From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
To: Peter Hurley <peter@hurleysoftware.com>
Cc: Jiri Slaby <jslaby@suse.cz>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH next] n_tty: change lock ordering in n_tty_read() (v2)
Date: Thu, 1 Aug 2013 23:34:59 +0300 [thread overview]
Message-ID: <20130801203459.GE3109@swordfish> (raw)
In-Reply-To: <51FABE84.1090006@hurleysoftware.com>
On (08/01/13 16:01), Peter Hurley wrote:
> On 08/01/2013 03:46 PM, Sergey Senozhatsky wrote:
> >Acquire atomic_read_lock before termios_rwsem rw-lock in n_tty_read().
> >termios_rwsem is getting released and re-acquired, while remaining
> >readers are blocked on atomic_read_lock mutex, in case when process
> >must wait for input_available_p(), making lockdep unhappy:
>
> Thanks for the report. This is a regression in lockdep.
Thanks for the update. I was thinkg about that. There is no read/write
termios_rwsem cross-locking on read path with atomic_read_lock being involved,
but the thing that stopped me is that if lockdep has a regression then I would
probably see warnings from different places, not just tty.
Feel free to ask for any help or testing (if need).
thanks,
-ss
> >[ 463.542463] ======================================================
> >[ 463.542464] [ INFO: possible circular locking dependency detected ]
> >[ 463.542466] 3.11.0-rc3-next-20130801-dbg-dirty #5 Not tainted
> >[ 463.542467] -------------------------------------------------------
> >[ 463.542469] agetty/2075 is trying to acquire lock:
> >[ 463.542484] (&tty->termios_rwsem){++++..}, at: [<ffffffff81398660>] n_tty_read+0x460/0xab0
> >[ 463.542484]
> >but task is already holding lock:
> >[ 463.542496] (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff81398959>] n_tty_read+0x759/0xab0
> >[ 463.542497]
> >which lock already depends on the new lock.
> >
> >[ 463.542497]
> >the existing dependency chain (in reverse order) is:
> >[ 463.542502]
> >-> #1 (&ldata->atomic_read_lock){+.+...}:
> >[ 463.542508] [<ffffffff810b9394>] lock_acquire+0xa4/0x200
> >[ 463.542514] [<ffffffff8160a787>] mutex_lock_interruptible_nested+0x77/0x4e0
> >[ 463.542518] [<ffffffff81398959>] n_tty_read+0x759/0xab0
> >[ 463.542524] [<ffffffff81393e8d>] tty_read+0x8d/0x100
> >[ 463.542528] [<ffffffff8117987a>] vfs_read+0x9a/0x170
> >[ 463.542531] [<ffffffff8117a05c>] SyS_read+0x4c/0xa0
> >[ 463.542536] [<ffffffff81610c7e>] tracesys+0xd0/0xd5
> >[ 463.542540]
> >-> #0 (&tty->termios_rwsem){++++..}:
> >[ 463.542543] [<ffffffff810b84e6>] __lock_acquire+0x1756/0x1d20
> >[ 463.542547] [<ffffffff810b9394>] lock_acquire+0xa4/0x200
> >[ 463.542550] [<ffffffff8160c1b7>] down_read+0x47/0x60
> >[ 463.542554] [<ffffffff81398660>] n_tty_read+0x460/0xab0
> >[ 463.542557] [<ffffffff81393e8d>] tty_read+0x8d/0x100
> >[ 463.542560] [<ffffffff8117987a>] vfs_read+0x9a/0x170
> >[ 463.542563] [<ffffffff8117a05c>] SyS_read+0x4c/0xa0
> >[ 463.542566] [<ffffffff81610c7e>] tracesys+0xd0/0xd5
> >[ 463.542567]
> >other info that might help us debug this:
> >
> >[ 463.542569] Possible unsafe locking scenario:
> >
> >[ 463.542570] CPU0 CPU1
> >[ 463.542570] ---- ----
> >[ 463.542573] lock(&ldata->atomic_read_lock);
> >[ 463.542575] lock(&tty->termios_rwsem);
> >[ 463.542577] lock(&ldata->atomic_read_lock);
> >[ 463.542579] lock(&tty->termios_rwsem);
> >[ 463.542580]
> > *** DEADLOCK ***
>
> False positive.
>
> This deadlock is not possible because CPU1 only holds a read lock
> which cannot prevent CPU0 from obtaining a read lock on the same
> read/write semaphore.
