From: "Steinar H. Gunderson" <sgunderson@bigfoot.com>
To: linux-kernel@vger.kernel.org
Subject: NULL pointer dereference when loading the gre module (3.10.0-rc4)
Date: Fri, 7 Jun 2013 00:16:56 +0200 [thread overview]
Message-ID: <20130606221656.GA11475@uio.no> (raw)
Hi,
In 3.10.0-rc4, I get this on boot:
[ 16.871043] BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
[ 16.879453] IP: [<ffffffffa0e52002>] 0xffffffffa0e52001
[ 16.884995] PGD 0
[ 16.887313] Oops: 0000 [#1] SMP
[ 16.890904] Modules linked in: ip_gre(+) gre ip_tunnel psmouse ide_generic ide_gd_mod ide_cd_mod cdrom acpi_cpufreq mperf coretemp kvm_intel kvm iTCO_wdt iTCO_vendor_support i2c_i801 microcode lpc_ich pcspkr i2c_core mfd_core ehci_pci evbug evdev ext4 crc16 jbd2 mbcache dm_mod raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq raid1 md_mod sg sd_mod usbhid ide_pci_generic ide_core crc32c_intel e1000e ata_piix ptp pps_core uhci_hcd ehci_hcd mpt2sas raid_class unix
[ 16.939181] CPU: 0 PID: 3261 Comm: modprobe Not tainted 3.10.0-rc4 #1
[ 16.945873] Hardware name: Supermicro X8DTL/X8DTL, BIOS 2.1a 12/30/2011
[ 16.953252] task: ffff880621662d60 ti: ffff8806227de000 task.ti: ffff8806227de000
[ 16.961184] RIP: 0010:[<ffffffffa0e52002>] [<ffffffffa0e52002>] 0xffffffffa0e52001
[ 16.969346] RSP: 0018:ffff8806227dfca8 EFLAGS: 00010246
[ 16.974903] RAX: ffffffffa0e5d000 RBX: ffff880623ebe280 RCX: 0000000000000000
[ 16.982285] RDX: ffffffffa0e5aa40 RSI: 0000000000000003 RDI: ffffffffa0e5d018
[ 16.989674] RBP: ffff8806227dfca8 R08: 000000000000072f R09: ffffffff812bae96
[ 16.997051] R10: ffffea00188d1200 R11: 0000000000000000 R12: ffff88061f874900
[ 17.004440] R13: ffffffffa0e5a9c0 R14: ffff8806227dfef8 R15: 0000000000000002
[ 17.011818] FS: 00007f7da1d97700(0000) GS:ffff880627200000(0000) knlGS:0000000000000000
[ 17.020357] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 17.026349] CR2: 0000000000000003 CR3: 0000000621b84000 CR4: 00000000000007f0
[ 17.033734] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 17.041110] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 17.048494] Stack:
[ 17.050757] ffff8806227dfcf8 ffffffff812baf26 2222222222222222 2222222222222222
[ 17.058857] 2222222222222222 ffffffffa0e5a9c0 0000000000000000 0000000000000000
[ 17.066933] ffff8806227dfef8 ffffffffa0e5ab60 ffff8806227dfd28 ffffffff812bafb6
[ 17.075008] Call Trace:
[ 17.077703] [<ffffffff812baf26>] ops_init.constprop.7+0xc6/0xf5
[ 17.083956] [<ffffffff812bafb6>] register_pernet_operations.isra.4+0x61/0x91
[ 17.091340] [<ffffffff8138486f>] ? mutex_lock+0xf/0x20
[ 17.096822] [<ffffffff812bb006>] register_pernet_device+0x20/0x51
[ 17.103254] [<ffffffffa0e5d034>] ? ipgre_tap_init_net+0x1a/0x1a [ip_gre]
[ 17.110298] [<ffffffffa0e5d055>] ipgre_init+0x21/0xc9 [ip_gre]
[ 17.116470] [<ffffffffa0e5d034>] ? ipgre_tap_init_net+0x1a/0x1a [ip_gre]
[ 17.123515] [<ffffffff81000263>] do_one_initcall+0x7b/0x10c
[ 17.129422] [<ffffffff8107e5db>] load_module+0x1b1f/0x1e19
[ 17.135241] [<ffffffff8107a4f8>] ? sys_getegid16+0x44/0x44
[ 17.141058] [<ffffffff81386cf2>] ? page_fault+0x22/0x30
[ 17.146618] [<ffffffff8107e969>] SyS_init_module+0x94/0xa1
[ 17.152440] [<ffffffff8138cf12>] system_call_fastpath+0x16/0x1b
[ 17.158695] Code: <6e> 65 77 6c 69 6e 6b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.168440] RIP [<ffffffffa0e52002>] 0xffffffffa0e52001
[ 17.174058] RSP <ffff8806227dfca8>
[ 17.177798] CR2: 0000000000000003
[ 17.181730] ---[ end trace 531fea804a54bcad ]---
I assume this is from loading ip_gre, given that it's somewhere in the call
stack; amazingly enough, GRE tunnels seem to actually still work, though,
although I cannot load other modules such as ip_tables (modprobe hangs).
/* Steinar */
--
Homepage: http://www.sesse.net/
next reply other threads:[~2013-06-06 22:17 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-06 22:16 Steinar H. Gunderson [this message]
2013-06-07 3:06 ` NULL pointer dereference when loading the gre module (3.10.0-rc4) Steven Rostedt
2013-06-07 3:59 ` Eric Dumazet
2013-06-07 8:31 ` Steinar H. Gunderson
2013-06-13 10:01 ` David Miller
2013-06-07 8:27 ` Steinar H. Gunderson
2013-06-07 8:43 ` Steinar H. Gunderson
2013-06-07 8:54 ` Steinar H. Gunderson
2013-06-07 13:40 ` Eric Dumazet
2013-06-07 15:15 ` Steven Rostedt
2013-06-07 15:46 ` Steinar H. Gunderson
2013-06-07 16:12 ` Steven Rostedt
2013-06-07 17:52 ` Steinar H. Gunderson
2013-06-07 18:26 ` Steven Rostedt
2013-06-07 18:34 ` Steinar H. Gunderson
2013-06-07 18:44 ` Steven Rostedt
2013-06-07 18:46 ` Steinar H. Gunderson
2013-06-07 20:26 ` Eric Dumazet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130606221656.GA11475@uio.no \
--to=sgunderson@bigfoot.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.