From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/3] ARM: atmel: add RNDIS gadget support
Date: Tue, 10 Sep 2013 16:29:17 +0200 [thread overview]
Message-ID: <201309101629.18010.marex@denx.de> (raw)
In-Reply-To: <1378807422-1583-4-git-send-email-voice.shen@atmel.com>
Dear Bo Shen,
> Add RNDIS gadget support to test atmel usba udc driver
>
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
>
> ---
> Changes in v2:
> - Add a common header to hold atmel usba udc information for different
> SoCs
> ---
> arch/arm/cpu/armv7/at91/sama5d3_devices.c | 12 +++++
> arch/arm/include/asm/arch-at91/at91_common.h | 1 +
> arch/arm/include/asm/arch-at91/atmel_usba_udc.h | 64
> +++++++++++++++++++++++ board/atmel/sama5d3xek/sama5d3xek.c |
> 13 +++++
> include/configs/sama5d3xek.h | 8 +++
> 5 files changed, 98 insertions(+)
> create mode 100644 arch/arm/include/asm/arch-at91/atmel_usba_udc.h
>
> diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c
> b/arch/arm/cpu/armv7/at91/sama5d3_devices.c index e55e1c6..51f0a6d 100644
> --- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c
> +++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
> @@ -202,3 +202,15 @@ void at91_lcd_hw_init(void)
> at91_periph_clk_enable(ATMEL_ID_LCDC);
> }
> #endif
> +
> +#ifdef CONFIG_USB_GADGET_ATMEL_USBA
> +void at91_udp_hw_init(void)
> +{
> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> +
> + /* Enable UPLL clock */
> + writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
> + /* Enable UDPHS clock */
> + at91_periph_clk_enable(ATMEL_ID_UDPHS);
> +}
> +#endif
> diff --git a/arch/arm/include/asm/arch-at91/at91_common.h
> b/arch/arm/include/asm/arch-at91/at91_common.h index 9f54fdd..abcb97d
> 100644
> --- a/arch/arm/include/asm/arch-at91/at91_common.h
> +++ b/arch/arm/include/asm/arch-at91/at91_common.h
> @@ -19,6 +19,7 @@ void at91_serial2_hw_init(void);
> void at91_seriald_hw_init(void);
> void at91_spi0_hw_init(unsigned long cs_mask);
> void at91_spi1_hw_init(unsigned long cs_mask);
> +void at91_udp_hw_init(void);
> void at91_uhp_hw_init(void);
> void at91_lcd_hw_init(void);
>
> diff --git a/arch/arm/include/asm/arch-at91/atmel_usba_udc.h
> b/arch/arm/include/asm/arch-at91/atmel_usba_udc.h new file mode 100644
> index 0000000..6f540d2
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-at91/atmel_usba_udc.h
This new file should be added alongside the USB driver, not board stuff.
[...]
Best regards,
Marek Vasut
next prev parent reply other threads:[~2013-09-10 14:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-10 10:03 [U-Boot] [PATCH v2 0/3] USB: atmel: add atmel usba udc driver support Bo Shen
2013-09-10 10:03 ` [U-Boot] [PATCH v2 1/3] USB: gadget: add atmel usba udc driver Bo Shen
2013-09-10 14:31 ` Marek Vasut
2013-09-10 10:03 ` [U-Boot] [PATCH v2 2/3] ARM: atmel: correct UDPHS name Bo Shen
2013-09-10 14:29 ` Marek Vasut
2013-09-10 10:03 ` [U-Boot] [PATCH v2 3/3] ARM: atmel: add RNDIS gadget support Bo Shen
2013-09-10 14:29 ` Marek Vasut [this message]
2013-09-11 10:15 ` Bo Shen
2013-09-10 14:27 ` [U-Boot] [PATCH v2 0/3] USB: atmel: add atmel usba udc driver support Marek Vasut
2013-09-11 10:14 ` Bo Shen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201309101629.18010.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.