All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Gao feng <gaofeng@cn.fujitsu.com>,
	YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>,
	Hannes Frederic Sowa <hannes@stressinduktion.org>,
	"David S. Miller" <davem@davemloft.net>
Subject: [ 14/79] ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size
Date: Fri, 26 Jul 2013 13:47:04 -0700	[thread overview]
Message-ID: <20130726204723.425607856@linuxfoundation.org> (raw)
In-Reply-To: <20130726204721.849052763@linuxfoundation.org>

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <hannes@stressinduktion.org>

[ Upstream commit 75a493e60ac4bbe2e977e7129d6d8cbb0dd236be ]

If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track
of this when appending the second frame on a corked socket. This results
in the following splat:

[37598.993962] ------------[ cut here ]------------
[37598.994008] kernel BUG at net/core/skbuff.c:2064!
[37598.994008] invalid opcode: 0000 [#1] SMP
[37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat
+nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi
+scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm
[37598.994008]  snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc
+dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video
[37598.994008] CPU 0
[37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG
[37598.994008] RIP: 0010:[<ffffffff815443a5>]  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008] RSP: 0018:ffff88003670da18  EFLAGS: 00010202
[37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0
[37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00
[37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040
[37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8
[37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000
[37598.994008] FS:  00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
[37598.994008] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0
[37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0)
[37598.994008] Stack:
[37598.994008]  ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8
[37598.994008]  ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200
[37598.994008]  0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4
[37598.994008] Call Trace:
[37598.994008]  [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0
[37598.994008]  [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0
[37598.994008]  [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40
[37598.994008]  [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10
[37598.994008]  [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90
[37598.994008]  [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0
[37598.994008]  [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30
[37598.994008]  [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0
[37598.994008]  [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0
[37598.994008]  [<ffffffff8153d97d>] sys_sendto+0x12d/0x180
[37598.994008]  [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0
[37598.994008]  [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240
[37598.994008]  [<ffffffff8166a7e7>] tracesys+0xdd/0xe2
[37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48
[37598.994008] RIP  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008]  RSP <ffff88003670da18>
[37599.007323] ---[ end trace d69f6a17f8ac8eee ]---

While there, also check if path mtu discovery is activated for this
socket. The logic was adapted from ip6_append_data when first writing
on the corked socket.

This bug was introduced with commit
0c1833797a5a6ec23ea9261d979aa18078720b74 ("ipv6: fix incorrect ipsec
fragment").

v2:
a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE.
b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao
   feng, thanks!).
c) Change mtu to unsigned int, else we get a warning about
   non-matching types because of the min()-macro type-check.

Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_output.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1098,11 +1098,12 @@ static inline struct ipv6_rt_hdr *ip6_rt
 	return src ? kmemdup(src, (src->hdrlen + 1) * 8, gfp) : NULL;
 }
 
-static void ip6_append_data_mtu(int *mtu,
+static void ip6_append_data_mtu(unsigned int *mtu,
 				int *maxfraglen,
 				unsigned int fragheaderlen,
 				struct sk_buff *skb,
-				struct rt6_info *rt)
+				struct rt6_info *rt,
+				bool pmtuprobe)
 {
 	if (!(rt->dst.flags & DST_XFRM_TUNNEL)) {
 		if (skb == NULL) {
@@ -1114,7 +1115,9 @@ static void ip6_append_data_mtu(int *mtu
 			 * this fragment is not first, the headers
 			 * space is regarded as data space.
 			 */
-			*mtu = dst_mtu(rt->dst.path);
+			*mtu = min(*mtu, pmtuprobe ?
+				   rt->dst.dev->mtu :
+				   dst_mtu(rt->dst.path));
 		}
 		*maxfraglen = ((*mtu - fragheaderlen) & ~7)
 			      + fragheaderlen - sizeof(struct frag_hdr);
@@ -1131,11 +1134,10 @@ int ip6_append_data(struct sock *sk, int
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct inet_cork *cork;
 	struct sk_buff *skb, *skb_prev = NULL;
-	unsigned int maxfraglen, fragheaderlen;
+	unsigned int maxfraglen, fragheaderlen, mtu;
 	int exthdrlen;
 	int dst_exthdrlen;
 	int hh_len;
-	int mtu;
 	int copy;
 	int err;
 	int offset = 0;
@@ -1292,7 +1294,9 @@ alloc_new_skb:
 			/* update mtu and maxfraglen if necessary */
 			if (skb == NULL || skb_prev == NULL)
 				ip6_append_data_mtu(&mtu, &maxfraglen,
-						    fragheaderlen, skb, rt);
+						    fragheaderlen, skb, rt,
+						    np->pmtudisc ==
+						    IPV6_PMTUDISC_PROBE);
 
