From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Re: Linux 3.9.6
Date: Thu, 13 Jun 2013 10:55:16 -0700 [thread overview]
Message-ID: <20130613175516.GB9768@kroah.com> (raw)
In-Reply-To: <20130613175502.GA9768@kroah.com>
diff --git a/Makefile b/Makefile
index 8818c95..4a40307 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
VERSION = 3
PATCHLEVEL = 9
-SUBLEVEL = 5
+SUBLEVEL = 6
EXTRAVERSION =
-NAME = Unicycling Gorilla
+NAME = Black Squirrel Wakeup Call
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index afed28e..27f3604 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -121,7 +121,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all -DZIMAGE
+asflags-y := -DZIMAGE
# Supply kernel BSS size to the decompressor via a linker symbol.
KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 6179d94..3115e31 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -11,6 +11,7 @@
#include <asm/mach-types.h>
.section ".start", "ax"
+ .arch armv4
__SA1100_start:
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
index 089c560..92b5689 100644
--- a/arch/arm/boot/compressed/head-shark.S
+++ b/arch/arm/boot/compressed/head-shark.S
@@ -18,6 +18,7 @@
.section ".start", "ax"
+ .arch armv4
b __beginning
__ofw_data: .long 0 @ the number of memory blocks
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fe4d9c3..6938559 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -11,6 +11,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
+ .arch armv7-a
/*
* Debugging stuff
*
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
index 968c0a1..209e650 100644
--- a/arch/arm/include/asm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
@@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off)
static inline unsigned long __my_cpu_offset(void)
{
unsigned long off;
- /* Read TPIDRPRW */
- asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory");
+ register unsigned long *sp asm ("sp");
+
+ /*
+ * Read TPIDRPRW.
+ * We want to allow caching the value, so avoid using volatile and
+ * instead use a fake stack read to hazard against barrier().
+ */
+ asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp));
+
return off;
}
#define __my_cpu_offset __my_cpu_offset()
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 79282eb..606b9538 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -13,6 +13,7 @@
#include <linux/cpu.h>
#include <linux/cpumask.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/node.h>
@@ -200,6 +201,7 @@ static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
* cpu topology table
*/
struct cputopo_arm cpu_topology[NR_CPUS];
+EXPORT_SYMBOL_GPL(cpu_topology);
const struct cpumask *cpu_coregroup_mask(int cpu)
{
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index acb0187..4695d5f 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -41,13 +41,3 @@ void __init qnap_dt_ts219_init(void)
pm_power_off = qnap_tsx1x_power_off;
}
-
-/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */
-static int __init ts219_pci_init(void)
-{
- if (machine_is_ts219())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(ts219_pci_init);
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index fb3245e..6e11f78 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -175,6 +175,7 @@ extern const char *powerpc_base_platform;
#define CPU_FTR_BCTAR LONG_ASM_CONST(0x0100000000000000)
#define CPU_FTR_HAS_PPR LONG_ASM_CONST(0x0200000000000000)
#define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000)
+#define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000)
#ifndef __ASSEMBLY__
@@ -391,19 +392,20 @@ extern const char *powerpc_base_platform;
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_201 | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \
CPU_FTR_CP_USE_DCBTZ | CPU_FTR_STCX_CHECKS_ADDRESS | \
- CPU_FTR_HVMODE)
+ CPU_FTR_HVMODE | CPU_FTR_DABRX)
#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_PURR | \
- CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB)
+ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_DABRX)
#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \
- CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR)
+ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR | \
+ CPU_FTR_DABRX)
#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -412,7 +414,7 @@ extern const char *powerpc_base_platform;
CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | \
- CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR)
+ CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR | CPU_FTR_DABRX)
#define CPU_FTRS_POWER8 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -427,14 +429,15 @@ extern const char *powerpc_base_platform;
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_PAUSE_ZERO | CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
- CPU_FTR_UNALIGNED_LD_STD)
+ CPU_FTR_UNALIGNED_LD_STD | CPU_FTR_DABRX)
#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_PURR | CPU_FTR_REAL_LE)
+ CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_DABRX)
#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
#define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \
- CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | CPU_FTR_ICSWX)
+ CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | \
+ CPU_FTR_ICSWX | CPU_FTR_DABRX )
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 3d6b410..ccfe2c8 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -29,6 +29,7 @@ struct rtc_time;
struct file;
struct pci_controller;
struct kimage;
+struct pci_host_bridge;
struct machdep_calls {
char *name;
@@ -107,6 +108,8 @@ struct machdep_calls {
void (*pcibios_fixup)(void);
int (*pci_probe_mode)(struct pci_bus *);
void (*pci_irq_fixup)(struct pci_dev *dev);
+ int (*pcibios_root_bridge_prepare)(struct pci_host_bridge
+ *bridge);
/* To setup PHBs when using automatic OF platform driver for PCI */
int (*pci_setup_phb)(struct pci_controller *host);
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 025a130..bb21f5a 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -154,6 +154,8 @@ struct pci_dn {
int pci_ext_config_space; /* for pci devices */
+ int force_32bit_msi:1;
+
struct pci_dev *pcidev; /* back-pointer to the pci device */
#ifdef CONFIG_EEH
struct eeh_dev *edev; /* eeh device */
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index fa12ae4..9b315e5 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -30,6 +30,7 @@
#include <linux/irq.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/vgaarb.h>
#include <asm/processor.h>
#include <asm/io.h>
@@ -844,6 +845,14 @@ int pci_proc_domain(struct pci_bus *bus)
return 1;
}
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ if (ppc_md.pcibios_root_bridge_prepare)
+ return ppc_md.pcibios_root_bridge_prepare(bridge);
+
+ return 0;
+}
+
/* This header fixup will do the resource fixup for all devices as they are
* probed, but not for bridge ranges
*/
@@ -1725,3 +1734,15 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
+
+static void fixup_vga(struct pci_dev *pdev)
+{
+ u16 cmd;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device())
+ vga_set_default_device(pdev);
+
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_DISPLAY_VGA, 8, fixup_vga);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 16e77a8..9600c36 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -392,7 +392,8 @@ static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
{
mtspr(SPRN_DABR, dabr);
- mtspr(SPRN_DABRX, dabrx);
+ if (cpu_has_feature(CPU_FTR_DABRX))
+ mtspr(SPRN_DABRX, dabrx);
return 0;
}
#else
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 1c22b2d..29857c6 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1151,7 +1151,7 @@ void alignment_exception(struct pt_regs *regs)
local_irq_enable();
if (tm_abort_check(regs, TM_CAUSE_ALIGNMENT | TM_CAUSE_PERSISTENT))
- goto bail;
+ return;
/* we don't implement logging of alignment exceptions */
if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS))
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 65362e9..9d858b0 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1528,7 +1528,7 @@ static void perf_event_interrupt(struct pt_regs *regs)
}
}
}
- if ((!found) && printk_ratelimit())
+ if (!found && !nmi && printk_ratelimit())
printk(KERN_WARNING "Can't find PMC that caused IRQ\n");
/*
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 19506f9..b456b15 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -83,7 +83,11 @@ static int pseries_eeh_init(void)
ibm_configure_pe = rtas_token("ibm,configure-pe");
ibm_configure_bridge = rtas_token("ibm,configure-bridge");
- /* necessary sanity check */
+ /*
+ * Necessary sanity check. We needn't check "get-config-addr-info"
+ * and its variant since the old firmware probably support address
+ * of domain/bus/slot/function for EEH RTAS operations.
