vcpuop_set_mode+0x9f/0xd0
[ 84.639766] [<ffffffff810e8385>] clockevents_set_mode+0x25/0x70
[ 84.639766] [<ffffffff810e83e6>] clockevents_shutdown+0x16/0x30
[ 84.639766] [<ffffffff810e84b7>] clockevents_exchange_device+0xb7/0x110
[ 84.639766] [<ffffffff810e8ae4>] ? tick_notify+0x114/0x420
[ 84.639766] [<ffffffff810e8b99>] tick_notify+0x1c9/0x420
[ 84.639766] [<ffffffff810e8221>] ? clockevents_register_device+0x31/0x170
[ 84.639766] [<ffffffff8169dddd>] notifier_call_chain+0x4d/0x70
[ 84.639766] [<ffffffff810be851>] raw_notifier_call_chain+0x11/0x20
[ 84.639766] [<ffffffff810e82d0>] clockevents_register_device+0xe0/0x170
[ 84.639766] [<ffffffff8104507c>] xen_setup_cpu_clockevents+0x2c/0x50
[ 84.639766] [<ffffffff810450b6>] xen_hvm_setup_cpu_clockevents+0x16/0x20
[ 84.639766] [<ffffffff8168d4af>] start_secondary+0x1ea/0x1f9
[ 84.639766] ---[ end trace f218984223a7067e ]---
[ 84.639766] ------------[ cut here ]------------
[ 84.639766] kernel BUG at /home/konrad/ssd/konrad/linux/arch/x86/xen/time.c:340!
[ 84.639766] invalid opcode: 0000 [#1] SMP
[ 84.639766] Modules linked in: dm_multipath dm_mod iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c sg sr_mod cdrom ata_generic crc32c_intel ata_piix libata scsi_mod xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs xen_privcmd
[ 84.639766] CPU 1
[ 84.639766] Pid: 0, comm: swapper/1 Tainted: G W 3.9.0upstream-00022-g49c1bf1-dirty #6 Xen HVM domU
[ 84.639766] RIP: 0010:[<ffffffff81044fbf>] [<ffffffff81044fbf>] xen_vcpuop_set_mode+0x9f/0xd0
[ 84.639766] RSP: 0000:ffff880073c6bd98 EFLAGS: 00010092
[ 84.639766] RAX: 0000000000000024 RBX: 0000000000000001 RCX: 0000000000000000
[ 84.639766] RDX: ffff880073c68300 RSI: 0000000000000000 RDI: 0000000000000009
[ 84.639766] RBP: ffff880073c6bdb8 R08: 0000000000000001 R09: 0000000000000000
[ 84.639766] R10: 0000000000000258 R11: 0000000000000000 R12: 00000000ffffffea
[ 84.639766] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000082
[ 84.639766] FS: 0000000000000000(0000) GS:ffff880074220000(0000) knlGS:0000000000000000
[ 84.639766] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 84.639766] CR2: 0000000000000000 CR3: 0000000001c0c000 CR4: 00000000000406e0
[ 84.639766] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 84.639766] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 84.639766] Process swapper/1 (pid: 0, threadinfo ffff880073c6a000, task ffff880073c68300)
[ 84.639766] Stack:
[ 84.639766] 0000000000000000 ffff88007422be40 0000000000000001 0000000000000082
[ 84.639766] ffff880073c6bdd8 ffffffff810e8385 ffff88007422be40 ffff88007422be40
[ 84.639766] ffff880073c6bdf8 ffffffff810e83e6 ffff880073c6bdf8 0000000000000000
[ 84.639766] Call Trace:
[ 84.639766] [<ffffffff810e8385>] clockevents_set_mode+0x25/0x70
[ 84.639766] [<ffffffff810e83e6>] clockevents_shutdown+0x16/0x30
[ 84.639766] [<ffffffff810e84b7>] clockevents_exchange_device+0xb7/0x110
[ 84.639766] [<ffffffff810e8ae4>] ? tick_notify+0x114/0x420
[ 84.639766] [<ffffffff810e8b99>] tick_notify+0x1c9/0x420
[ 84.639766] [<ffffffff810e8221>] ? clockevents_register_device+0x31/0x170
[ 84.639766] [<ffffffff8169dddd>] notifier_call_chain+0x4d/0x70
[ 84.639766] [<ffffffff810be851>] raw_notifier_call_chain+0x11/0x20
[ 84.639766] [<ffffffff810e82d0>] clockevents_register_device+0xe0/0x170
[ 84.639766] [<ffffffff8104507c>] xen_setup_cpu_clockevents+0x2c/0x50
[ 84.639766] [<ffffffff810450b6>] xen_hvm_setup_cpu_clockevents+0x16/0x20
[ 84.639766] [<ffffffff8168d4af>] start_secondary+0x1ea/0x1f9
[ 84.639766] Code: 00 48 c7 c7 f8 bc 9b 81 e8 bf d6 04 00 eb c9 89 d9 48 c7 c2 98 bd 9b 81 be 52 01 00 00 48 c7 c7 f8 bc 9b 81 31 c0 e8 01 d7 04 00 <0f> 0b eb fe 41 89 c0 89 d9 48 c7 c2 68 bd 9b 81 be 50 01 00 00
[ 84.639766] RIP [<ffffffff81044fbf>] xen_vcpuop_set_mode+0x9f/0xd0
[ 84.639766] RSP <ffff880073c6bd98>
[ 84.639766] ---[ end trace f218984223a7067f ]---
[ 84.639766] Kernel panic - not syncing: Attempted to kill the idle task!
