diff for duplicates of <20130813203001.GC28819@lukather>

diff --git a/N1/1.1.hdr b/N1/1.1.hdr
new file mode 100644
index 0000000..368ea2d
--- /dev/null
+++ b/N1/1.1.hdr
@@ -0,0 +1,3 @@
+Content-Type: text/plain; charset=iso-8859-1
+Content-Disposition: inline
+Content-Transfer-Encoding: quoted-printable
diff --git a/a/1.txt b/N1/1.1.txt
similarity index 83%
rename from a/1.txt
rename to N1/1.1.txt
index 91982fc..959f530 100644
--- a/a/1.txt
+++ b/N1/1.1.txt
@@ -1,12 +1,12 @@
 Hi Emilio,
 
-On Tue, Aug 13, 2013 at 04:07:45PM -0300, Emilio L?pez wrote:
+On Tue, Aug 13, 2013 at 04:07:45PM -0300, Emilio López wrote:
 > This adds a device tree usable on Mele A1000 (and A2000, as it
 > apparently is the same device except for the case). This device features
 > one UART port, Ethernet, an AXP209 PMU on i2c0 and two user configurable
 > LEDs.
 > 
-> Signed-off-by: Emilio L?pez <emilio@elopez.com.ar>
+> Signed-off-by: Emilio López <emilio@elopez.com.ar>
 > ---
 > 
 > This has been tested by arokux on #linux-sunxi in Freenode and found to 
@@ -36,9 +36,9 @@ On Tue, Aug 13, 2013 at 04:07:45PM -0300, Emilio L?pez wrote:
 > +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
 > @@ -0,0 +1,106 @@
 > +/*
-> + * Copyright 2013 Emilio L?pez
+> + * Copyright 2013 Emilio López
 > + *
-> + * Emilio L?pez <emilio@elopez.com.ar>
+> + * Emilio López <emilio@elopez.com.ar>
 > + *
 > + * The code contained herein is licensed under the GNU General Public
 > + * License. You may obtain a copy of the GNU General Public License
@@ -67,28 +67,28 @@ That's not quite useful anymore now that we have a DT-aware bootloader,
 I'd remove it.
 
 > +
-> +	soc at 01c20000 {
-> +		emac: ethernet at 01c0b000 {
+> +	soc@01c20000 {
+> +		emac: ethernet@01c0b000 {
 > +			pinctrl-names = "default";
 > +			pinctrl-0 = <&emac_pins_a>;
 > +			phy = <&phy1>;
 > +			status = "okay";
 > +		};
 > +
-> +		mdio at 01c0b080 {
+> +		mdio@01c0b080 {
 > +			phy-supply = <&reg_emac_3v3>;
 > +			status = "okay";
 > +
-> +			phy1: ethernet-phy at 1 {
+> +			phy1: ethernet-phy@1 {
 > +				reg = <1>;
 > +			};
 > +		};
 > +
-> +		pinctrl at 01c20800 {
+> +		pinctrl@01c20800 {
 > +			pinctrl-names = "default";
 > +			pinctrl-0 = <&a1000_hogs>;
 > +
-> +			a1000_hogs: hogs at 0 {
+> +			a1000_hogs: hogs@0 {
 > +				allwinner,pins = "PH15";
 > +				allwinner,function = "gpio_out";
 > +				allwinner,drive = <0>;
@@ -99,7 +99,7 @@ Why using the hog pins here? I don't think you require it anymore, just
 grab the pinctrl node from the regulator, it should work, right?
 
