[PATCH] gpio-mcp23s08: i2c: auto-select base if no DT match or platform data

["Daniel M. Weeks" <dan@danweeks.net>]

The call to gpiochip_add made by this driver is capable of auto-selecting a
base if one is not provided. However, it was not called unless there was
already a DT entry or platform data. This patch calls it even if the base is
not already known so that gpiochip_add can attempt to find a usable base.

Signed-off-by: Daniel M. Weeks <dan@danweeks.net>
---
 drivers/gpio/gpio-mcp23s08.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index 6a4470b..87ed6bf 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -520,14 +520,13 @@ static int mcp230xx_probe(struct i2c_client *client,
 
 	match = of_match_device(of_match_ptr(mcp23s08_i2c_of_match),
 					&client->dev);
-	if (match) {
+	pdata = client->dev.platform_data;
+	if (match || !pdata) {
 		base = -1;
 		pullups = 0;
 	} else {
-		pdata = client->dev.platform_data;
-		if (!pdata || !gpio_is_valid(pdata->base)) {
-			dev_dbg(&client->dev,
-					"invalid or missing platform data\n");
+		if (!gpio_is_valid(pdata->base)) {
+			dev_dbg(&client->dev, "invalid platform data\n");
 			return -EINVAL;
 		}
 		base = pdata->base;
-- 
Daniel M. Weeks