From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko =?utf-8?q?St=C3=BCbner?= Subject: [PATCH 3/4] pinctrl: remove slew-rate parameter from tz1090 Date: Tue, 25 Jun 2013 14:56:36 +0200 Message-ID: <201306251456.36499.heiko@sntech.de> References: <201306251455.01540.heiko@sntech.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <201306251455.01540.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" To: Linus Walleij Cc: James Hogan , devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring , Grant Likely List-Id: devicetree@vger.kernel.org As the binding for slew-rate is under discussion and seems to need more tought it will get removed for now, so it doesn't get an offical release. Therefore remove it again from the only current user, tz1090. Signed-off-by: Heiko Stuebner --- .../devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt | 5 +---- .../devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt | 7 +------ drivers/pinctrl/pinctrl-tz1090-pdc.c | 5 ----- drivers/pinctrl/pinctrl-tz1090.c | 5 ----- 4 files changed, 2 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc- pinctrl.txt index 9f7a85b..a186181 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt @@ -44,9 +44,6 @@ Optional subnode-properties: - bias-pull-down - input-schmitt-enable - input-schmitt-disable - - slew-rate: Integer, control slew rate of pins. - 0: slow (half frequency) - 1: fast - drive-strength: Integer, control drive strength of pins in mA. 2: 2mA 4: 4mA @@ -83,7 +80,7 @@ Valid values for pin and group names are: drive groups: - These support input-schmitt-enable, input-schmitt-disable, slew-rate, + These support input-schmitt-enable, input-schmitt-disable, drive-strength, low-power-enable, and low-power-disable. pdc diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt index 39bfd9c..4b27c99 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt @@ -44,9 +44,6 @@ Optional subnode-properties: - bias-pull-down - input-schmitt-enable - input-schmitt-disable - - slew-rate: Integer, control slew rate of pins. - 0: slow (half frequency) - 1: fast - drive-strength: Integer, control drive strength of pins in mA. 2: 2mA 4: 4mA @@ -124,7 +121,6 @@ Valid values for pin and group names are: function: afe, ts_out_0. input-schmitt-enable: supported. input-schmitt-disable: supported. - slew-rate: supported. drive-strength: supported. pdm_d pins: pdm_d. @@ -153,12 +149,11 @@ Valid values for pin and group names are: lcd_trace, phy_ringosc. input-schmitt-enable: supported. input-schmitt-disable: supported. - slew-rate: supported. drive-strength: supported. drive groups: - These all support input-schmitt-enable, input-schmitt-disable, slew-rate, + These all support input-schmitt-enable, input-schmitt-disable, and drive-strength. jtag diff --git a/drivers/pinctrl/pinctrl-tz1090-pdc.c b/drivers/pinctrl/pinctrl-tz1090-pdc.c index 12e4808..d4f12cc 100644 --- a/drivers/pinctrl/pinctrl-tz1090-pdc.c +++ b/drivers/pinctrl/pinctrl-tz1090-pdc.c @@ -809,11 +809,6 @@ static int tz1090_pdc_pinconf_group_reg(struct pinctrl_dev *pctldev, *width = 1; *map = tz1090_pdc_boolean_map; break; - case PIN_CONFIG_SLEW_RATE: - *shift = REG_GPIO_CONTROL2_PDC_SR_S; - *width = 1; - *map = tz1090_pdc_boolean_map; - break; case PIN_CONFIG_DRIVE_STRENGTH: *shift = REG_GPIO_CONTROL2_PDC_DR_S; *width = 2; diff --git a/drivers/pinctrl/pinctrl-tz1090.c b/drivers/pinctrl/pinctrl-tz1090.c index 02ff3a2..4edae08 100644 --- a/drivers/pinctrl/pinctrl-tz1090.c +++ b/drivers/pinctrl/pinctrl-tz1090.c @@ -1834,11 +1834,6 @@ static int tz1090_pinconf_group_reg(struct pinctrl_dev *pctldev, *width = 1; *map = tz1090_boolean_map; break; - case PIN_CONFIG_SLEW_RATE: - *reg = REG_PINCTRL_SR; - *width = 1; - *map = tz1090_boolean_map; - break; case PIN_CONFIG_DRIVE_STRENGTH: *reg = REG_PINCTRL_DR; *width = 2; -- 1.7.10.4 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751646Ab3FYM4k (ORCPT ); Tue, 25 Jun 2013 08:56:40 -0400 Received: from gloria.sntech.de ([95.129.55.99]:60352 "EHLO gloria.sntech.