From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Hannes Frederic Sowa <hannes@stressinduktion.org>,
Nicolas Dichtel <nicolas.dichtel@6wind.com>,
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>,
"David S. Miller" <davem@davemloft.net>
Subject: [ 35/59] ipv6: in case of link failure remove route directly instead of letting it expire
Date: Fri, 26 Jul 2013 13:52:59 -0700 [thread overview]
Message-ID: <20130726205017.580134330@linuxfoundation.org> (raw)
In-Reply-To: <20130726205013.795696531@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Frederic Sowa <hannes@stressinduktion.org>
[ Upstream commit 1eb4f758286884e7566627164bca4c4a16952a83 ]
We could end up expiring a route which is part of an ecmp route set. Doing
so would invalidate the rt->rt6i_nsiblings calculations and could provoke
the following panic:
[ 80.144667] ------------[ cut here ]------------
[ 80.145172] kernel BUG at net/ipv6/ip6_fib.c:733!
[ 80.145172] invalid opcode: 0000 [#1] SMP
[ 80.145172] Modules linked in: 8021q nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables
+snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer virtio_balloon snd soundcore i2c_piix4 i2c_core virtio_net virtio_blk
[ 80.145172] CPU: 1 PID: 786 Comm: ping6 Not tainted 3.10.0+ #118
[ 80.145172] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 80.145172] task: ffff880117fa0000 ti: ffff880118770000 task.ti: ffff880118770000
[ 80.145172] RIP: 0010:[<ffffffff815f3b5d>] [<ffffffff815f3b5d>] fib6_add+0x75d/0x830
[ 80.145172] RSP: 0018:ffff880118771798 EFLAGS: 00010202
[ 80.145172] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011350e480
[ 80.145172] RDX: ffff88011350e238 RSI: 0000000000000004 RDI: ffff88011350f738
[ 80.145172] RBP: ffff880118771848 R08: ffff880117903280 R09: 0000000000000001
[ 80.145172] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011350f680
[ 80.145172] R13: ffff880117903280 R14: ffff880118771890 R15: ffff88011350ef90
[ 80.145172] FS: 00007f02b5127740(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000
[ 80.145172] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 80.145172] CR2: 00007f981322a000 CR3: 00000001181b1000 CR4: 00000000000006e0
[ 80.145172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 80.145172] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 80.145172] Stack:
[ 80.145172] 0000000000000001 ffff880100000000 ffff880100000000 ffff880117903280
[ 80.145172] 0000000000000000 ffff880119a4cf00 0000000000000400 00000000000007fa
[ 80.145172] 0000000000000000 0000000000000000 0000000000000000 ffff88011350f680
[ 80.145172] Call Trace:
[ 80.145172] [<ffffffff815eeceb>] ? rt6_bind_peer+0x4b/0x90
[ 80.145172] [<ffffffff815ed985>] __ip6_ins_rt+0x45/0x70
[ 80.145172] [<ffffffff815eee35>] ip6_ins_rt+0x35/0x40
[ 80.145172] [<ffffffff815ef1e4>] ip6_pol_route.isra.44+0x3a4/0x4b0
[ 80.145172] [<ffffffff815ef34a>] ip6_pol_route_output+0x2a/0x30
[ 80.145172] [<ffffffff81616077>] fib6_rule_action+0xd7/0x210
[ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30
[ 80.145172] [<ffffffff81553026>] fib_rules_lookup+0xc6/0x140
[ 80.145172] [<ffffffff81616374>] fib6_rule_lookup+0x44/0x80
[ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30
[ 80.145172] [<ffffffff815edea3>] ip6_route_output+0x73/0xb0
[ 80.145172] [<ffffffff815dfdf3>] ip6_dst_lookup_tail+0x2c3/0x2e0
[ 80.145172] [<ffffffff813007b1>] ? list_del+0x11/0x40
[ 80.145172] [<ffffffff81082a4c>] ? remove_wait_queue+0x3c/0x50
[ 80.145172] [<ffffffff815dfe4d>] ip6_dst_lookup_flow+0x3d/0xa0
[ 80.145172] [<ffffffff815fda77>] rawv6_sendmsg+0x267/0xc20
[ 80.145172] [<ffffffff815a8a83>] inet_sendmsg+0x63/0xb0
[ 80.145172] [<ffffffff8128eb93>] ? selinux_socket_sendmsg+0x23/0x30
[ 80.145172] [<ffffffff815218d6>] sock_sendmsg+0xa6/0xd0
[ 80.145172] [<ffffffff81524a68>] SYSC_sendto+0x128/0x180
[ 80.145172] [<ffffffff8109825c>] ? update_curr+0xec/0x170
