All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Chinner <david@fromorbit.com>
To: Mark Tinguely <tinguely@sgi.com>
Cc: xfs@oss.sgi.com
Subject: Re: [PATCH] xfs: fix node forward in xfs_node_toosmall
Date: Mon, 23 Sep 2013 10:08:24 +1000	[thread overview]
Message-ID: <20130923000824.GK12541@dastard> (raw)
In-Reply-To: <20130920220519.585903357@sgi.com>

On Fri, Sep 20, 2013 at 05:05:08PM -0500, Mark Tinguely wrote:
> Commit f5ea1100 cleans up the disk to host conversions for
> node directory entries, but because a variable is reused in
> xfs_node_toosmall() the next node is not correctly found.
> If the original node is small enough (<= 3/8 of the node size),
> this change may incorrectly cause a node collapse when it should
> not. That will cause an assert in xfstest generic/319:
> 
>    Assertion failed: first <= last && last < BBTOB(bp->b_length),
>    file: /root/newest/xfs/fs/xfs/xfs_trans_buf.c, line: 569
> 
> Keep the original node header to get the correct forward node.
> 
> Signed-off-by: Mark Tinguely <tinguely@sgi.com>
> ---
>  fs/xfs/xfs_da_btree.c |    6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> Index: b/fs/xfs/xfs_da_btree.c
> ===================================================================
> --- a/fs/xfs/xfs_da_btree.c
> +++ b/fs/xfs/xfs_da_btree.c
> @@ -1163,6 +1163,7 @@ xfs_da3_node_toosmall(
>  	xfs_dablk_t		blkno;
>  	struct xfs_buf		*bp;
>  	struct xfs_da3_icnode_hdr nodehdr;
> +	struct xfs_da3_icnode_hdr firstnhdr;
>  	int			count;
>  	int			forward;
>  	int			error;
> @@ -1221,13 +1222,14 @@ xfs_da3_node_toosmall(
>  	count -= state->node_ents >> 2;
>  	count -= nodehdr.count;
>  
> +	firstnhdr = nodehdr;
>  	/* start with smaller blk num */
>  	forward = nodehdr.forw < nodehdr.back;
>  	for (i = 0; i < 2; forward = !forward, i++) {
>  		if (forward)
> -			blkno = nodehdr.forw;
> +			blkno = firstnhdr.forw;
>  		else
> -			blkno = nodehdr.back;
> +			blkno = firstnhdr.back;
>  		if (blkno == 0)
>  			continue;
>  		error = xfs_da3_node_read(state->args->trans, state->args->dp,

Yes, that definitely a bug, but I think that the change doesn't
scope correctly. The original node header doesn't need to be saved
like this - the node header decoded in the loop needs a loop-scope
variable. i.e.:

	/* start with smaller blk num */
	forward = nodehdr.forw < nodehdr.back;
	for (i = 0; i < 2; forward = !forward, i++) {
+		struct xfs_da3_icnode_hdr thdr;
+
		if (forward)
			blkno = nodehdr.forw;
		else
			blkno = nodehdr.back;
		if (blkno == 0)
			continue;
		error = xfs_da3_node_read(state->args->trans, state->args->dp,
					blkno, -1, &bp, state->args->whichfork);
		if (error)
			return(error);

		node = bp->b_addr;
-		xfs_da3_node_hdr_from_disk(&nodehdr, node);
+		xfs_da3_node_hdr_from_disk(&thdr, node);
		xfs_trans_brelse(state->args->trans, bp);

-		if (count - nodehdr.count >= 0)
+		if (count - thdr.count >= 0)
			break;  /* fits with at least 25% to spare */
	}

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  reply	other threads:[~2013-09-23  0:08 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-20 22:05 [PATCH] xfs: fix node forward in xfs_node_toosmall Mark Tinguely
2013-09-23  0:08 ` Dave Chinner [this message]
2013-09-23 13:38   ` Mark Tinguely
2013-09-23 17:18 ` [PATCH] xfs: v2 " Mark Tinguely
2013-09-23 23:48   ` Dave Chinner
2013-09-24 17:35     ` Mark Tinguely
2013-09-24 18:59       ` Ben Myers
2013-09-24 21:06       ` Dave Chinner
2013-09-24 21:34         ` Mark Tinguely
2013-09-24 23:33           ` Dave Chinner
2013-09-25 18:38             ` Ben Myers
2013-09-25 21:03               ` Eric Sandeen
2013-09-25 22:11                 ` Ben Myers
2013-09-23 21:34 ` [PATCH] xfs: " Michael L. Semon
2013-09-23 21:45   ` Mark Tinguely
  -- strict thread matches above, loose matches on Subject: below --
2013-10-09  0:09 Ben Myers
2013-10-10 23:02 ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130923000824.GK12541@dastard \
    --to=david@fromorbit.com \
    --cc=tinguely@sgi.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.