From: Greg Kroah-Hartman <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Dan van der Ster <dan@vanderster.com>,
Alex Elder <elder@inktank.com>,
Josh Durgin <josh.durgin@inktank.com>
Subject: [ 07/48] rbd: dont destroy ceph_opts in rbd_add()
Date: Tue, 18 Jun 2013 09:17:33 -0700 [thread overview]
Message-ID: <20130618161726.946190518@linuxfoundation.org> (raw)
In-Reply-To: <20130618161725.912524266@linuxfoundation.org>
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Elder <elder@inktank.com>
commit 7262cfca430a1a0e0707149af29ae86bc0ded230 upstream.
Whether rbd_client_create() successfully creates a new client or
not, it takes responsibility for getting the ceph_opts structure
it's passed destroyed. If successful, the structure becomes
associated with the created client; if not, rbd_client_create()
will destroy it.
Previously, rbd_get_client() would call ceph_destroy_options()
if rbd_get_client() failed, and that meant it got called twice.
That led freeing various pointers more than once, which is never a
good idea.
This resolves:
http://tracker.ceph.com/issues/4559
Reported-by: Dan van der Ster <dan@vanderster.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/rbd.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -435,8 +435,8 @@ static const struct block_device_operati
};
/*
- * Initialize an rbd client instance.
- * We own *ceph_opts.
+ * Initialize an rbd client instance. Success or not, this function
+ * consumes ceph_opts.
*/
static struct rbd_client *rbd_client_create(struct ceph_options *ceph_opts)
{
@@ -583,7 +583,8 @@ static int parse_rbd_opts_token(char *c,
/*
* Get a ceph client with specific addr and configuration, if one does
- * not exist create it.
+ * not exist create it. Either way, ceph_opts is consumed by this
+ * function.
*/
static struct rbd_client *rbd_get_client(struct ceph_options *ceph_opts)
{
@@ -4104,7 +4105,6 @@ static ssize_t rbd_add(struct bus_type *
rc = PTR_ERR(rbdc);
goto err_out_args;
}
- ceph_opts = NULL; /* rbd_dev client now owns this */
/* pick the pool */
osdc = &rbdc->client->osdc;
@@ -4140,8 +4140,6 @@ err_out_rbd_dev:
err_out_client:
rbd_put_client(rbdc);
err_out_args:
- if (ceph_opts)
- ceph_destroy_options(ceph_opts);
kfree(rbd_opts);
rbd_spec_put(spec);
err_out_module:
next prev parent reply other threads:[~2013-06-18 16:33 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-18 16:17 [ 00/48] 3.9.7-stable review Greg Kroah-Hartman
2013-06-18 16:17 ` [ 01/48] audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE Greg Kroah-Hartman
2013-06-18 16:17 ` [ 02/48] b43: stop format string leaking into error msgs Greg Kroah-Hartman
2013-06-18 16:17 ` [ 03/48] ACPI / video: Do not bind to device objects with a scan handler Greg Kroah-Hartman
2013-06-18 16:17 ` [ 04/48] libceph: must hold mutex for reset_changed_osds() Greg Kroah-Hartman
2013-06-18 16:17 ` [ 05/48] ceph: add cpu_to_le32() calls when encoding a reconnect capability Greg Kroah-Hartman
2013-06-18 16:17 ` [ 06/48] ceph: ceph_pagelist_append might sleep while atomic Greg Kroah-Hartman
2013-06-18 16:17 ` Greg Kroah-Hartman [this message]
2013-06-18 16:17 ` [ 08/48] drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree Greg Kroah-Hartman
2013-06-18 16:17 ` [ 09/48] drm/gma500/psb: Unpin framebuffer on crtc disable Greg Kroah-Hartman
2013-06-18 16:17 ` [ 10/48] drm/gma500/cdv: " Greg Kroah-Hartman
2013-06-18 16:17 ` [ 11/48] Bluetooth: Fix missing length checks for L2CAP signalling PDUs Greg Kroah-Hartman
2013-06-18 16:17 ` [ 12/48] Bluetooth: Fix mgmt handling of power on failures Greg Kroah-Hartman
2013-06-18 16:17 ` [ 13/48] s390/pci: Implement IRQ functions if !PCI Greg Kroah-Hartman
2013-06-18 17:35 ` Ben Hutchings
2013-06-18 17:42 ` Greg Kroah-Hartman
2013-06-18 21:35 ` Ben Hutchings
2013-06-19 7:09 ` Martin Schwidefsky
2013-06-20 19:21 ` Greg Kroah-Hartman
2013-06-18 16:17 ` [ 14/48] ath9k: Disable PowerSave by default Greg Kroah-Hartman
2013-06-18 16:17 ` [ 15/48] Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity" Greg Kroah-Hartman
