From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Linux 3.10.7
Date: Wed, 14 Aug 2013 23:10:14 -0700 [thread overview]
Message-ID: <20130815061014.GA16711@kroah.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 9308 bytes --]
I'm announcing the release of the 3.10.7 kernel.
All users of the 3.10 kernel series must upgrade.
The updated 3.10.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-3.10.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 2
arch/mips/Kconfig | 2
arch/mips/include/asm/io.h | 5 +
arch/powerpc/Kconfig | 2
arch/powerpc/include/asm/processor.h | 4
arch/powerpc/include/asm/reg.h | 31 ++++---
arch/powerpc/include/asm/switch_to.h | 9 ++
arch/powerpc/kernel/asm-offsets.c | 3
arch/powerpc/kernel/entry_64.S | 36 ++++++--
arch/powerpc/kernel/exceptions-64s.S | 5 -
arch/powerpc/kernel/process.c | 10 ++
arch/powerpc/kernel/tm.S | 20 ++++
arch/powerpc/kernel/traps.c | 58 +++++++------
drivers/acpi/proc.c | 8 +
drivers/base/regmap/regcache.c | 3
drivers/char/virtio_console.c | 70 +++++++++++-----
drivers/cpufreq/cpufreq_conservative.c | 20 ++--
drivers/cpufreq/cpufreq_governor.c | 8 -
drivers/cpufreq/cpufreq_governor.h | 4
drivers/cpufreq/cpufreq_ondemand.c | 20 ++--
drivers/cpufreq/loongson2_cpufreq.c | 11 +-
drivers/gpu/drm/ast/ast_ttm.c | 1
drivers/gpu/drm/cirrus/cirrus_ttm.c | 1
drivers/gpu/drm/drm_irq.c | 5 -
drivers/gpu/drm/i915/i915_dma.c | 1
drivers/gpu/drm/i915/intel_pm.c | 2
drivers/gpu/drm/mgag200/mgag200_ttm.c | 1
drivers/gpu/drm/radeon/evergreen.c | 6 -
drivers/gpu/drm/radeon/ni.c | 6 -
drivers/gpu/drm/radeon/r600.c | 31 +++++--
drivers/gpu/drm/radeon/r600_hdmi.c | 12 ++
drivers/gpu/drm/radeon/radeon.h | 2
drivers/gpu/drm/radeon/radeon_asic.h | 2
drivers/gpu/drm/radeon/radeon_fence.c | 2
drivers/gpu/drm/radeon/radeon_uvd.c | 50 ++++++++---
drivers/gpu/drm/radeon/rv770.c | 7 +
drivers/gpu/drm/radeon/si.c | 9 +-
drivers/hwmon/adt7470.c | 2
drivers/i2c/busses/i2c-mxs.c | 2
drivers/media/usb/em28xx/em28xx-i2c.c | 2
drivers/mtd/nand/Kconfig | 2
drivers/scsi/megaraid/megaraid_sas_base.c | 20 +++-
drivers/scsi/nsp32.c | 2
drivers/scsi/scsi.c | 3
drivers/scsi/virtio_scsi.c | 2
drivers/staging/zcache/zcache-main.c | 6 -
drivers/staging/zram/zram_drv.c | 2
drivers/usb/core/hub.c | 5 -
fs/btrfs/tree-log.c | 5 -
fs/cifs/cifsencrypt.c | 2
fs/cifs/cifsglob.h | 1
fs/cifs/connect.c | 7 -
fs/cifs/readdir.c | 8 +
fs/cifs/sess.c | 6 -
fs/debugfs/inode.c | 69 +++++-----------
fs/ext4/extents.c | 2
fs/ext4/ialloc.c | 10 +-
fs/ext4/ioctl.c | 6 -
fs/ext4/super.c | 20 ++++
fs/lockd/clntlock.c | 13 ++-
fs/lockd/clntproc.c | 5 -
fs/reiserfs/procfs.c | 99 ++++-------------------
fs/reiserfs/super.c | 3
include/linux/ftrace_event.h | 10 +-
include/linux/regmap.h | 1
include/linux/sunrpc/sched.h | 1
kernel/trace/trace.c | 128 +++++++++++++++++++-----------
kernel/trace/trace_irqsoff.c | 4
net/sunrpc/clnt.c | 4
net/sunrpc/netns.h | 1
net/sunrpc/rpcb_clnt.c | 48 ++++++++---
sound/usb/6fire/comm.c | 38 +++++++-
sound/usb/6fire/comm.h | 2
sound/usb/endpoint.c | 13 +--
74 files changed, 633 insertions(+), 390 deletions(-)
Aaro Koskinen (1):
cpufreq: loongson2: fix regression related to clock management
Al Viro (1):
reiserfs: fix deadlock in umount
Alban Browaeys (1):
media: em28xx: fix assignment of the eeprom data
Alex Deucher (2):
drm/radeon: select audio dto based on encoder id for DCE3
drm/radeon: always program the MC on startup
Alexander Z Lam (2):
tracing: Make TRACE_ITER_STOP_ON_FREE stop the correct buffer
tracing: Fix reset of time stamps during trace_clock changes
Amit Shah (5):
virtio: console: fix race with port unplug and open/close
virtio: console: fix race in port_fops_open() and port unplug
virtio: console: clean up port data immediately at time of unplug
virtio: console: fix raising SIGIO after port unplug
