From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Michael Neuling <mikey@neuling.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [ 06/60] powerpc: Rework setting up H/FSCR bit definitions
Date: Mon, 12 Aug 2013 23:33:33 -0700 [thread overview]
Message-ID: <20130813063332.659677725@linuxfoundation.org> (raw)
In-Reply-To: <20130813063331.950321483@linuxfoundation.org>
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Neuling <mikey@neuling.org>
commit 74e400cee6c0266ba2d940ed78d981f1e24a8167 upstream.
This reworks the Facility Status and Control Regsiter (FSCR) config bit
definitions so that we can access the bit numbers. This is needed for a
subsequent patch to fix the userspace DSCR handling.
HFSCR and FSCR bit definitions are the same, so reuse them.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/reg.h | 31 ++++++++++++++++++++-----------
1 file changed, 20 insertions(+), 11 deletions(-)
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -254,19 +254,28 @@
#define SPRN_HRMOR 0x139 /* Real mode offset register */
#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */
#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
+/* HFSCR and FSCR bit numbers are the same */
+#define FSCR_TAR_LG 8 /* Enable Target Address Register */
+#define FSCR_EBB_LG 7 /* Enable Event Based Branching */
+#define FSCR_TM_LG 5 /* Enable Transactional Memory */
+#define FSCR_PM_LG 4 /* Enable prob/priv access to PMU SPRs */
+#define FSCR_BHRB_LG 3 /* Enable Branch History Rolling Buffer*/
+#define FSCR_DSCR_LG 2 /* Enable Data Stream Control Register */
+#define FSCR_VECVSX_LG 1 /* Enable VMX/VSX */
+#define FSCR_FP_LG 0 /* Enable Floating Point */
#define SPRN_FSCR 0x099 /* Facility Status & Control Register */
-#define FSCR_TAR (1 << (63-55)) /* Enable Target Address Register */
-#define FSCR_EBB (1 << (63-56)) /* Enable Event Based Branching */
-#define FSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */
+#define FSCR_TAR __MASK(FSCR_TAR_LG)
+#define FSCR_EBB __MASK(FSCR_EBB_LG)
+#define FSCR_DSCR __MASK(FSCR_DSCR_LG)
#define SPRN_HFSCR 0xbe /* HV=1 Facility Status & Control Register */
-#define HFSCR_TAR (1 << (63-55)) /* Enable Target Address Register */
-#define HFSCR_EBB (1 << (63-56)) /* Enable Event Based Branching */
-#define HFSCR_TM (1 << (63-58)) /* Enable Transactional Memory */
-#define HFSCR_PM (1 << (63-60)) /* Enable prob/priv access to PMU SPRs */
-#define HFSCR_BHRB (1 << (63-59)) /* Enable Branch History Rolling Buffer*/
-#define HFSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */
-#define HFSCR_VECVSX (1 << (63-62)) /* Enable VMX/VSX */
-#define HFSCR_FP (1 << (63-63)) /* Enable Floating Point */
+#define HFSCR_TAR __MASK(FSCR_TAR_LG)
+#define HFSCR_EBB __MASK(FSCR_EBB_LG)
+#define HFSCR_TM __MASK(FSCR_TM_LG)
+#define HFSCR_PM __MASK(FSCR_PM_LG)
+#define HFSCR_BHRB __MASK(FSCR_BHRB_LG)
+#define HFSCR_DSCR __MASK(FSCR_DSCR_LG)
+#define HFSCR_VECVSX __MASK(FSCR_VECVSX_LG)
+#define HFSCR_FP __MASK(FSCR_FP_LG)
#define SPRN_TAR 0x32f /* Target Address Register */
#define SPRN_LPCR 0x13E /* LPAR Control Register */
#define LPCR_VPM0 (1ul << (63-0))
next prev parent reply other threads:[~2013-08-13 6:48 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-13 6:33 [ 00/60] 3.10.7-stable review Greg Kroah-Hartman