2013-06-18 16:17 ` [ 16/48] ath9k: Use minstrel rate control by default Greg Kroah-Hartman
2013-06-18 16:17 ` [ 17/48] CPU hotplug: provide a generic helper to disable/enable CPU hotplug Greg Kroah-Hartman
2013-06-18 16:17 ` [ 18/48] reboot: rigrate shutdown/reboot to boot cpu Greg Kroah-Hartman
2013-06-18 16:17 ` [ 19/48] kmsg: honor dmesg_restrict sysctl on /dev/kmsg Greg Kroah-Hartman
2013-06-18 16:17 ` [ 20/48] cciss: fix broken mutex usage in ioctl Greg Kroah-Hartman
2013-06-18 16:17 ` [ 21/48] memcg: dont initialize kmem-cache destroying work for root caches Greg Kroah-Hartman
2013-06-18 16:17 ` [ 22/48] wl12xx: fix minimum required firmware version for wl127x multirole Greg Kroah-Hartman
2013-06-18 16:17 ` [ 23/48] drm/i915: prefer VBT modes for SVDO-LVDS over EDID Greg Kroah-Hartman
2013-06-18 16:17 ` [ 24/48] swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion Greg Kroah-Hartman
2013-06-18 16:17 ` [ 25/48] md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it Greg Kroah-Hartman
2013-06-18 16:17 ` [ 26/48] md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place Greg Kroah-Hartman
2013-06-18 16:17 ` [ 27/48] md/raid1,raid10: use freeze_array in place of raise_barrier in various places Greg Kroah-Hartman
2013-06-18 16:17 ` [ 28/48] mm/page_alloc.c: fix watermark check in __zone_watermark_ok() Greg Kroah-Hartman
2013-06-18 16:17 ` [ 29/48] mm: migration: add migrate_entry_wait_huge() Greg Kroah-Hartman
2013-06-20 9:52 ` Satoru Takeuchi
2013-06-20 17:02 ` Greg Kroah-Hartman
2013-06-21 11:42 ` Satoru Takeuchi
2013-06-21 12:47 ` Michal Hocko
2013-06-21 22:56 ` Satoru Takeuchi
2013-06-22 12:28 ` Satoru Takeuchi
2013-06-27 18:48 ` Naoya Horiguchi
2013-06-18 16:17 ` [ 30/48] x86: Fix adjust_range_size_mask calling position Greg Kroah-Hartman
2013-06-18 16:17 ` [ 31/48] x86: Fix typo in kexec register clearing Greg Kroah-Hartman
2013-06-18 16:17 ` [ 32/48] drm/nv50/disp: force dac power state during load detect Greg Kroah-Hartman
2013-06-18 16:17 ` [ 33/48] drm/nv50/kms: use dac loadval from vbios, where its available Greg Kroah-Hartman
2013-06-18 16:18 ` [ 34/48] libceph: clear messenger auth_retry flag when we authenticate Greg Kroah-Hartman
2013-06-18 16:18 ` [ 35/48] libceph: fix authorizer invalidation Greg Kroah-Hartman
2013-06-18 16:18 ` [ 36/48] libceph: add update_authorizer auth method Greg Kroah-Hartman
2013-06-18 16:18 ` [ 37/48] libceph: wrap auth ops in wrapper functions Greg Kroah-Hartman
2013-06-18 16:18 ` [ 38/48] libceph: wrap auth methods in a mutex Greg Kroah-Hartman
2013-06-18 16:18 ` [ 39/48] Modify UEFI anti-bricking code Greg Kroah-Hartman
2013-06-18 16:18 ` [ 40/48] powerpc: Fix stack overflow crash in resume_kernel when ftracing Greg Kroah-Hartman
2013-06-18 16:18 ` [ 41/48] powerpc: Fix emulation of illegal instructions on PowerNV platform Greg Kroah-Hartman
2013-06-18 16:18 ` [ 42/48] powerpc: Fix missing/delayed calls to irq_work Greg Kroah-Hartman
2013-06-18 16:18 ` [ 43/48] usb: chipidea: fix id change handling Greg Kroah-Hartman
2013-06-18 16:18 ` [ 44/48] USB: pl2303: fix device initialisation at open Greg Kroah-Hartman
2013-06-18 16:18 ` [ 45/48] USB: f81232: " Greg Kroah-Hartman
2013-06-18 16:18 ` [ 46/48] USB: spcp8x5: " Greg Kroah-Hartman
2013-06-18 16:18 ` [ 47/48] tg3: Wait for boot code to finish after power on Greg Kroah-Hartman
2013-06-18 16:18 ` [ 48/48] ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant() Greg Kroah-Hartman
2013-06-18 21:55 ` [ 00/48] 3.9.7-stable review Shuah Khan
2013-06-18 22:11 ` Greg Kroah-Hartman
2013-06-18 22:58 ` Guenter Roeck
2013-06-18 23:26 ` Greg Kroah-Hartman
2013-06-20 10:02 ` Satoru Takeuchi
2013-06-20 17:01 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130618161726.946190518@linuxfoundation.org \
--to=greg@kroah.com \
--cc=dan@vanderster.com \
--cc=elder@inktank.com \
--cc=gregkh@linuxfoundation.org \
--cc=josh.durgin@inktank.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.