From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Enrico Mioso <mrkiko.rs@gmail.com>
Subject: [ 34/45] usb: serial: option.c: remove ONDA MT825UP product ID fromdriver
Date: Fri, 26 Jul 2013 13:57:54 -0700 [thread overview]
Message-ID: <20130726205658.689432388@linuxfoundation.org> (raw)
In-Reply-To: <20130726205654.896050165@linuxfoundation.org>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Enrico Mioso <mrkiko.rs@gmail.com>
commit 878c69aae986ae97084458c0183a8c0a059865b1 upstream.
Some (very few) early devices like mine, where not exposting a proper CDC
descriptor. This was fixed with an immediate firmware update from the vendor,
and pre-installed on newer devices.
So actual devices can be driven by cdc_acm.c + cdc_ether.c.
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 7 -------
1 file changed, 7 deletions(-)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -353,12 +353,6 @@ static void option_instat_callback(struc
#define CELOT_VENDOR_ID 0x211f
#define CELOT_PRODUCT_CT680M 0x6801
-/* ONDA Communication vendor id */
-#define ONDA_VENDOR_ID 0x1ee8
-
-/* ONDA MT825UP HSDPA 14.2 modem */
-#define ONDA_MT825UP 0x000b
-
/* Samsung products */
#define SAMSUNG_VENDOR_ID 0x04e8
#define SAMSUNG_PRODUCT_GT_B3730 0x6889
@@ -1282,7 +1276,6 @@ static const struct usb_device_id option
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) },
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) },
next prev parent reply other threads:[~2013-07-26 21:03 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-26 20:57 [ 00/45] 3.0.88-stable review Greg Kroah-Hartman
2013-07-26 20:57 ` [ 01/45] tick: Prevent uncontrolled switch to oneshot mode Greg Kroah-Hartman
2013-07-26 20:57 ` [ 02/45] ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK Greg Kroah-Hartman
2013-07-26 20:57 ` [ 03/45] rt2x00: read 5GHz TX power values from the correct offset Greg Kroah-Hartman
2013-07-26 20:57 ` [ 04/45] SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down Greg Kroah-Hartman
2013-07-26 20:57 ` [ 05/45] SCSI: mpt2sas: fix firmware failure with wrong task attribute Greg Kroah-Hartman
2013-07-26 20:57 ` [ 06/45] tracing: Use current_uid() for critical time tracing Greg Kroah-Hartman
2013-07-26 20:57 ` [ 07/45] perf: Clone child context from parent context pmu Greg Kroah-Hartman
2013-07-26 20:57 ` [ 08/45] perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario Greg Kroah-Hartman
2013-07-26 20:57 ` [ 09/45] perf: Fix perf_lock_task_context() vs RCU Greg Kroah-Hartman
2013-07-26 20:57 ` [ 10/45] sparc32: vm_area_struct access for old Sun SPARCs Greg Kroah-Hartman
2013-07-26 20:57 ` [ 11/45] sparc64 address-congruence property Greg Kroah-Hartman
2013-07-26 20:57 ` Greg Kroah-Hartman
2013-07-26 20:57 ` [ 12/45] sparc: tsb must be flushed before tlb Greg Kroah-Hartman
2013-07-26 20:57 ` [ 13/45] bridge: fix switched interval for MLD Query types Greg Kroah-Hartman
2013-07-26 20:57 ` [ 14/45] ipv6: dont call addrconf_dst_alloc again when enable lo Greg Kroah-Hartman
2013-07-26 20:57 ` [ 15/45] ipv6: ip6_sk_dst_check() must not assume ipv6 dst Greg Kroah-Hartman
2013-07-26 20:57 ` [ 16/45] af_key: fix info leaks in notify messages Greg Kroah-Hartman
