From: Eliezer Tamir <eliezer.tamir@linux.intel.com>
To: David Miller <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Don Skidmore <donald.c.skidmore@intel.com>,
e1000-devel@lists.sourceforge.net,
Willem de Bruijn <willemb@google.com>,
Eric Dumazet <erdnetdev@gmail.com>,
Ben Hutchings <bhutchings@solarflare.com>,
Andi Kleen <andi@firstfloor.org>, HPA <hpa@zytor.com>,
Eilon Greenstien <eilong@broadcom.com>,
Or Gerlitz <or.gerlitz@gmail.com>,
Amir Vadai <amirv@mellanox.com>,
Eliezer Tamir <eliezer@tamir.org.il>
Subject: [PATCH v10 net-next 6/6] ixgbe: add extra stats for ndo_ll_poll
Date: Mon, 10 Jun 2013 11:40:31 +0300 [thread overview]
Message-ID: <20130610084030.6955.89381.stgit@ladj378.jer.intel.com> (raw)
In-Reply-To: <20130610083929.6955.87206.stgit@ladj378.jer.intel.com>
Add additional statistics to the ixgbe driver for ndo_ll_poll
Defined under LL_EXTENDED_STATS
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe.h | 14 ++++++++
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 40 ++++++++++++++++++++++
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 6 +++
3 files changed, 60 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index e9d9862..fb098b4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -54,6 +54,9 @@
#include <net/ll_poll.h>
+#ifdef CONFIG_NET_LL_RX_POLL
+#define LL_EXTENDED_STATS
+#endif
/* common prefix used by pr_<> macros */
#undef pr_fmt
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -184,6 +187,11 @@ struct ixgbe_rx_buffer {
struct ixgbe_queue_stats {
u64 packets;
u64 bytes;
+#ifdef LL_EXTENDED_STATS
+ u64 yields;
+ u64 misses;
+ u64 cleaned;
+#endif /* LL_EXTENDED_STATS */
};
struct ixgbe_tx_queue_stats {
@@ -391,6 +399,9 @@ static inline bool ixgbe_qv_lock_napi(struct ixgbe_q_vector *q_vector)
WARN_ON(q_vector->state & IXGBE_QV_STATE_NAPI);
q_vector->state |= IXGBE_QV_STATE_NAPI_YIELD;
rc = false;
+#ifdef LL_EXTENDED_STATS
+ q_vector->tx.ring->stats.yields++;
+#endif
} else
/* we don't care if someone yielded */
q_vector->state = IXGBE_QV_STATE_NAPI;
@@ -421,6 +432,9 @@ static inline bool ixgbe_qv_lock_poll(struct ixgbe_q_vector *q_vector)
if ((q_vector->state & IXGBE_QV_LOCKED)) {
q_vector->state |= IXGBE_QV_STATE_POLL_YIELD;
rc = false;
+#ifdef LL_EXTENDED_STATS
+ q_vector->rx.ring->stats.yields++;
+#endif
} else
/* preserve yield marks */
q_vector->state |= IXGBE_QV_STATE_POLL;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index d375472..24e2e7a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -1054,6 +1054,12 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
data[i] = 0;
data[i+1] = 0;
i += 2;
+#ifdef LL_EXTENDED_STATS
+ data[i] = 0;
+ data[i+1] = 0;
+ data[i+2] = 0;
+ i += 3;
+#endif
continue;
}
@@ -1063,6 +1069,12 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
data[i+1] = ring->stats.bytes;
} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
i += 2;
+#ifdef LL_EXTENDED_STATS
+ data[i] = ring->stats.yields;
+ data[i+1] = ring->stats.misses;
+ data[i+2] = ring->stats.cleaned;
+ i += 3;
+#endif
}
for (j = 0; j < IXGBE_NUM_RX_QUEUES; j++) {
ring = adapter->rx_ring[j];
@@ -1070,6 +1082,12 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
data[i] = 0;
data[i+1] = 0;
i += 2;
+#ifdef LL_EXTENDED_STATS
+ data[i] = 0;
+ data[i+1] = 0;
+ data[i+2] = 0;
+ i += 3;
+#endif
continue;
}
@@ -1079,6 +1097,12 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
data[i+1] = ring->stats.bytes;
} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