 > +
-> +			led_pins_a1000: led_pins at 0 {
+> +			led_pins_a1000: led_pins@0 {
 > +				allwinner,pins = "PH10", "PH20";
 > +				allwinner,function = "gpio_out";
 > +				allwinner,drive = <1>;
@@ -110,13 +110,13 @@ Do you really need the extra 10 mA here?
 > +			};
 > +		};
 > +
-> +		uart0: serial at 01c28000 {
+> +		uart0: serial@01c28000 {
 > +			pinctrl-names = "default";
 > +			pinctrl-0 = <&uart0_pins_a>;
 > +			status = "okay";
 > +		};
 > +
-> +		i2c0: i2c at 01c2ac00 {
+> +		i2c0: i2c@01c2ac00 {
 > +			pinctrl-names = "default";
 > +			pinctrl-0 = <&i2c0_pins_a>;
 > +			status = "okay";
@@ -163,10 +163,3 @@ Maxime
 Maxime Ripard, Free Electrons
 Embedded Linux, Kernel and Android engineering
 http://free-electrons.com
--------------- next part --------------
-A non-text attachment was scrubbed...
-Name: signature.asc
-Type: application/pgp-signature
-Size: 836 bytes
-Desc: Digital signature
-URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130813/eb6377c4/attachment.sig>
diff --git a/N1/1.2.bin b/N1/1.2.bin
new file mode 100644
index 0000000..9ffb713
--- /dev/null
+++ b/N1/1.2.bin
@@ -0,0 +1,17 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.12 (GNU/Linux)
+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+=yOUI
+-----END PGP SIGNATURE-----
diff --git a/N1/1.2.hdr b/N1/1.2.hdr
new file mode 100644
index 0000000..3237378
--- /dev/null
+++ b/N1/1.2.hdr
@@ -0,0 +1,2 @@
+Content-Type: application/pgp-signature; name="signature.asc"
+Content-Description: Digital signature
diff --git a/N1/2.hdr b/N1/2.hdr
new file mode 100644
index 0000000..4b86001
--- /dev/null
+++ b/N1/2.hdr
@@ -0,0 +1,4 @@
+Content-Type: text/plain; charset="us-ascii"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Content-Disposition: inline
diff --git a/N1/2.txt b/N1/2.txt
new file mode 100644
index 0000000..8133cf0
--- /dev/null
+++ b/N1/2.txt
@@ -0,0 +1,4 @@
+_______________________________________________
+linux-arm-kernel mailing list
+linux-arm-kernel@lists.infradead.org
+http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/a/content_digest b/N1/content_digest
index 3fd09ae..72b7837 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -1,19 +1,22 @@
  "ref\01376420865-4650-1-git-send-email-emilio@elopez.com.ar\0"
- "From\0maxime.ripard@free-electrons.com (Maxime Ripard)\0"
- "Subject\0[PATCH] ARM: sunxi: dt: Add device tree for Mele A1000\0"
+ "From\0Maxime Ripard <maxime.ripard@free-electrons.com>\0"
+ "Subject\0Re: [PATCH] ARM: sunxi: dt: Add device tree for Mele A1000\0"
  "Date\0Tue, 13 Aug 2013 22:30:01 +0200\0"
- "To\0linux-arm-kernel@lists.infradead.org\0"
- "\00:1\0"
+ "To\0Emilio L\303\263pez <emilio@elopez.com.ar>\0"
+ "Cc\0devicetree-discuss@lists.ozlabs.org"
+  linux-arm-kernel@lists.infradead.org
+ " arokux@gmail.com\0"
+ "\02:1.1\0"
  "b\0"
  "Hi Emilio,\n"
  "\n"
- "On Tue, Aug 13, 2013 at 04:07:45PM -0300, Emilio L?pez wrote:\n"
+ "On Tue, Aug 13, 2013 at 04:07:45PM -0300, Emilio L\303\263pez wrote:\n"
  "> This adds a device tree usable on Mele A1000 (and A2000, as it\n"
  "> apparently is the same device except for the case). This device features\n"
  "> one UART port, Ethernet, an AXP209 PMU on i2c0 and two user configurable\n"
  "> LEDs.\n"
  "> \n"
- "> Signed-off-by: Emilio L?pez <emilio@elopez.com.ar>\n"
+ "> Signed-off-by: Emilio L\303\263pez <emilio@elopez.com.ar>\n"
  "> ---\n"
  "> \n"
  "> This has been tested by arokux on #linux-sunxi in Freenode and found to \n"
@@ -43,9 +46,9 @@
  "> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts\n"
  "> @@ -0,0 +1,106 @@\n"
  "> +/*\n"
- "> + * Copyright 2013 Emilio L?pez\n"
+ "> + * Copyright 2013 Emilio L\303\263pez\n"
  "> + *\n"
- "> + * Emilio L?pez <emilio@elopez.com.ar>\n"
+ "> + * Emilio L\303\263pez <emilio@elopez.com.ar>\n"
  "> + *\n"