 			skb_prev = skb;
 



  parent reply	other threads:[~2013-07-26 21:45 UTC|newest]

Thread overview: 101+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-26 20:46 [ 00/79] 3.10.4-stable review Greg Kroah-Hartman
2013-07-26 20:46 ` [ 01/79] writeback: Fix periodic writeback after fs mount Greg Kroah-Hartman
2013-07-26 20:46 ` [ 02/79] sparc32: vm_area_struct access for old Sun SPARCs Greg Kroah-Hartman
2013-07-27 15:39   ` Ben Hutchings
2013-07-26 20:46 ` [ 03/79] ipv6: only apply anti-spoofing checks to not-pointopoint tunnels Greg Kroah-Hartman
2013-07-26 20:46 ` [ 04/79] neighbour: fix a race in neigh_destroy() Greg Kroah-Hartman
2013-07-26 20:46 ` [ 05/79] x25: Fix broken locking in ioctl error paths Greg Kroah-Hartman
2013-07-26 20:46 ` [ 06/79] net: Swap ver and type in pppoe_hdr Greg Kroah-Hartman
2013-07-27 15:58   ` Ben Hutchings
2013-07-28  0:55     ` David Miller
2013-07-28  3:14       ` Ben Hutchings
2013-07-28  4:16         ` Greg KH
2013-07-28  4:39           ` David Miller
2013-07-28 18:29             ` Greg KH
2013-07-26 20:46 ` [ 07/79] gre: fix a regression in ioctl Greg Kroah-Hartman
2013-07-26 20:46 ` [ 08/79] vti: remove duplicated code to fix a memory leak Greg Kroah-Hartman
2013-07-26 20:46 ` [ 09/79] ipv6,mcast: always hold idev->lock before mca_lock Greg Kroah-Hartman
2013-07-26 20:47 ` [ 10/79] ip_tunnels: Use skb-len to PMTU check Greg Kroah-Hartman
2013-07-26 20:47 ` [ 11/79] l2tp: add missing .owner to struct pppox_proto Greg Kroah-Hartman
2013-07-26 20:47 ` [ 12/79] ipip: fix a regression in ioctl Greg Kroah-Hartman
2013-07-26 20:47 ` [ 13/79] ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data Greg Kroah-Hartman
2013-07-26 20:47 ` Greg Kroah-Hartman [this message]
2013-07-26 20:47 ` [ 15/79] ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available Greg Kroah-Hartman
2013-07-26 20:47 ` [ 16/79] sfc: Fix memory leak when discarding scattered packets Greg Kroah-Hartman
2013-07-26 20:47 ` [ 17/79] net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Greg Kroah-Hartman
2013-07-26 20:47 ` [ 18/79] virtio: support unlocked queue poll Greg Kroah-Hartman
2013-07-26 20:47 ` [ 19/79] virtio_net: fix race in RX VQ processing Greg Kroah-Hartman
2013-07-26 20:47 ` [ 20/79] vhost-net: fix use-after-free in vhost_net_flush Greg Kroah-Hartman
2013-07-26 20:47 ` [ 21/79] sunvnet: vnet_port_remove must call unregister_netdev Greg Kroah-Hartman
2013-07-26 20:47 ` [ 22/79] ifb: fix rcu_sched self-detected stalls Greg Kroah-Hartman
2013-07-26 20:47 ` [ 23/79] tuntap: correctly linearize skb when zerocopy is used Greg Kroah-Hartman
2013-07-26 20:47 ` [ 24/79] macvtap: " Greg Kroah-Hartman
2013-07-26 20:47 ` [ 25/79] ipv6: in case of link failure remove route directly instead of letting it expire Greg Kroah-Hartman
2013-07-26 20:47 ` [ 26/79] 9p: fix off by one causing access violations and memory corruption Greg Kroah-Hartman