+ */
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) {
pr_warning("%s: RTAS service <ibm,set-eeh-option> invalid\n",
__func__);
@@ -102,12 +106,6 @@ static int pseries_eeh_init(void)
pr_warning("%s: RTAS service <ibm,slot-error-detail> invalid\n",
__func__);
return -EINVAL;
- } else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE &&
- ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) {
- pr_warning("%s: RTAS service <ibm,get-config-addr-info2> and "
- "<ibm,get-config-addr-info> invalid\n",
- __func__);
- return -EINVAL;
} else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE &&
ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) {
pr_warning("%s: RTAS service <ibm,configure-pe> and "
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index e5b0847..77b18a2 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -24,6 +24,7 @@ static int query_token, change_token;
#define RTAS_RESET_FN 2
#define RTAS_CHANGE_MSI_FN 3
#define RTAS_CHANGE_MSIX_FN 4
+#define RTAS_CHANGE_32MSI_FN 5
static struct pci_dn *get_pdn(struct pci_dev *pdev)
{
@@ -58,7 +59,8 @@ static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs)
seq_num = 1;
do {
- if (func == RTAS_CHANGE_MSI_FN || func == RTAS_CHANGE_MSIX_FN)
+ if (func == RTAS_CHANGE_MSI_FN || func == RTAS_CHANGE_MSIX_FN ||
+ func == RTAS_CHANGE_32MSI_FN)
rc = rtas_call(change_token, 6, 4, rtas_ret, addr,
BUID_HI(buid), BUID_LO(buid),
func, num_irqs, seq_num);
@@ -392,6 +394,25 @@ static int check_msix_entries(struct pci_dev *pdev)
return 0;
}
+static void rtas_hack_32bit_msi_gen2(struct pci_dev *pdev)
+{
+ u32 addr_hi, addr_lo;
+ int pos;
+
+ /*
+ * We should only get in here for IODA1 configs. This is based on the
+ * fact that we using RTAS for MSIs, we don't have the 32 bit MSI RTAS
+ * support, and we are in a PCIe Gen2 slot.
+ */
+ dev_info(&pdev->dev,
+ "rtas_msi: No 32 bit MSI firmware support, forcing 32 bit MSI\n");
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_HI, &addr_hi);
+ addr_lo = 0xffff0000 | ((addr_hi >> (48 - 32)) << 4);
+ pci_write_config_dword(pdev, pos + PCI_MSI_ADDRESS_LO, addr_lo);
+ pci_write_config_dword(pdev, pos + PCI_MSI_ADDRESS_HI, 0);
+}
+
static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type)
{
struct pci_dn *pdn;
@@ -399,6 +420,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type)
struct msi_desc *entry;
struct msi_msg msg;
int nvec = nvec_in;
+ int use_32bit_msi_hack = 0;
pdn = get_pdn(pdev);
if (!pdn)
@@ -426,12 +448,31 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type)
*/
again:
if (type == PCI_CAP_ID_MSI) {
- rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec);
+ if (pdn->force_32bit_msi) {
+ rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec);
+ if (rc < 0) {
+ /*
+ * We only want to run the 32 bit MSI hack below if
+ * the max bus speed is Gen2 speed
+ */
+ if (pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT)
+ return rc;
+
+ use_32bit_msi_hack = 1;
+ }
+ } else
+ rc = -1;
+
+ if (rc < 0)
+ rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec);
if (rc < 0) {
pr_debug("rtas_msi: trying the old firmware call.\n");
rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec);
}
+
+ if (use_32bit_msi_hack && rc > 0)
+ rtas_hack_32bit_msi_gen2(pdev);
} else
rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec);
@@ -512,3 +553,13 @@ static int rtas_msi_init(void)
return 0;
}
arch_initcall(rtas_msi_init);
+
+static void quirk_radeon(struct pci_dev *dev)
+{
+ struct pci_dn *pdn = get_pdn(dev);
+
+ if (pdn)
+ pdn->force_32bit_msi = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon);
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 0b580f4..5f93856 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -108,3 +108,56 @@ static void fixup_winbond_82c105(struct pci_dev* dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
fixup_winbond_82c105);
+
+int pseries_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct device_node *dn, *pdn;
+ struct pci_bus *bus;
+ const uint32_t *pcie_link_speed_stats;
+
+ bus = bridge->bus;
+
+ dn = pcibios_get_phb_of_node(bus);
+ if (!dn)
+ return 0;
+
+ for (pdn = dn; pdn != NULL; pdn = of_get_next_parent(pdn)) {
+ pcie_link_speed_stats = (const uint32_t *) of_get_property(pdn,
+ "ibm,pcie-link-speed-stats", NULL);
+ if (pcie_link_speed_stats)
+ break;
+ }
+
+ of_node_put(pdn);
+
+ if (!pcie_link_speed_stats) {
+ pr_err("no ibm,pcie-link-speed-stats property\n");
+ return 0;
+ }
+
+ switch (pcie_link_speed_stats[0]) {
+ case 0x01:
+ bus->max_bus_speed = PCIE_SPEED_2_5GT;
+ break;
+ case 0x02:
+ bus->max_bus_speed = PCIE_SPEED_5_0GT;
+ break;
+ default:
+ bus->max_bus_speed = PCI_SPEED_UNKNOWN;
+ break;
+ }
+
+ switch (pcie_link_speed_stats[1]) {
+ case 0x01:
+ bus->cur_bus_speed = PCIE_SPEED_2_5GT;
+ break;
+ case 0x02:
+ bus->cur_bus_speed = PCIE_SPEED_5_0GT;
+ break;
+ default:
+ bus->cur_bus_speed = PCI_SPEED_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 9a3dda0..b79393d 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -60,4 +60,8 @@ extern int dlpar_detach_node(struct device_node *);
/* Snooze Delay, pseries_idle */
DECLARE_PER_CPU(long, smt_snooze_delay);
+/* PCI root bridge prepare function override for pseries */
+struct pci_host_bridge;
+int pseries_root_bridge_prepare(struct pci_host_bridge *bridge);
+
#endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 8bcc9ca..bf34cc9 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -466,6 +466,8 @@ static void __init pSeries_setup_arch(void)
else
ppc_md.enable_pmcs = power4_enable_pmcs;
+ ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;
+
if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
long rc;
if ((rc = pSeries_enable_reloc_on_exc()) != H_SUCCESS) {
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index fd80015..39a1c71 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -1063,11 +1063,12 @@ static inline pte_t ptep_modify_prot_start(struct mm_struct *mm,
unsigned long address,
pte_t *ptep)
{
+ pgste_t pgste;
pte_t pte;
mm->context.flush_mm = 1;
if (mm_has_pgste(mm))
- pgste_get_lock(ptep);
+ pgste = pgste_get_lock(ptep);
pte = *ptep;
if (!mm_exclusive(mm))
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 901177d..1dc3d7c 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -617,7 +617,9 @@ int pcibios_add_device(struct pci_dev *dev)
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- data = phys_to_virt(pa_data);
+ data = ioremap(pa_data, sizeof(*rom));
+ if (!data)
+ return -ENOMEM;
if (data->type == SETUP_PCI) {
rom = (struct pci_setup_rom *)data;
@@ -634,6 +636,7 @@ int pcibios_add_device(struct pci_dev *dev)
}
}
pa_data = data->next;
+ iounmap(data);
}
return 0;
}
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 22c800a..96c4e85 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -17,6 +17,7 @@
#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/irq_work.h>
+#include <linux/tick.h>
#include <asm/paravirt.h>
#include <asm/desc.h>
@@ -436,6 +437,13 @@ static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
cpu_bringup();
+ /*
+ * commit 4b0c0f294 (tick: Cleanup NOHZ per cpu data on cpu down)
+ * clears certain data that the cpu_idle loop (which called us
+ * and that we return from) expects. The only way to get that
+ * data back is to call:
+ */
+ tick_nohz_idle_enter();
}
#else /* !CONFIG_HOTPLUG_CPU */
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 557e58d..391010a 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -269,11 +269,13 @@ int acpi_bus_init_power(struct acpi_device *device)
if (result)
return result;
} else if (state == ACPI_STATE_UNKNOWN) {
- /* No power resources and missing _PSC? Try to force D0. */
+ /*
+ * No power resources and missing _PSC? Cross fingers and make
+ * it D0 in hope that this is what the BIOS put the device into.
+ * [We tried to force D0 here by executing _PS0, but that broke
+ * Toshiba P870-303 in a nasty way.]
+ */
state = ACPI_STATE_D0;
- result = acpi_dev_pm_explicit_set(device, state);
- if (result)
- return result;
}
device->power.state = state;
return 0;
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 313f959..81a9335 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -447,6 +447,22 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
},
},
+ {
+ .callback = video_ignore_initial_backlight,
+ .ident = "HP Pavilion g6 Notebook PC",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion g6 Notebook PC"),
+ },
+ },
+ {
+ .callback = video_ignore_initial_backlight,
+ .ident = "HP Pavilion m4",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion m4 Notebook PC"),
+ },
+ },
{}
};
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 57a8774..bb5939b 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -347,11 +347,11 @@ static u32 get_cur_val(const struct cpumask *mask)
switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) {
case SYSTEM_INTEL_MSR_CAPABLE:
cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
- cmd.addr.msr.reg = MSR_IA32_PERF_STATUS;
+ cmd.addr.msr.reg = MSR_IA32_PERF_CTL;
break;
case SYSTEM_AMD_MSR_CAPABLE:
cmd.type = SYSTEM_AMD_MSR_CAPABLE;
- cmd.addr.msr.reg = MSR_AMD_PERF_STATUS;
+ cmd.addr.msr.reg = MSR_AMD_PERF_CTL;
break;
case SYSTEM_IO_CAPABLE:
cmd.type = SYSTEM_IO_CAPABLE;
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 1734fee..71bf4ec 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -1566,10 +1566,12 @@ static void dma_tc_handle(struct d40_chan *d40c)
return;
}
- if (d40_queue_start(d40c) == NULL)
+ if (d40_queue_start(d40c) == NULL) {
d40c->busy = false;
- pm_runtime_mark_last_busy(d40c->base->dev);
- pm_runtime_put_autosuspend(d40c->base->dev);
+
+ pm_runtime_mark_last_busy(d40c->base->dev);
+ pm_runtime_put_autosuspend(d40c->base->dev);
+ }
d40_desc_remove(d40d);
d40_desc_done(d40c, d40d);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index a6a8643..8bcce78 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -1054,7 +1054,7 @@ EXPORT_SYMBOL(drm_vblank_off);
*/
void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
{
- /* vblank is not initialized (IRQ not installed ?) */
+ /* vblank is not initialized (IRQ not installed ?), or has been freed */
if (!dev->num_crtcs)
return;
/*
@@ -1076,6 +1076,10 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
{
unsigned long irqflags;
+ /* vblank is not initialized (IRQ not installed ?), or has been freed */
+ if (!dev->num_crtcs)
+ return;
+
if (dev->vblank_inmodeset[crtc]) {
spin_lock_irqsave(&dev->vbl_lock, irqflags);
dev->vblank_disable_allowed = 1;
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index 2590cac..8d07078 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -772,8 +772,8 @@ void psb_modeset_init(struct drm_device *dev)
for (i = 0; i < dev_priv->num_pipe; i++)
psb_intel_crtc_init(dev, i, mode_dev);
- dev->mode_config.max_width = 2048;
- dev->mode_config.max_height = 2048;
+ dev->mode_config.max_width = 4096;
+ dev->mode_config.max_height = 4096;
psb_setup_outputs(dev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 73cb479..db2cff3 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -91,14 +91,11 @@ i915_gem_wait_for_error(struct i915_gpu_error *error)
{
int ret;
-#define EXIT_COND (!i915_reset_in_progress(error))
+#define EXIT_COND (!i915_reset_in_progress(error) || \
+ i915_terminally_wedged(error))
if (EXIT_COND)
return 0;
- /* GPU is already declared terminally dead, give up. */
- if (i915_terminally_wedged(error))
- return -EIO;
-
/*
* Only wait 10 seconds for the gpu reset to complete to avoid hanging
* userspace. If it takes that long something really bad is going on and
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c2d173a..2ab65b4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7960,6 +7960,21 @@ static void intel_set_config_restore_state(struct drm_device *dev,
}
}
+static bool
+is_crtc_connector_off(struct drm_crtc *crtc, struct drm_connector *connectors,
+ int num_connectors)
+{
+ int i;
+
+ for (i = 0; i < num_connectors; i++)
+ if (connectors[i].encoder &&
+ connectors[i].encoder->crtc == crtc &&
+ connectors[i].dpms != DRM_MODE_DPMS_ON)
+ return true;
+
+ return false;
+}
+
static void
intel_set_config_compute_mode_changes(struct drm_mode_set *set,
struct intel_set_config *config)
@@ -7967,7 +7982,11 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
- if (set->crtc->fb != set->fb) {
+ if (set->connectors != NULL &&
+ is_crtc_connector_off(set->crtc, *set->connectors,
+ set->num_connectors)) {
+ config->mode_changed = true;
+ } else if (set->crtc->fb != set->fb) {
/* If we have no fb then treat it as a full mode set */
if (set->crtc->fb == NULL) {
DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
@@ -7979,8 +7998,9 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
} else if (set->fb->bits_per_pixel !=
set->crtc->fb->bits_per_pixel) {
config->mode_changed = true;
- } else
+ } else {
config->fb_changed = true;
+ }
}
if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index e0d6985..e2ca9c1 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -803,10 +803,10 @@ static const struct dmi_system_id intel_no_lvds[] = {
},
{
.callback = intel_no_lvds_dmi_callback,
- .ident = "Hewlett-Packard HP t5740e Thin Client",
+ .ident = "Hewlett-Packard HP t5740",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP t5740e Thin Client"),
+ DMI_MATCH(DMI_PRODUCT_NAME, " t5740"),
},
},
{
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d6df786..cdd78ca 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1770,7 +1770,7 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
* Assume that the preferred modes are
* arranged in priority order.
*/
- intel_ddc_get_modes(connector, intel_sdvo->i2c);
+ intel_ddc_get_modes(connector, &intel_sdvo->ddc);
if (list_empty(&connector->probed_modes) == false)
goto end;
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 713dd70..407e257 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1041,13 +1041,14 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
else
hi_pri_lvl = 5;
- WREG8(0x1fde, 0x06);
- WREG8(0x1fdf, hi_pri_lvl);
+ WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
+ WREG8(MGAREG_CRTCEXT_DATA, hi_pri_lvl);
} else {
+ WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
if (mdev->reg_1e24 >= 0x01)
- WREG8(0x1fdf, 0x03);
+ WREG8(MGAREG_CRTCEXT_DATA, 0x03);
else
- WREG8(0x1fdf, 0x04);
+ WREG8(MGAREG_CRTCEXT_DATA, 0x04);
}
}
return 0;
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 4552d4a..6cf2b52 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -667,6 +667,8 @@ atombios_digital_setup(struct drm_encoder *encoder, int action)
int
atombios_get_encoder_mode(struct drm_encoder *encoder)
{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_connector *connector;
struct radeon_connector *radeon_connector;
@@ -693,7 +695,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */
if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
- radeon_audio)
+ radeon_audio &&
+ !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
return ATOM_ENCODER_MODE_HDMI;
else if (radeon_connector->use_digital)
return ATOM_ENCODER_MODE_DVI;
@@ -704,7 +707,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
case DRM_MODE_CONNECTOR_HDMIA:
default:
if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
- radeon_audio)
+ radeon_audio &&
+ !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
return ATOM_ENCODER_MODE_HDMI;
else
return ATOM_ENCODER_MODE_DVI;
@@ -718,7 +722,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
(dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
return ATOM_ENCODER_MODE_DP;
else if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
- radeon_audio)
+ radeon_audio &&
+ !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
return ATOM_ENCODER_MODE_HDMI;
else
return ATOM_ENCODER_MODE_DVI;
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 0ea6bdf..f8e36ac 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3728,6 +3728,12 @@ static int evergreen_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -3876,10 +3882,6 @@ int evergreen_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
@@ -3944,8 +3946,7 @@ void evergreen_fini(struct radeon_device *rdev)
void evergreen_pcie_gen2_enable(struct radeon_device *rdev)
{
- u32 link_width_cntl, speed_cntl, mask;
- int ret;
+ u32 link_width_cntl, speed_cntl;
if (radeon_pcie_gen2 == 0)
return;
@@ -3960,11 +3961,8 @@ void evergreen_pcie_gen2_enable(struct radeon_device *rdev)
if (ASIC_IS_X2(rdev))
return;
- ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask);
- if (ret != 0)
- return;
-
- if (!(mask & DRM_PCIE_SPEED_50))
+ if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) &&
+ (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT))
return;
speed_cntl = RREG32_PCIE_P(PCIE_LC_SPEED_CNTL);
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 0a32d89..d7968b8 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1711,6 +1711,12 @@ static int cayman_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -1857,10 +1863,6 @@ int cayman_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
ring->ring_obj = NULL;
r600_ring_init(rdev, ring, 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 4973bff..d0314ec 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -3869,6 +3869,12 @@ static int r100_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r100.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -4024,9 +4030,6 @@ int r100_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index c60350e..b9b776f 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -1382,6 +1382,12 @@ static int r300_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -1516,9 +1522,6 @@ int r300_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 6fce2eb..4e796ec 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -265,6 +265,12 @@ static int r420_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -411,10 +417,6 @@ int r420_init(struct radeon_device *rdev)
if (r) {
return r;
}
- r = radeon_irq_kms_init(rdev);
- if (r) {
- return r;
- }
/* Memory manager */
r = radeon_bo_init(rdev);
if (r) {
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index f795a4e..e1aece7 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -194,6 +194,12 @@ static int r520_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -297,9 +303,6 @@ int r520_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 0740db3..bac1e2ac 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2940,6 +2940,12 @@ static int r600_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -3094,10 +3100,6 @@ int r600_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
@@ -4351,8 +4353,6 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev)
{
u32 link_width_cntl, lanes, speed_cntl, training_cntl, tmp;
u16 link_cntl2;
- u32 mask;
- int ret;
if (radeon_pcie_gen2 == 0)
return;
@@ -4371,11 +4371,8 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev)
if (rdev->family <= CHIP_R600)
return;
- ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask);
- if (ret != 0)
- return;
-
- if (!(mask & DRM_PCIE_SPEED_50))
+ if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) &&
+ (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT))
return;
speed_cntl = RREG32_PCIE_P(PCIE_LC_SPEED_CNTL);
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 73051ce..233a9b9 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -417,6 +417,12 @@ static int rs400_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -535,9 +541,6 @@ int rs400_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 46fa1b0..670b555 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -923,6 +923,12 @@ static int rs600_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -1047,9 +1053,6 @@ int rs600_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 5706d2a..fad6633 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -628,6 +628,12 @@ static int rs690_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -753,9 +759,6 @@ int rs690_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index ffcba73..21c7d7b 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -532,6 +532,12 @@ static int rv515_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -662,9 +668,6 @@ int rv515_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index d63fe1d..c872d2b 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1041,6 +1041,12 @@ static int rv770_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -1180,10 +1186,6 @@ int rv770_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
@@ -1238,8 +1240,6 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev)
{
u32 link_width_cntl, lanes, speed_cntl, tmp;
u16 link_cntl2;
- u32 mask;
- int ret;
if (radeon_pcie_gen2 == 0)
return;
@@ -1254,11 +1254,8 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev)
if (ASIC_IS_X2(rdev))
return;
- ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask);
- if (ret != 0)
- return;
-
- if (!(mask & DRM_PCIE_SPEED_50))
+ if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) &&
+ (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT))
return;
DRM_INFO("enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0\n");
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index aefefd5..a964a96 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -4374,6 +4374,12 @@ static int si_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = si_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -4534,10 +4540,6 @@ int si_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
ring = &rdev->ring[RADEON_RING_TYPE_GFX_INDEX];
ring->ring_obj = NULL;
r600_ring_init(rdev, ring, 1024 * 1024);
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 71bcba8a..1468be8 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -332,26 +332,68 @@ static int adm1021_detect(struct i2c_client *client,
man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);
+ if (man_id < 0 || dev_id < 0)
+ return -ENODEV;
+
if (man_id == 0x4d && dev_id == 0x01)
type_name = "max1617a";
else if (man_id == 0x41) {
if ((dev_id & 0xF0) == 0x30)
type_name = "adm1023";
- else
+ else if ((dev_id & 0xF0) == 0x00)
type_name = "adm1021";
+ else
+ return -ENODEV;
} else if (man_id == 0x49)
type_name = "thmc10";
else if (man_id == 0x23)
type_name = "gl523sm";
else if (man_id == 0x54)
type_name = "mc1066";
- /* LM84 Mfr ID in a different place, and it has more unused bits */
- else if (conv_rate == 0x00
- && (config & 0x7F) == 0x00
- && (status & 0xAB) == 0x00)
- type_name = "lm84";
- else
- type_name = "max1617";
+ else {
+ int lte, rte, lhi, rhi, llo, rlo;
+
+ /* extra checks for LM84 and MAX1617 to avoid misdetections */
+
+ llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0));
+ rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1));
+
+ /* fail if any of the additional register reads failed */
+ if (llo < 0 || rlo < 0)
+ return -ENODEV;
+
+ lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0));
+ rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1));
+ lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0));
+ rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1));
+
+ /*
+ * Fail for negative temperatures and negative high limits.
+ * This check also catches read errors on the tested registers.
+ */
+ if ((s8)lte < 0 || (s8)rte < 0 || (s8)lhi < 0 || (s8)rhi < 0)
+ return -ENODEV;
+
+ /* fail if all registers hold the same value */
+ if (lte == rte && lte == lhi && lte == rhi && lte == llo
+ && lte == rlo)
+ return -ENODEV;
+
+ /*
+ * LM84 Mfr ID is in a different place,
+ * and it has more unused bits.
+ */
+ if (conv_rate == 0x00
+ && (config & 0x7F) == 0x00
+ && (status & 0xAB) == 0x00) {
+ type_name = "lm84";
+ } else {
+ /* fail if low limits are larger than high limits */
+ if ((s8)llo > lhi || (s8)rlo > rhi)
+ return -ENODEV;
+ type_name = "max1617";
+ }
+ }
pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
type_name, i2c_adapter_id(adapter), client->addr);
diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c
index a884252..e76d4ac 100644
--- a/drivers/iio/frequency/adf4350.c
+++ b/drivers/iio/frequency/adf4350.c
@@ -212,7 +212,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq)
(pdata->r2_user_settings & (ADF4350_REG2_PD_POLARITY_POS |
ADF4350_REG2_LDP_6ns | ADF4350_REG2_LDF_INT_N |
ADF4350_REG2_CHARGE_PUMP_CURR_uA(5000) |
- ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x9)));
+ ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x3)));
st->regs[ADF4350_REG3] = pdata->r3_user_settings &
(ADF4350_REG3_12BIT_CLKDIV(0xFFF) |
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index b289915..8ff1a2d 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -279,7 +279,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
s64 raw64 = raw;
int ret;
- ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_SCALE);
+ ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET);
if (ret == 0)
raw64 += offset;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 5427787..563771f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -988,7 +988,6 @@ int pci_setup_device(struct pci_dev *dev)
dev->sysdata = dev->bus->sysdata;
dev->dev.parent = dev->bus->bridge;
dev->dev.bus = &pci_bus_type;
- dev->dev.type = &pci_dev_type;
dev->hdr_type = hdr_type & 0x7f;
dev->multifunction = !!(hdr_type & 0x80);
dev->error_state = pci_channel_io_normal;
@@ -1208,6 +1207,7 @@ struct pci_dev *alloc_pci_dev(void)
return NULL;
INIT_LIST_HEAD(&dev->bus_list);
+ dev->dev.type = &pci_dev_type;
return dev;
}
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 1a779bb..72184cc 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -679,7 +679,7 @@ static int hp_wmi_rfkill_setup(struct platform_device *device)
}
rfkill_init_sw_state(gps_rfkill,
hp_wmi_get_sw_state(HPWMI_GPS));
- rfkill_set_hw_state(bluetooth_rfkill,
+ rfkill_set_hw_state(gps_rfkill,
hp_wmi_get_hw_state(HPWMI_GPS));
err = rfkill_register(gps_rfkill);
if (err)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index e8d7768..1e04b79 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -196,9 +196,9 @@ static void dwc3_pci_remove(struct pci_dev *pci)
{
struct dwc3_pci *glue = pci_get_drvdata(pci);
+ platform_device_unregister(glue->dwc3);
platform_device_unregister(glue->usb2_phy);
platform_device_unregister(glue->usb3_phy);
- platform_device_unregister(glue->dwc3);
pci_set_drvdata(pci, NULL);
pci_disable_device(pci);
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 82e160e..bab9630 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1637,10 +1637,20 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
dep = dwc->eps[epnum];
- dwc3_free_trb_pool(dep);
- if (epnum != 0 && epnum != 1)
+ /*
+ * Physical endpoints 0 and 1 are special; they form the
+ * bi-directional USB endpoint 0.
