All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, "Theodore Tso" <tytso@mit.edu>,
	Li Zhong <lizhongfs@gmail.com>,
	Lukas Czerner <lczerner@redhat.com>
Subject: [ 56/72] ext4: fix ext4_get_group_number()
Date: Thu, 18 Jul 2013 22:26:13 -0700	[thread overview]
Message-ID: <20130719052603.685456377@linuxfoundation.org> (raw)
In-Reply-To: <20130719052559.852627424@linuxfoundation.org>

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 960fd856fdc3b08b3638f3f9b6b4bfceb77660c7 upstream.

The function ext4_get_group_number() was introduced as an optimization
in commit bd86298e60b8.  Unfortunately, this commit incorrectly
calculate the group number for file systems with a 1k block size (when
s_first_data_block is 1 instead of zero).  This could cause the
following kernel BUG:

[  568.877799] ------------[ cut here ]------------
[  568.877833] kernel BUG at fs/ext4/mballoc.c:3728!
[  568.877840] Oops: Exception in kernel mode, sig: 5 [#1]
[  568.877845] SMP NR_CPUS=32 NUMA pSeries
[  568.877852] Modules linked in: binfmt_misc
[  568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809f-dirty #1
[  568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000
[  568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8
[  568.877879] REGS: c0000001fa956ed0 TRAP: 0700   Not tainted  (3.10.0-03216-g7c6809f-dirty)
[  568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 24000428  XER: 00000000
[  568.877902] SOFTE: 1
[  568.877905] CFAR: c0000000002b5464
[  568.877908]
GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000
GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f
GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000
GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0
GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672
GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000
GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288
GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10
[  568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0
[  568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0
[  568.878004] Call Trace:
[  568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable)
[  568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444
[  568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734
[  568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4
[  568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178
[  568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490
[  568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60
[  568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80
[  568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0
[  568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc
[  568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4
[  568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80
[  568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c
[  568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90
[  568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c
[  568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c
[  568.878125] Instruction dump:
[  568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70
[  568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78
[  568.878160] ---[ end trace 594d911d9654770b ]---

In addition fix the STD_GROUP optimization so that it works for
bigalloc file systems as well.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Li Zhong <lizhongfs@gmail.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/balloc.c |    4 ++--
 fs/ext4/super.c  |    8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -38,8 +38,8 @@ ext4_group_t ext4_get_group_number(struc
 	ext4_group_t group;
 
 	if (test_opt2(sb, STD_GROUP_SIZE))
-		group = (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) +
-			 block) >>
+		group = (block -
+			 le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) >>
 			(EXT4_BLOCK_SIZE_BITS(sb) + EXT4_CLUSTER_BITS(sb) + 3);
 	else
 		ext4_get_group_no_and_offset(sb, block, &group, NULL);
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3586,10 +3586,6 @@ static int ext4_fill_super(struct super_
 	sbi->s_addr_per_block_bits = ilog2(EXT4_ADDR_PER_BLOCK(sb));
 	sbi->s_desc_per_block_bits = ilog2(EXT4_DESC_PER_BLOCK(sb));
 
-	/* Do we have standard group size of blocksize * 8 blocks ? */
-	if (sbi->s_blocks_per_group == blocksize << 3)
-		set_opt2(sb, STD_GROUP_SIZE);
-
 	for (i = 0; i < 4; i++)
 		sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
 	sbi->s_def_hash_version = es->s_def_hash_version;
@@ -3659,6 +3655,10 @@ static int ext4_fill_super(struct super_
 		goto failed_mount;
 	}
 
+	/* Do we have standard group size of clustersize * 8 blocks ? */
+	if (sbi->s_blocks_per_group == clustersize << 3)
+		set_opt2(sb, STD_GROUP_SIZE);
+
 	/*
 	 * Test whether we have more sectors than will fit in sector_t,
 	 * and whether the max offset is addressable by the page cache.