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751044Ab3FYM4j (ORCPT ); Tue, 25 Jun 2013 08:56:39 -0400 From: Heiko =?utf-8?q?St=C3=BCbner?= To: Linus Walleij Subject: [PATCH 3/4] pinctrl: remove slew-rate parameter from tz1090 Date: Tue, 25 Jun 2013 14:56:36 +0200 User-Agent: KMail/1.13.7 (Linux/3.2.0-3-686-pae; KDE/4.8.4; i686; ; ) Cc: Stephen Warren , James Hogan , linux-kernel@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, Grant Likely , Rob Herring References: <201306251455.01540.heiko@sntech.de> In-Reply-To: <201306251455.01540.heiko@sntech.de> MIME-Version: 1.0 Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <201306251456.36499.heiko@sntech.de> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org As the binding for slew-rate is under discussion and seems to need more tought it will get removed for now, so it doesn't get an offical release. Therefore remove it again from the only current user, tz1090. Signed-off-by: Heiko Stuebner --- .../devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt | 5 +---- .../devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt | 7 +------ drivers/pinctrl/pinctrl-tz1090-pdc.c | 5 ----- drivers/pinctrl/pinctrl-tz1090.c | 5 ----- 4 files changed, 2 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc- pinctrl.txt index 9f7a85b..a186181 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt @@ -44,9 +44,6 @@ Optional subnode-properties: - bias-pull-down - input-schmitt-enable - input-schmitt-disable - - slew-rate: Integer, control slew rate of pins. - 0: slow (half frequency) - 1: fast - drive-strength: Integer, control drive strength of pins in mA. 2: 2mA 4: 4mA @@ -83,7 +80,7 @@ Valid values for pin and group names are: drive groups: - These support input-schmitt-enable, input-schmitt-disable, slew-rate, + These support input-schmitt-enable, input-schmitt-disable, drive-strength, low-power-enable, and low-power-disable. pdc diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt index 39bfd9c..4b27c99 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt @@ -44,9 +44,6 @@ Optional subnode-properties: - bias-pull-down - input-schmitt-enable - input-schmitt-disable - - slew-rate: Integer, control slew rate of pins. - 0: slow (half frequency) - 1: fast - drive-strength: Integer, control drive strength of pins in mA. 2: 2mA 4: 4mA @@ -124,7 +121,6 @@ Valid values for pin and group names are: function: afe, ts_out_0. input-schmitt-enable: supported. input-schmitt-disable: supported. - slew-rate: supported. drive-strength: supported. pdm_d pins: pdm_d. @@ -153,12 +149,11 @@ Valid values for pin and group names are: lcd_trace, phy_ringosc. input-schmitt-enable: supported. input-schmitt-disable: supported. - slew-rate: supported. drive-strength: supported. drive groups: - These all support input-schmitt-enable, input-schmitt-disable, slew-rate, + These all support input-schmitt-enable, input-schmitt-disable, and drive-strength. jtag diff --git a/drivers/pinctrl/pinctrl-tz1090-pdc.c b/drivers/pinctrl/pinctrl-tz1090-pdc.c index 12e4808..d4f12cc 100644 --- a/drivers/pinctrl/pinctrl-tz1090-pdc.c +++ b/drivers/pinctrl/pinctrl-tz1090-pdc.c @@ -809,11 +809,6 @@ static int tz1090_pdc_pinconf_group_reg(struct pinctrl_dev *pctldev, *width = 1; *map = tz1090_pdc_boolean_map; break; - case PIN_CONFIG_SLEW_RATE: - *shift = REG_GPIO_CONTROL2_PDC_SR_S; - *width = 1; - *map = tz1090_pdc_boolean_map; - break; case PIN_CONFIG_DRIVE_STRENGTH: *shift = REG_GPIO_CONTROL2_PDC_DR_S; *width = 2; diff --git a/drivers/pinctrl/pinctrl-tz1090.c b/drivers/pinctrl/pinctrl-tz1090.c index 02ff3a2..4edae08 100644 --- a/drivers/pinctrl/pinctrl-tz1090.c +++ b/drivers/pinctrl/pinctrl-tz1090.c @@ -1834,11 +1834,6 @@ static int tz1090_pinconf_group_reg(struct pinctrl_dev *pctldev, *width = 1; *map = tz1090_boolean_map; break; - case PIN_CONFIG_SLEW_RATE: - *reg = REG_PINCTRL_SR; - *width = 1; - *map = tz1090_boolean_map; - break; case PIN_CONFIG_DRIVE_STRENGTH: *reg = REG_PINCTRL_DR; *width = 2; -- 1.7.10.4