[PATCH v3 1/3] ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU

[cavokz@gmail.com (Domenico Andreoli)]

On Fri, Jul 26, 2013 at 12:42:13AM +0200, Hauke Mehrtens wrote:
> This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs.
> Currently just booting to a shell is working and nothing else, no
> Ethernet, wifi, flash, ...
> 
> This SoC is used in small office and home router with Broadcom SoCs.
> This code should support the BCM4707, BCM4708, BCM4709, BCM53010,
> BCM53011 and BCM53012 SoC. It uses one or two ARM Cortex A9
> Cores, some highlights are 2 PCIe 2.0 controllers, 4 Gigabit Ethernet
> MACs and a USB 3.0 host controller.
> 
> This SoC uses a dual core CPU, but this is currently not implemented.
> More information about this SoC can be found here:
> http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers
> 
> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
> ---
>  Documentation/devicetree/bindings/arm/bcm4708.txt |    8 +++
>  MAINTAINERS                                       |    8 +++
>  arch/arm/Makefile                                 |    2 +-
>  arch/arm/configs/multi_v7_defconfig               |    1 +
>  arch/arm/mach-bcm/Kconfig                         |   21 ++++++++
>  arch/arm/mach-bcm/Makefile                        |    1 +
>  arch/arm/mach-bcm/bcm5301x.c                      |   59 +++++++++++++++++++++
>  7 files changed, 99 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/bcm4708.txt
>  create mode 100644 arch/arm/mach-bcm/bcm5301x.c
> 
> diff --git a/Documentation/devicetree/bindings/arm/bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm4708.txt
> new file mode 100644
> index 0000000..6b0f49f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/bcm4708.txt
> @@ -0,0 +1,8 @@
> +Broadcom BCM4708 device tree bindings
> +-------------------------------------------
> +
> +Boards with the BCM4708 SoC shall have the following properties:
> +
> +Required root node property:
> +
> +compatible = "brcm,bcm4708";
> diff --git a/MAINTAINERS b/MAINTAINERS
> index bf61e04..b38f141 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1795,6 +1795,14 @@ F:	arch/arm/boot/dts/bcm2835*
>  F:	arch/arm/configs/bcm2835_defconfig
>  F:	drivers/*/*bcm2835*
>  
> +BROADCOM BCM5301X ARM ARCHICTURE
> +M:	Hauke Mehrtens <hauke@hauke-m.de>
> +L:	linux-arm-kernel at lists.infradead.org
> +S:	Maintained
> +F:	arch/arm/mach-bcm/bcm5301x.c
> +F:	arch/arm/boot/dts/bcm5301*
> +F:	arch/arm/boot/dts/bcm470*
> +
>  BROADCOM TG3 GIGABIT ETHERNET DRIVER
>  M:	Nithin Nayak Sujir <nsujir@broadcom.com>
>  M:	Michael Chan <mchan@broadcom.com>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index c0ac0f5..230b5d7 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -145,7 +145,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
>  # Machine directory name.  This list is sorted alphanumerically
>  # by CONFIG_* macro name.
>  machine-$(CONFIG_ARCH_AT91)		+= at91
> -machine-$(CONFIG_ARCH_BCM)		+= bcm
> +machine-y				+= bcm
>  machine-$(CONFIG_ARCH_BCM2835)		+= bcm2835
>  machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
>  machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index fe0bdc3..f449bd7 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -6,6 +6,7 @@ CONFIG_ARCH_MVEBU=y
>  CONFIG_MACH_ARMADA_370=y
>  CONFIG_MACH_ARMADA_XP=y
>  CONFIG_ARCH_BCM=y
> +CONFIG_ARCH_BCM5301X=y
>  CONFIG_GPIO_PCA953X=y
>  CONFIG_ARCH_HIGHBANK=y
>  CONFIG_ARCH_KEYSTONE=y
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index f112895..979433b 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -17,3 +17,24 @@ config ARCH_BCM
>  	  It currently supports the 'BCM281XX' family, which includes
>  	  BCM11130, BCM11140, BCM11351, BCM28145 and
>  	  BCM28155 variants.
> +
> +config ARCH_BCM5301X
> +	bool "Broadcom BCM470X / BCM5301X ARM SoC"

should be

	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7

or the entry will be visible also when no multi ARMv7 is wanted 

> +	select CPU_V7

not needed when ARCH_MULTI_V7 is configured and give issues if only
ARCH_MULTI_V6 is selected