virtio: console: return -ENODEV on all read operations after unplug
Andrew Vagin (1):
tracing: Fix fields of struct trace_iterator that are zeroed by mistake
Anton Blanchard (1):
powerpc: On POWERNV enable PPC_DENORMALISATION by default
Arnd Bergmann (2):
SCSI: nsp32: use mdelay instead of large udelay constants
mtd: omap2: allow bulding as a module
Asias He (1):
virtio-scsi: Fix virtqueue affinity setup
Chen Gang (1):
cifs: extend the buffer length enought for sprintf() using
Christian König (3):
drm/radeon: stop sending invalid UVD destroy msg
drm/radeon: fix halting UVD
drm/radeon: only save UVD bo when we have open handles
Clemens Ladisch (1):
ALSA: usb-audio: do not trust too-big wMaxPacketSize values
Curt Brune (1):
hwmon: (adt7470) Fix incorrect return code check
Dave Airlie (1):
drm/ast: invalidate page tables when pinning a BO
Egbert Eich (1):
drm/mgag200: Invalidate page tables when pinning a BO
Eric Sandeen (1):
ext4: destroy ext4_es_cachep on module unload
Fabio Estevam (1):
i2c: i2c-mxs: Use DMA mode even for small transfers
Greg Kroah-Hartman (1):
Linux 3.10.7
Jani Nikula (1):
drm/i915: initialize gt_lock early with other spin locks
Jeff Layton (1):
cifs: don't instantiate new dentries in readdir for inodes that need to be revalidated immediately
Josef Bacik (1):
Btrfs: release both paths before logging dir/changed extents
Julius Werner (1):
usb: core: don't try to reset_device() a port that got just disconnected
Jussi Kivilinna (1):
ALSA: 6fire: fix DMA issues with URB transfer_buffer usage
Lars-Peter Clausen (1):
regmap: cache: Make sure to sync the last register in a block
Markos Chandras (1):
MIPS: Expose missing pci_io{map,unmap} declarations
Martin K. Petersen (1):
SCSI: Don't attempt to send extended INQUIRY command if skip_vpd_pages is set
Mateusz Krawczuk (1):
regmap: Add missing header for !CONFIG_REGMAP stubs
Michael Neuling (5):
powerpc: Fix hypervisor facility unavaliable vector number
powerpc: Rework setting up H/FSCR bit definitions
powerpc: Fix context switch DSCR on POWER8
powerpc: Save the TAR register earlier
powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs
Michal Srb (1):
drm/cirrus: Invalidate page tables when pinning a BO
Michel Dänzer (1):
drm: Don't pass negative delta to ktime_sub_ns()
Oleg Nesterov (1):
debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs)
Piotr Sarna (2):
staging: zcache: fix "zcache=" kernel parameter
ext4: fix mount/remount error messages for incompatible mount options
Rafael J. Wysocki (1):
ACPI / PM: Walk physical_node_list under physical_node_lock
Sergey Senozhatsky (1):
zram: allow request end to coincide with disksize
Steven Rostedt (Red Hat) (1):
tracing: Use flag buffer_disabled for irqsoff tracer
Sumit.Saxena@lsi.com (1):
SCSI: megaraid_sas: megaraid_sas driver init fails in kdump kernel
Theodore Ts'o (4):
ext4: make sure group number is bumped after a inode allocation race
ext4: fix retry handling in ext4_ext_truncate()
ext4: allow the mount options nodelalloc and data=journal
ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT
Trond Myklebust (3):
LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs
SUNRPC: Don't auto-disconnect from the local rpcbind socket
SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister
Viresh Kumar (1):
cpufreq: rename ignore_nice as ignore_nice_load
Yoshihiro YUNOMAE (2):
virtio/console: Quit from splice_write if pipe->nrbufs is 0
virtio/console: Add pipe_lock/unlock for splice_write
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next reply other threads:[~2013-08-15 6:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-15 6:10 Greg KH [this message]
2013-08-15 6:10 ` Linux 3.10.7 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130815061014.GA16711@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.