From: Ingo Molnar <mingo@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [GIT PULL] x86/apic changes for v3.12
Date: Tue, 3 Sep 2013 16:22:17 +0200 [thread overview]
Message-ID: <20130903142217.GA27791@gmail.com> (raw)
Linus,
Please pull the latest x86-apic-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-apic-for-linus
HEAD: 25aa2957973d361081ac6c8b6e5a0d9d7a83fef6 x86/ioapic: Check attr against the previous setting when programmed more than once
Smaller fixes.
Thanks,
Ingo
------------------>
Liu Ping Fan (1):
x86/ioapic: Check attr against the previous setting when programmed more than once
Tang Chen (1):
x86/acpi: Fix incorrect sanity check in acpi_register_lapic()
Yoshihiro YUNOMAE (1):
x86/ioapic/kcrash: Prevent crash_kexec() from deadlocking on ioapic_lock
arch/x86/include/asm/apic.h | 2 ++
arch/x86/kernel/acpi/boot.c | 7 +++++--
arch/x86/kernel/apic/io_apic.c | 14 +++++++++++---
arch/x86/kernel/crash.c | 4 +++-
4 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index f8119b5..1d2091a 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -715,4 +715,6 @@ static inline void exiting_ack_irq(void)
ack_APIC_irq();
}
+extern void ioapic_zap_locks(void);
+
#endif /* _ASM_X86_APIC_H */
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 2627a81..81aa73b 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -199,7 +199,7 @@ static void acpi_register_lapic(int id, u8 enabled)
{
unsigned int ver = 0;
- if (id >= (MAX_LOCAL_APIC-1)) {
+ if (id >= MAX_LOCAL_APIC) {
printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
return;
}
@@ -1120,6 +1120,7 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
int ioapic;
int ioapic_pin;
struct io_apic_irq_attr irq_attr;
+ int ret;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
@@ -1149,7 +1150,9 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
+ ret = io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
+ if (ret < 0)
+ gsi = INT_MIN;
return gsi;
}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 9ed796c..e63a5bd 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1534,6 +1534,11 @@ void intel_ir_io_apic_print_entries(unsigned int apic,
}
}
+void ioapic_zap_locks(void)
+{
+ raw_spin_lock_init(&ioapic_lock);
+}
+
__apicdebuginit(void) print_IO_APIC(int ioapic_idx)
{
union IO_APIC_reg_00 reg_00;
@@ -3375,12 +3380,15 @@ int io_apic_setup_irq_pin_once(unsigned int irq, int node,
{
unsigned int ioapic_idx = attr->ioapic, pin = attr->ioapic_pin;
int ret;
+ struct IO_APIC_route_entry orig_entry;
/* Avoid redundant programming */
if (test_bit(pin, ioapics[ioapic_idx].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mpc_ioapic_id(ioapic_idx), pin);
- return 0;
+ pr_debug("Pin %d-%d already programmed\n", mpc_ioapic_id(ioapic_idx), pin);
+ orig_entry = ioapic_read_entry(attr->ioapic, pin);
+ if (attr->trigger == orig_entry.trigger && attr->polarity == orig_entry.polarity)
+ return 0;
+ return -EBUSY;
}
ret = io_apic_setup_irq_pin(irq, node, attr);
if (!ret)
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 74467fe..e0e0841 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -128,7 +128,9 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
cpu_emergency_svm_disable();
lapic_shutdown();
-#if defined(CONFIG_X86_IO_APIC)
+#ifdef CONFIG_X86_IO_APIC
+ /* Prevent crash_kexec() from deadlocking on ioapic_lock. */
+ ioapic_zap_locks();
disable_IO_APIC();
#endif
#ifdef CONFIG_HPET_TIMER
reply other threads:[~2013-09-03 14:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130903142217.GA27791@gmail.com \
--to=mingo@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.