From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Alex Deucher <alexander.deucher@amd.com>
Subject: [ 36/40] drm/edid: add quirk for Medion MD30217PG
Date: Tue, 24 Sep 2013 17:12:08 -0700 [thread overview]
Message-ID: <20130925001045.857541830@linuxfoundation.org> (raw)
In-Reply-To: <20130925001041.939335518@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <alexander.deucher@amd.com>
commit 118bdbd86b39dbb843155054021d2c59058f1e05 upstream.
This LCD monitor (1280x1024 native) has a completely
bogus detailed timing (640x350@70hz). User reports that
1280x1024@60 has waves so prefer 1280x1024@75.
Manufacturer: MED Model: 7b8 Serial#: 99188
Year: 2005 Week: 5
EDID Version: 1.3
Analog Display Input, Input Voltage Level: 0.700/0.700 V
Sync: Separate
Max Image Size [cm]: horiz.: 34 vert.: 27
Gamma: 2.50
DPMS capabilities: Off; RGB/Color Display
First detailed timing is preferred mode
redX: 0.645 redY: 0.348 greenX: 0.280 greenY: 0.605
blueX: 0.142 blueY: 0.071 whiteX: 0.313 whiteY: 0.329
Supported established timings:
720x400@70Hz
640x480@60Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
Manufacturer's mask: 0
Supported standard timings:
Supported detailed timing:
clock: 25.2 MHz Image Size: 337 x 270 mm
h_active: 640 h_sync: 688 h_sync_end 784 h_blank_end 800 h_border: 0
v_active: 350 v_sync: 350 v_sync_end 352 v_blanking: 449 v_border: 0
Monitor name: MD30217PG
Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
Serial No: 501099188
EDID (in hex):
00ffffffffffff0034a4b80774830100
050f010368221b962a0c55a559479b24
125054afcf00310a0101010101018180
000000000000d60980a0205e63103060
0200510e1100001e000000fc004d4433
3032313750470a202020000000fd0038
4c1e530e000a202020202020000000ff
003530313039393138380a2020200078
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: friedrich@mailstation.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/drm_edid.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -125,6 +125,9 @@ static struct edid_quirk {
/* ViewSonic VA2026w */
{ "VSC", 5020, EDID_QUIRK_FORCE_REDUCED_BLANKING },
+
+ /* Medion MD 30217 PG */
+ { "MED", 0x7b8, EDID_QUIRK_PREFER_LARGE_75 },
};
/*** DDC fetch and block validation ***/
next prev parent reply other threads:[~2013-09-25 0:14 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-25 0:11 [ 00/40] 3.4.63-stable review Greg Kroah-Hartman
2013-09-25 0:11 ` [ 01/40] SCSI: sd: Fix potential out-of-bounds access Greg Kroah-Hartman
2013-09-25 0:11 ` [ 02/40] crypto: api - Fix race condition in larval lookup Greg Kroah-Hartman
2013-09-25 0:11 ` Greg Kroah-Hartman
2013-09-25 0:11 ` [ 03/40] powerpc: Handle unaligned ldbrx/stdbrx Greg Kroah-Hartman
2013-09-25 0:11 ` [ 04/40] xen-gnt: prevent adding duplicate gnt callbacks Greg Kroah-Hartman
2013-09-25 0:11 ` [ 05/40] ARM: PCI: versatile: Fix SMAP register offsets Greg Kroah-Hartman
2013-09-25 0:11 ` [ 06/40] xhci-plat: Dont enable legacy PCI interrupts Greg Kroah-Hartman
2013-09-25 0:11 ` [ 07/40] usb: xhci: Disable runtime PM suspend for quirky controllers Greg Kroah-Hartman
2013-09-25 0:11 ` [ 08/40] cifs: ensure that srv_mutex is held when dealing with ssocket pointer Greg Kroah-Hartman
2013-09-25 0:11 ` [ 09/40] staging: comedi: dt282x: dt282x_ai_insn_read() always fails Greg Kroah-Hartman