2013-07-26 20:47 ` [ 27/79] alx: fix lockdep annotation Greg Kroah-Hartman
2013-07-26 20:47 ` [ 28/79] ipv6: fix route selection if kernel is not compiled with CONFIG_IPV6_ROUTER_PREF Greg Kroah-Hartman
2013-07-26 20:47 ` [ 29/79] dummy: fix oops when loading the dummy failed Greg Kroah-Hartman
2013-07-26 20:47 ` [ 30/79] ifb: fix oops when loading the ifb failed Greg Kroah-Hartman
2013-07-26 20:47 ` [ 31/79] gre: Fix MTU sizing check for gretap tunnels Greg Kroah-Hartman
2013-07-26 20:47 ` [ 32/79] ipv6: only static routes qualify for equal cost multipathing Greg Kroah-Hartman
2013-07-26 20:47 ` [ 33/79] atl1e: fix dma mapping warnings Greg Kroah-Hartman
2013-07-26 20:47 ` [ 34/79] atl1e: unmap partially mapped skb on dma error and free skb Greg Kroah-Hartman
2013-07-26 20:47 ` [ 35/79] ipv4: set transport header earlier Greg Kroah-Hartman
2013-07-26 20:47 ` [ 36/79] be2net: Fix to avoid hardware workaround when not needed Greg Kroah-Hartman
2013-07-26 20:47 ` [ 37/79] hyperv: Fix the NETIF_F_SG flag setting in netvsc Greg Kroah-Hartman
2013-07-26 20:47 ` [ 38/79] pkt_sched: sch_qfq: remove a source of high packet delay/jitter Greg Kroah-Hartman
2013-07-26 20:47 ` [ 39/79] tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS Greg Kroah-Hartman
2013-07-26 20:47 ` [ 40/79] macvtap: " Greg Kroah-Hartman
2013-07-26 20:47 ` [ 41/79] vlan: mask vlan prio bits Greg Kroah-Hartman
2013-07-26 20:47 ` [ 42/79] vlan: fix a race in egress prio management Greg Kroah-Hartman
2013-07-27 16:55   ` Ben Hutchings
2013-07-27 17:38     ` Eric Dumazet
2013-07-27 17:58       ` Ben Hutchings
2013-07-26 20:47 ` [ 43/79] MIPS: Oceton: Fix build error Greg Kroah-Hartman
2013-07-26 20:47 ` [ 44/79] RAPIDIO: IDT_GEN2: " Greg Kroah-Hartman
2013-07-26 20:47 ` [ 45/79] fuse: readdirplus: fix dentry leak Greg Kroah-Hartman
2013-07-26 20:47 ` [ 46/79] fuse: readdirplus: fix instantiate Greg Kroah-Hartman
2013-07-26 20:47 ` [ 47/79] fuse: readdirplus: sanity checks Greg Kroah-Hartman
2013-07-26 20:47 ` [ 48/79] bcache: Fix a dumb race Greg Kroah-Hartman
2013-07-26 20:47 ` [ 49/79] bcache: Advertise that flushes are supported Greg Kroah-Hartman
2013-07-26 20:47 ` [ 50/79] bcache: Shutdown fix Greg Kroah-Hartman
2013-07-26 20:47 ` [ 51/79] bcache: Fix a sysfs splat on shutdown Greg Kroah-Hartman
2013-07-26 20:47 ` [ 52/79] bcache: Fix GC_SECTORS_USED() calculation Greg Kroah-Hartman
2013-07-26 20:47 ` [ 53/79] bcache: Journal replay fix Greg Kroah-Hartman
2013-07-26 20:47 ` [ 54/79] EDAC: Fix lockdep splat Greg Kroah-Hartman
2013-07-26 20:47 ` [ 55/79] SCSI: mpt3sas: Infinite loops can occur if MPI2_IOCSTATUS_CONFIG_INVALID_PAGE is not returned Greg Kroah-Hartman
2013-07-26 20:47 ` [ 56/79] SCSI: mpt3sas: fix for kernel panic when driver loads with HBA conected to non LUN 0 configured expander Greg Kroah-Hartman
2013-07-26 20:47 ` [ 57/79] SCSI: megaraid_sas: fix memory leak if SGL has zero length entries Greg Kroah-Hartman
