From: "Eric Bénard" <eric@eukrea.com>
To: barebox@lists.infradead.org
Subject: iMX nand BBT problem
Date: Mon, 1 Jul 2013 18:12:34 +0200 [thread overview]
Message-ID: <20130701181234.15305e43@e6520eb> (raw)
Hi,
when upgrading from 2013.05.1 to 2013.06 on an i.MX35 I get the
following log :
- initial log :
barebox 2013.05.1-00001-ga8e8785 #25 Mon Jul 1 17:12:14 CEST 2013
Board: Eukrea CPUIMX35
detected i.MX35 revision 2.1
netconsole: registered as cs1
nand: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V
8-bit), page size: 2048, OOB size: 64
mdio_bus: miibus0: probed
imx-ipu-fb imx-ipu-fb: i.MX Framebuffer driver
imx-esdhc imx-esdhc0: registered as imx-esdhc0
ehci ehci0: USB EHCI 1.00
malloc space: 0x87700000 -> 0x87efffff (size 8 MiB)
running /env/bin/init...
--> upgrade barebox :
barebox 2013.06.0-00001-gf355cf4 #26 Mon Jul 1 17:57:52 CEST 2013
Board: Eukrea CPUIMX35
detected i.MX35 revision 2.1
netconsole: registered as cs1
nand: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V
8-bit), page size: 2048, OOB size: 64
nand: Bad block table not found for chip 0
nand: Bad block table not found for chip 0
imx_nand imx_nand: no BBT found. create one using the imx_nand_bbm
command
mdio_bus: miibus0: probed
imx-ipu-fb imx-ipu-fb: i.MX Framebuffer driver
imx-esdhc imx-esdhc0: registered as imx-esdhc0
ehci ehci0: USB EHCI 1.00
malloc space: 0x87700000 -> 0x87efffff (size 8 MiB)
envfs: wrong magic on /dev/env0
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
no MAC address set for eth0. please enter the one found on your board:
00:12:34:56:78:90 saving environment
Once I reset the board I can see that the env was not saved and I get
prompted again for the MAC address.
Any idea of what can be wrong there ?
This board is configured in external boot from a 2k NAND (and was
already using flash BBT), and the kernel and rootfs still run without
any visible problem.
Eric
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2013-07-01 16:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-01 16:12 Eric Bénard [this message]
2013-07-02 8:14 ` iMX nand BBT problem Sascha Hauer
2013-07-02 8:24 ` Re[2]: " Alexander Shiyan
2013-07-02 8:26 ` Eric Bénard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130701181234.15305e43@e6520eb \
--to=eric@eukrea.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.