  parent reply	other threads:[~2013-07-19  5:31 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-19  5:25 [ 00/72] 3.10.2-stable review Greg Kroah-Hartman
2013-07-19  5:25 ` [ 01/72] CIFS use sensible file nlink values if unprovided Greg Kroah-Hartman
2013-07-19  5:25 ` [ 02/72] CIFS: Fix a deadlock when a file is reopened Greg Kroah-Hartman
2013-07-19  5:25 ` [ 03/72] rtlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200ND Greg Kroah-Hartman
2013-07-19  5:25 ` [ 04/72] rtlwifi: rtl8723ae: Fix typo in firmware names Greg Kroah-Hartman
2013-07-19  5:25 ` [ 05/72] rtlwifi: rtl8192cu: Fix duplicate if test Greg Kroah-Hartman
2013-07-19  5:25 ` [ 06/72] jbd2: move superblock checksum calculation to jbd2_write_superblock() Greg Kroah-Hartman
2013-07-19  5:25 ` [ 07/72] jbd2: fix theoretical race in jbd2__journal_restart Greg Kroah-Hartman
2013-07-19  5:25 ` [ 08/72] ext4: fix corruption when online resizing a fs with 1K block size Greg Kroah-Hartman
2013-07-19  5:25 ` [ 09/72] ext3,ext4: dont mess with dir_file->f_pos in htree_dirblock_to_tree() Greg Kroah-Hartman
2013-07-19  5:25 ` [ 10/72] ext4: check error return from ext4_write_inline_data_end() Greg Kroah-Hartman
2013-07-19  5:25 ` [ 11/72] pch_uart: Add uart_clk selection for the MinnowBoard Greg Kroah-Hartman
2013-07-19  5:25 ` [ 12/72] USB: option,qcserial: move Novatel Gobi1K IDs to qcserial Greg Kroah-Hartman
2013-07-19  5:25 ` [ 13/72] usb: gadget: f_mass_storage: add missing memory barrier for thread_wakeup_needed Greg Kroah-Hartman
2013-07-19  5:25 ` [ 14/72] USB: ehci-omap: Tweak PHY initialization sequence Greg Kroah-Hartman
2013-07-19  5:25 ` [ 15/72] xhci: check for failed dma pool allocation Greg Kroah-Hartman
2013-07-19  5:25 ` [ 16/72] usb: host: xhci-plat: release mem region while removing module Greg Kroah-Hartman
2013-07-19  5:25 ` [ 17/72] drivers: hv: switch to use mb() instead of smp_mb() Greg Kroah-Hartman
2013-07-19  5:25 ` [ 18/72] pcmcia: at91_cf: fix gpio_get_value in at91_cf_get_status Greg Kroah-Hartman
2013-07-19  5:25 ` [ 19/72] cgroup: fix umount vs cgroup_event_remove() race Greg Kroah-Hartman
2013-07-19  5:25 ` [ 20/72] cgroup: fix RCU accesses to task->cgroups Greg Kroah-Hartman
2013-07-19  5:25 ` [ 21/72] parisc: document the shadow registers Greg Kroah-Hartman
2013-07-19  5:25 ` [ 22/72] parisc: Fix gcc miscompilation in pa_memcpy() Greg Kroah-Hartman
2013-07-19  5:25 ` [ 23/72] slab: fix init_lock_keys Greg Kroah-Hartman
2013-07-19  5:25 ` [ 24/72] parisc: Ensure volatile space register %sr1 is not clobbered Greg Kroah-Hartman
2013-07-19  5:25 ` [ 25/72] parisc: fix LMMIO mismatch between PAT length and MASK register Greg Kroah-Hartman
2013-07-19  5:25 ` [ 26/72] parisc: optimize mtsp(0,sr) inline assembly Greg Kroah-Hartman
2013-07-19  5:25 ` [ 27/72] x86, efi: retry ExitBootServices() on failure Greg Kroah-Hartman
2013-07-19  5:25 ` [ 28/72] xen/time: remove blocked time accounting from xen "clockchip" Greg Kroah-Hartman
2013-07-19  5:25 ` [ 29/72] xen/pcifront: Deal with toolstack missing XenbusStateClosing state Greg Kroah-Hartman
2013-07-19  5:25 ` [ 30/72] genirq: Fix can_request_irq() for IRQs without an action Greg Kroah-Hartman
2013-07-19  5:25 ` [ 31/72] drivers/rtc/rtc-rv3029c2.c: fix disabling AIE irq Greg Kroah-Hartman
2013-07-19  5:25 ` [ 32/72] ACPI: Add CMOS RTC Operation Region handler support Greg Kroah-Hartman
2013-07-19  5:25 ` [ 33/72] ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan Greg Kroah-Hartman
2013-07-19  5:25 ` [ 34/72] ACPICA: Do not use extended sleep registers unless HW-reduced bit is set Greg Kroah-Hartman
2013-07-19  5:25 ` [ 35/72] ACPI / PM: Fix corner case in acpi_bus_update_power() Greg Kroah-Hartman
2013-07-19  5:25 ` [ 36/72] HID: apple: Add support for the 2013 Macbook Air Greg Kroah-Hartman
2013-07-19  5:25 ` [ 37/72] Input: bcm5974 - add support for the 2013 MacBook Air Greg Kroah-Hartman
2013-07-19  5:40   ` Dmitry Torokhov
2013-07-19  5:44     ` Greg Kroah-Hartman
2013-07-22  1:42       ` Greg Kroah-Hartman
2013-07-22  2:21         ` Dmitry Torokhov
2013-07-22 10:07           ` rydberg
