Re: [PATCHv2] libgles: Added prebuilt userspace libraries for graphics acceleration

[Denys Dmytriyenko <denys@ti.com>]

On Mon, Aug 19, 2013 at 03:09:55PM +0000, Maupin, Chase wrote:
> >-----Original Message-----
> >From: meta-ti-bounces@yoctoproject.org [mailto:meta-ti-
> >bounces@yoctoproject.org] On Behalf Of Hingolikar, Mrinmayee
> >Sent: Sunday, August 18, 2013 11:55 PM
> >To: meta-ti@yoctoproject.org
> >Subject: [meta-ti] [PATCHv2] libgles: Added prebuilt userspace
> >libraries for graphics acceleration
> >
> >
> >Subject: [PATCHv2] libgles: Added prebuilt userspace libraries for
> >graphics acceleration
> >
> >* These libraries are not distributable in source and hence
> >  are available only as binary. They implement OpenGLES 1.x and
> >  OpenGLES 2.x accelerated using SGX 544-MP2 found in OMAP5
> >  class of devices.
> >
> >v2:
> >
> >Addressed Chases's comments:
> >* Updated the PR
> >* Added shasum for the tarball
> >* Removed redundant FILES section.
> >
> >Signed-off-by: Mrinmayee Hingolikar <mrinmayee@ti.com>
> >Signed-off-by: Siddharth Heroor <heroor@ti.com>
> >---
> > .../libgles/omap5-sgx-ddk-um-linux_1.9.0.10.bb     |   20
> >++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> > create mode 100644 recipes-graphics/libgles/omap5-sgx-ddk-um-
> >linux_1.9.0.10.bb
> >
> >diff --git a/recipes-graphics/libgles/omap5-sgx-ddk-um-
> >linux_1.9.0.10.bb b/recipes-graphics/libgles/omap5-sgx-ddk-um-
> >linux_1.9.0.10.bb
> >new file mode 100644
> >index 0000000..052f343
> >--- /dev/null
> >+++ b/recipes-graphics/libgles/omap5-sgx-ddk-um-linux_1.9.0.10.bb
> >@@ -0,0 +1,20 @@
> >+DESCRIPTION = "Userspace libraries for sgx"
> >+HOMEPAGE = "http://downloads.ti.com/dsps/dsps_public_sw/gfxsdk"
> >+LICENSE = "TI"
> >+
> >+SRC_URI =
> >"http://downloads.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/
> >gfxsdk/OMAP5_1_09_00_10//exports/omap5-sgx-ddk-um-linux-
> >${PV}.tar.gz;protocol=http"
> >+
> >+LIC_FILES_CHKSUM = "file://OMAP5-Linux-Graphics-DDK-UM-
> >Manifest.doc;md5=d280df8e94bb2e7b9251c8526078eeb8"
> >+
> >+PR = "r0"
> >+
> >+SRC_URI[md5sum] = "3cfb875de031098a4c1eeeaf4e442367"
> >+SRC_URI[shasum] = "773299242fc72a5837b7e17053123ad55d69723b"
> 
> This should be a sha256sum.  So your checksum is too small and you need to specify SRC_URI[sh256sum]

You can also just run a recipe once through bitbake and it will tell you there 
are no checksums and provide a handy cut and paste lines to populate them.


> >+
> >+S = "${WORKDIR}/${PN}-${PV}"
> >+
> >+do_install () {
> >+    oe_runmake install DESTDIR=${D}
> >+}
> >+
> >+FILES_${PN} += " ${libdir}/gbm/"
> >--
> >1.7.9.5
> >
> >_______________________________________________
> >meta-ti mailing list
> >meta-ti@yoctoproject.org
> >https://lists.yoctoproject.org/listinfo/meta-ti
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti