Re: ipsec smp scalability and cpu use fairness (softirqs)

[Steffen Klassert <steffen.klassert@secunet.com>]

On Tue, Aug 13, 2013 at 03:41:02PM +0300, Timo Teras wrote:
> On Tue, 13 Aug 2013 13:56:52 +0200
> Steffen Klassert <steffen.klassert@secunet.com> wrote:
> 
> > 
> > I'll do some tests with current net-next on my own tomorrow and let
> > you know about the results.
> 
> Yes, I've got pcrypt there. Apparently I had some of the cpu bindings
> not right, so now it's looking a lot better. But it seems that
> ksoftirqd on one of the CPUs becomes first bottleneck. I'll try to
> figure out why.
> 
> Thanks on all the info so far, will continue experimenting here too.

Here are the promised test results:

I used my test boxes with two nodes (Intel Xeon X5550  @ 2.67GHz) and all
cores utilized (16 logical cores). I did iperf box to box IPsec tunnel
tests with the crypto algorithm:

pcrypt(authenc(hmac(sha1-ssse3),cbc(aes-asm)))

Throughput is at 1.70 Gbits/sec.

Same test without pcrypt, i.e. crypto algorithm:

authenc(hmac(sha1-ssse3),cbc(aes-asm))

Throughput is at 560 Mbits/sec.

Unfortunately I can't do forwarding tests, I have only two 10 Gbit NICs.
Would be nice if I could get forwarding test results from somewhere.