2013-07-19  5:25 ` [ 38/72] arch: c6x: mm: include "asm/uaccess.h" to pass compiling Greg Kroah-Hartman
2013-07-19  5:25 ` [ 39/72] ocfs2: xattr: fix inlined xattr reflink Greg Kroah-Hartman
2013-07-19  5:25 ` [ 40/72] nbd: correct disconnect behavior Greg Kroah-Hartman
2013-07-19  5:25 ` [ 41/72] PCI: Finish SR-IOV VF setup before adding the device Greg Kroah-Hartman
2013-07-19  5:25 ` [ 42/72] PCI: Fix refcount issue in pci_create_root_bus() error recovery path Greg Kroah-Hartman
2013-07-19  5:26 ` [ 43/72] iwlwifi: pcie: fix race in queue unmapping Greg Kroah-Hartman
2013-07-19  5:26 ` [ 44/72] iwlwifi: pcie: wake the queue if stopped when being unmapped Greg Kroah-Hartman
2013-07-19  5:26 ` [ 45/72] ahci: Add AMD CZ SATA device ID Greg Kroah-Hartman
2013-07-19  5:26 ` [ 46/72] ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs Greg Kroah-Hartman
2013-07-19  5:26 ` [ 47/72] ahci: remove pmp link online check in FBS EH Greg Kroah-Hartman
2013-07-19  5:26 ` [ 48/72] timer: Fix jiffies wrap behavior of round_jiffies_common() Greg Kroah-Hartman
2013-07-19  5:26 ` [ 49/72] Btrfs: fix estale with btrfs send Greg Kroah-Hartman
2013-07-19  5:26 ` [ 50/72] Btrfs: hold the tree mod lock in __tree_mod_log_rewind Greg Kroah-Hartman
2013-07-19  5:26 ` [ 51/72] Btrfs: only do the tree_mod_log_free_eb if this is our last ref Greg Kroah-Hartman
2013-07-19  5:26 ` [ 52/72] ext4: fix data offset overflow on 32-bit archs in ext4_inline_data_fiemap() Greg Kroah-Hartman
2013-07-19  5:26 ` [ 53/72] ext4: fix overflows in SEEK_HOLE, SEEK_DATA implementations Greg Kroah-Hartman
2013-07-19  5:26 ` [ 54/72] ext4: fix data offset overflow in ext4_xattr_fiemap() on 32-bit archs Greg Kroah-Hartman
2013-07-19  5:26 ` [ 55/72] ext4: fix overflow when counting used blocks on 32-bit architectures Greg Kroah-Hartman
2013-07-19  5:26 ` Greg Kroah-Hartman [this message]
2013-07-19  5:26 ` [ 57/72] ext4: dont show usrquota/grpquota twice in /proc/mounts Greg Kroah-Hartman
2013-07-19  5:26 ` [ 58/72] ext4: dont allow ext4_free_blocks() to fail due to ENOMEM Greg Kroah-Hartman
2013-07-19  5:26 ` [ 59/72] ARM: 7765/1: perf: Record the user-mode PC in the call chain Greg Kroah-Hartman
2013-07-19  5:26 ` [ 60/72] ARM: 7767/1: let the ASID allocator handle suspended animation Greg Kroah-Hartman
2013-07-19  5:26 ` [ 61/72] ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator Greg Kroah-Hartman
2013-07-19  5:26 ` [ 62/72] ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation Greg Kroah-Hartman
2013-07-19  5:26 ` [ 63/72] ARM: 7778/1: smp_twd: twd_update_frequency need be run on all online CPUs Greg Kroah-Hartman
2013-07-19  5:26 ` [ 64/72] ARM: dts: imx: cpus/cpu nodes dts updates Greg Kroah-Hartman
2013-07-19  5:26 ` [ 65/72] ARM: shmobile: r8a73a4: Fix resources for SCIFB0 Greg Kroah-Hartman
2013-07-19  5:26 ` [ 66/72] ARM: shmobile: emev2 GIO3 resource fix Greg Kroah-Hartman
2013-07-19  5:26 ` [ 67/72] ARM: mm: fix boot on SA1110 Assabet Greg Kroah-Hartman
2013-07-19  5:26 ` [ 68/72] drivers/dma/pl330.c: fix locking in pl330_free_chan_resources() Greg Kroah-Hartman
2013-07-19  5:26 ` [ 69/72] memcg, kmem: fix reference count handling on the error path Greg Kroah-Hartman
2013-07-19  5:26 ` [ 70/72] mm/memory-hotplug: fix lowmem count overflow when offline pages Greg Kroah-Hartman
2013-07-19  5:26 ` [ 71/72] Handle big endianness in NTLM (ntlmv2) authentication Greg Kroah-Hartman
2013-07-19  5:26 ` [ 72/72] UBIFS: correct mount message Greg Kroah-Hartman
2013-07-19  7:27 ` [ 00/72] 3.10.2-stable review Sven Joachim
2013-07-19 15:40   ` Greg Kroah-Hartman
2013-07-21  2:23     ` Satoru Takeuchi
2013-07-19 23:16 ` Shuah Khan
2013-07-19 23:16   ` Shuah Khan
2013-07-19 23:44   ` Greg Kroah-Hartman
2013-07-20  0:17 ` Stefan Lippers-Hollmann
2013-07-20  0:25   ` [please disregard] " Stefan Lippers-Hollmann
2013-07-21  7:56 ` Willy Tarreau
2013-07-21 15:50   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130719052603.685456377@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=lczerner@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lizhongfs@gmail.com \
    --cc=stable@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.