From: Thierry Reding <thierry.reding@gmail.com>
To: Marek Belisko <marek.belisko@gmail.com>
Cc: linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org,
Marek Belisko <marek.belisko@streamunlimited.com>
Subject: Re: [PATCH v2] pwm: pwm-tiehrpwm: Use clk_enable/disable instead clk_prepare/unprepare.
Date: Wed, 26 Jun 2013 23:34:44 +0200 [thread overview]
Message-ID: <20130626213443.GB29479@manwe> (raw)
In-Reply-To: <1372250285-11709-1-git-send-email-marek.belisko@streamunlimited.com>
[-- Attachment #1: Type: text/plain, Size: 4975 bytes --]
On Wed, Jun 26, 2013 at 02:38:04PM +0200, Marek Belisko wrote:
> This was found when using pwm-led on am33xx and enable
> heartbeat trigger.
>
> [ 808.624876] =================================
> [ 808.629443] [ INFO: inconsistent lock state ]
> [ 808.634021] 3.9.0 #2 Not tainted
> [ 808.637415] ---------------------------------
> [ 808.641981] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
> [ 808.648288] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
> [ 808.653494] (prepare_lock){+.?.+.}, at: [<c027c211>] clk_unprepare+0x15/0x24
> [ 808.661040] {SOFTIRQ-ON-W} state was registered at:
> [ 808.666155] [<c004ec4d>] __lock_acquire+0x411/0x824
> [ 808.671465] [<c004f359>] lock_acquire+0x41/0x50
> [ 808.676412] [<c039ee9d>] mutex_lock_nested+0x31/0x1d8
> [ 808.681912] [<c027c275>] clk_prepare+0x15/0x28
> [ 808.686764] [<c0590c6b>] _init+0x117/0x1e0
> [ 808.691256] [<c0019ef9>] omap_hwmod_for_each+0x29/0x3c
> [ 808.696842] [<c0591107>] __omap_hwmod_setup_all+0x17/0x2c
> [ 808.702696] [<c0008653>] do_one_initcall+0xc3/0x10c
> [ 808.708017] [<c058a627>] kernel_init_freeable+0xa7/0x134
> [ 808.713778] [<c039a543>] kernel_init+0x7/0x98
> [ 808.718544] [<c000cd95>] ret_from_fork+0x11/0x3c
> [ 808.723583] irq event stamp: 1379172
> [ 808.727328] hardirqs last enabled at (1379172): [<c03a0759>] _raw_spin_unlock_irqrestore+0x21/0x30
> [ 808.736828] hardirqs last disabled at (1379171): [<c03a03c3>] _raw_spin_lock_irqsave+0x13/0x38
> [ 808.745876] softirqs last enabled at (1379164): [<c002ae5d>] irq_enter+0x49/0x4c
> [ 808.753747] softirqs last disabled at (1379165): [<c002aec3>] irq_exit+0x63/0x88
> [ 808.761518]
> [ 808.761518] other info that might help us debug this:
> [ 808.768373] Possible unsafe locking scenario:
> [ 808.768373]
> [ 808.774578] CPU0
> [ 808.777141] ----
> [ 808.779705] lock(prepare_lock);
> [ 808.783186] <Interrupt>
> [ 808.785929] lock(prepare_lock);
> [ 808.789595]
> [ 808.789595] *** DEADLOCK ***
> [ 808.789595]
> [ 808.795805] 1 lock held by swapper/0:
> [ 808.799643] #0: (((&heartbeat_data->timer))){+.-...}, at: [<c002e204>] call_timer_fn+0x0/0x90
> [ 808.808814]
> [ 808.808814] stack backtrace:
> [ 808.813402] [<c000ff19>] (unwind_backtrace+0x1/0x98) from [<c039bd75>] (print_usage_bug.part.25+0x16d/0x1cc)
> [ 808.823721] [<c039bd75>] (print_usage_bug.part.25+0x16d/0x1cc) from [<c004e595>] (mark_lock+0x18d/0x434)