[ 80.145172] [<ffffffff81041d09>] ? kvm_clock_get_cycles+0x9/0x10
[ 80.145172] [<ffffffff810afd1e>] ? __getnstimeofday+0x3e/0xd0
[ 80.145172] [<ffffffff8152509e>] SyS_sendto+0xe/0x10
[ 80.145172] [<ffffffff8164efd9>] system_call_fastpath+0x16/0x1b
[ 80.145172] Code: fe ff ff 41 f6 45 2a 06 0f 85 ca fe ff ff 49 8b 7e 08 4c 89 ee e8 94 ef ff ff e9 b9 fe ff ff 48 8b 82 28 05 00 00 e9 01 ff ff ff <0f> 0b 49 8b 54 24 30 0d 00 00 40 00 89 83 14 01 00 00 48 89 53
[ 80.145172] RIP [<ffffffff815f3b5d>] fib6_add+0x75d/0x830
[ 80.145172] RSP <ffff880118771798>
[ 80.387413] ---[ end trace 02f20b7a8b81ed95 ]---
[ 80.390154] Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv6/route.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1032,10 +1032,13 @@ static void ip6_link_failure(struct sk_b
rt = (struct rt6_info *) skb_dst(skb);
if (rt) {
- if (rt->rt6i_flags & RTF_CACHE)
- rt6_update_expires(rt, 0);
- else if (rt->rt6i_node && (rt->rt6i_flags & RTF_DEFAULT))
+ if (rt->rt6i_flags & RTF_CACHE) {
+ dst_hold(&rt->dst);
+ if (ip6_del_rt(rt))
+ dst_free(&rt->dst);
+ } else if (rt->rt6i_node && (rt->rt6i_flags & RTF_DEFAULT)) {
rt->rt6i_node->fn_sernum = -1;
+ }
}
}
next prev parent reply other threads:[~2013-07-26 20:54 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-26 20:52 [ 00/59] 3.4.55-stable review Greg Kroah-Hartman
2013-07-26 20:52 ` [ 01/59] ext3: fix data=journal fast mount/umount hang Greg Kroah-Hartman
2013-07-26 20:52 ` [ 02/59] libata: skip SRST for all SIMG [34]7x port-multipliers Greg Kroah-Hartman
2013-07-26 20:52 ` [ 03/59] ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs Greg Kroah-Hartman
2013-07-26 20:52 ` [ 04/59] ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK Greg Kroah-Hartman
2013-07-26 20:52 ` [ 05/59] tick: Prevent uncontrolled switch to oneshot mode Greg Kroah-Hartman
2013-07-26 20:52 ` [ 06/59] rt2x00: read 5GHz TX power values from the correct offset Greg Kroah-Hartman
2013-07-26 20:52 ` [ 07/59] ath9k: Do not assign noise for NULL caldata Greg Kroah-Hartman
2013-07-26 20:52 ` [ 08/59] SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down Greg Kroah-Hartman
2013-07-26 20:52 ` [ 09/59] SCSI: mpt2sas: fix firmware failure with wrong task attribute Greg Kroah-Hartman
2013-07-26 20:52 ` [ 10/59] tracing: Use current_uid() for critical time tracing Greg Kroah-Hartman
2013-07-26 20:52 ` [ 11/59] iommu/amd: Only unmap large pages from the first pte Greg Kroah-Hartman
2013-07-26 20:52 ` [ 12/59] perf: Clone child context from parent context pmu Greg Kroah-Hartman
2013-07-26 20:52 ` [ 13/59] perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario Greg Kroah-Hartman
2013-07-26 20:52 ` [ 14/59] perf: Fix perf_lock_task_context() vs RCU Greg Kroah-Hartman
2013-07-26 20:52 ` [ 15/59] sparc32: vm_area_struct access for old Sun SPARCs Greg Kroah-Hartman
2013-07-27 21:45 ` Ben Hutchings
2013-07-28 2:27 ` David Miller
2013-07-28 18:37 ` Greg KH
2013-07-26 20:52 ` [ 16/59] sparc64 address-congruence property Greg Kroah-Hartman
2013-07-26 20:52 ` Greg Kroah-Hartman
2013-07-26 20:52 ` [ 17/59] sparc: tsb must be flushed before tlb Greg Kroah-Hartman
2013-07-26 20:52 ` [ 18/59] bridge: fix switched interval for MLD Query types Greg Kroah-Hartman
2013-07-26 20:52 ` [ 19/59] ipv4: Fixed MD5 key lookups when adding/ removing MD5 to/ from TCP sockets Greg Kroah-Hartman
2013-07-26 20:52 ` [ 20/59] ipv6: dont call addrconf_dst_alloc again when enable lo Greg Kroah-Hartman
2013-07-26 20:52 ` [ 21/59] macvtap: fix recovery from gup errors Greg Kroah-Hartman
2013-07-26 20:52 ` [ 22/59] ipv6: ip6_sk_dst_check() must not assume ipv6 dst Greg Kroah-Hartman
2013-07-26 20:52 ` [ 23/59] af_key: fix info leaks in notify messages Greg Kroah-Hartman
2013-07-26 20:52 ` Greg Kroah-Hartman
2013-07-26 20:52 ` [ 24/59] sh_eth: fix unhandled RFE interrupt Greg Kroah-Hartman