2013-09-25 0:11 ` [ 10/40] USB: mos7720: use GFP_ATOMIC under spinlock Greg Kroah-Hartman
2013-09-25 0:11 ` [ 11/40] USB: mos7720: fix big-endian control requests Greg Kroah-Hartman
2013-09-25 0:11 ` [ 12/40] usb: ehci-mxc: check for pdata before dereferencing Greg Kroah-Hartman
2013-09-25 0:11 ` [ 13/40] USB: cdc-wdm: fix race between interrupt handler and tasklet Greg Kroah-Hartman
2013-09-25 0:11 ` [ 14/40] usb: config->desc.bLength may not exceed amount of data returned by the device Greg Kroah-Hartman
2013-09-25 0:11 ` [ 15/40] rculist: list_first_or_null_rcu() should use list_entry_rcu() Greg Kroah-Hartman
2013-09-25 0:11 ` [ 16/40] ASoC: wm8960: Fix PLL register writes Greg Kroah-Hartman
2013-09-25 0:11 ` [ 17/40] ALSA: hda - Add Toshiba Satellite C870 to MSI blacklist Greg Kroah-Hartman
2013-09-25 0:11 ` [ 18/40] brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error() Greg Kroah-Hartman
2013-09-25 0:11 ` [ 19/40] ath9k: always clear ps filter bit on new assoc Greg Kroah-Hartman
2013-09-25 0:11 ` [ 20/40] ath9k: fix rx descriptor related race condition Greg Kroah-Hartman
2013-09-25 0:11 ` [ 21/40] ath9k: avoid accessing MRC registers on single-chain devices Greg Kroah-Hartman
2013-09-25 0:11 ` [ 22/40] HID: pantherlord: validate output report details Greg Kroah-Hartman
2013-09-25 0:11 ` [ 23/40] HID: Fix Speedlink VAD Cezanne support for some devices Greg Kroah-Hartman
2013-09-25 0:11 ` [ 24/40] HID: validate HID report id size Greg Kroah-Hartman
2013-09-25 0:11 ` [ 25/40] HID: ntrig: validate feature report details Greg Kroah-Hartman
2013-09-25 0:11 ` [ 26/40] HID: battery: dont do DMA from stack Greg Kroah-Hartman
2013-09-25 0:11 ` [ 27/40] HID: check for NULL field when setting values Greg Kroah-Hartman
2013-09-25 0:12 ` [ 28/40] HID: usbhid: quirk for N-Trig DuoSense Touch Screen Greg Kroah-Hartman
2013-09-25 0:12 ` [ 29/40] media: v4l2: added missing mutex.h include to v4l2-ctrls.h Greg Kroah-Hartman
2013-09-25 0:12 ` [ 30/40] MIPS: ath79: Fix ar933x watchdog clock Greg Kroah-Hartman
2013-09-25 0:12 ` [ 31/40] intel-iommu: Fix leaks in pagetable freeing Greg Kroah-Hartman
2013-09-25 0:12 ` [ 32/40] ocfs2: fix the end cluster offset of FIEMAP Greg Kroah-Hartman
2013-09-25 0:12 ` [ 33/40] memcg: fix multiple large threshold notifications Greg Kroah-Hartman
2013-09-25 0:12 ` [ 34/40] mm/huge_memory.c: fix potential NULL pointer dereference Greg Kroah-Hartman
2013-09-25 0:12 ` [ 35/40] isofs: Refuse RW mount of the filesystem instead of making it RO Greg Kroah-Hartman
2013-09-25 0:12 ` Greg Kroah-Hartman [this message]
2013-09-25 0:12 ` [ 37/40] mmc: tmio_mmc_dma: fix PIO fallback on SDHI Greg Kroah-Hartman
2013-09-25 0:12 ` [ 38/40] of: Fix missing memory initialization on FDT unflattening Greg Kroah-Hartman
2013-09-25 0:12 ` [ 39/40] fuse: postpone end_page_writeback() in fuse_writepage_locked() Greg Kroah-Hartman
2013-09-25 0:12 ` [ 40/40] fuse: invalidate inode attributes on xattr modification Greg Kroah-Hartman
2013-09-25 4:35 ` [ 00/40] 3.4.63-stable review Guenter Roeck
2013-09-26 1:09 ` Greg Kroah-Hartman
2013-09-26 2:24 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130925001045.857541830@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alexander.deucher@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.