> [ 808.833669] [<c004e595>] (mark_lock+0x18d/0x434) from [<c004ec1d>] (__lock_acquire+0x3e1/0x824)
> [ 808.842803] [<c004ec1d>] (__lock_acquire+0x3e1/0x824) from [<c004f359>] (lock_acquire+0x41/0x50)
> [ 808.852031] [<c004f359>] (lock_acquire+0x41/0x50) from [<c039ee9d>] (mutex_lock_nested+0x31/0x1d8)
> [ 808.861433] [<c039ee9d>] (mutex_lock_nested+0x31/0x1d8) from [<c027c211>] (clk_unprepare+0x15/0x24)
> [ 808.870930] [<c027c211>] (clk_unprepare+0x15/0x24) from [<c019f7bf>] (ehrpwm_pwm_disable+0x5f/0x80)
> [ 808.880431] [<c019f7bf>] (ehrpwm_pwm_disable+0x5f/0x80) from [<c019f29f>] (pwm_disable+0x27/0x28)
> [ 808.889751] [<c019f29f>] (pwm_disable+0x27/0x28) from [<c026f8f3>] (led_heartbeat_function+0x3f/0xb0)
> [ 808.899431] [<c026f8f3>] (led_heartbeat_function+0x3f/0xb0) from [<c002e249>] (call_timer_fn+0x45/0x90)
> [ 808.909288] [<c002e249>] (call_timer_fn+0x45/0x90) from [<c002e399>] (run_timer_softirq+0x105/0x17c)
> [ 808.918884] [<c002e399>] (run_timer_softirq+0x105/0x17c) from [<c002abc5>] (__do_softirq+0xa5/0x150)
> [ 808.928486] [<c002abc5>] (__do_softirq+0xa5/0x150) from [<c002aec3>] (irq_exit+0x63/0x88)
> [ 808.937098] [<c002aec3>] (irq_exit+0x63/0x88) from [<c000d599>] (handle_IRQ+0x21/0x54)
> [ 808.945415] [<c000d599>] (handle_IRQ+0x21/0x54) from [<c0008495>] (omap3_intc_handle_irq+0x5d/0x68)
> [ 808.954900] [<c0008495>] (omap3_intc_handle_irq+0x5d/0x68) from [<c000c7ff>] (__irq_svc+0x3f/0x64)
> [ 808.964287] Exception stack(0xc05b1f68 to 0xc05b1fb0)
> [ 808.969587] 1f60: 00000001 00000001 00000000 00000000 c05b0000 c0619748
> [ 808.978158] 1f80: c05b0000 c05b0000 c0619748 413fc082 00000000 00000000 01000000 c05b1fb0
> [ 808.986719] 1fa0: c004f989 c000d6f0 400f0033 ffffffff
> [ 808.992024] [<c000c7ff>] (__irq_svc+0x3f/0x64) from [<c000d6f0>] (cpu_idle+0x60/0x98)
> [ 809.000250] [<c000d6f0>] (cpu_idle+0x60/0x98) from [<c058a535>] (start_kernel+0x1e9/0x234)
>
> Remove non atomic clk api calls and use only atomic for enable/disable because
> can be called from atomic context (led_heartbeat_function is timer callback).
>
> Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com>
> ---
>
> changes from v1:
> - add clk_unprepare() to .remove callback +
> add it also to error handling when probe fails
>
> drivers/pwm/pwm-tiehrpwm.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
Applied, thanks.
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2013-06-26 21:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-26 12:38 [PATCH v2] pwm: pwm-tiehrpwm: Use clk_enable/disable instead clk_prepare/unprepare Marek Belisko
2013-06-26 21:34 ` Thierry Reding [this message]
2013-06-26 21:41 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130626213443.GB29479@manwe \
--to=thierry.reding@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=marek.belisko@gmail.com \
--cc=marek.belisko@streamunlimited.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.