Parsing config from /mnt/lab/latest/vm.cfg
Daemon running with PID 7341
next prev parent reply other threads:[~2013-06-04 14:22 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <519131D8.9010307@citrix.com>
2013-05-13 18:52 ` FreeBSD PVHVM call for testing Michael Sierchio
[not found] ` <CAHu1Y73xuFqAQL99rTJL0_LGFNsdafcDd0sTpyg9DYjAgmf_jQ@mail.gmail.com>
2013-05-13 18:59 ` Colin Percival
[not found] ` <51913821.4040104@freebsd.org>
2013-05-13 19:08 ` Michael Sierchio
[not found] ` <CAHu1Y727R0KW-MfrfNf1_jjuZhCTq+8=dJidNmRZ29i2iKPQ+w@mail.gmail.com>
2013-05-13 19:13 ` Colin Percival
2013-05-14 9:19 ` George Dunlap
[not found] ` <CAFLBxZZ1eNf2UoHf1NvWd_cfomSChr0LDYyfFcXpYROg8RNC8Q@mail.gmail.com>
2013-05-14 15:56 ` Dario Faggioli
2013-05-16 18:55 ` Colin Percival
[not found] ` <51952BAE.6010609@freebsd.org>
2013-05-17 0:43 ` Roger Pau Monné
[not found] ` <51957D42.9060801@citrix.com>
2013-05-17 3:07 ` Colin Percival
[not found] ` <51959ED9.6040405@freebsd.org>
2013-05-18 9:50 ` Roger Pau Monné
[not found] ` <51974EC9.9030204@citrix.com>
2013-05-18 15:44 ` Colin Percival
[not found] ` <5197A1EA.2040404@freebsd.org>
2013-05-22 11:45 ` Roger Pau Monné
[not found] ` <519CAFC7.1070908@citrix.com>
2013-05-22 20:03 ` Colin Percival
[not found] ` <519D24A9.3050407@freebsd.org>
2013-05-23 9:06 ` Roger Pau Monné
[not found] ` <519DDC0A.9000201@citrix.com>
2013-05-23 19:09 ` Colin Percival
[not found] ` <519E6958.6020606@freebsd.org>
2013-05-24 10:11 ` Roger Pau Monné
[not found] ` <519F3CD0.5090405@citrix.com>
2013-05-28 16:15 ` Roger Pau Monné
[not found] ` <51A4D804.9050208@citrix.com>
2013-05-28 19:18 ` Matt Wilson
[not found] ` <20130528191855.GA13736@u109add4315675089e695.ant.amazon.com>
2013-05-28 21:33 ` Colin Percival
[not found] ` <51A5229F.80205@freebsd.org>
2013-05-29 17:03 ` Roger Pau Monné
[not found] ` <51A634EC.7050805@citrix.com>
2013-05-29 17:22 ` Matt Wilson
2013-05-29 17:25 ` [Xen-users] " Ian Campbell
2013-05-29 18:24 ` Konrad Rzeszutek Wilk
2013-05-30 9:26 ` Ian Campbell
2013-05-29 22:10 ` Matt Wilson
2013-05-30 9:31 ` Ian Campbell
2013-05-30 17:16 ` Matt Wilson
2013-05-31 8:21 ` HVM CPU enumeration, mapping to VCPU ID (Was: Re: [Xen-users] FreeBSD PVHVM call for testing) Ian Campbell
2013-05-31 18:53 ` Matt Wilson
2013-06-03 14:44 ` Konrad Rzeszutek Wilk
2013-06-03 15:57 ` Matt Wilson
2013-06-03 17:33 ` Konrad Rzeszutek Wilk
2013-06-03 18:23 ` Matt Wilson
2013-06-04 14:22 ` Konrad Rzeszutek Wilk [this message]
2013-06-05 16:15 ` Matt Wilson
2013-06-05 19:10 ` Konrad Rzeszutek Wilk
2013-08-09 13:54 ` Konrad Rzeszutek Wilk
[not found] ` <20130529172201.GA20973@u109add4315675089e695.ant.amazon.com>