+ *
+ * For those two physical endpoints, we don't allocate a TRB
+ * pool nor do we add them the endpoints list. Due to that, we
+ * shouldn't do these two operations otherwise we would end up
+ * with all sorts of bugs when removing dwc3.ko.
+ */
+ if (epnum != 0 && epnum != 1) {
+ dwc3_free_trb_pool(dep);
list_del(&dep->endpoint.ep_list);
+ }
kfree(dep);
}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 010f686..5a00ef3 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
}
static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
/* carryover low/fullspeed bandwidth that crosses uframe boundries */
static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd26470e428..905f38c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1827,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
spin_unlock_irqrestore(&xhci->lock, flags);
+ if (!xhci->rh_bw)
+ goto no_bw;
+
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
for (i = 0; i < num_ports; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
@@ -1845,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
}
+no_bw:
xhci->num_usb2_ports = 0;
xhci->num_usb3_ports = 0;
xhci->num_active_eps = 0;
@@ -2256,6 +2260,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
u32 page_size, temp;
int i;
+ INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+ INIT_LIST_HEAD(&xhci->cancel_cmd_list);
+
page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
for (i = 0; i < 16; i++) {
@@ -2334,7 +2341,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
if (!xhci->cmd_ring)
goto fail;
- INIT_LIST_HEAD(&xhci->cancel_cmd_list);
xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
(unsigned long long)xhci->cmd_ring->first_seg->dma);
@@ -2445,8 +2451,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
if (xhci_setup_port_arrays(xhci, flags))
goto fail;
- INIT_LIST_HEAD(&xhci->lpm_failed_devs);
-
/* Enable USB 3.0 device notifications for function remote wake, which
* is necessary for allowing USB 3.0 devices to do remote wakeup from
* U3 (device suspend).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1a30c38..cc24e39 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev)
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ /*
+ * Systems with the TI redriver that loses port status change events
+ * need to have the registers polled during D3, so avoid D3cold.
+ */
+ if (xhci_compliance_mode_recovery_timer_quirk_check())
+ pdev->no_d3cold = true;
return xhci_suspend(xhci);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 53b8f89..82b0809 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
* Systems:
* Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
*/
-static bool compliance_mode_recovery_timer_quirk_check(void)
+bool xhci_compliance_mode_recovery_timer_quirk_check(void)
{
const char *dmi_product_name, *dmi_sys_vendor;
@@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd)
xhci_dbg(xhci, "Finished xhci_init\n");
/* Initializing Compliance Mode Recovery Data If Needed */
- if (compliance_mode_recovery_timer_quirk_check()) {
+ if (xhci_compliance_mode_recovery_timer_quirk_check()) {
xhci->quirks |= XHCI_COMP_MODE_QUIRK;
compliance_mode_recovery_timer_init(xhci);
}
@@ -952,6 +952,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct usb_hcd *secondary_hcd;
int retval = 0;
+ bool comp_timer_running = false;
/* Wait a bit if either of the roothubs need to settle from the
* transition into bus suspend.
@@ -989,6 +990,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* If restore operation fails, re-initialize the HC during resume */
if ((temp & STS_SRE) || hibernated) {
+
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ !(xhci_all_ports_seen_u0(xhci))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n");
+ }
+
/* Let the USB core know _both_ roothubs lost power. */
usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
@@ -1031,6 +1039,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
retval = xhci_init(hcd->primary_hcd);
if (retval)
return retval;
+ comp_timer_running = true;
+
xhci_dbg(xhci, "Start the primary HCD\n");
retval = xhci_run(hcd->primary_hcd);
if (!retval) {
@@ -1072,7 +1082,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
* to suffer the Compliance Mode issue again. It doesn't matter if
* ports have entered previously to U0 before system's suspension.
*/
- if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
compliance_mode_recovery_timer_init(xhci);
/* Re-enable port polling. */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6358271..bde9f22 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+/* xHCI quirks */
+bool xhci_compliance_mode_recovery_timer_quirk_check(void);
+
#endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 1ce1fcf..6f26fd8 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1232,7 +1232,6 @@ void musb_host_tx(struct musb *musb, u8 epnum)
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
bool transfer_pending = false;
- static bool use_sg;
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1463,9 +1462,9 @@ done:
* NULL.
*/
if (!urb->transfer_buffer)
- use_sg = true;
+ qh->use_sg = true;
- if (use_sg) {
+ if (qh->use_sg) {
/* sg_miter_start is already done in musb_ep_program */
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
@@ -1484,9 +1483,9 @@ done:
qh->segsize = length;
- if (use_sg) {
+ if (qh->use_sg) {
if (offset + length >= urb->transfer_buffer_length)
- use_sg = false;
+ qh->use_sg = false;
}
musb_ep_select(mbase, epnum);
@@ -1552,7 +1551,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
bool done = false;
u32 status;
struct dma_channel *dma;
- static bool use_sg;
unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG;
musb_ep_select(mbase, epnum);
@@ -1878,12 +1876,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
* NULL.
*/
if (!urb->transfer_buffer) {
- use_sg = true;
+ qh->use_sg = true;
sg_miter_start(&qh->sg_miter, urb->sg, 1,
sg_flags);
}
- if (use_sg) {
+ if (qh->use_sg) {
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
sg_miter_stop(&qh->sg_miter);
@@ -1913,8 +1911,8 @@ finish:
urb->actual_length += xfer_len;
qh->offset += xfer_len;
if (done) {
- if (use_sg)
- use_sg = false;
+ if (qh->use_sg)
+ qh->use_sg = false;
if (urb->status == -EINPROGRESS)
urb->status = status;
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 5a9c8fe..738f7eb 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -74,6 +74,7 @@ struct musb_qh {
u16 frame; /* for periodic schedule */
unsigned iso_idx; /* in urb->iso_frame_desc[] */
struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */
+ bool use_sg; /* to track urb using sglist */
};
/* map from control or bulk queue head to the first qh on that ring */
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 4775f82..513d45f 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -43,7 +43,7 @@
#define DRIVER_NAME "ark3116"
/* usb timeout of 1 second */
-#define ARK_TIMEOUT (1*HZ)
+#define ARK_TIMEOUT 1000
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x6547, 0x0232) },
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index ba7352e..9b145d3 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = {
static const struct usb_device_id id_table_cyphidcomrs232[] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ } /* Terminating entry */
};
@@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
@@ -230,6 +232,12 @@ static struct usb_serial_driver * const serial_drivers[] = {
* Cypress serial helper functions
*****************************************************************************/
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+ return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
{
@@ -239,6 +247,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
if (unstable_bauds)
return new_rate;
+ /* FRWD Dongle uses 115200 bps */
+ if (is_frwd(port->serial->dev))
+ return new_rate;
+
/*
* The general purpose firmware for the Cypress M8 allows for
* a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -449,7 +461,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
return -ENOMEM;
}
- usb_reset_configuration(serial->dev);
+ /* Skip reset for FRWD device. It is a workaound:
+ device hangs if it receives SET_CONFIGURE in Configured
+ state. */
+ if (!is_frwd(serial->dev))
+ usb_reset_configuration(serial->dev);
priv->cmd_ctrl = 0;
priv->line_control = 0;
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 67cf608..b461311 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -24,6 +24,10 @@
#define VENDOR_ID_CYPRESS 0x04b4
#define PRODUCT_ID_CYPHIDCOM 0x5500
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD 0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
+
/* Powercom UPS, chip CY7C63723 */
#define VENDOR_ID_POWERCOM 0x0d9f
#define PRODUCT_ID_UPS 0x0002
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 266ece7..e8e2837 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -931,8 +931,8 @@ static int ftdi_get_icount(struct tty_struct *tty,
static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
-static int ftdi_chars_in_buffer(struct tty_struct *tty);
-static int ftdi_get_modem_status(struct tty_struct *tty,
+static bool ftdi_tx_empty(struct usb_serial_port *port);
+static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2]);
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
@@ -968,7 +968,7 @@ static struct usb_serial_driver ftdi_sio_device = {
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
- .chars_in_buffer = ftdi_chars_in_buffer,
+ .tx_empty = ftdi_tx_empty,
};
static struct usb_serial_driver * const serial_drivers[] = {
@@ -2092,27 +2092,18 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
}
-static int ftdi_chars_in_buffer(struct tty_struct *tty)
+static bool ftdi_tx_empty(struct usb_serial_port *port)
{
- struct usb_serial_port *port = tty->driver_data;
- int chars;
unsigned char buf[2];
int ret;
- chars = usb_serial_generic_chars_in_buffer(tty);
- if (chars)
- goto out;
-
- /* Check if hardware buffer is empty. */
- ret = ftdi_get_modem_status(tty, buf);
+ ret = ftdi_get_modem_status(port, buf);
if (ret == 2) {
if (!(buf[1] & FTDI_RS_TEMT))
- chars = 1;
+ return false;
}
-out:
- dev_dbg(&port->dev, "%s - %d\n", __func__, chars);
- return chars;
+ return true;
}
/* old_termios contains the original termios settings and tty->termios contains
@@ -2304,10 +2295,9 @@ no_c_cflag_changes:
* Returns the number of status bytes retrieved (device dependant), or
* negative error code.