2013-07-26 20:47 ` [ 58/79] lib/Kconfig.debug: Restrict FRAME_POINTER for MIPS Greg Kroah-Hartman
2013-07-27 14:05   ` Steven J. Hill
2013-07-27 14:05     ` Steven J. Hill
2013-07-26 20:47 ` [ 59/79] usb: serial: option: blacklist ONDA MT689DC QMI interface Greg Kroah-Hartman
2013-07-26 20:47 ` [ 60/79] usb: option: add TP-LINK MA260 Greg Kroah-Hartman
2013-07-26 20:47 ` [ 61/79] usb: serial: option: add Olivetti Olicard 200 Greg Kroah-Hartman
2013-07-26 20:47 ` [ 62/79] usb: serial: option.c: remove ONDA MT825UP product ID fromdriver Greg Kroah-Hartman
2013-07-26 20:47 ` [ 63/79] USB: option: append Petatel NP10T device to GSM modems list Greg Kroah-Hartman
2013-07-26 20:47 ` [ 64/79] USB: option: add D-Link DWM-152/C1 and DWM-156/C1 Greg Kroah-Hartman
2013-07-26 20:47 ` [ 65/79] usb: serial: option: Add ONYX 3G device support Greg Kroah-Hartman
2013-07-26 20:47 ` [ 66/79] ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART Greg Kroah-Hartman
2013-07-26 20:47 ` [ 67/79] ARM: footbridge: fix overlapping PCI mappings Greg Kroah-Hartman
2013-07-26 20:47 ` [ 68/79] usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter Greg Kroah-Hartman
2013-07-26 20:47 ` [ 69/79] USB: cp210x: add MMB and PI ZigBee USB Device Support Greg Kroah-Hartman
2013-07-26 20:48 ` [ 70/79] usb: cp210x support SEL C662 Vendor/Device Greg Kroah-Hartman
2013-07-26 20:48 ` [ 71/79] ext4: fix error handling in ext4_ext_truncate() Greg Kroah-Hartman
2013-07-27 21:33   ` Ben Hutchings
2013-07-28 11:40     ` Theodore Ts'o
2013-07-28 18:27       ` Greg Kroah-Hartman
2013-07-28 21:15       ` Ben Hutchings
2013-07-26 20:48 ` [ 72/79] PM / Sleep: avoid autosleep in shutdown progress Greg Kroah-Hartman
2013-07-26 20:48 ` [ 73/79] media: saa7134: Fix unlocked snd_pcm_stop() call Greg Kroah-Hartman
2013-07-26 20:48 ` [ 74/79] media: dmxdev: remove dvb_ringbuffer_flush() on writer side Greg Kroah-Hartman
2013-07-26 20:48 ` [ 75/79] lockd: protect nlm_blocked access in nlmsvc_retry_blocked Greg Kroah-Hartman
2013-07-26 20:48 ` [ 76/79] hrtimers: Move SMP function call to thread context Greg Kroah-Hartman
2013-07-26 20:48   ` Greg Kroah-Hartman
2013-07-26 20:48 ` [ 77/79] ALSA: hda - Remove NO_PRESENCE bit override for Dell 1420n Laptop Greg Kroah-Hartman
2013-07-26 20:48 ` [ 78/79] ALSA: usb-audio: 6fire: return correct XRUN indication Greg Kroah-Hartman
2013-07-26 20:48 ` [ 79/79] ALSA: hda - Fix EAPD GPIO control for Sigmatel codecs Greg Kroah-Hartman
2013-07-27  0:19 ` [ 00/79] 3.10.4-stable review Shuah Khan
2013-07-27  0:57   ` Greg Kroah-Hartman
2013-07-28  0:48 ` linux
2013-07-28 18:26   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130726204723.425607856@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=davem@davemloft.net \
    --cc=gaofeng@cn.fujitsu.com \
    --cc=hannes@stressinduktion.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.