2013-08-13 6:33 ` [ 01/60] SCSI: Dont attempt to send extended INQUIRY command if skip_vpd_pages is set Greg Kroah-Hartman
2013-08-13 6:33 ` [ 02/60] SCSI: megaraid_sas: megaraid_sas driver init fails in kdump kernel Greg Kroah-Hartman
2013-08-13 6:33 ` [ 03/60] virtio-scsi: Fix virtqueue affinity setup Greg Kroah-Hartman
2013-08-13 6:33 ` [ 04/60] powerpc: On POWERNV enable PPC_DENORMALISATION by default Greg Kroah-Hartman
2013-08-13 6:33 ` [ 05/60] powerpc: Fix hypervisor facility unavaliable vector number Greg Kroah-Hartman
2013-08-13 6:33 ` Greg Kroah-Hartman [this message]
2013-08-13 6:33 ` [ 07/60] powerpc: Fix context switch DSCR on POWER8 Greg Kroah-Hartman
2013-08-13 6:33 ` [ 08/60] powerpc: Save the TAR register earlier Greg Kroah-Hartman
2013-08-13 6:33 ` [ 09/60] powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs Greg Kroah-Hartman
2013-08-13 6:33 ` [ 10/60] ext4: destroy ext4_es_cachep on module unload Greg Kroah-Hartman
2013-08-13 6:33 ` [ 11/60] ext4: make sure group number is bumped after a inode allocation race Greg Kroah-Hartman
2013-08-13 6:33 ` [ 12/60] ext4: fix retry handling in ext4_ext_truncate() Greg Kroah-Hartman
2013-08-13 6:33 ` [ 13/60] regmap: cache: Make sure to sync the last register in a block Greg Kroah-Hartman
2013-08-13 6:33 ` [ 14/60] regmap: Add missing header for !CONFIG_REGMAP stubs Greg Kroah-Hartman
2013-08-13 6:33 ` [ 15/60] hwmon: (adt7470) Fix incorrect return code check Greg Kroah-Hartman
2013-08-13 6:33 ` [ 16/60] staging: zcache: fix "zcache=" kernel parameter Greg Kroah-Hartman
2013-08-13 6:33 ` [ 17/60] media: em28xx: fix assignment of the eeprom data Greg Kroah-Hartman
2013-08-13 6:33 ` [ 18/60] i2c: i2c-mxs: Use DMA mode even for small transfers Greg Kroah-Hartman
2013-08-13 6:33 ` [ 19/60] cpufreq: loongson2: fix regression related to clock management Greg Kroah-Hartman
2013-08-13 6:33 ` [ 20/60] cpufreq: rename ignore_nice as ignore_nice_load Greg Kroah-Hartman
2013-08-13 6:33 ` [ 21/60] ACPI / PM: Walk physical_node_list under physical_node_lock Greg Kroah-Hartman
2013-08-13 6:33 ` [ 22/60] tracing: Fix fields of struct trace_iterator that are zeroed by mistake Greg Kroah-Hartman
2013-08-13 6:33 ` [ 23/60] tracing: Make TRACE_ITER_STOP_ON_FREE stop the correct buffer Greg Kroah-Hartman
2013-08-13 6:33 ` [ 24/60] tracing: Use flag buffer_disabled for irqsoff tracer Greg Kroah-Hartman
2013-08-13 6:33 ` [ 25/60] tracing: Fix reset of time stamps during trace_clock changes Greg Kroah-Hartman
2013-08-13 6:33 ` [ 26/60] ALSA: usb-audio: do not trust too-big wMaxPacketSize values Greg Kroah-Hartman
2013-08-13 6:33 ` [ 27/60] ALSA: 6fire: fix DMA issues with URB transfer_buffer usage Greg Kroah-Hartman
2013-08-13 6:33 ` [ 28/60] Btrfs: release both paths before logging dir/changed extents Greg Kroah-Hartman
2013-08-13 6:33 ` [ 29/60] LOCKD: Dont call utsname()->nodename from nlmclnt_setlockargs Greg Kroah-Hartman
2013-08-13 6:33 ` [ 30/60] SUNRPC: Dont auto-disconnect from the local rpcbind socket Greg Kroah-Hartman
2013-08-13 6:33 ` [ 31/60] SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister Greg Kroah-Hartman