2013-05-29 17:45 ` FreeBSD PVHVM call for testing Roger Pau Monné
[not found] ` <51A63EB3.5090007@citrix.com>
2013-05-29 20:58 ` Colin Percival
[not found] ` <51A66C13.7060203@freebsd.org>
2013-05-29 22:19 ` Matt Wilson
[not found] ` <20130529221920.GC20973@u109add4315675089e695.ant.amazon.com>
2013-05-30 1:10 ` Colin Percival
2013-05-21 17:40 ` Konrad Rzeszutek Wilk
2013-05-22 11:41 ` Roger Pau Monné
[not found] ` <519CAECE.9040706@citrix.com>
2013-05-22 12:21 ` Konrad Rzeszutek Wilk
2013-05-22 15:27 ` Yuriy Kohut
2013-05-23 12:57 ` Jeroen van der Ham
2013-05-23 13:20 ` Jeroen van der Ham
[not found] ` <647F6650-AEED-4784-8A45-98324860EE0A@dckd.nl>
2013-05-23 13:30 ` Roger Pau Monné
[not found] ` <519E1A0C.3070609@citrix.com>
2013-05-24 22:27 ` Craig Rodrigues
[not found] ` <CAG=rPVeWnTdhXucg-KRjgSRLfTCz5bRNdkTGQX7ug2Bu2qJkiQ@mail.gmail.com>
2013-05-28 15:21 ` Outback Dingo
[not found] ` <CAKYr3zyu-zppwsy9RDOGXj+cc1Xt76hzwB0S1LnfZnhCLpxL=g@mail.gmail.com>
2013-05-28 22:05 ` Craig Rodrigues
2013-05-28 22:43 ` Outback Dingo
[not found] ` <CAKYr3zwbdtw4s+jUMNQJCc1P3S=T_b1k2M_QK8=FQKieDa7Uhg@mail.gmail.com>
2013-05-28 23:09 ` Craig Rodrigues
[not found] ` <CAG=rPVeZKSbWRd0egjZpvJghUsK6rXVr+wwL-u7LAoeKMNpozQ@mail.gmail.com>
2013-05-28 23:20 ` Outback Dingo
[not found] ` <CAKYr3zzqgii5G8xw2yQtgxEXaa38Ww4hibxMcCCVCtJZ7PGgew@mail.gmail.com>
2013-05-29 17:07 ` Justin T. Gibbs
[not found] ` <616EE8A8-78BA-46E6-90AA-4A22160289DF@dckd.nl>
2013-05-23 13:02 ` Outback Dingo
2013-05-23 13:33 ` Roger Pau Monné
[not found] ` <519E1AA6.2060808@citrix.com>
2013-05-23 15:02 ` Outback Dingo
2013-05-23 16:30 ` Outback Dingo
[not found] ` <CAKYr3zyB-9FOUwAgbq19rMNoxb5XEzHP5Wa0RiiGYJ_XcG7VbA@mail.gmail.com>
2013-05-23 16:48 ` Sergey Kandaurov
2013-05-23 16:48 ` Roger Pau Monné
[not found] ` <519E4850.1090305@citrix.com>
2013-05-23 17:02 ` Outback Dingo
[not found] ` <CAKYr3zxJMdhMCu-A0epLekLw+sLAWjSUR7UB7jHo0zfG_QfaRQ@mail.gmail.com>
2013-05-23 17:22 ` Jeroen van der Ham
[not found] ` <0BBCBA0B-F4A6-4775-A172-D051D9363665@dckd.nl>
2013-05-23 17:29 ` Outback Dingo
2013-05-23 17:41 ` Roger Pau Monné
2013-05-23 23:24 ` Outback Dingo
[not found] ` <7C420745-BAC0-4BD0-AB60-E3BC7F8BA2A7@onapp.com>
2013-05-24 8:34 ` Yuriy Kohut
[not found] ` <519E54DE.5090304@citrix.com>
2013-05-24 14:14 ` Konrad Rzeszutek Wilk
[not found] ` <20130524141400.GB3900@phenom.dumpdata.com>
2013-05-24 14:16 ` Outback Dingo
2013-05-24 14:21 ` Roger Pau Monné
2013-05-24 22:21 ` Craig Rodrigues
[not found] ` <CAG=rPVfoyHOzN5qZPn9YAfR2QPnLxBMVJBLv2abg7CMtdPWHJA@mail.gmail.com>
2013-05-28 13:42 ` Konrad Rzeszutek Wilk
2013-05-30 8:50 ` Jeroen van der Ham
