[PATCH] MIPS: Expose missing pci_io{map,unmap} declarations

[PATCH] MIPS: Expose missing pci_io{map,unmap} declarations

[Markos Chandras]

commit 78857614104a26cdada4c53eea104752042bf5a1 upstream.

The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move
it to the CONFIG_MIPS symbol so it's always selected for MIPS.
This fixes the missing pci_iomap declaration for MIPS.
Moreover, the pci_iounmap function was not defined in the
io.h header file if the CONFIG_PCI symbol is not set,
but it should since MIPS is not using CONFIG_GENERIC_IOMAP.

This fixes the following problem on a allyesconfig:

drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of
function 'pci_iomap' [-Werror=implicit-function-declaration]
drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of
function 'pci_iounmap' [-Werror=implicit-function-declaration]

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5478/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 arch/mips/Kconfig          | 2 +-
 arch/mips/include/asm/io.h | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b3e10fd..3811c84 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -25,6 +25,7 @@ config MIPS
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select IRQ_FORCED_THREADING
 	select HAVE_MEMBLOCK
@@ -2353,7 +2354,6 @@ config PCI
 	bool "Support for PCI controller"
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
-	select GENERIC_PCI_IOMAP
 	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 29d9c23..98ca652 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -169,6 +169,11 @@ static inline void * isa_bus_to_virt(unsigned long address)
 extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
 extern void __iounmap(const volatile void __iomem *addr);

+#ifndef CONFIG_PCI
+struct pci_dev;
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
+#endif
+
 static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
 	unsigned long flags)
 {
--
1.8.3.2

[PATCH] MIPS: Expose missing pci_io{map,unmap} declarations

[Markos Chandras]

The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move
it to the CONFIG_MIPS symbol so it's always selected for MIPS.
This fixes the missing pci_iomap declaration for MIPS.
Moreover, the pci_iounmap function was not defined in the
io.h header file if the CONFIG_PCI symbol is not set,
but it should since MIPS is not using CONFIG_GENERIC_IOMAP.

This fixes the following problem on a allyesconfig:

drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of
function 'pci_iomap' [-Werror=implicit-function-declaration]
drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of
function 'pci_iounmap' [-Werror=implicit-function-declaration]

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> 
---
This patch is for the upstream-sfr/mips-for-linux-next tree
---
 arch/mips/Kconfig          | 2 +-
 arch/mips/include/asm/io.h | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7a58ab9..e53e2b4 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -27,6 +27,7 @@ config MIPS
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select IRQ_FORCED_THREADING
@@ -2412,7 +2413,6 @@ config PCI
 	bool "Support for PCI controller"
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
-	select GENERIC_PCI_IOMAP
 	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index b7e5985..b84e1fb 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -170,6 +170,11 @@ static inline void * isa_bus_to_virt(unsigned long address)
 extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
 extern void __iounmap(const volatile void __iomem *addr);
 
+#ifndef CONFIG_PCI
+struct pci_dev;
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
+#endif
+
 static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
 	unsigned long flags)
 {
-- 
1.8.2.1

[PATCH] MIPS: Expose missing pci_io{map,unmap} declarations

[Markos Chandras]

The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move
it to the CONFIG_MIPS symbol so it's always selected for MIPS.
This fixes the missing pci_iomap declaration for MIPS.
Moreover, the pci_iounmap function was not defined in the
io.h header file if the CONFIG_PCI symbol is not set,
but it should since MIPS is not using CONFIG_GENERIC_IOMAP.

This fixes the following problem on a allyesconfig:

drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of
function 'pci_iomap' [-Werror=implicit-function-declaration]
drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of
function 'pci_iounmap' [-Werror=implicit-function-declaration]

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> 
---
This patch is for the upstream-sfr/mips-for-linux-next tree
---
 arch/mips/Kconfig          | 2 +-
 arch/mips/include/asm/io.h | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7a58ab9..e53e2b4 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -27,6 +27,7 @@ config MIPS
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select IRQ_FORCED_THREADING
@@ -2412,7 +2413,6 @@ config PCI
 	bool "Support for PCI controller"
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
-	select GENERIC_PCI_IOMAP
 	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index b7e5985..b84e1fb 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -170,6 +170,11 @@ static inline void * isa_bus_to_virt(unsigned long address)
 extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
 extern void __iounmap(const volatile void __iomem *addr);
 
+#ifndef CONFIG_PCI
+struct pci_dev;
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
+#endif
+
 static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
 	unsigned long flags)
 {
-- 
1.8.2.1

Re: [PATCH] MIPS: Expose missing pci_io{map,unmap} declarations

[Ralf Baechle]

On Mon, Jun 17, 2013 at 10:09:00AM +0100, Markos Chandras wrote:

> The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move
> it to the CONFIG_MIPS symbol so it's always selected for MIPS.
> This fixes the missing pci_iomap declaration for MIPS.
> Moreover, the pci_iounmap function was not defined in the
> io.h header file if the CONFIG_PCI symbol is not set,
> but it should since MIPS is not using CONFIG_GENERIC_IOMAP.
> 
> This fixes the following problem on a allyesconfig:
> 
> drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of
> function 'pci_iomap' [-Werror=implicit-function-declaration]
> drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of
> function 'pci_iounmap' [-Werror=implicit-function-declaration]
> 
> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> 

Hmm...  Looking at the code I find that it appears that GENERIC_PCI_IOMAP
was never really meant to be enabled with PCI (though some architectures
are using that) so I was wondering if maybe something like below would
have been better.  Either way, you sent the first patch, so I'm applying
that one.

Thanks!

  Ralf

 arch/mips/include/asm/io.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index b7e5985..dc81131 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -620,4 +620,17 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
  */
 #define xlate_dev_kmem_ptr(p)	p
 
+#ifndef CONFIG_PCI
+struct pci_dev;
+
+static inline void __iomem *pci_iomap(struct pci_dev *dev, int bar,
+	unsigned long max)
+{
+	return NULL;
+}
+
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
+
+#endif /* CONFIG_PCI */
+
 #endif /* _ASM_IO_H */