2013-08-13 6:33 ` [ 32/60] virtio/console: Quit from splice_write if pipe->nrbufs is 0 Greg Kroah-Hartman
2013-08-13 6:34 ` [ 33/60] virtio/console: Add pipe_lock/unlock for splice_write Greg Kroah-Hartman
2013-08-13 6:34 ` [ 34/60] virtio: console: fix race with port unplug and open/close Greg Kroah-Hartman
2013-08-13 6:34 ` [ 35/60] virtio: console: fix race in port_fops_open() and port unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 36/60] virtio: console: clean up port data immediately at time of unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 37/60] virtio: console: fix raising SIGIO after port unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 38/60] virtio: console: return -ENODEV on all read operations after unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 39/60] drm/cirrus: Invalidate page tables when pinning a BO Greg Kroah-Hartman
2013-08-13 6:34 ` [ 40/60] drm/mgag200: " Greg Kroah-Hartman
2013-08-13 6:34 ` [ 41/60] drm/ast: invalidate " Greg Kroah-Hartman
2013-08-13 6:34 ` [ 42/60] drm: Dont pass negative delta to ktime_sub_ns() Greg Kroah-Hartman
2013-08-13 6:34 ` [ 43/60] drm/radeon: select audio dto based on encoder id for DCE3 Greg Kroah-Hartman
2013-08-13 6:34 ` [ 44/60] drm/radeon: stop sending invalid UVD destroy msg Greg Kroah-Hartman
2013-08-13 6:34 ` [ 45/60] ext4: allow the mount options nodelalloc and data=journal Greg Kroah-Hartman
2013-08-13 6:34 ` [ 46/60] ext4: fix mount/remount error messages for incompatible mount options Greg Kroah-Hartman
2013-08-13 6:34 ` [ 47/60] ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT Greg Kroah-Hartman
2013-08-13 6:34 ` [ 48/60] cifs: extend the buffer length enought for sprintf() using Greg Kroah-Hartman
2013-08-13 6:34 ` [ 49/60] cifs: dont instantiate new dentries in readdir for inodes that need to be revalidated immediately Greg Kroah-Hartman
2013-08-13 6:34 ` [ 50/60] zram: allow request end to coincide with disksize Greg Kroah-Hartman
2013-08-13 6:34 ` [ 51/60] usb: core: dont try to reset_device() a port that got just disconnected Greg Kroah-Hartman
2013-08-13 6:34 ` [ 52/60] debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs) Greg Kroah-Hartman
2013-08-13 6:34 ` [ 53/60] reiserfs: fix deadlock in umount Greg Kroah-Hartman
2013-08-13 6:34 ` [ 54/60] drm/i915: initialize gt_lock early with other spin locks Greg Kroah-Hartman
2013-08-13 6:34 ` [ 55/60] drm/radeon: fix halting UVD Greg Kroah-Hartman
2013-08-13 6:34 ` [ 56/60] drm/radeon: only save UVD bo when we have open handles Greg Kroah-Hartman
2013-08-13 6:34 ` [ 57/60] drm/radeon: always program the MC on startup Greg Kroah-Hartman
2013-08-13 6:34 ` [ 58/60] SCSI: nsp32: use mdelay instead of large udelay constants Greg Kroah-Hartman
2013-08-13 6:34 ` [ 59/60] mtd: omap2: allow bulding as a module Greg Kroah-Hartman
2013-08-13 6:34 ` [ 60/60] MIPS: Expose missing pci_io{map,unmap} declarations Greg Kroah-Hartman
2013-08-13 11:57 ` [ 00/60] 3.10.7-stable review Guenter Roeck
2013-08-13 17:57 ` Greg Kroah-Hartman
2013-08-13 17:18 ` Shuah Khan
2013-08-13 17:57 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130813063332.659677725@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikey@neuling.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.