[not found] ` <6B8B9354-AF52-4081-B67B-04565D1BCE99@dckd.nl>
2013-05-30 9:04 ` Roger Pau Monné
[not found] ` <51A71616.4060508@citrix.com>
2013-05-30 9:15 ` Jeroen van der Ham
[not found] ` <ED94B614-A210-4D0B-A60B-8022C30BB0F1@dckd.nl>
2013-05-30 14:56 ` Outback Dingo
[not found] ` <CAKYr3zxo0-BOBQuJk_qY2=kbxnMyMR7gffEzoVL+YuTmj-Trdg@mail.gmail.com>
2013-05-30 15:10 ` Jeroen van der Ham
2013-06-10 14:48 ` Roger Pau Monné
[not found] ` <51B5E730.6070007@citrix.com>
2013-06-10 15:09 ` Outback Dingo
[not found] ` <CAKYr3zxhqvpaL-G0L9220zbRY7D_ZQ+9DZ4MKKGiKtsWvPw3RA@mail.gmail.com>
2013-06-10 15:16 ` Roger Pau Monné
2013-06-13 17:20 ` Roger Pau Monné
[not found] ` <51B9FF53.2020901@citrix.com>
2013-06-19 11:13 ` Jeroen van der Ham
[not found] ` <2C70BC9B-5964-498F-AAE2-E5024160E3E5@dckd.nl>
2013-06-19 11:34 ` Roger Pau Monné
[not found] ` <51C1972B.50703@citrix.com>
2013-06-19 12:16 ` Jeroen van der Ham
[not found] ` <C4BE5FBE-DF19-404F-B478-0F33D716454F@dckd.nl>
2013-06-19 12:20 ` Roger Pau Monné
[not found] ` <51C1A223.6030305@citrix.com>
2013-06-19 12:33 ` Jeroen van der Ham
[not found] ` <6E99C9B2-E28D-4793-81C2-97440AC5AD0E@dckd.nl>
2013-06-19 12:44 ` Roger Pau Monné
[not found] ` <51C1A7AA.2010307@citrix.com>
2013-06-19 16:07 ` Jeroen van der Ham
[not found] ` <B6D2239B-86D0-4B1B-A357-63F6E5A18284@dckd.nl>
2013-06-19 16:15 ` Justin T. Gibbs
[not found] ` <BB38EA9B-54E4-43CD-AF49-7B480DC50BFF@freebsd.org>
2013-06-19 16:50 ` Jeroen van der Ham
[not found] ` <546D0358-4F92-4E8C-AED0-94FC5D36086F@dckd.nl>
2013-06-19 16:52 ` Justin T. Gibbs
[not found] ` <E8150505-ECA0-4CB6-B777-A41334B8B903@FreeBSD.org>
2013-06-19 20:03 ` Jeroen van der Ham
2013-06-20 9:20 ` Jeroen van der Ham
[not found] ` <54560214-F170-426E-BDF9-2295D8B8E982@dckd.nl>
2013-06-20 9:33 ` Roger Pau Monné
[not found] ` <51C2CC63.9070505@citrix.com>
2013-06-20 9:37 ` Jeroen van der Ham
2013-07-22 7:18 ` Jeroen van der Ham
[not found] ` <4A595D02-7B79-4C6C-9356-55FA9E45EDDC@dckd.nl>
2013-07-22 8:29 ` Roger Pau Monné
[not found] ` <51ECED83.9020905@citrix.com>
2013-07-22 8:40 ` Jeroen van der Ham
[not found] ` <A1FE7DDA-7C0D-4456-A754-65CBCA81232D@dckd.nl>
2013-07-22 10:40 ` Roger Pau Monné
2013-07-22 16:23 ` Jeroen van der Ham
2013-10-11 9:42 ` Eggert, Lars
[not found] ` <7BE1E0BE-C4E8-4706-8751-23A30D733A94@netapp.com>
2013-10-11 13:56 ` Roger Pau Monné
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130604142224.GC7110@phenom.dumpdata.com \
--to=konrad.wilk@oracle.com \
--cc=Ian.Campbell@citrix.com \
--cc=keir@xen.org \
--cc=msw@amazon.com \
--cc=roger.pau@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.