> +	select ARM_GIC
> +	select HAVE_CLK
> +	select GENERIC_CLOCKEVENTS
> +	select GENERIC_TIME
> +	select ARM_GLOBAL_TIMER
> +	help
> +	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
> +
> +	  This is a network SoC line mostly used in home routers and
> +	  wifi access points.
> +	  This inclused the following SoC: BCM53010, BCM53011, BCM53012,
> +	  BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
> +	  BCM4708 and BCM4709.
> +
> +	  Do not confuse this with the BCM4760 which is a totally
> +	  different SoC or with the older BCM47XX and BCM53XX based
> +	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
> index 6adb6aec..b5b8046 100644
> --- a/arch/arm/mach-bcm/Makefile
> +++ b/arch/arm/mach-bcm/Makefile
> @@ -13,3 +13,4 @@
>  obj-$(CONFIG_ARCH_BCM)		:= board_bcm.o bcm_kona_smc.o bcm_kona_smc_asm.o
>  plus_sec := $(call as-instr,.arch_extension sec,+sec)
>  AFLAGS_bcm_kona_smc_asm.o	:=-Wa,-march=armv7-a$(plus_sec)
> +obj-$(CONFIG_ARCH_BCM5301X)	+= bcm5301x.o
> diff --git a/arch/arm/mach-bcm/bcm5301x.c b/arch/arm/mach-bcm/bcm5301x.c
> new file mode 100644
> index 0000000..5168f94
> --- /dev/null
> +++ b/arch/arm/mach-bcm/bcm5301x.c
> @@ -0,0 +1,59 @@
> +/*
> + * Broadcom BCM470X / BCM5301X ARM platform code.
> + *
> + * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
> + *
> + * Licensed under the GNU/GPL. See COPYING for details.
> + */
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/irqchip.h>

not needed

> +#include <linux/clocksource.h>
> +#include <linux/clk-provider.h>
> +
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +#include <asm/signal.h>
> +
> +static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
> +				 struct pt_regs *regs)
> +{
> +	/*
> +	 * These happen for no good reason, possibly left over from CFE
> +	 */
> +	pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
> +		addr, fsr);
> +
> +	/* Returning non-zero causes fault display and panic */
> +	return 0;
> +}
> +
> +static void __init bcm5301x_init_early(void)
> +{
> +	/* Install our hook */
> +	hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, 0,
> +			"imprecise external abort");
> +}
> +
> +static void __init bcm5301x_map_io(void)
> +{
> +	debug_ll_io_init();
> +}

not needed, debug_ll_io_init() is already invoked when .map_io is not set
in the descriptor below.

> +
> +static void __init bcm5301x_timer_init(void)
> +{
> +	of_clk_init(NULL);
> +	clocksource_of_init();
> +}
> +
> +static const char const *bcm5301x_dt_compat[] = {

missing a __initconst

> +	"brcm,bcm4708",
> +	NULL,
> +};
> +
> +DT_MACHINE_START(BCM5301X, "BCM5301X")
> +	.init_early = bcm5301x_init_early,
> +	.map_io = bcm5301x_map_io,
        ^^^^^^^^^^^^^^^^^^^^^^^^^^

> +	.init_time = bcm5301x_timer_init,
> +	.dt_compat = bcm5301x_dt_compat,
> +MACHINE_END
> -- 
> 1.7.10.4