*/
-static int ftdi_get_modem_status(struct tty_struct *tty,
+static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2])
{
- struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
int len;
@@ -2372,7 +2362,7 @@ static int ftdi_tiocmget(struct tty_struct *tty)
unsigned char buf[2];
int ret;
- ret = ftdi_get_modem_status(tty, buf);
+ ret = ftdi_get_modem_status(port, buf);
if (ret < 0)
return ret;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 4c5c23f..7f4342b 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -264,6 +264,37 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
}
EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer);
+void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ unsigned int bps;
+ unsigned long period;
+ unsigned long expire;
+
+ bps = tty_get_baud_rate(tty);
+ if (!bps)
+ bps = 9600; /* B0 */
+ /*
+ * Use a poll-period of roughly the time it takes to send one
+ * character or at least one jiffy.
+ */
+ period = max_t(unsigned long, (10 * HZ / bps), 1);
+ period = min_t(unsigned long, period, timeout);
+
+ dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n",
+ __func__, jiffies_to_msecs(timeout),
+ jiffies_to_msecs(period));
+ expire = jiffies + timeout;
+ while (!port->serial->type->tx_empty(port)) {
+ schedule_timeout_interruptible(period);
+ if (signal_pending(current))
+ break;
+ if (time_after(jiffies, expire))
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent);
+
static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
int index, gfp_t mem_flags)
{
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 38f2489..f26decd 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2033,8 +2033,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
- int ret;
-
if (edge_port == NULL)
return 0;
@@ -2042,16 +2040,22 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
chars = kfifo_len(&edge_port->write_fifo);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- if (!chars) {
- ret = tx_active(edge_port);
- if (ret > 0)
- chars = ret;
- }
-
dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
return chars;
}
+static bool edge_tx_empty(struct usb_serial_port *port)
+{
+ struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+ int ret;
+
+ ret = tx_active(edge_port);
+ if (ret > 0)
+ return false;
+
+ return true;
+}
+
static void edge_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -2622,6 +2626,7 @@ static struct usb_serial_driver edgeport_1port_device = {
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
+ .tx_empty = edge_tx_empty,
.break_ctl = edge_break,
.read_int_callback = edge_interrupt_callback,
.read_bulk_callback = edge_bulk_in_callback,
@@ -2653,6 +2658,7 @@ static struct usb_serial_driver edgeport_2port_device = {
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
+ .tx_empty = edge_tx_empty,
.break_ctl = edge_break,
.read_int_callback = edge_interrupt_callback,
.read_bulk_callback = edge_bulk_in_callback,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index ff77027..5687e26 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -289,7 +289,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
usb_bulk_msg(serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
@@ -309,7 +309,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
usb_bulk_msg(serial->dev,
usb_rcvbulkpipe(serial->dev,
port->bulk_in_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 1fd1935..34ed26e 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1594,7 +1594,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
d_details = s_priv->device_details;
device_port = port->number - port->serial->minor;
- outcont_urb = d_details->outcont_endpoints[port->number];
+ outcont_urb = d_details->outcont_endpoints[device_port];
this_urb = p_priv->outcont_urb;
dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe));
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index e0ebec3..0923689 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -40,7 +40,7 @@
#define DRIVER_DESC "Moschip USB Serial Driver"
/* default urb timeout */
-#define MOS_WDR_TIMEOUT (HZ * 5)
+#define MOS_WDR_TIMEOUT 5000
#define MOS_MAX_PORT 0x02
#define MOS_WRITE 0x0E
@@ -228,11 +228,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
__u8 requesttype = (__u8)0xc0;
__u16 index = get_reg_index(reg);
__u16 value = get_reg_value(reg, serial_portnum);
- int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
- index, data, 1, MOS_WDR_TIMEOUT);
- if (status < 0)
+ u8 *buf;
+ int status;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+ index, buf, 1, MOS_WDR_TIMEOUT);
+ if (status == 1)
+ *data = *buf;
+ else if (status < 0)
dev_err(&usbdev->dev,
"mos7720: usb_control_msg() failed: %d", status);
+ kfree(buf);
+
return status;
}
@@ -1633,7 +1644,7 @@ static void change_port_settings(struct tty_struct *tty,
mos7720_port->shadowMCR |= (UART_MCR_XONANY);
/* To set hardware flow control to the specified *
* serial port, in SP1/2_CONTROL_REG */
- if (port->number)
+ if (port_number)
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
else
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
@@ -1992,7 +2003,7 @@ static int mos7720_startup(struct usb_serial *serial)
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
+ (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
/* start the interrupt urb */
ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
@@ -2035,7 +2046,7 @@ static void mos7720_release(struct usb_serial *serial)
/* wait for synchronous usb calls to return */
if (mos_parport->msg_pending)
wait_for_completion_timeout(&mos_parport->syncmsg_compl,
- MOS_WDR_TIMEOUT);
+ msecs_to_jiffies(MOS_WDR_TIMEOUT));
parport_remove_port(mos_parport->pp);
usb_set_serial_data(serial, NULL);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index b8051fa..2c14a31 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2255,13 +2255,21 @@ static int mos7840_ioctl(struct tty_struct *tty,
static int mos7810_check(struct usb_serial *serial)
{
int i, pass_count = 0;
+ u8 *buf;
__u16 data = 0, mcr_data = 0;
__u16 test_pattern = 0x55AA;
+ int res;
+
+ buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+ if (!buf)
+ return 0; /* failed to identify 7810 */
/* Store MCR setting */
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
- &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ if (res == VENDOR_READ_LENGTH)
+ mcr_data = *buf;
for (i = 0; i < 16; i++) {
/* Send the 1-bit test pattern out to MCS7810 test pin */
@@ -2271,9 +2279,12 @@ static int mos7810_check(struct usb_serial *serial)
MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
/* Read the test pattern back */
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
- VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ res = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ,
+ MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+ VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ if (res == VENDOR_READ_LENGTH)
+ data = *buf;
/* If this is a MCS7810 device, both test patterns must match */
if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
@@ -2287,6 +2298,8 @@ static int mos7810_check(struct usb_serial *serial)
MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
0, MOS_WDR_TIMEOUT);
+ kfree(buf);
+
if (pass_count == 16)
return 1;
@@ -2296,11 +2309,17 @@ static int mos7810_check(struct usb_serial *serial)
static int mos7840_calc_num_ports(struct usb_serial *serial)
{
__u16 data = 0x00;
+ u8 *buf;
int mos7840_num_ports;
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
- VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+ if (buf) {
+ usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+ VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ data = *buf;
+ kfree(buf);
+ }
if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 87181be..9162db2 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -250,13 +250,7 @@ static void option_instat_callback(struct urb *urb);
#define ZTE_PRODUCT_MF622 0x0001
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
-#define ZTE_PRODUCT_CDMA_TECH 0xfffe
-#define ZTE_PRODUCT_AC8710 0xfff1
-#define ZTE_PRODUCT_AC2726 0xfff5
-#define ZTE_PRODUCT_AC8710T 0xffff
#define ZTE_PRODUCT_MC2718 0xffe8
-#define ZTE_PRODUCT_AD3812 0xffeb
-#define ZTE_PRODUCT_MC2716 0xffed
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -495,18 +489,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
.reserved = BIT(4),
};
-static const struct option_blacklist_info zte_ad3812_z_blacklist = {
- .sendsetup = BIT(0) | BIT(1) | BIT(2),
-};
-
static const struct option_blacklist_info zte_mc2718_z_blacklist = {
.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
};
-static const struct option_blacklist_info zte_mc2716_z_blacklist = {
- .sendsetup = BIT(1) | BIT(2) | BIT(3),
-};
-
static const struct option_blacklist_info huawei_cdc12_blacklist = {
.reserved = BIT(1) | BIT(2),
};
@@ -593,6 +579,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */
+ .driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