2013-07-26 20:57 ` Greg Kroah-Hartman
2013-07-26 20:57 ` [ 17/45] neighbour: fix a race in neigh_destroy() Greg Kroah-Hartman
2013-07-26 20:57 ` [ 18/45] x25: Fix broken locking in ioctl error paths Greg Kroah-Hartman
2013-07-26 20:57 ` [ 19/45] net: Swap ver and type in pppoe_hdr Greg Kroah-Hartman
2013-07-26 20:57 ` [ 20/45] ipv6,mcast: always hold idev->lock before mca_lock Greg Kroah-Hartman
2013-07-26 20:57 ` [ 21/45] l2tp: add missing .owner to struct pppox_proto Greg Kroah-Hartman
2013-07-26 20:57 ` [ 22/45] ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data Greg Kroah-Hartman
2013-07-26 20:57 ` [ 23/45] sunvnet: vnet_port_remove must call unregister_netdev Greg Kroah-Hartman
2013-07-26 20:57 ` [ 24/45] ifb: fix rcu_sched self-detected stalls Greg Kroah-Hartman
2013-07-26 20:57 ` [ 25/45] dummy: fix oops when loading the dummy failed Greg Kroah-Hartman
2013-07-26 20:57 ` [ 26/45] ifb: fix oops when loading the ifb failed Greg Kroah-Hartman
2013-07-26 20:57 ` [ 27/45] vlan: fix a race in egress prio management Greg Kroah-Hartman
2013-07-26 20:57 ` [ 28/45] writeback: Fix periodic writeback after fs mount Greg Kroah-Hartman
2013-07-26 20:57 ` [ 29/45] SCSI: megaraid_sas: fix memory leak if SGL has zero length entries Greg Kroah-Hartman
2013-07-26 20:57 ` [ 30/45] SCSI: Fix incorrect memset in bnx2fc_parse_fcp_rsp Greg Kroah-Hartman
2013-07-26 20:57 ` [ 31/45] usb: serial: option: blacklist ONDA MT689DC QMI interface Greg Kroah-Hartman
2013-07-26 20:57 ` [ 32/45] usb: option: add TP-LINK MA260 Greg Kroah-Hartman
2013-07-26 20:57 ` [ 33/45] usb: serial: option: add Olivetti Olicard 200 Greg Kroah-Hartman
2013-07-26 20:57 ` Greg Kroah-Hartman [this message]
2013-07-26 20:57 ` [ 35/45] USB: option: append Petatel NP10T device to GSM modems list Greg Kroah-Hartman
2013-07-26 20:57 ` [ 36/45] USB: option: add D-Link DWM-152/C1 and DWM-156/C1 Greg Kroah-Hartman
2013-07-26 20:57 ` [ 37/45] usb: serial: option: Add ONYX 3G device support Greg Kroah-Hartman
2013-07-26 20:57 ` [ 38/45] usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter Greg Kroah-Hartman
2013-07-26 20:57 ` [ 39/45] USB: cp210x: add MMB and PI ZigBee USB Device Support Greg Kroah-Hartman
2013-07-26 20:58 ` [ 40/45] usb: cp210x support SEL C662 Vendor/Device Greg Kroah-Hartman
2013-07-26 20:58 ` [ 41/45] lockd: protect nlm_blocked access in nlmsvc_retry_blocked Greg Kroah-Hartman
2013-07-26 20:58 ` [ 42/45] tracing: Fix irqs-off tag display in syscall tracing Greg Kroah-Hartman
2013-07-26 20:58 ` [ 43/45] hrtimers: Move SMP function call to thread context Greg Kroah-Hartman
2013-07-26 20:58 ` Greg Kroah-Hartman
2013-07-26 20:58 ` [ 44/45] [SCSI] zfcp: status read buffers on first adapter open with link down Greg Kroah-Hartman
2013-07-26 20:58 ` [ 45/45] ALSA: usb-audio: 6fire: return correct XRUN indication Greg Kroah-Hartman
2013-07-27 11:22 ` [ 00/45] 3.0.88-stable review linux
2013-07-27 23:30 ` Ben Hutchings
2013-07-28 1:31 ` Guenter Roeck
2013-07-28 18:39 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130726205658.689432388@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mrkiko.rs@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.