i += 2;
+#ifdef LL_EXTENDED_STATS
+ data[i] = ring->stats.yields;
+ data[i+1] = ring->stats.misses;
+ data[i+2] = ring->stats.cleaned;
+ i += 3;
+#endif
}
for (j = 0; j < IXGBE_MAX_PACKET_BUFFERS; j++) {
@@ -1115,12 +1139,28 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
p += ETH_GSTRING_LEN;
sprintf(p, "tx_queue_%u_bytes", i);
p += ETH_GSTRING_LEN;
+#ifdef LL_EXTENDED_STATS
+ sprintf(p, "tx_q_%u_napi_yield", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_q_%u_misses", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_q_%u_cleaned", i);
+ p += ETH_GSTRING_LEN;
+#endif /* LL_EXTENDED_STATS */
}
for (i = 0; i < IXGBE_NUM_RX_QUEUES; i++) {
sprintf(p, "rx_queue_%u_packets", i);
p += ETH_GSTRING_LEN;
sprintf(p, "rx_queue_%u_bytes", i);
p += ETH_GSTRING_LEN;
+#ifdef LL_EXTENDED_STATS
+ sprintf(p, "rx_q_%u_ll_poll_yield", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_q_%u_misses", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_q_%u_cleaned", i);
+ p += ETH_GSTRING_LEN;
+#endif /* LL_EXTENDED_STATS */
}
for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) {
sprintf(p, "tx_pb_%u_pxon", i);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 9a7dc40..047ebaa 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2016,6 +2016,12 @@ static int ixgbe_low_latency_recv(struct napi_struct *napi)
ixgbe_for_each_ring(ring, q_vector->rx) {
found = ixgbe_clean_rx_irq(q_vector, ring, 4);
+#ifdef LL_EXTENDED_STATS
+ if (found)
+ ring->stats.cleaned += found;
+ else
+ ring->stats.misses++;
+#endif
if (found)
break;
}
next prev parent reply other threads:[~2013-06-10 8:40 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-10 8:39 [PATCH v10 net-next 0/6] net: low latency Ethernet device polling Eliezer Tamir
2013-06-10 8:39 ` [PATCH v10 net-next 1/6] net: add napi_id and hash Eliezer Tamir
2013-06-10 9:22 ` Eric Dumazet
2013-06-10 16:38 ` Willem de Bruijn
2013-06-10 8:39 ` [PATCH v10 net-next 2/6] net: add low latency socket poll Eliezer Tamir
2013-06-10 14:29 ` Eric Dumazet
2013-06-10 16:36 ` Willem de Bruijn
2013-06-10 8:40 ` [PATCH v10 net-next 3/6] udp: add low latency socket poll support Eliezer Tamir
2013-06-10 14:31 ` Eric Dumazet
2013-06-10 16:38 ` Willem de Bruijn
2013-06-10 8:40 ` [PATCH v10 net-next 4/6] tcp: " Eliezer Tamir
2013-06-10 14:32 ` Eric Dumazet
2013-06-10 16:38 ` Willem de Bruijn
2013-06-10 8:40 ` [PATCH v10 net-next 5/6] ixgbe: add support for ndo_ll_poll Eliezer Tamir
2013-06-10 14:59 ` Eric Dumazet
2013-06-11 21:40 ` Keller, Jacob E
2013-06-10 8:40 ` Eliezer Tamir [this message]
2013-06-10 20:41 ` [PATCH v10 net-next 0/6] net: low latency Ethernet device polling David Miller
2013-06-11 2:25 ` Eliezer Tamir
2013-06-11 4:24 ` David Miller
2013-06-11 6:49 ` Eliezer Tamir
2013-06-11 7:32 ` Eric Dumazet
2013-06-11 9:29 ` Eliezer Tamir
2013-06-11 8:14 ` David Miller
2013-06-11 12:49 ` Eliezer Tamir
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130610084030.6955.89381.stgit@ladj378.jer.intel.com \
--to=eliezer.tamir@linux.intel.com \
--cc=amirv@mellanox.com \
--cc=andi@firstfloor.org \
--cc=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=donald.c.skidmore@intel.com \
--cc=e1000-devel@lists.sourceforge.net \
--cc=eilong@broadcom.com \
--cc=eliezer@tamir.org.il \
--cc=erdnetdev@gmail.com \
--cc=hpa@zytor.com \
--cc=jesse.brandeburg@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=or.gerlitz@gmail.com \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.