From: Jeff Cody <jcody@redhat.com>
To: Fam Zheng <famz@redhat.com>
Cc: kwolf@redhat.com, pmatouse@redhat.com, qemu-devel@nongnu.org,
armbru@redhat.com, stefanha@redhat.com, asias@redhat.com,
areis@redhat.com
Subject: Re: [Qemu-devel] [PATCH v3 10/10] vmdk: rename num_gtes_per_gte to num_gtes_per_gt
Date: Mon, 5 Aug 2013 23:54:55 -0400 [thread overview]
Message-ID: <20130806035455.GC12136@localhost.localdomain> (raw)
In-Reply-To: <1375753243-19530-11-git-send-email-famz@redhat.com>
On Tue, Aug 06, 2013 at 09:40:43AM +0800, Fam Zheng wrote:
> num_gtes_per_gte is a historical typo, rename it to a more sensible
> name. It means "number of GrainTableEntries per GrainTable".
Could you put this as a comment as well above/next to the declaration
of num_gtes_per_gt? It is hard not to see 'gtes' and read 'gates',
but a comment would clear that up.
>
> Signed-off-by: Fam Zheng <famz@redhat.com>
> ---
> block/vmdk.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/block/vmdk.c b/block/vmdk.c
> index 21610e3..cb34b9f 100644
> --- a/block/vmdk.c
> +++ b/block/vmdk.c
> @@ -71,7 +71,7 @@ typedef struct {
> uint64_t granularity;
> uint64_t desc_offset;
> uint64_t desc_size;
> - uint32_t num_gtes_per_gte;
> + uint32_t num_gtes_per_gt;
> uint64_t rgd_offset;
> uint64_t gd_offset;
> uint64_t grain_offset;
> @@ -585,12 +585,12 @@ static int vmdk_open_vmdk4(BlockDriverState *bs,
> return -ENOTSUP;
> }
>
> - if (le32_to_cpu(header.num_gtes_per_gte) > 512) {
> + if (le32_to_cpu(header.num_gtes_per_gt) > 512) {
> error_report("L2 table size too big");
> return -EINVAL;
> }
>
> - l1_entry_sectors = le32_to_cpu(header.num_gtes_per_gte)
> + l1_entry_sectors = le32_to_cpu(header.num_gtes_per_gt)
> * le64_to_cpu(header.granularity);
> if (l1_entry_sectors == 0) {
> return -EINVAL;
> @@ -613,7 +613,7 @@ static int vmdk_open_vmdk4(BlockDriverState *bs,
> le64_to_cpu(header.gd_offset) << 9,
> l1_backup_offset,
> l1_size,
> - le32_to_cpu(header.num_gtes_per_gte),
> + le32_to_cpu(header.num_gtes_per_gt),
> le64_to_cpu(header.granularity),
> &extent);
> if (ret < 0) {
> @@ -1409,12 +1409,12 @@ static int vmdk_create_extent(const char *filename, int64_t filesize,
> header.compressAlgorithm = compress ? VMDK4_COMPRESSION_DEFLATE : 0;
> header.capacity = filesize / 512;
> header.granularity = 128;
> - header.num_gtes_per_gte = 512;
> + header.num_gtes_per_gt = 512;
>
> grains = (filesize / 512 + header.granularity - 1) / header.granularity;
> - gt_size = ((header.num_gtes_per_gte * sizeof(uint32_t)) + 511) >> 9;
> + gt_size = ((header.num_gtes_per_gt * sizeof(uint32_t)) + 511) >> 9;
> gt_count =
> - (grains + header.num_gtes_per_gte - 1) / header.num_gtes_per_gte;
> + (grains + header.num_gtes_per_gt - 1) / header.num_gtes_per_gt;
> gd_size = (gt_count * sizeof(uint32_t) + 511) >> 9;
>
> header.desc_offset = 1;
> @@ -1430,7 +1430,7 @@ static int vmdk_create_extent(const char *filename, int64_t filesize,
> header.flags = cpu_to_le32(header.flags);
> header.capacity = cpu_to_le64(header.capacity);
> header.granularity = cpu_to_le64(header.granularity);
> - header.num_gtes_per_gte = cpu_to_le32(header.num_gtes_per_gte);
> + header.num_gtes_per_gt = cpu_to_le32(header.num_gtes_per_gt);
> header.desc_offset = cpu_to_le64(header.desc_offset);
> header.desc_size = cpu_to_le64(header.desc_size);
> header.rgd_offset = cpu_to_le64(header.rgd_offset);
> --
> 1.8.3.4
>
next prev parent reply other threads:[~2013-08-06 3:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-06 1:40 [Qemu-devel] [PATCH v3 00/10] vmdk: Input validation fixes Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 01/10] vmdk: Make VMDK3Header QEMU_PACKED Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 02/10] vmdk: Make VmdkGrainMarker QEMU_PACKED Fam Zheng
2013-08-06 3:24 ` Jeff Cody
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 03/10] vmdk: use unsigned values for on disk header fields Fam Zheng
2013-08-06 3:30 ` Jeff Cody
2013-08-06 3:42 ` Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 04/10] qemu-iotests: add poke_file utility function Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 05/10] qemu-iotests: add empty test case for vmdk Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 06/10] vmdk: check granularity field in opening Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 07/10] vmdk: check l2 table size when opening Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 08/10] vmdk: check l1 size before opening image Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 09/10] vmdk: use heap allocation for whole_grain Fam Zheng
2013-08-06 3:52 ` Jeff Cody
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 10/10] vmdk: rename num_gtes_per_gte to num_gtes_per_gt Fam Zheng
2013-08-06 3:54 ` Jeff Cody [this message]
2013-08-06 7:53 ` [Qemu-devel] [PATCH v3 00/10] vmdk: Input validation fixes Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130806035455.GC12136@localhost.localdomain \
--to=jcody@redhat.com \
--cc=areis@redhat.com \
--cc=armbru@redhat.com \
--cc=asias@redhat.com \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=pmatouse@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.