Re: [PATCH v4] KVM: nVMX: Fully support of nested VMX preemption timer

[Gleb Natapov <gleb@redhat.com>]

On Fri, Sep 06, 2013 at 10:04:51AM +0800, Arthur Chunqi Li wrote:
> This patch contains the following two changes:
> 1. Fix the bug in nested preemption timer support. If vmexit L2->L0
> with some reasons not emulated by L1, preemption timer value should
> be save in such exits.
> 2. Add support of "Save VMX-preemption timer value" VM-Exit controls
> to nVMX.
> 
> With this patch, nested VMX preemption timer features are fully
> supported.
> 
> Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
> ---
> ChangeLog to v3:
> Move nested_adjust_preemption_timer to the latest place just before vmenter.
> Some minor changes.
> 
>  arch/x86/include/uapi/asm/msr-index.h |    1 +
>  arch/x86/kvm/vmx.c                    |   49 +++++++++++++++++++++++++++++++--
>  2 files changed, 48 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/uapi/asm/msr-index.h
> index bb04650..b93e09a 100644
> --- a/arch/x86/include/uapi/asm/msr-index.h
> +++ b/arch/x86/include/uapi/asm/msr-index.h
> @@ -536,6 +536,7 @@
>  
>  /* MSR_IA32_VMX_MISC bits */
>  #define MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS (1ULL << 29)
> +#define MSR_IA32_VMX_MISC_PREEMPTION_TIMER_SCALE   0x1F
>  /* AMD-V MSRs */
>  
>  #define MSR_VM_CR                       0xc0010114
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 1f1da43..f364d16 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -374,6 +374,8 @@ struct nested_vmx {
>  	 */
>  	struct page *apic_access_page;
>  	u64 msr_ia32_feature_control;
> +	/* Set if vmexit is L2->L1 */
> +	bool nested_vmx_exit;
Do not see why it is needed, see bellow.

>  };
>  
>  #define POSTED_INTR_ON  0
> @@ -2204,7 +2206,17 @@ static __init void nested_vmx_setup_ctls_msrs(void)
>  #ifdef CONFIG_X86_64
>  		VM_EXIT_HOST_ADDR_SPACE_SIZE |
>  #endif
> -		VM_EXIT_LOAD_IA32_PAT | VM_EXIT_SAVE_IA32_PAT;
> +		VM_EXIT_LOAD_IA32_PAT | VM_EXIT_SAVE_IA32_PAT |
> +		VM_EXIT_SAVE_VMX_PREEMPTION_TIMER;
> +	if (!(nested_vmx_pinbased_ctls_high &
> +				PIN_BASED_VMX_PREEMPTION_TIMER) ||
> +			!(nested_vmx_exit_ctls_high &
> +				VM_EXIT_SAVE_VMX_PREEMPTION_TIMER)) {
> +		nested_vmx_exit_ctls_high &=
> +			(~VM_EXIT_SAVE_VMX_PREEMPTION_TIMER);
> +		nested_vmx_pinbased_ctls_high &=
> +			(~PIN_BASED_VMX_PREEMPTION_TIMER);
> +	}
>  	nested_vmx_exit_ctls_high |= (VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR |
>  				      VM_EXIT_LOAD_IA32_EFER);
>  
> @@ -6707,6 +6719,24 @@ static void vmx_get_exit_info(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2)
>  	*info2 = vmcs_read32(VM_EXIT_INTR_INFO);
>  }
>  
> +static void nested_adjust_preemption_timer(struct kvm_vcpu *vcpu)
> +{
> +	u64 delta_tsc_l1;
> +	u32 preempt_val_l1, preempt_val_l2, preempt_scale;
> +
> +	preempt_scale = native_read_msr(MSR_IA32_VMX_MISC) &
> +			MSR_IA32_VMX_MISC_PREEMPTION_TIMER_SCALE;
> +	preempt_val_l2 = vmcs_read32(VMX_PREEMPTION_TIMER_VALUE);
> +	delta_tsc_l1 = kvm_x86_ops->read_l1_tsc(vcpu,
> +			native_read_tsc()) - vcpu->arch.last_guest_tsc;
> +	preempt_val_l1 = delta_tsc_l1 >> preempt_scale;
> +	if (preempt_val_l2 <= preempt_val_l1)
> +		preempt_val_l2 = 0;
> +	else
> +		preempt_val_l2 -= preempt_val_l1;
> +	vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, preempt_val_l2);
> +}
> +
>  /*
>   * The guest has exited.  See if we can fix it or if we need userspace
>   * assistance.
> @@ -6736,9 +6766,11 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
>  		vmx->nested.nested_run_pending = 0;
>  
>  	if (is_guest_mode(vcpu) && nested_vmx_exit_handled(vcpu)) {
> +		vmx->nested.nested_vmx_exit = true;
>  		nested_vmx_vmexit(vcpu);
>  		return 1;
>  	}
> +	vmx->nested.nested_vmx_exit = false;
>  
>  	if (exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY) {
>  		vcpu->run->exit_reason = KVM_EXIT_FAIL_ENTRY;
> @@ -7132,6 +7164,8 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
>  	debugctlmsr = get_debugctlmsr();
>  
>  	vmx->__launched = vmx->loaded_vmcs->launched;
> +	if (is_guest_mode(vcpu) && !(vmx->nested.nested_vmx_exit))
How is_guest_mode() and nested_vmx_exi can be both true? The only place
nested_vmx_exit is set to true is just before call to
nested_vmx_vmexit(). The firs thing nested_vmx_vmexit() does is makes
is_guest_mode() false. To enter guest mode again at least one other
vmexit from L1 to L0 is needed at which point nested_vmx_exit will be
reset to false again.