>
> I'll be only too happy to track down where the regression was
> introduced as soon as I fix an actual lock order problem in
> the nouveau driver which disables lockdep :)
>
> Regards,
> Peter Hurley
>
> >[ 463.542582] 2 locks held by agetty/2075:
> >[ 463.542590] #0: (&tty->ldisc_sem){++++++}, at: [<ffffffff8139c130>] tty_ldisc_ref_wait+0x20/0x50
> >[ 463.542597] #1: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff81398959>] n_tty_read+0x759/0xab0
> >[ 463.542598]
> >stack backtrace:
> >[ 463.542602] CPU: 0 PID: 2075 Comm: agetty Not tainted 3.11.0-rc3-next-20130801-dbg-dirty #5
> >[ 463.542603] Hardware name: Acer Aspire 5741G /Aspire 5741G , BIOS V1.20 02/08/2011
> >[ 463.542609] ffffffff82236010 ffff88009af67c28 ffffffff8160630a ffffffff82236010
> >[ 463.542613] ffff88009af67c68 ffffffff816031b7 ffff880151ac0000 ffff880151ac0790
> >[ 463.542617] 000000073469e1bd ffff880151ac0768 ffff880151ac0790 ffff880151ac0000
> >[ 463.542618] Call Trace:
> >[ 463.542625] [<ffffffff8160630a>] dump_stack+0x4e/0x82
> >[ 463.542630] [<ffffffff816031b7>] print_circular_bug+0x2b6/0x2c5
> >[ 463.542634] [<ffffffff810b84e6>] __lock_acquire+0x1756/0x1d20
> >[ 463.542638] [<ffffffff810b9394>] lock_acquire+0xa4/0x200
> >[ 463.542642] [<ffffffff81398660>] ? n_tty_read+0x460/0xab0
> >[ 463.542645] [<ffffffff8160c1b7>] down_read+0x47/0x60
> >[ 463.542649] [<ffffffff81398660>] ? n_tty_read+0x460/0xab0
> >[ 463.542653] [<ffffffff81398660>] n_tty_read+0x460/0xab0
> >[ 463.542661] [<ffffffff81085020>] ? wake_up_process+0x40/0x40
> >[ 463.542665] [<ffffffff81393e8d>] tty_read+0x8d/0x100
> >[ 463.542668] [<ffffffff8117987a>] vfs_read+0x9a/0x170
> >[ 463.542671] [<ffffffff8117a05c>] SyS_read+0x4c/0xa0
> >[ 463.542674] [<ffffffff81610c7e>] tracesys+0xd0/0xd5
> >
> >v2: correct subject typo.
> >
> >Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
> >
> >---
> >
> > drivers/tty/n_tty.c | 15 ++++++---------
> > 1 file changed, 6 insertions(+), 9 deletions(-)
> >
> >diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
> >index dd8ae0c..03bd6e8 100644
> >--- a/drivers/tty/n_tty.c
> >+++ b/drivers/tty/n_tty.c
> >@@ -2122,8 +2122,6 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
> > if (c < 0)
> > return c;
> >
> >- down_read(&tty->termios_rwsem);
> >-
> > minimum = time = 0;
> > timeout = MAX_SCHEDULE_TIMEOUT;
> > if (!ldata->icanon) {
> >@@ -2145,16 +2143,15 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
> > * Internal serialization of reads.
> > */
> > if (file->f_flags & O_NONBLOCK) {
> >- if (!mutex_trylock(&ldata->atomic_read_lock)) {
> >- up_read(&tty->termios_rwsem);
> >+ if (!mutex_trylock(&ldata->atomic_read_lock))
> > return -EAGAIN;
> >- }
> > } else {
> >- if (mutex_lock_interruptible(&ldata->atomic_read_lock)) {
> >- up_read(&tty->termios_rwsem);
> >+ if (mutex_lock_interruptible(&ldata->atomic_read_lock))
> > return -ERESTARTSYS;
> >- }
> > }
> >+
> >+ down_read(&tty->termios_rwsem);
> >+
> > packet = tty->packet;
> >
> > add_wait_queue(&tty->read_wait, &wait);
> >@@ -2248,7 +2245,6 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
> > if (time)
> > timeout = time;
> > }
> >- mutex_unlock(&ldata->atomic_read_lock);
> > remove_wait_queue(&tty->read_wait, &wait);
> >
> > if (!waitqueue_active(&tty->read_wait))
> >@@ -2260,6 +2256,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
> >
> > n_tty_set_room(tty);
> > up_read(&tty->termios_rwsem);
> >+ mutex_unlock(&ldata->atomic_read_lock);
> > return retval;
> > }
> >
> >
>
prev parent reply other threads:[~2013-08-01 20:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-01 19:31 [PATCH next] n_tty: change lock oreding in n_tty_read() Sergey Senozhatsky
2013-08-01 19:35 ` Sergey Senozhatsky
2013-08-01 19:46 ` [PATCH next] n_tty: change lock ordering in n_tty_read() (v2) Sergey Senozhatsky
2013-08-01 20:01 ` Peter Hurley
2013-08-01 20:34 ` Sergey Senozhatsky [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130801203459.GE3109@swordfish \
--to=sergey.senozhatsky@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=peter@hurleysoftware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.