@@ -797,7 +785,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
- { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
@@ -1199,16 +1186,9 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+ /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 59b32b7..bd794b4 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = {
{USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
{USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */
{USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */
+ {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */
/* non Gobi Qualcomm serial devices */
{USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 5d9b178..42de53c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -379,6 +379,22 @@ static int serial_chars_in_buffer(struct tty_struct *tty)
return count;
}
+static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial = port->serial;
+
+ dev_dbg(tty->dev, "%s\n", __func__);
+
+ if (!port->serial->type->wait_until_sent)
+ return;
+
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ port->serial->type->wait_until_sent(tty, timeout);
+ mutex_unlock(&serial->disc_mutex);
+}
+
static void serial_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -1204,6 +1220,7 @@ static const struct tty_operations serial_ops = {
.unthrottle = serial_unthrottle,
.break_ctl = serial_break,
.chars_in_buffer = serial_chars_in_buffer,
+ .wait_until_sent = serial_wait_until_sent,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
.get_icount = serial_get_icount,
@@ -1329,6 +1346,8 @@ static void fixup_generic(struct usb_serial_driver *device)
set_to_generic_if_null(device, close);
set_to_generic_if_null(device, write_room);
set_to_generic_if_null(device, chars_in_buffer);
+ if (device->tx_empty)
+ set_to_generic_if_null(device, wait_until_sent);
set_to_generic_if_null(device, read_bulk_callback);
set_to_generic_if_null(device, write_bulk_callback);
set_to_generic_if_null(device, disconnect);
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 1129aa7..c24ee17 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -566,10 +566,19 @@ static int treo_attach(struct usb_serial *serial)
*/
#define COPY_PORT(dest, src) \
do { \
+ int i; \
+ \
+ for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \
+ dest->read_urbs[i] = src->read_urbs[i]; \
+ dest->read_urbs[i]->context = dest; \
+ dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \
+ } \
dest->read_urb = src->read_urb; \
dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
dest->bulk_in_buffer = src->bulk_in_buffer; \
+ dest->bulk_in_size = src->bulk_in_size; \
dest->interrupt_in_urb = src->interrupt_in_urb; \
+ dest->interrupt_in_urb->context = dest; \
dest->interrupt_in_endpointAddress = \
src->interrupt_in_endpointAddress;\
dest->interrupt_in_buffer = src->interrupt_in_buffer; \
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index b9fca35..347caad 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty)
struct whiteheat_port_settings port_settings;
unsigned int cflag = tty->termios.c_cflag;
- port_settings.port = port->number + 1;
+ port_settings.port = port->number - port->serial->minor + 1;
/* get the byte size */
switch (cflag & CSIZE) {
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index 39ee737..fca4c75 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
int len;
unsigned char *buf;
- if (port->number != 0)
- return -ENODEV;
-
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -53,7 +50,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0001, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st cmd and recieve data */
@@ -65,7 +62,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 3 cmd */
@@ -84,7 +81,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4 cmd */
@@ -95,7 +92,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 5 cmd */
@@ -107,7 +104,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 6 cmd */
@@ -126,7 +123,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
kfree(buf);
@@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
int len;
unsigned char *buf;
- if (port->number != 0)
- return;
-
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return;
@@ -178,7 +172,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0002, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */
@@ -186,7 +180,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 3st cmd and recieve data */
@@ -198,7 +192,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4 cmd */
@@ -217,7 +211,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 5 cmd */
@@ -228,7 +222,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 6 cmd */
@@ -240,7 +234,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 7 cmd */
@@ -259,7 +253,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 8 cmd */
@@ -270,7 +264,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
kfree(buf);
@@ -279,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
}
static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */
- { USB_DEVICE(0x19d2, 0xfffe) },
- { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */
+ /* AC8710, AC8710T */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
+ /* AC8700 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
+ /* MG880 */
+ { USB_DEVICE(0x19d2, 0xfffd) },
+ { USB_DEVICE(0x19d2, 0xfffc) },
+ { USB_DEVICE(0x19d2, 0xfffb) },
+ /* AC2726, AC8710_V3 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(0x19d2, 0xfff6) },
+ { USB_DEVICE(0x19d2, 0xfff7) },
+ { USB_DEVICE(0x19d2, 0xfff8) },
+ { USB_DEVICE(0x19d2, 0xfff9) },
+ { USB_DEVICE(0x19d2, 0xffee) },
+ /* AC2716, MC2716 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
+ /* AD3812 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(0x19d2, 0xffec) },
{ USB_DEVICE(0x05C6, 0x3197) },
{ USB_DEVICE(0x05C6, 0x6000) },
+ { USB_DEVICE(0x05C6, 0x9008) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 21b3a29..6c4b480 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3332,8 +3332,8 @@ build_unc_path_to_root(const struct smb_vol *vol,
pos = full_path + unc_len;
if (pplen) {
- *pos++ = CIFS_DIR_SEP(cifs_sb);
- strncpy(pos, vol->prepath, pplen);
+ *pos = CIFS_DIR_SEP(cifs_sb);
+ strncpy(pos + 1, vol->prepath, pplen);
pos += pplen;
}
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 63b1f54..3d7fb59 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -294,6 +294,12 @@ static int ecryptfs_release(struct inode *inode, struct file *file)
static int
ecryptfs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
{
+ int rc;
+
+ rc = filemap_write_and_wait(file->f_mapping);
+ if (rc)
+ return rc;
+
return vfs_fsync(ecryptfs_file_to_lower(file), datasync);
}
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index 9f9dbec..5d325c5 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -109,10 +109,14 @@ static void hpfs_write_failed(struct address_space *mapping, loff_t to)
{
struct inode *inode = mapping->host;
+ hpfs_lock(inode->i_sb);
+
if (to > inode->i_size) {
truncate_pagecache(inode, to, inode->i_size);
hpfs_truncate(inode);
}
+
+ hpfs_unlock(inode->i_sb);
}
static int hpfs_write_begin(struct file *file, struct address_space *mapping,
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 1819b59..73afb19 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -267,6 +267,8 @@ struct usb_serial_driver {
struct usb_serial_port *port, struct ktermios *old);
void (*break_ctl)(struct tty_struct *tty, int break_state);
int (*chars_in_buffer)(struct tty_struct *tty);
+ void (*wait_until_sent)(struct tty_struct *tty, long timeout);
+ bool (*tx_empty)(struct usb_serial_port *port);
void (*throttle)(struct tty_struct *tty);
void (*unthrottle)(struct tty_struct *tty);
int (*tiocmget)(struct tty_struct *tty);
@@ -325,6 +327,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port);
extern int usb_serial_generic_resume(struct usb_serial *serial);
extern int usb_serial_generic_write_room(struct tty_struct *tty);
extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
+extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty,
+ long timeout);
extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
extern void usb_serial_generic_throttle(struct tty_struct *tty);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 14d7758..d93dcb1 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -195,8 +195,12 @@ void local_bh_enable_ip(unsigned long ip)
EXPORT_SYMBOL(local_bh_enable_ip);
/*
- * We restart softirq processing for at most 2 ms,
- * and if need_resched() is not set.
+ * We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
+ * but break the loop if need_resched() is set or after 2 ms.
+ * The MAX_SOFTIRQ_TIME provides a nice upper bound in most cases, but in
+ * certain cases, such as stop_machine(), jiffies may cease to
+ * increment and so we need the MAX_SOFTIRQ_RESTART limit as
+ * well to make sure we eventually return from this method.
*
* These limits have been established via experimentation.