  "> + * The code contained herein is licensed under the GNU General Public\n"
  "> + * License. You may obtain a copy of the GNU General Public License\n"
@@ -74,28 +77,28 @@
  "I'd remove it.\n"
  "\n"
  "> +\n"
- "> +\tsoc at 01c20000 {\n"
- "> +\t\temac: ethernet at 01c0b000 {\n"
+ "> +\tsoc@01c20000 {\n"
+ "> +\t\temac: ethernet@01c0b000 {\n"
  "> +\t\t\tpinctrl-names = \"default\";\n"
  "> +\t\t\tpinctrl-0 = <&emac_pins_a>;\n"
  "> +\t\t\tphy = <&phy1>;\n"
  "> +\t\t\tstatus = \"okay\";\n"
  "> +\t\t};\n"
  "> +\n"
- "> +\t\tmdio at 01c0b080 {\n"
+ "> +\t\tmdio@01c0b080 {\n"
  "> +\t\t\tphy-supply = <&reg_emac_3v3>;\n"
  "> +\t\t\tstatus = \"okay\";\n"
  "> +\n"
- "> +\t\t\tphy1: ethernet-phy at 1 {\n"
+ "> +\t\t\tphy1: ethernet-phy@1 {\n"
  "> +\t\t\t\treg = <1>;\n"
  "> +\t\t\t};\n"
  "> +\t\t};\n"
  "> +\n"
- "> +\t\tpinctrl at 01c20800 {\n"
+ "> +\t\tpinctrl@01c20800 {\n"
  "> +\t\t\tpinctrl-names = \"default\";\n"
  "> +\t\t\tpinctrl-0 = <&a1000_hogs>;\n"
  "> +\n"
- "> +\t\t\ta1000_hogs: hogs at 0 {\n"
+ "> +\t\t\ta1000_hogs: hogs@0 {\n"
  "> +\t\t\t\tallwinner,pins = \"PH15\";\n"
  "> +\t\t\t\tallwinner,function = \"gpio_out\";\n"
  "> +\t\t\t\tallwinner,drive = <0>;\n"
@@ -106,7 +109,7 @@
  "grab the pinctrl node from the regulator, it should work, right?\n"
  "\n"
  "> +\n"
- "> +\t\t\tled_pins_a1000: led_pins at 0 {\n"
+ "> +\t\t\tled_pins_a1000: led_pins@0 {\n"
  "> +\t\t\t\tallwinner,pins = \"PH10\", \"PH20\";\n"
  "> +\t\t\t\tallwinner,function = \"gpio_out\";\n"
  "> +\t\t\t\tallwinner,drive = <1>;\n"
@@ -117,13 +120,13 @@
  "> +\t\t\t};\n"
  "> +\t\t};\n"
  "> +\n"
- "> +\t\tuart0: serial at 01c28000 {\n"
+ "> +\t\tuart0: serial@01c28000 {\n"
  "> +\t\t\tpinctrl-names = \"default\";\n"
  "> +\t\t\tpinctrl-0 = <&uart0_pins_a>;\n"
  "> +\t\t\tstatus = \"okay\";\n"
  "> +\t\t};\n"
  "> +\n"
- "> +\t\ti2c0: i2c at 01c2ac00 {\n"
+ "> +\t\ti2c0: i2c@01c2ac00 {\n"
  "> +\t\t\tpinctrl-names = \"default\";\n"
  "> +\t\t\tpinctrl-0 = <&i2c0_pins_a>;\n"
  "> +\t\t\tstatus = \"okay\";\n"
@@ -169,13 +172,33 @@
  "-- \n"
  "Maxime Ripard, Free Electrons\n"
  "Embedded Linux, Kernel and Android engineering\n"
- "http://free-electrons.com\n"
- "-------------- next part --------------\n"
- "A non-text attachment was scrubbed...\n"
- "Name: signature.asc\n"
- "Type: application/pgp-signature\n"
- "Size: 836 bytes\n"
- "Desc: Digital signature\n"
- URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130813/eb6377c4/attachment.sig>
+ http://free-electrons.com
+ "\02:1.2\0"
+ "fn\0signature.asc\0"
+ "d\0Digital signature\0"
+ "b\0"
+ "-----BEGIN PGP SIGNATURE-----\n"
+ "Version: GnuPG v1.4.12 (GNU/Linux)\n"
+ "\n"
+ "iQIcBAEBAgAGBQJSCpdJAAoJEBx+YmzsjxAg7LsQAIpmGWMLouuarS4X16x5Z5R5\n"
+ "/GVepr+fS7GtCvpdt39L8pPB2A7Z+opsA6WhZeuC2+OzHcD6XNFltX2zuEejItmi\n"
+ "J2TYZRIhUKjuTjQtIh80vQF7olVSamsPxrSxeuYDb024zvBhuTzTLMkWjiL1eKiO\n"
+ "knBwKMwcWq8gA1qFcloJyFlh+tGlseMwMglJEl5Uka5rfl3SNYnEVvSwoDQyHtip\n"
+ "EID58bOoMBQQ6kSCAVMbSg3YnLrUsnvxKjKxge76HK9BCOzkt0n+jJ5zdJn4PKf9\n"
+ "IrqEwLq3dyj2ZZeQ0qTW8S0cg8SZsQ125ZV+La5ieMrzJpBwyXXRrsJ4qJ9ZxVaq\n"
+ "+er2g12kWsEGoY6qouwyZkIY8/pTtan6Rz9itLJgwwEcSBmEkzv3fVFm61Kv6y7z\n"
+ "g2Bm1NcNEMhl1nAptge9cGNcJ/z31pQhJsTDc55nMPCDRbpuJzawbdjyEqyr7PS1\n"
+ "Qd9a7RIDPNfOc3KD8r5d/H78f3DJnlxE87KLD4eIp4Im8bmV+KZQdUt2UhA42wIl\n"
+ "LLusCXxzDgkF+7ss0xxXGtHM9tc/DnpBxfbHk5js56dgDOC+KbSd8NKmaZLOGzJd\n"
+ "1kMdfPuuMfYCZ30I11QwOPdaGkg7RglfTSgJAyF3ezAAbWX7Tum8oatl95Pf3UwY\n"
+ "YxNHZUey+gxKCTA/D1gW\n"
+ "=yOUI\n"
+ "-----END PGP SIGNATURE-----\n"
+ "\01:2\0"
+ "b\0"
+ "_______________________________________________\n"
+ "linux-arm-kernel mailing list\n"
+ "linux-arm-kernel@lists.infradead.org\n"
+ http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
 
-c8bfd201bd87f140e9470dc742ce3fdd6cd34783e5d2060fe747a4f32471025c
+100f1b0a32f91d0ed15e6f76619e07c688c51eaf4f608132e1561e9b60903ecf