2013-07-26 20:52 ` [ 25/59] neighbour: fix a race in neigh_destroy() Greg Kroah-Hartman
2013-07-26 20:52 ` [ 26/59] x25: Fix broken locking in ioctl error paths Greg Kroah-Hartman
2013-07-26 20:52 ` [ 27/59] net: Swap ver and type in pppoe_hdr Greg Kroah-Hartman
2013-07-26 20:52 ` [ 28/59] ipv6,mcast: always hold idev->lock before mca_lock Greg Kroah-Hartman
2013-07-26 20:52 ` [ 29/59] l2tp: add missing .owner to struct pppox_proto Greg Kroah-Hartman
2013-07-26 20:52 ` [ 30/59] ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data Greg Kroah-Hartman
2013-07-26 20:52 ` [ 31/59] ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size Greg Kroah-Hartman
2013-07-26 20:52 ` [ 32/59] sunvnet: vnet_port_remove must call unregister_netdev Greg Kroah-Hartman
2013-07-26 20:52 ` [ 33/59] ifb: fix rcu_sched self-detected stalls Greg Kroah-Hartman
2013-07-26 20:52 ` [ 34/59] macvtap: correctly linearize skb when zerocopy is used Greg Kroah-Hartman
2013-07-26 20:52 ` Greg Kroah-Hartman [this message]
2013-07-26 20:53 ` [ 36/59] 9p: fix off by one causing access violations and memory corruption Greg Kroah-Hartman
2013-07-26 20:53 ` [ 37/59] dummy: fix oops when loading the dummy failed Greg Kroah-Hartman
2013-07-26 20:53 ` [ 38/59] ifb: fix oops when loading the ifb failed Greg Kroah-Hartman
2013-07-26 20:53 ` [ 39/59] atl1e: fix dma mapping warnings Greg Kroah-Hartman
2013-07-26 20:53 ` [ 40/59] atl1e: unmap partially mapped skb on dma error and free skb Greg Kroah-Hartman
2013-07-26 20:53 ` [ 41/59] vlan: fix a race in egress prio management Greg Kroah-Hartman
2013-07-26 20:53 ` [ 42/59] writeback: Fix periodic writeback after fs mount Greg Kroah-Hartman
2013-07-26 20:53 ` [ 43/59] SCSI: megaraid_sas: fix memory leak if SGL has zero length entries Greg Kroah-Hartman
2013-07-26 20:53 ` [ 44/59] SCSI: Fix incorrect memset in bnx2fc_parse_fcp_rsp Greg Kroah-Hartman
2013-07-26 20:53 ` [ 45/59] [SCSI] zfcp: block queue limits with data router Greg Kroah-Hartman
2013-07-26 20:53 ` [ 46/59] usb: serial: option: blacklist ONDA MT689DC QMI interface Greg Kroah-Hartman
2013-07-26 20:53 ` [ 47/59] usb: option: add TP-LINK MA260 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 48/59] usb: serial: option: add Olivetti Olicard 200 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 49/59] usb: serial: option.c: remove ONDA MT825UP product ID fromdriver Greg Kroah-Hartman
2013-07-26 20:53 ` [ 50/59] USB: option: append Petatel NP10T device to GSM modems list Greg Kroah-Hartman
2013-07-26 20:53 ` [ 51/59] USB: option: add D-Link DWM-152/C1 and DWM-156/C1 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 52/59] usb: serial: option: Add ONYX 3G device support Greg Kroah-Hartman
2013-07-26 20:53 ` [ 53/59] usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter Greg Kroah-Hartman
2013-07-26 20:53 ` [ 54/59] USB: cp210x: add MMB and PI ZigBee USB Device Support Greg Kroah-Hartman
2013-07-26 20:53 ` [ 55/59] usb: cp210x support SEL C662 Vendor/Device Greg Kroah-Hartman
2013-07-26 20:53 ` [ 56/59] lockd: protect nlm_blocked access in nlmsvc_retry_blocked Greg Kroah-Hartman
2013-07-26 20:53 ` [ 57/59] tracing: Fix irqs-off tag display in syscall tracing Greg Kroah-Hartman
2013-07-26 20:53 ` [ 58/59] hrtimers: Move SMP function call to thread context Greg Kroah-Hartman
2013-07-26 20:53 ` Greg Kroah-Hartman
2013-07-26 20:53 ` [ 59/59] ALSA: usb-audio: 6fire: return correct XRUN indication Greg Kroah-Hartman
2013-07-27 21:28 ` [ 00/59] 3.4.55-stable review linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130726205017.580134330@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=hannes@stressinduktion.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.dichtel@6wind.com \
--cc=stable@vger.kernel.org \
--cc=yoshfuji@linux-ipv6.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.