* The two things to balance is latency against fairness -
@@ -204,6 +208,7 @@ EXPORT_SYMBOL(local_bh_enable_ip);
* should not be able to lock up the box.
*/
#define MAX_SOFTIRQ_TIME msecs_to_jiffies(2)
+#define MAX_SOFTIRQ_RESTART 10
asmlinkage void __do_softirq(void)
{
@@ -212,6 +217,7 @@ asmlinkage void __do_softirq(void)
unsigned long end = jiffies + MAX_SOFTIRQ_TIME;
int cpu;
unsigned long old_flags = current->flags;
+ int max_restart = MAX_SOFTIRQ_RESTART;
/*
* Mask out PF_MEMALLOC s current task context is borrowed for the
@@ -265,7 +271,8 @@ restart:
pending = local_softirq_pending();
if (pending) {
- if (time_before(jiffies, end) && !need_resched())
+ if (time_before(jiffies, end) && !need_resched() &&
+ --max_restart)
goto restart;
wakeup_softirqd();
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 9a0bc98..183df62 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -826,6 +826,14 @@ static int timekeeping_suspend(void)
read_persistent_clock(&timekeeping_suspend_time);
+ /*
+ * On some systems the persistent_clock can not be detected at
+ * timekeeping_init by its return value, so if we see a valid
+ * value returned, update the persistent_clock_exists flag.
+ */
+ if (timekeeping_suspend_time.tv_sec || timekeeping_suspend_time.tv_nsec)
+ persistent_clock_exist = true;
+
write_seqlock_irqsave(&tk->lock, flags);
timekeeping_forward_now(tk);
timekeeping_suspended = 1;
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index d74500b..222b6de 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -772,6 +772,8 @@ static void set_pin_eapd(struct hda_codec *codec, hda_nid_t pin, bool enable)
return;
if (codec->inv_eapd)
enable = !enable;
+ if (spec->keep_eapd_on && !enable)
+ return;
snd_hda_codec_update_cache(codec, pin, 0,
AC_VERB_SET_EAPD_BTLENABLE,
enable ? 0x02 : 0x00);
@@ -3671,6 +3673,36 @@ static void update_automute_all(struct hda_codec *codec)
snd_hda_gen_mic_autoswitch(codec, NULL);
}
+/* call appropriate hooks */
+static void call_hp_automute(struct hda_codec *codec, struct hda_jack_tbl *jack)
+{
+ struct hda_gen_spec *spec = codec->spec;
+ if (spec->hp_automute_hook)
+ spec->hp_automute_hook(codec, jack);
+ else
+ snd_hda_gen_hp_automute(codec, jack);
+}
+
+static void call_line_automute(struct hda_codec *codec,
+ struct hda_jack_tbl *jack)
+{
+ struct hda_gen_spec *spec = codec->spec;
+ if (spec->line_automute_hook)
+ spec->line_automute_hook(codec, jack);
+ else
+ snd_hda_gen_line_automute(codec, jack);
+}
+
+static void call_mic_autoswitch(struct hda_codec *codec,
+ struct hda_jack_tbl *jack)
+{
+ struct hda_gen_spec *spec = codec->spec;
+ if (spec->mic_autoswitch_hook)
+ spec->mic_autoswitch_hook(codec, jack);
+ else
+ snd_hda_gen_mic_autoswitch(codec, jack);
+}
+
/*
* Auto-Mute mode mixer enum support
*/
@@ -3805,9 +3837,7 @@ static int check_auto_mute_availability(struct hda_codec *codec)
snd_printdd("hda-codec: Enable HP auto-muting on NID 0x%x\n",
nid);
snd_hda_jack_detect_enable_callback(codec, nid, HDA_GEN_HP_EVENT,
- spec->hp_automute_hook ?
- spec->hp_automute_hook :
- snd_hda_gen_hp_automute);
+ call_hp_automute);
spec->detect_hp = 1;
}
@@ -3820,9 +3850,7 @@ static int check_auto_mute_availability(struct hda_codec *codec)
snd_printdd("hda-codec: Enable Line-Out auto-muting on NID 0x%x\n", nid);
snd_hda_jack_detect_enable_callback(codec, nid,
HDA_GEN_FRONT_EVENT,
- spec->line_automute_hook ?
- spec->line_automute_hook :
- snd_hda_gen_line_automute);
+ call_line_automute);
spec->detect_lo = 1;
}
spec->automute_lo_possible = spec->detect_hp;
@@ -3864,9 +3892,7 @@ static bool auto_mic_check_imux(struct hda_codec *codec)
snd_hda_jack_detect_enable_callback(codec,
spec->am_entry[i].pin,
HDA_GEN_MIC_EVENT,
- spec->mic_autoswitch_hook ?
- spec->mic_autoswitch_hook :
- snd_hda_gen_mic_autoswitch);
+ call_mic_autoswitch);
return true;
}
diff --git a/sound/pci/hda/hda_generic.h b/sound/pci/hda/hda_generic.h
index 009b57b..aee3238 100644
--- a/sound/pci/hda/hda_generic.h
+++ b/sound/pci/hda/hda_generic.h
@@ -205,6 +205,7 @@ struct hda_gen_spec {
unsigned int multi_cap_vol:1; /* allow multiple capture xxx volumes */
unsigned int inv_dmic_split:1; /* inverted dmic w/a for conexant */
unsigned int own_eapd_ctl:1; /* set EAPD by own function */
+ unsigned int keep_eapd_on:1; /* don't turn off EAPD automatically */
unsigned int vmaster_mute_enum:1; /* add vmaster mute mode enum */
unsigned int indep_hp:1; /* independent HP supported */
unsigned int prefer_hp_amp:1; /* enable HP amp for speaker if any */
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index c35338a..9a9a032 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -136,6 +136,7 @@ static struct via_spec *via_new_spec(struct hda_codec *codec)
spec->codec_type = VT1708S;
spec->no_pin_power_ctl = 1;
spec->gen.indep_hp = 1;
+ spec->gen.keep_eapd_on = 1;
spec->gen.pcm_playback_hook = via_playback_pcm_hook;
return spec;
}
@@ -231,9 +232,14 @@ static void vt1708_update_hp_work(struct hda_codec *codec)
static void set_widgets_power_state(struct hda_codec *codec)
{
+#if 0 /* FIXME: the assumed connections don't match always with the
+ * actual routes by the generic parser, so better to disable
+ * the control for safety.
+ */
struct via_spec *spec = codec->spec;
if (spec->set_widgets_power_state)
spec->set_widgets_power_state(codec);
+#endif
}
static void update_power_state(struct hda_codec *codec, hda_nid_t nid,
@@ -478,7 +484,9 @@ static int via_suspend(struct hda_codec *codec)
/* Fix pop noise on headphones */
int i;
for (i = 0; i < spec->gen.autocfg.hp_outs; i++)
- snd_hda_set_pin_ctl(codec, spec->gen.autocfg.hp_pins[i], 0);
+ snd_hda_codec_write(codec, spec->gen.autocfg.hp_pins[i],
+ 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ 0x00);
}
return 0;
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index ca4739c..e5c7f9f 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -886,6 +886,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
case USB_ID(0x046d, 0x0808):
case USB_ID(0x046d, 0x0809):
case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+ case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */
case USB_ID(0x046d, 0x0991):
/* Most audio usb devices lie about volume resolution.
* Most Logitech webcams have res = 384.
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index c39f898..1c719d8 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -215,7 +215,13 @@
.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
},
{
- USB_DEVICE(0x046d, 0x0990),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .idVendor = 0x046d,
+ .idProduct = 0x0990,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.vendor_name = "Logitech, Inc.",
.product_name = "QuickCam Pro 9000",
@@ -1714,7 +1720,11 @@ YAMAHA_DEVICE(0x7010, "UB99"),
USB_DEVICE_VENDOR_SPEC(0x0582, 0x0108),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.ifnum = 0,
- .type = QUIRK_MIDI_STANDARD_INTERFACE
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0007,
+ .in_cables = 0x0007
+ }
}
},
{
next prev parent reply other threads:[~2013-06-13 17:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-13 17:55 Linux 3.9.6 Greg KH
2013-06-13 17:55 ` Greg KH [this message]
2013-06-13 19:10 ` Jiri Slaby
2013-06-13 19:19 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130613175516.GB9768@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.