If you want to avoid calling nested_adjust_preemption_timer() during 
vmlaunch/vmresume emulation (and it looks like this is what you are
trying to achieve here) you can check nested_run_pending.


> +		nested_adjust_preemption_timer(vcpu);
>  	asm(
>  		/* Store host registers */
>  		"push %%" _ASM_DX "; push %%" _ASM_BP ";"
> @@ -7518,6 +7552,7 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
>  {
>  	struct vcpu_vmx *vmx = to_vmx(vcpu);
>  	u32 exec_control;
> +	u32 exit_control;
>  
>  	vmcs_write16(GUEST_ES_SELECTOR, vmcs12->guest_es_selector);
>  	vmcs_write16(GUEST_CS_SELECTOR, vmcs12->guest_cs_selector);
> @@ -7691,7 +7726,10 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
>  	 * we should use its exit controls. Note that VM_EXIT_LOAD_IA32_EFER
>  	 * bits are further modified by vmx_set_efer() below.
>  	 */
> -	vmcs_write32(VM_EXIT_CONTROLS, vmcs_config.vmexit_ctrl);
> +	exit_control = vmcs_config.vmexit_ctrl;
> +	if (vmcs12->pin_based_vm_exec_control & PIN_BASED_VMX_PREEMPTION_TIMER)
> +		exit_control |= VM_EXIT_SAVE_VMX_PREEMPTION_TIMER;
> +	vmcs_write32(VM_EXIT_CONTROLS, exit_control);
>  
>  	/* vmcs12's VM_ENTRY_LOAD_IA32_EFER and VM_ENTRY_IA32E_MODE are
>  	 * emulated by vmx_set_efer(), below.
> @@ -8090,6 +8128,13 @@ static void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
>  	vmcs12->guest_pending_dbg_exceptions =
>  		vmcs_readl(GUEST_PENDING_DBG_EXCEPTIONS);
>  
> +	if ((vmcs12->pin_based_vm_exec_control &
> +				PIN_BASED_VMX_PREEMPTION_TIMER) &&
> +			(vmcs12->vm_exit_controls &
> +				VM_EXIT_SAVE_VMX_PREEMPTION_TIMER))
> +		vmcs12->vmx_preemption_timer_value =
> +			vmcs_read32(VMX_PREEMPTION_TIMER_VALUE);
> +
>  	/*
>  	 * In some cases (usually, nested EPT), L2 is allowed to change its
>  	 * own CR3 without exiting. If it has changed it, we must keep it.
> -- 
> 1.7.9.5

--
			Gleb.