Re: [PATCH 2/4] usb: musb: am335x: add second port to beagle bone

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1401 bytes --]

On Thu, Aug 15, 2013 at 05:21:50PM +0200, Sebastian Andrzej Siewior wrote:
> So I assumed that Beagle bone has only one USB port in host mode because
> the micro USB connector had an USB-UART there. I was wrong a little. The
> second port runs on host mode, but the micro USB plug is connected to an
> internal HUB with two ports: one to the USB-UART and one to musb
> instance one.
> For that reason, this patch enables both ports: the primary in device
> mode only and the second in host mode only.
> 
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

Acked-by: Felipe Balbi <balbi@ti.com>

> ---
>  arch/arm/boot/dts/am335x-bone.dts | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> index e8447a7..596d653 100644
> --- a/arch/arm/boot/dts/am335x-bone.dts
> +++ b/arch/arm/boot/dts/am335x-bone.dts
> @@ -131,9 +131,24 @@
>  				status = "okay";
>  			};
>  
> +			usb-phy@47401b00 {
> +				status = "okay";
> +			};
> +
>  			usb@47401000 {
>  				status = "okay";
>  			};
> +
> +			usb@47401800 {
> +				status = "okay";
> +				usb@47401c00 {
> +					mg,port-mode = <1>;
> +				};
> +			};
> +
> +			dma-controller@07402000  {
> +				status = "okay";
> +			};
>  		};
>  
>  		i2c0: i2c@44e0b000 {
> -- 
> 1.8.4.rc2
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]